Cisco IDS 4215 signatures update

Similar Questions

• License on Cisco IDS 4215 box

  I have IDS 4215 (version 4) works fine for 2 years. All of a sudden I could not access the IDS4215 via the console or telnet last month. I rebooted it, but there is no change.

  Then we get the ROMMON prompt via CTRL-R. We performed procedures "Installation image of the system IDS-4215. We have installed version 5. So, we lost the old license for IDS 4215 ver 4. How can I get old license?

  We want to make the 4215 IDS to work with version 5 and the latest signatures. What should we do in this regard?

  It wasn't a license file in ver 4.

  Licenses were introduced in ver 5.

  Licenses are included as part of your Cisco Service for IPS maintenance contract.

  To see if you have a contract to day just go in the license of IDM configuration page and click on the button to say IDM to check cisco.com for a license.

  If she comes back with a license while your contract is up to date and everything is good.

  If she does not return with a license, then probably you don't have a Service Cisco IPS service contract for your sensor.

  Your Cisco or an authorized Cisco reseller sales Reprentative contract and request a quote for Service Cisco IPS contract for your sensor.

  Don't forget to give them the serial number of your sensor when you buy the contract so it is followed correctly in the database of contract of Cisco.

• Cisco IPS 4200 Signature Update

  We are currently under evaluation and implementation of the Cisco IPS solution to our security needs.

  Our supplier has said that the signature 'online' updates to Cisco IPS is not possible - this is a manual process and we need to charge the device if you want to update the files.

  Somehow, it defies logic. Surely, I think, that any IP address should have the possibility of obtaining signatures updated "online".

  I apologize, because that question is too basic in nature. But could someone shed more light on this?

  Thank you.

  You have auto update functionality of Cisco IPS version 6.0, take a look at the attached picture.

  Update of signatures is * recommended * that you reload the signatures (restart the sensor), although this is not mandatory.

  Our IPS has not been restarted for over two months now and everything is working ok.

  Automatic update

  Automatic update

  Automatic update

• How to monitor a Cisco IDS 4215 (version 6.0)?

  Hello

  I am new to this IDS and need an inexpensive or open source to collect and store the logs of this device.  It seems that the unit can only store a day or two of his own newspapers and I need to collect 1 year.  I have Red Hat linux machines at my disposal, but can use Windows devices or other forms of Linux if necessary.  It would be great if I could just have this thing log to a file on a Linux server on the local network. I can then configure scripts to view and create reports on the balls.

  I installed the IDM on my Windows desktop and can connect to the IDS, but don't see a way to collect newspapers, to trigger alerts by e-mail or create reports.  Is there something Cisco offers (without additional purchase) for this?

  Thank you

  Paul

  For email alerts, you can use IPS Manager Express http://www.cisco.com/en/US/products/ps9610/index.html I think that he will succeed up to 10 IPS sensors.

• If the IDS 4215 platform support E4 7.0 (2)

  Hello

  We are trying to upgrade the engine in our IPS and IDS devices. We have a single device IDS 4215 in our environment that installed with engine E3. Please let me know as this engine support E4 with 7.0 platform (2) version. If so, please update me with the name of the .pkg file. Thank you.

  Vinoth salvation,

  The IDS-4215 sensor does not support the version of the IPS 7.0 software. The latest version of the software supported on this platform is 6.0.

  He argues, however, E4 engine in combination with the version of the software 6.0 (6).

  To upgrade your sensor to the E4 engine (and use the latest signatures), improve it with the 6.0 (6) E4 software package pkg file.

  You can download this update from the link below:

  http://tools.cisco.com/support/downloads/go/PlatformList.x?sftType=Intrusion+Prevention+System+%28IPS%29+System+Upgrades&mdfid=278244333&treeName=Security&mdfLevel=Model&url=null&modelName=Cisco+IDS+4215+Sensor&isPlatform=N&treeMdfId=268438162&modifmdfid=null&imname=&hybrid=Y&imst=N

  If you are currently using version 6.0, you will just need the "IPS-engine-E4-req-6.0-6.pkg" file to upgrade the engine, if you are on an earlier version of the software, you will need to download "IPS - K9 - 6.0 - 6 - E4.pkg"

  Be sure to read the readme file before the upgrade:

  http://www.Cisco.com/Web/software/282549759/32618/IPS-Engine-E4.Readme.txt'

  Let me know if you have any other questions.

