simple driver for my hp DVDRAM GT80N

Similar Questions

• I need the driver for communication controller simple pci for Aspire 4820TG laptop

  I need the driver for communication controller simple pci for Aspire 4820TG laptop

  In fact, im doing the first batch of updates to windows and the yellow of the magically missing Pavilion, so im good now, thanks for the reply!

• Windows cannot load the device driver for this hardware (HL-DT-ST DVDRAM GH40F SCSI CdRom Device) because the driver may be corrupted or missing. (Code 39)

  Original title: the answer useful?

  Help, please! Windows cannot load the device driver for this hardware (HL-DT-ST DVDRAM GH40F SCSI CdRom Device) because the driver may be corrupted or missing. (Code 39)

  Hello

  Code 39 means that the driver is corrupted or missing.

  Please make all below even if you have done some before as it is often the set of operations which solves
  the question.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  --------------------------------------------------------------

  Also check with your system manufacturer to see if there are any updated drivers for your DVD. Or even if it
  are you can reinstall the 'old'. Many use Windows default drivers however some special aura
  ones. Also check the website of the manufacturer of the car.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• ProBook 470, windows 8.1 - missing driver for: PCI simple communication controller

  Hello

  I installed on my new laptop windows 8.1. from the Device Manager, it shows that miss me the PCI controller driver simple communications. What does this product do? and how do I install the driver for it? could not find any solution yet.

  Hello:

  Go to the page of the driver and support for your laptop and install the Intel Management Engine Interface driver, which is listed under the section Chipset.

  Since you did not specify if you had a 470 G0 or G1, which is the best I can do without knowing this info.

  The version of the driver IMEI is different for each model Gx 470.

• Windows 7 driver for a Simple PCI controller

  I installed upgrading Lenovo Windows 7 Professional on my R400 (7443-CTO) of Windows XP Professional.  Watch ThinkVantage tools several times I need a driver for the controller of the PCI 'Simple '.  I could not find this driver on the Lenovo support site.  Any assistance to help solve this problem would be appreciated.

  No problem and glad you found it useful.

  When you say that you do not see a shortcut for the Lenovo Toolbox under "All programs" I assume you mean in "All programs" in the Windows startmenu? Normally after installation of Toolbox Lenovo should be an icon under "all programs-> Thinkvantage". You do not have a Thinkvantage folder under "all programs"? If Yes and you want this shortcut somewhere else you can copy the shortcut where you want by using the standard Windows features. If you do not have a shortcut for Lenovo Thinkvantage Toolbox at all you can create an and point in the file "C:\Program Files\PC-Doctor\pcdlauncher.exe". (assuming that you are using English Windows or it could be "Program Files" in another language). Don't know what you need help here. Do you need help and some tips how to add shortcuts to the startmenu in Windows?

  Regarding the dialog box where there will be PC-Doctor change your computers, which is the feature (UAC) Windows user access control or that given by the Lenovo Toolbox dialog? If UAC, I believe that the only solution would be to accept this dialog box or lower settings or turn off UAC, but which would also reduce the security on your computer.

• Driver for PCI Simple Communications Controller for 32 bit Gateway MX 3210

  I installed a new hard drive in a gateway MX 3210, 32-bit and installed Windows 7. Device Manager shows missing me the driver for the controller PCI of communication Simple, so first I went to support Gateway with no luck, then tried several other sites, with no luck. Can someone help me find this driver?

  I'm glad that you solved.

  Happy new year!!!

• HL-dt-st dvdram gsa-t20n ata device. Windows cannot load the driver for this hardware device. Windows Vista.

  my cd/dvd drive will not read the CD and does not appear in my computer. I get the message "windows cannot load the driver for this hardware device" in the details of the properties of the device above. How can I fix it? My operating system is windows vista and I can only find windows solutions that do not work.

  Hello

  1. were there any (hardware or software) changes to the computer?

  Run the FixIt and check if the problem is solved or not.

  Your CD or DVD drive cannot read or write media (Fixit)

  Your CD or DVD drive is missing or is not recognized by Windows or any other programs (Fixit)

  Hope that helps.

• HP DVDRAM GT80N has stopped working

  New HP laptop. HP DVDRAM GT80N has stopped working, have now error Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) Controls have found the driver installed, suggestion to roll back does not work because the option is not available. Please help solve this disorder.

  Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)

  {Unable to load device driver}
  HS device driver could not be loaded.
  Error status is 0 x %x

  Try to delete the value of the AFC.

  To delete the value from the AFC entry double-click LowerFilters and under value data, delete AFC > OK

  Create a system restore point beforehand and restart the computer after.

  The value of the AFC would represent the afc.sys driver which can indicate the software Arcsoft has been uninstalled and the value of the AFC has been left behind the creation of the question.

• Satellite 1690 win2000 and driver for pci CSC!

  I have a 1690CDT Satellite and my modem will not work. I think I need the driver for my pci Simple Communications Controller, but I'm not. Can anyone give me a tip where I can find it? I use win 2000 now, but from the beginning I had win98.
  Thank you very much!!

  Hi Peter

  It won't be easy. As far as I know W98 driver may not work properly with W2000. W2000 is not supported for this series of laptop. Have you already tried to install the modem using the standard driver? In install new modem under Select manufacturer types of modems Standard and modems select a standard modem with good speed please.

  Sorry but I don't have an alternative.

• Re: Unable to find driver for PCI VEN_8086 & DEV_2A44 for Tecra M10 - 10z

  Can not find the driver for: what is shown in Everest:

  PCI -? Simple communications
  PCI\VEN_8086 & DEV_2A44 & SUBSYS_00011179 & REV_07
  @system32\DRIVERS\pci.sys,#65536; %1, %2, function %3;(0,3,0) unit PCI bus

  Intel GL40/GM45/GM47/GS45/PM45 Chipset - Host Embedded Controller Interface 1 (HECI1) [B - 3]

  Does anyone have any ideas?

  Hello

  It is very good that you posted the vendor and device ID because you can search with these codes here:
  http://www.PCIDatabase.com

  The device seems to be the Intel Management Engine Interface

  So in your case I would try installing the chipset driver. You can download it from the Web from Toshiba website!

• Compatible hard drives for Portege 3480CT

  Hello

  I have a Portege 3480CT and I need to replace its 12 GB (IBM & reg Travelstar) drive hard internal since the former on a developed bad blocks. Now, I assumed that it would be relatively simple, but I was wrong.

  In any case, I got a replacement 2.5 "HD (this time a Hitachi Travelstar, 20 GB drive), but I couldn't make it work. I ran the program from IBM/Hitachi diagnosis and while the old 12 GB HDD is detected and removed ok, the 20 GB does not even get detected (i.e., seems that nothing is on the line of the IDE).

  It was suggested to me by IBM and Hitachi that there is a list of compatibility to their hard drives, and may not be supported (http://www.hitachigst.com/hdd/support/compatibility.htm), but I could not find my disc on their list (model is HTS424020M9AT00). Basically, what I want to know is what drives * are * compatible or what my problem with the laptop is otherwise.

  For more info, when I try to install Win2k, I get an ArcRead failure, probably because he thinks that the drive does not exist.

  Thank you.
  Stuart

  Hello

  I guess that there is problem with drive HARD and false parameter who decide if the HARD drive is the master or slave.

  In my opinion you should contact the Service partner to ask them which HDD is suitable for your device. You can also check on the net and picking up some information because there are a lot of different suppliers where you can buy the HARD drive. I also found information that it is possible to use the 40 GB HARD drive for your unit, but it must be built in by seller.

• Conexant Audio Driver for Windows 7

  Hi all

  I am a user of HP Pavilion dv1000 laptop (PR428UA #ABA), which is a very primitive model, but after upgrade the RAM to 1 GB, I changed the OS from Win XP to Win 7, and it's useful for now. In my view, that it is faster than when it was on XP.

  The problem is, I can't get the audio driver Conexant Cx20468 @ Intel 82801DBM ICH4-M - AC 97 Audio Controller [B-1], for Windows 7.

  Yes, I already checked several messages in this forum and tried the similar drivers such as sp40270.exe or sp37816.exe.

  But it does not work.

  What I have to give up this challenge because he's too old for laptop?

  Thank you.

  Hi, Jun:

  Sorry, that didn't work. I was hoping he would because it was an AC-97 audio driver.

  I have another simple idea that you can try.

  If you have your laptop connected to the internet, click the audio device in Device Manager. Click the driver tab click on Update driver. Select the automatic search method and I hope that Windows Update will download and install an audio driver for it.

