silent uninstall ODAC 12 c module 4 and Oracle development tools

Similar Questions

• I get a message "uninstalled failed" when you try to uninstall all applications of CC 2014 and the cleaning tool is of no help. Any ideas?

  I get a message "uninstalled failed" when you try to uninstall all applications of CC 2014 and the cleaning tool is of no help. Any ideas?

  Hello

  If please close the process below for task/monitor activity Manager and try again.

  

  Hope that helps!

  Kind regards

  Sheena

• AMT problem with Oracle 11 g ODAC 11.1.0.6.21 with Oracle Developer Tools

  I installed the full
  Oracle 11g ODAC 11.1.0.6.21 with Oracle Developer Tools for Visual Studio
  
  now I'm in the good old ' [ORA-12154: TNS: could not resolve the connect identifier specified] "error.
  
  I copied the tnsnames.ora even as that used on the db Server
  on the client 'C:\Oracle\product\11.1.0\client_2\Network\Admin '.
  The host name is just like a normal ping works. TNSping is not available.
  but I get the [ORA-12154: TNS: could not resolve the connect identifier specified] error.
  The listener is running and the instance as well since everything works on the source server.
  
  
  I tried with
  
  SET path=c:\oracle\product\11.1.0\client_2\bin
  
  but tnsping is still not recognized.
  
  sqlplus works however when I put in
  SET path=c:\oracle\product\11.1.0\client_2\
  
  
  What is going on...

  Hello

  No, actually, I mean try including your IP in tnsnames as

  CONTROL =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP)(HOST = **)(PORT = 1521))
  (CONNECT_DATA =
  (SERVER = DEDICATED)
  (SERVICE_NAME = Control)
  )
  )
  

  and then, try, you can also try SQLNET.authentication = (NONE), also make sure you provide safely

  HTH

  Thanks and greetings
  VD

• Removed Mcafee preinstalled and ran development tool but mcagent.exe is in the behavior of icon settings

  My computer could not install the updates of Windows because of missing or corrupted files. I used the refreshment to repair the damage that also restored to pre-installed Mcafee. I uninstalled programs and also executed Development tool. Mcagent.exe appears in the icon behavior settings. What is the Mcafee files left or malware? I had already run Malwarebytes and that he had removed the rogue system tool. I would appreciate help with this.

  

  Hi Dave,.

  Thank you for keeping us posted.

  Follow these steps.
  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  (a) press the Windows key + R and type regedit to open the registry editor.

  (b) go to: HKEY_CURRENT_USER Settings\Software\Microsoft\Windows\CurrentVersion\TrayNotify

  (c) in the right panel to find PastIconStream and IconStream, delete both.

  (d) close the registry window.

  (e) open the Task Manager by pressing Ctrl + Alt + Delete together.

  (f) scroll the list of processes, to find Windows Explorer,

  (g) in the lower right corner, click on restart.
  Now, check the Notification area.

• Drag and Drop development tool for OA Framework

  Hello! Are there Drag and Drop of the development tools for OAF for ebs R12? I know this has been asked before, but most of the positions have been since 2007 or 2009. Maybe there was a recent version of JDeveloper which supports Drag and Drop?

  Thank you!

  Hello

  According to my understanding.

  Drag and Drop the features not available in Office Tools framework Jdeveloper.

  You need to declaratively or programmatically implementation.

  Thank you

  Dilip

• Accidentally uninstalled something, now disabled modules, Firefox 3.6.28

  I was recently a few cleaning of old programs, I no longer use via Control Panel > Add/Remove Programs (Windows XP), and subsequently my modules suddenly stopped working. It didn't say whether they are disabled or anything, but it's like I've all disabled when I know I don't have. I think it would have been the Bar 'Bing' I uninstalled who did it, but why would that have something to do with my Firefox Add - ons? Any help?

  Are what modules you referring?

  • Tools > Modules > Extensions

  It is possible that there is a problem with the files that store the registry extensions.

  Delete the files (extensions.sqlite, extensions.ini, extensions.cache) extensions.* and compatibility.ini in the profile folder of Firefox to reset the extensions registry.

  • https://support.Mozilla.org/KB/profiles

  New files will be created if necessary.

  See "extension corrupted files:

  • http://KB.mozillazine.org/Unable_to_install_themes_or_extensions
  • https://support.Mozilla.org/KB/unable+to+install+add-ons

  If you see disabled extensions, is not compatible, in "tools > Modules > Extensions ' and then click the Tools button, on the left side of the search bar (or click on the"Find updates"button in older versions of Firefox) to check if there is an available update compatibility.

  If that didn't help then also try to delete the file addons.sqlite.

• I installed 4.0 and all my favorites were there, so I uninstalled 3.6, reopened 4.0 and all my favorites have disappeared.