  Best regards

  Stijn

• IDS 4215 date and time change after restart

  Hello

  I am facing problem with cisco IDS 4215 (version 6.0), date and time of change in the device after reboot. What is the command to save the configuration. record or write mem does not work.

  Amarjeet Singh

  Once the date and time changes are applied Cisco IPS CLI, they should have been saved. No additional step of "savings" manually is necessary.

  Also, have you thought about Configure NTP on IPS server. IPS synchronizes time with NTP server, if there is no difference.

  I suggest you contact Cisco TAC and report the problem of equipment.

  Kind regards

  Sawan Gupta

• Resource needs memory IDS 4210 CODES signature updates

  I have ID 4210, see the version is displayed as follows:

  ID # sh ver

  Application partition:

  The Cisco Systems Version 1.0000 S37 Intrusion detection sensor

  2.4.18 OS version - 5smpbigphys

  Platform: IDS-4210

  With the help of 257458176 of 261312512 memory available bytes (98% of use)

  With the help of 1.1 G off bytes 17 G of disk space available (7% of use)

  I want to pass that ID to IDS - GIS - 4.1 - 4 - S100.rpm.pkg, but readme indicates firstly that I have to upgrade to Version 4.1 (1) S47 of 3,0000 S61 sensors must be updated with the 4.1 (4) S91 Service Pack before you apply the 4,0000 S100 Signature Update.

  Review of information, in order to upgrade to version 4.1 (1) S47, documentation also says IDS-4210 and IDS-4220 sensors of the series should be upgraded to 512 MB of RAM using a Cisco upgrade kit (part # ID - 4210 - MEM - U or ID-4220-MEM-U) until they can be upgraded with IDS software version 4.1 or later. This update is free for visitors with SMARTnet.

  Please let me know if, depending on the version of my show, I already have the memory requirements.

  Thanks for any help,

  To upgrade 4 - 4.1 - S100 just to first upgrade to version minor update 1.0000 1.0000 S37, followed by service pack 4,0000 S91 S47. Do not apply 4.1 (2) and 4.1 (3) before applying the 4.1 (4), 4.1 (4) is a service pack is cumulative.

  Your show version, looks like you have not upgraded to to the 512 MB of ram required. Once that you upgrade to the 512 MB version show should show something like

  With the help of 452706304 of 509276160 memory available bytes (88% of use)

  Hope this helps

• IDS 4215, good place for an interface sniff (LAN or DMZ)

  I have this sensor with two interfaces only at work, I was asked to check that

  See the IDSWORK version #.

  Application partition:

  The Cisco Systems Version 1.0000 S47 Intrusion detection sensor

  2.4.18 - 5smpbigphys-4215 OS version

  Platform: IDS-4215

  an interface that is Ethernet 0 connected to switch in the DMZ, and 1 Ethernet connected to switch 4005, logically I have to monitor DMZ not switch box 4005 (since I had only two interfaces, my case), I'm right?

  That means that ethernet 0 should be to sniff (surveillance) since it is connected to the DMZ and interface 1 for command and control, since it is connected to switch 4005, but according to cisco specifications

  http://Cisco.com/en/us/products/HW/vpndevc/PS4077/products_configuration_guide_chapter09186a008055df7d.html#wp1051279

  Table 5-2

  FastEthernet0/0: Interfaces supporting VLAN pairs Inline (port detection)

  FastEthernet0/1: Interfaces do not support Inline (command and control Port)

  Note: Cisco has mentioned FastEthernet, one I had Ethernet, makes all the difference?

  Because I did not have this configuration, he made by another, should I change this?

  It seems that your credentials are equipped with the basic ports (2 x Ethernet) with E0 C & C port, while E1 is followed by port.

  BTW, Ethernet/FastEthernet ports are in fact the same.

  To monitor your DMZ segment, then place the E1 in this segment, as E0 on inside segment where in addition to directing the Manager of its web management or CLI interface box, you probably can use basic VMS that comes free with it.

  And since you have dedicated switch to host the entire DMZ segment, you can easily monitor box (SPAN) all and send all traffic to the IDS.