  I'm sure that your laptop should be able to run Windows 7, including audio.

  If this does not work, try this method of complicated... change the driver XP for work in W7... but you should be able to do. Just follow the instructions carefully:

  1. download the sp30399 driver.   You can get it here:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-31530-1 & LC = on & CC = US & DLC = in & Product = 1816346 & os = 228 & lang = in
  
  2. run sp30399.exe.
  
  3 go to the extracted folder (default location is: c:\SWSetup\sp30399)
  
  4. change qta3091.inf:
  Search code block:
  [Conexant]
  % * WDM_AMCAUD. DeviceDesc%=WDM_AMCAUD,PCI\VEN_1002 & DEV_4370 & SUBSYS_3091103C
  
  and add this line to the title:
  % * WDM_AMCAUD. DeviceDesc%=WDM_AMCAUD,PCI\VEN_10B9 & DEV_5451 & SUBSYS_0024103C & REV_02
  
  So the result would look like this:
  [Conexant]
  % * WDM_AMCAUD. DeviceDesc%=WDM_AMCAUD,PCI\VEN_1002 & DEV_4370 & SUBSYS_3091103C
  % * WDM_AMCAUD. DeviceDesc%=WDM_AMCAUD,PCI\VEN_10B9 & DEV_5451 & SUBSYS_0024103C & REV_02
  
  Note: Copy this part of the Device Manager > Multimedia Audio Controller > Details > hardware ID:
  PCI\VEN_10B9 & DEV_5451 & SUBSYS_0024103C & REV_02
  
  You can have a slightly different description of the device. If you want to be sure, go to Device Manager, open the properties of the audio device not recognized, select the "Détails" tab and select "Hardware ID" in the drop-down list properties drop-down list. Copy the listed top hardware ID string and replace the description of device I wrote above, with one you see.
  
  So the final result is as follows (if you have a description of different device.):
  [Conexant]
  % * WDM_AMCAUD. DeviceDesc%=WDM_AMCAUD,PCI\VEN_1002 & DEV_4370 & SUBSYS_3091103C
  % * WDM_AMCAUD. DeviceDesc%=WDM_AMCAUD,PCI\VEN_INSERT YOUR DESCRIPTION OF THE DEVICE ID
  
  5. now, all you have to do is to install the driver manually through the Device Manager (Driver tab > update driver > select manual installation method and browse to the extracted driver folder (sp30399).)

  Good luck and please let us know if you get the sound to work.

  Paul

• Satellite A-L50-18R - need driver for 'PCI Communications' device

  Hi, I'm not able to find a driver for my laptop TOSHIBA Satellite L50-A-18R. The driver is "CONTROLADORA COMUNICACIONES PCI SIMPLE". I put t know what driver I need to download the Web of support. Sorry for my English.

  I have 64 bit windows 8.1!

  Thank you

  Hello

  Check it please http://aps2.toshiba-tro.de/kb0/HTD0302U00000R01.htm, identify the unknown device and try to find the download on Toshiba download page http://www.toshiba.eu/innovation/download_drivers_bios.jsp
  Here you can find all the drivers for your laptop model.

  I checked the drivers for the model of your laptop and all of them are listed for Win8 64bits. You have installed all the?

• Equium M50-192: where to find a driver for DVD/CD player

  Hi, can someone please tell me the site for the latest driver for my CD/DVD drive because none is listed in the driver update page, thank you.

  AFAIK, the Toshiba driver page, that you will not find the special CD/DVD drive drivers. The laptop uses a simple common Microsoft Windows driver
  That's why it of not necessary to install the 3 drivers

• where I Reinstall driver HL-DT-ST DVDRAM GSA-4120 b

  I uninstalled my driver but have no idea where to access a relocation-ideas?

  Hi tammysummers,

  Engraver of DVD LG HL-DT-ST DVDRAM GSA-4120 b you use?

  If you use an engraver of DVD LG HL-DT-ST DVDRAM GSA-4120 b, you can follow one of these steps.

  (a) If you received a CD of software from the manufacturer, you try to install the driver software from the CD.

  (b) you can also contact the manufacturer of the DVD burner drive for assistance.

  http://www.LG.com/global/support/index.jsp

  Hope the helps of information.

  Please post back and we do know.