  I installed Firefox 4.0 and all my favorites were there, so I uninstalled 3.6, reopened 4.0 and all my favorites have disappeared.

  This has happened

  Just once or twice

  Is today

  Sorry, it seems that you have selected the option to remove my Firefox personal data and customizations when you uninstalled Firefox 3.6. This option removes all the personal data for all versions of Firefox you have installed.

  Any chance that you made a backup of these data?

• How do I uninstall Satellite L300 - 11 q Vista and install Windows XP

  Hello!

  Please help: How do I uninstall Windows Vista from my laptop and install Windows XP?
  Should I do something with discs and seized BIOS, or I can just format C drive and then install XP CD-drive?

  How can I make a recovery disk before you uninstall Vista?

  Thank you very much!

  Hello

  It's very easy if you want to get rid of Vista simply boot from the Windows XP CD, format the HARD drive and install XP on partition C instead of Vista.
  That s it.

  I put t know what laptop have you but the laptop most recent are equipped with the SATA controller and the SATA driver must be installed or included in the CD of Win XP to install XP on the HARD drive. The SATA driver is part of the Manger of Intel Matrix Storage, which can be downloaded from the Intel site or page of the Toshiba driver.

  Just FYI; in this forum, you can find a lot of details in the various messages on the Intel storage Manger. Just use the search option.

  Good bye

• cDAQ-9174 with modules 9225 and 9239 for issue of power measurements...

  Hello to one and all.

  I do turn a cDAQ-9174 with modules 9225 and 9239 to measure the voltage (120, 208-240, 277 VAC) and current (via the clamp amp i400, Fluke - 10mA/exit A) respectively.

  I have the set scale scale Differential No. (1:1 I guess) for 100: 1 for current and voltage.  With the acquisition mode set to "N samples", 10 samples to read, at the rate of 500 m.  This feeds into 'EPM_Power.vi' (polymorphic VI of the palette of EMP... can be downloaded here, http://sine.ni.com/nips/cds/view/p/lang/en/nid/209826)

  I try to check my numbers with an Analyzer of power quality of 435 Fluke and supporting that upward is a Fluke 179 True RMS DMM with clamp amp i200 (for current playback)

  Now, I'm running is my numbers I take data look like they're following a curve of fishing... the averages are on the right, but when my blood pressure is expected to be relatively stable, it's over the map... same story with my current readings.  I tried several different filters without success.  I would like to have relatively stable values for voltage and current so my other values are correct.  Is there a signal conditioner or filter that will help with this?

  As always, a point in the right direction would be greatly appreciated!

  Thank you!

  Chad

  Hi, Will,

  Your request for a screenshot actuall lead me to the solution.  Not enough samples!  I took little data too slowly and only seeing part of the wave of fishing AC each iteration.  .. that became glaring when I tried to this graph.  So I increased my sampling of 100 to 5 Hz and things seem to have settled things down a bit.  Thank you for the good question!

  SH?

  C

• When I try to uninstall a program it says another program is already uninstalled but ITI is never ending and I don't know what program is that the uninstall is

  When I try to uninstall a program, what a popup say please wait program is already uninstall a program, but never stops and I can not know what program he talks

  Hello

  1. what operating system do you use?

  2 did you change on your computer?

  I suggest you to follow the methods and check.

  Method 1:

  Problems installing and uninstalling programs on Windows computers

  http://support.Microsoft.com/kb/2438651

  Method 2:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

• Is it ok to uninstall/remove the XP in 2001 and 2005 software updates?

  Is it ok to uninstall/remove the XP in 2001 and 2005 software updates? I have a whole list of updates over the years. Should I just keep piling up? Or they build with each other?

  Original title: is it ok to uninstall/remove the XP software updates from 2001 to 2005? I have a whole list of updates over the years. Should I just keep piling up? Or they build with each other?

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-files/can-i-delete-over-100-foldersfiles-with-a-name/dfa16261-f3d0-4ab7-b519-91631b44b3de

  You can create more free space in C in carrying one of the measures suggested below.

  The default allocation for the restoration of the system is 12% on your C partition is more generous.

  I have them would be reduced by 700 MB.

  Make my computer right click on your icon, and select System Restore.

  Place the cursor on your C drive select settings but this time find the slider and drag it to the left until it shows 700 MB and output.

  When you get to the settings screen, click on apply and OK and leave.

  A flaw that might be useless which is for temporary internet files, especially if you keep no copies on the disk offline.

  Setting the default value is 3% of the walk.

  Depending on your attitude to copies offline, you could bring it to 1% or 2%.

  In Internet Explorer, select Tools, Internet Options, general, temporary Internet files, settings to make the change.

  At the same time, look at the number of days, the story stands.

  The default allocation for the basket is 10% of the disk.

  Change to 5%, which should be enough.