  If you need to change the configuration, you may need to test at least to verify signatures is enabled/disabled and pc/mgt host is allowed to access the box and so on. But it is a good practice for audit and review the new config/setup, as it is a security zone, you need to do to monitor trust and you talk about all the possible threats, attacks or violations.

  HTH

  AK

• Ontario Regulation the upgrade of Version 4.0 of Cisco IDS to 5.0

  Dear Happs / marcabal

  I have one of the IDS 4215 4.1 (1) Version with the details attached. I want the same thing to 5.0 and 6.0. So I install the 5.0 (1e) S149 major to upgrade to 5.0 first release

  The following is written in the read me file for the package of service IPS-K9-maj-5.0-1e-S149.rpm.pkg

  "For ID-4215, you must also make sure that you have upgraded the BIOS to the version.

  5.1.7 and the ROMMON version 1.4 "

  So I downloaded the upgrade utility mentioned above; However, I need to know following

  (1) how to check the current BIOS and the ROMMON Version in ID

  2) to upgrade the BIOS and ROMMON Version, can I do my dekstop (Windows XP) as a server TFTP we manage remote (LINE of LEASE), customer IDS, or do I need to have a local instead of customers himself (in the cisco IDS network beach only) which can be made as TFTP server

  (3) also please let me know how do I know the IDS 4.0 license and if no license is available then, can still update us to version 5.0?

  There is no version 4.x license, licenses began only in version 5.0.

  You can improve your 4215 to version 5.1 or 6.0 unlicensed.

  The minimum versions of BIOS update and forms are easily searched on CCO.

• Signature - updated antivirus definition

  All,

  I worry a bit with the version of update of virus that I see when I run a 'see the version' on our IPS (AIP-SSM-10)

  I get the following output...

  Definition of signature:

  Update of the signature S369.0 2008-12-06

  Virus update V1.4 2007-03-02

  I thought the update of virus was included in the definitions of signature, and as a result, I would have expected the date should be the same on both (i.e. 2008-12-06).

  Can someone explain if that's OK? where I can get the latest virus update...

  Thanks in advance for your help

  Steve

  Steve-

  This isn't something you have to worry. This surfaces topic on a regular basis, so I'll quote two of the best answers of marcabal and mhellman.

  Posted by: marcabal - October 18, 2007, 11:30 am PST

  This is the latest version.

  V signatures are created by Trend Micro Systems when a major virus/worm outbreak occurs and an update of emergency is necessary.

  The V update can then be deployed via a Cisco ICS Management Server.

  But it was not a great emergnecy epidemic in the last 2 years that required a special signature update V.

  Instead the signatures of viruses/worms the last two years have come to be included in the procedure of updating signature standard and figuratively in our standard S signature levels without the need of special emergency updates.

  Often the vulnerability was already detected by an update of standard signature S before the virus/worm started to spread.

  Posted by: mhellman - January 31, 2008, 12:44 pm PST

  See:

  http://Forum.Cisco.com/eForum/servlet/NetProf?page=NetProf&Forum=security&topic=intrusion%20Prevention%20Systems/IDs&CommCmd=MB%3Fcmd%3Dpass_through%26location%3Doutline%40%5E1%40%40.2cbeb4ff

  http://Forum.Cisco.com/eForum/servlet/NetProf?page=NetProf&Forum=security&topic=intrusion%20Prevention%20Systems/IDs&CommCmd=MB%3Fcmd%3Dpass_through%26location%3Doutline%40%5E1%40%40.2cbe28c5

  http://forum.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Security&topic=Intrusion%20Prevention%20Systems/IDS&CommCmd=MB%3Fcmd%3Dpass_through%26location%3Doutline%40%5E1%40%40.1dde1bcf/0#selected_message

• 2651XM IPS Signature Update?

  Hello

  I have a 12.4 (25) running to 2651XM 256 MB / 32 MB and I want to update the IPS signature file.  I see that the last update for 256MB.sdf made since August 2008.  The recent IPS that I found is IPS-GIS-S518-req - E4.pkg of

  http://tools.cisco.com/support/downloads/go/PlatformList.x?sftType=Intrusion+Prevention+System+%28IPS%29+Signature+Updates&mdfid=277801011&treeName=Security&mdfLevel=Model&url=null&modelName=Cisco+2651XM+Multiservice+Router&isPlatform=N&treeMdfId=268438162&modifmdfid=278279418&imname=Cisco+IDS+Access+Router+Network+Module&hybrid=Y&imst=Y

  I tried the command

  property intellectual ips homeless location flash:\\IPS-sig-S518-req-E4.pkg

  &

  property intellectual ips homeless flash location: IPS-GIS-S518-req - E4.pkg

  but when I apply an IPS for an interface and execution "show ip IP addresses of all the ' no signature doesn't load and I get the message"invalid token ".

  I tried to see if the latest SDM will help too but nothing.

  My question is, what am I doing wrong or missing?  My router is too old to be able to get the latest signature files?

  Advice or tips to the right direction is appreciated.

  Thank you

  You have a version of IOS, which includes the old version of the IOS IPS feature (known as v4).  This version only supports signature updates using the SDF formatted files.  These files are is more updated.

  The updated signature file you found (ending in .pkg) is accompanied by appliances Cisco IPS signature update package and is not compatible with the IOS IPS feature set.

  The current IOS IPS feature (called v5) also uses the .pkg files.  You have to pass your 2651 IOS to a version of the T train such as version 12.4 (24) T2 for the newest IOS IPS.

  You can find more information about the features of IOS IPS here:

  http://www.Cisco.com/go/iosips

  To get started with IOS IPS v5:

  http://www.Cisco.com/en/us/products/ps6634/products_tech_note09186a008097db66.shtml

  Scott

• S371 signature Update error code

  I am trying to update my sensor to S371 and receive the following errors. I upgrade to a Director of virtual machines on a unit 4240. I was able to update S370 successfully. Any help is appreciated.

  I enclose the test in a file in the case of word wrap calendering.

  ERROR MESSAGE FROM THE DIRECTOR OF VIRTUAL MACHINES:

  My-sensor: Signature Update process

  Exception in the place of the sensor: the sensor is rebooted with 8,0000 E3S370 version

  instead of the version expected 5.1 (8) E3S371, but no errors were reported during the

  Update.

  Errors encountered during the update of sensor, this sensor update are abandoned.

  Errors encountered during the update of sensor, this sensor update are abandoned.

  ===================================================================================

  THE SENSOR ERROR MESSAGE CONSOLE:

  The message of [email protected] / * /-sensor

  (somewhere) at 18:26.

  Update IPS-GIS-S371-req-E3

  The message of [email protected] / * /-sensor

  (somewhere) at 18:26.

  Error when sending the sensorApp control operation. The restoration of old signatures.

  The message of [email protected] / * /-sensor

  (somewhere) at 18:26.

  Full update

  The message of [email protected] / * /-sensor

  (somewhere) at 18:26.

  UN-installing IPS-GIS-S371-req-E3.

  The message of [email protected] / * /-sensor

  (somewhere) at 18:27.

  Uninstall complete.

  Yes, it's a bad package, not just a problem on your side.

  Withdrawing now.

  I am unsure of your Setup, but the package of sensor s371 from here:

  http://www.Cisco.com/cgi-bin/tablebuild.pl/ips6-sigup

  can be used to update your sensor (s). This however leaves you with a version of the sensor out of sync to the version number for the CSM sensor.

• IDS-4215 virtual sensors

  Can I have several virtual devices on 4215 executes code 6.0?

  Unfortunately, IDS-4215 does not support many virtual devices.

  Here is the URL for your reference:

  http://www.Cisco.com/en/us/docs/security/IPS/6.0/Configuration/Guide/IDM/dmAnEng.html#wp1035318

• Questions of IDS-4215

  I bought this unit and I have problems with it, I did the restore and I put the new password and pick-me-up Dungeon to it, how to make out of it?

  CISCO SYSTEMS IDS-4215
  Embedded BIOS Version 5.1.7 03/02/04 11:20:35.01
  Compiled by dnshep
  Evaluate the Options of execution...
  Check for disc Image valid
  GRUB, loading stage1.5.

  GRUB loading, please wait...

  GRUB version 0.91 (632K lower / higher than 523264K memory)

  -------------------------------------------------------------------
  0: cisco IDS (vmlinuz - 2.4.26 - IDS-smp-bigphys}
  1: cisco IDS recovery
  -------------------------------------------------------------------

  Use the ^ and v keys to select which input is highlighted.
  Press ENTER to start the operating system selected, 'e' to change the
  orders before starting, 'a' to change the kernel arguments
  before you start, or 'c' for a command line.