  In Windows Explorer hover over your Recycle Bin, right click and select Properties, Global and move the slider from 10% to 5%.

  However, try to let you become so complete that if it is complete and you delete a file by mistake it will bypass the Recycle Bin and have gone forever.

  If your drive is formatted as NTFS another potential gain arises with your operating system on your C drive.

  In the Windows directory of your C partition you will some uninstall files in your Windows folder in general: $NtServicePackUninstall$ and $NtUninstallKB282010$ etc.

  These files can be compressed or not compressed.

  If compressed text the name of the folder appears in blue.

  If not compressed you can compress.

  Right-click on each folder and select Properties, general, advanced, and check the box before you compress contents to save disk space.

  On the general tab, you can see the winning amount by deducting the size on disk size. File compression is only an option on an NTFS formatted disk partition / partition.

  Select Start, all programs, accessories, System Tools, system information, Tools, Dr. Watson, and make sure the box in front of "Add to the existing rating" is NOT checked.

  This means that the next time that the log is written it will crush rather than adding to the existing file.

  The setting of maximum size by default for Event Viewer logs is too big.

  Reset the maximum value for each log from 512 KB to 128 KB and set it to crush.

  http://support.Microsoft.com/kb/308427/en-us>

  Select Start, all programs, accessories, System Tools, disk cleanup to empty your trash and delete temporary Internet files.

  Also select Start, all programs, accessories, System Tools, disk cleanup, more Options, System Restore and delete all but the last system restore point. Run Disk Defragmenter.

  --

  I quote Gerry C J Cornell - a regular contributor here

  UTC/GMT is 21:33 Tuesday, April 17, 2012

• Impossible to uninstall a program from the programs and features

  Original title: uninstall a program
  Windows Vista; Programs and features; uninstall a program; Choose a ro unstall program, but no "Uninstall" icon is available to perform an uninstall.

  Hello chaziam,

  This is a good tutorial with screenshots of how to uninstall programs and features.
  Click here for a link to the tutorial.

  Please answer back with an update and let us know if it helps.

  Thank you

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• cannot update, uninstall or new installation of itunes and the programs associated with lack of msi files

  cannot update, uninstall or new installation of itunes and the programs associated with lack of msi files

  Hi kenau78,

  a. this problem during installation?

  b. you install an iTunes 32-bit version or 64-bit?

  c. What is the CPU architecture, 32-bit or 64-bit?

  I suggest you to contact the Apple support also, because the problem is with iTunes, from the link given below.

  http://www.Apple.com/support/

  You can also ask your question in the discussion forums Apple from the link below.

  http://discussions.Apple.com

  Concerning

  Arona - Microsoft technical support engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• I want to uninstall the upgrade of windows 7 and go back to Vista.

  This device comes preinstalled with Vista so that I only have the recovery disks that I made when I first set up the computer.  How can I uninstall the upgrade of windows 7 and reinstall Vista?

  BogeyB,

  If you have made a real upgrade (overlay on Vista), you might be surprised.  Click on the computer and open the D Recovery drive.  Open the folder named Recovery. Look at the bottom left corner.

  What is the date of creation?  Mine is from 2007.  I do not superimpose WIN 7 until 2011, but the recovery is still 2007.

  It's actually your full version of Vista recovery... it didn't get deleted or altered, except if you did.

• Impossible to uninstall Silverlight "insert disk"Microsoft Silverlight"and click OK.

  Original title: worm Microsoft Silverlight 4 can't update ver 5

  I am running windows 7 and am trying to upgrade Microsoft Silverlight version 4 to version 5 (5.1.10411.0) (4.1.10111.0) via windows update.

  However, the installation fails and then when I try to uninstall manually, I get a pop up saying: "insert disc"Microsoft Silverlight", and then click OK."  I can't continue because I know that I have not installed on a drive.

  Any help would be appreciated.

  Hello

  Follow the methods mentioned below:

  Method 1:
  Check out the suggested link to repair the corrupted installation of Silverlight

  http://support.Microsoft.com/kb/2608523/en-us?SD=RSS&SPID=12929

   

  Method 2:

  Try to uninstall Silverlight 4 using Microsoft Fix and check:

  a. to do this run the Fixit tool from the following links.

  b. click on the link below and select run now button.

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

  c. After you download and run for the first time

  d. Select run on window smallpop and select run on Internet Explorer-security warning window.

  e. Select detect problems and allow me to select patches to apply.

  f. Select UN-installing.

  g. after the selected audit option that you need to uninstall, and then click next to uninstall. Restart the computer.

  h. now trying to install silverlight 5 manually and check.

  i. http://www.microsoft.com/silverlight/

  If the problem persists, consult the link suggested

  http://forums.Silverlight.NET/

  I hope this helps. Get back to us with results.