  Entry 0 will be started automatically in 1 seconds.
  Start ' Cisco IDS (vmlinuz - 2.4.26 - IDS-smp-bigphys} ")

  root (hd0, 0)
  Filesystem type is ext2fs, partition type 0 x 83
  kernel (hd0,0)/boot/vmlinuz-2.4.26-IDS-smp-bigphys ro root = / dev/hdb1 had = flash)
  Console = ttyS0 bigphysarea = 16384
  [Linux bzImage, setup = 0 x 1400, size = 0x11b282]

  Linux version 2.4.26 - IDS-smp-bigphys ([email protected] / * / _build_master) (version gcc 2.96 20000731 (Red Hat Linux 7.3 2, 96-112)) #2 SMP Thu Aug 18 11:03:13 CDT 2005
  BIOS fitness card RAM:
  BIOS-e820: 0000000000000000 - 000000000009e000 (usable)
  BIOS-e820: 000000000009e000 - 00000000000a 0000 (reserved)
  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
  BIOS-e820: 0000000000100000-0000000020000000 (usable)
  BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
  0 MB HIGHMEM available.
  512 MB LOWMEM available.
  On the node 0 totalpages: 131072
  area (0): 4096 pages.
  area (1): 126976 pages.
  area (2): 0 pages.
  DMI does not exist.
  ACPI: Unable to locate the PDSP
  Kernel command line: ro root = / dev/hdb1 had flash = console = ttyS0 bigphysarea = 16384
  ide_setup: a = flash
  Local APIC disabled by BIOS - reactivation.
  Local APIC found and activated!
  The initialization of the #0 CPU
  Detected 845,655 MHz processor.
  Console: the unit dummy color 80 x 25
  Calibrating delay loop... 1684.27 BogoMIPS
  Memory: 449240 k/524288 KB available (kernel code of 1621 k, k 74656 reserved, 639 k data, 136 k init, 0 k highmem)
  Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
  Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
  Get cache hash table entries: 512 (order: 0, 4096 bytes)
  Buffer cache hash table entries: 32768 (order: 5, 131072 bytes)
  The page cache hash table entries: 131072 (order: 7, 524288 bytes)
  CPU: L1 I cache: 16K, D L1 cache: 16K
  CPU: L2 cache: 128K
  Architecture Intel machine control supported.
  Intel machine check reporting enabled on CPU #0.
  Enabling fast FPU save and restore... done.
  Allowing the use of unmasked SIMD FPU exception... done.
  Checking 'hlt' instruction... Ok.
  UNIFIX POSIX compliance test
  MTRR: v1.40 (20010327) Richard Gooch ([email protected] / * /)
  MTRR: detected mtrr type: Intel
  CPU: L1 I cache: 16K, D L1 cache: 16K
  CPU: L2 cache: 128K
  Intel machine check reporting enabled on CPU #0.
  CPU0: Intel Celeron (Coppermine) stepping 0
  by timeslice cut CPU: 365,62 usecs.
  Motherboard undetected SMP.
  Turned off turned on CPU #0
  Value of ESR before activating the vector: 00000000
  Value of ESR after activating the vector: 00000000
  Local APIC interrupt using timer.
  calibration of APIC timer...
  ..... CPU clock speed is 845,6568 MHz.
  ... bus clock speed host is 99,4889 MHz.
  CPU: 0, clocks: 994889, slice: 497444
  CPU0
  Waiting on wait_init_idle (card = 0x0)
  All processors have been init_idle
  PCI: PCI BIOS revision 2.10 to 0xff6a9, last bus = 1 entry
  PCI: Using configuration type 1
  PCI: Hardware probing PCI
  PCI: Hardware probing PCI (bus 00)
  Limitation of direct transfers of PCI/PCI.
  ISAPNP: digitization of the PnP cards...
  ISAPNP: no Plug Play devices & found
  Linux NET4.0 for Linux 2.4
  Swansea University Computer Society NET3.039-based
  The initialization of the RT netlink sockets
  From kswapd
  bigphysarea: 16384 pages for 0xc1606000.
  Responsible journaled block device driver
  Pty: 2048 Unix98 ptys configured
  keyboard: there is no Timeout - at THE keyboard? (ed)
  keyboard: there is no Timeout - at THE keyboard? (f4)
  Series c 5.05 driver version (2001-07-08) with MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI active ISAPNP
  ttyS00 at 0x03f8 (irq = 4) is a 16550
  ttyS01 at 0x02f8 (irq = 3) is a 16550
  V1.10F real time clock driver
  Initialized RAM disk driver: 16 discs RAM 4096 K size 1024 blocksize
  loop: loaded (max 8 devices)
  LPC: version 0.1 (August 18, 2005)
  Uniform cross-platform E-IDE review pilot: 7.00beta4 - 2.4
  IDE: assuming that the speed of the bus system 33 MHz for modes PIO; Override with idebus = xx
  PIIX4: Controller IDE PCI slot 00:07.1
  PIIX4: chipset revision 1
  PIIX4: not 100% natively: will probe IRQS later
  ide0: BM - DMA at 0xf800-0xf807, BIOS settings: had: pio, hdb:pio
  IDE1: BM - DMA at 0xf808-0xf80f, the BIOS settings: hdc:pio, hdd:pio
  has: SanDisk SDCFB-256, CFA HDD
  HDB: IC25N020ATCS04-0, ATA drive
  has: disable DMA (U) to SanDisk SDCFB-256
  BLK: queue c03bf1a8, I/O limit 4095 MB (mask 0xffffffff)
  ide0 at 0x1f0-0x1f7, 0x3f6 on irq 14
  has: attachment the ide disk driver.
  had: task_no_data_intr: status = 0 x 51 {DriveReady SeekComplete error}
  had: task_no_data_intr: error = 0 x 04 {DriveStatusError}
  had: 501760 sectors (257 MB) w/1KiB Cache, CHS = 497/16/63
  HDB: attached the ide disk driver.
  HDB: host protected area-online 1
  HDB: 39070080 sectors (20004 MB) w/1768KiB Cache, CHS = 2432/255/63, UDMA (33)
  Check the partition:
  has: hda1, hda2, hda3
  HDB: hdb1, hdb2 hdb3 hdb4
  IDE: late registration of the driver.
  Review SCSI subsystem driver: 1.00
  I2C-core. o: i2c core module version 2.8.7 (20040611)
  I2C - dev. o: i2c/dev entries driver module version 2.8.7 (20040611)
  I2C - proc.o version 2.8.7 (20040611)
  I2C-i801 version 2.8.7 (20040611)
  Net4: Linux 1.0 for NET4.0 TCP/IP
  IP protocols: ICMP, UDP, TCP, IGMP
  IP: routing 4096 buckets cache hash table, 32Kbytes
  TCP: Hash tables configured established 131072 bind (65536)
  Linux IP router multicast 0.06 and PIM - SM
  Net4: Unix domain sockets 1.0/SMP for Linux NET4.0.
  kjournald starting.  Commit interval 5 seconds
  Ext3-fs: mounted filesystem with ordered data mode.
  VFS: Mounted root (ext3 file system) readonly.
  Release of memory used kernel: 136 k released
  INIT: initialization of version 2.84
  Welcome to CIDS v4.1 (1) S47 (Phoenix)
  Mounting proc filesystem: [OK]
  Configuration of the kernel parameters: [OK]
  Setting clock (localtime): my Apr 19 19:14:53 UTC 2010 [OK]
  Activation of swap partitions: [OK]
  Hostname parameter sensor: [OK]
  modprobe: can't open dependencies file /lib/modules/2.4.26-IDS-smp-bigphys/modules.dep (no such file or directory)
  Checking file system root
  / dev/hdb1: clean, 27334/83520 files, 56775/166666 blocks
  [/sbin/fsck.ext3 (1)-/] fsck.ext3 - a/dev/hdb1
  [OK]
  Back the root read / write file system: [OK]
  Find the module dependencies: depmod: can't open /lib/modules/2.4.26-IDS-smp-bigphys/modules.dep for writing
  [NOT]
  Checking of file systems
  / dev/hdb3: clean, 12 files, 2008, 1300/8032 blocks
  / dev/hda1: clean, 33/2656 files, blocks of 4184/10584
  / dev/hdb4: clean, 32/2280320 files, blocks 80505/4558443
  / dev/hda3: clean, 20/58232 files, 84949/232848 blocks
  Check all file systems.
  [/sbin/fsck.ext3 (1)-/ bootmnt] fsck.ext3 - a/dev/hda1
  [/sbin/fsck.ext3 (2)-/ usr/cids/idsRoot/shared] fsck.ext3 - a/dev/hdb3
  [/sbin/fsck.ext3 (2)-/ usr/cids/idsRoot/var] fsck.ext3 - a/dev/hdb4
  [/sbin/fsck.ext3 (2)-/ mnt/recovery] fsck.ext3 - a/dev/hda3
  [OK]
  Mounting local filesystems: [OK]
  Activation of local file system quotas: [OK]
  Activation of the swap space: [OK]
  Non-interactive startup entry
  Setting the network parameters: [OK]
  Set up the loopback interface: [OK]
  modprobe: can't open dependencies file /lib/modules/2.4.26-IDS-smp-bigphys/modules.dep (no such file or directory)
  Setting up interface eth1: [OK]
  Start recorder system: [OK]
  Kernel start recorder: [OK]
  Load keymap: [OK]
  Loading system font: [OK]
  The initialization of the random number generator: [OK]
  Audit of the allocated kernel memory: [OK]
  No XL map shows
  Charge Cidmodcap: WARNING: the kernel-module version mismatch
  /lib/modules/CID/cidmodcap.o was compiled for kernel version 2.4.18 - 5smpbigphys
  While this kernel version 2.4.26 - IDS-smp-bigphys
  /lib/modules/CID/cidmodcap.o: symbol register_chrdev_Rsmp_0450333d pending
  /lib/modules/CID/cidmodcap.o:
  Tip: You are trying to load a module without a GPL compatible license
  and unresolved symbols.  Contact the provider module for
  help, only they can help you.

  [NOT]
  Creation of boot.info [OK]
  Checking for changes to the system since the last boot [WARNING]
  Check the identification of the model [OK]
  Model: IDS-4215
  Error: mainApp has not started
  From sshd: [OK]
  From xinetd: [OK]
  From crond: [OK]
  From anacron: [OK]

  Login: cisco
  Password:
  You are required to change your password immediately (years)
  Change password for cisco
  (ongoing) UNIX password:
  New password:
  Retype the new password:
  NOTICE *.
  This product contains cryptographic features and is under the United States
  and local laws governing the import, export, transfer and use. Delivery
  Cisco cryptographic products does not imply permission to third parties to import,
  export, distribute or use encryption. Importers, exporters, distributors and
  users
  sensor connection: cisco
  Password:
  NOTICE *.
  This product contains cryptographic features and is under the United States
  and local laws governing the import, export, transfer and use. Delivery
  Cisco cryptographic products does not imply permission to third parties to import,
  export, distribute or use encryption. Importers, exporters, distributors and
  users are responsible for compliance with U.S. and local country. With the help of
  This product you agree to comply with the regulations and laws in force. If you
  are unable to meet the United States and local laws, return the product.

  A summary of U.S. laws governing Cisco cryptographic products to:
  http://www.Cisco.com/WWL/export/crypto

  If you need assistance please contact us by mail at
  [email protected] / * /.

  connection of the sensor:

  Since you did the recovery I assumeyou already tried to the unit powering down and back up.

  This is a weird problem I havn't seen before, but sometimes the sensors get currupt and need a full reimage to return to normal.

  I would like to download the most recent image 4215 and TFTP in your sensor in ROMMON.

  http://www.Cisco.com/en/us/partner/docs/security/IPS/6.0/installation/guide/hwImage.html#wp1030874

  -Bob

• Signature updates

  Hello

  I very much back to IPS I want to update my AIP - SSM 10 Mr. signatures as if now on cisco site there are updates the signature file, the most recent is S495, I m in my EPI S300, which is so is to update all small parcel until S495 signature that I have to download maually 1 by 1 or any link to download bulk signing up the last while.

  Thank you

  Haya;

  You should make sure you are running a version of IPS software that contains the E4 analytical engine (6.0 (6) E4 E4 6.2 (2) or 7.0 (2) E4).  You can then download the latest signature update package (S491) and apply this update.  You don't need to apply each update of signature package.

  Scott