Similar Questions

• Accurate cycle of FPGA simulation error

  Hello.

  I have problems simulating an FPGA vi with a third party Simulator.

  I took the example of the tutorial found at http://zone.ni.com/devzone/cda/tut/p/id/12942 , but I get the error of dialogue (see attachment) during the construction of the export of the simulation.

  I put in the LabVIEW options the Simulator to ISim.

  The text in the details section of the dialog error box is:

  Error-61499 occurred at niFpgaSimulate_GenerateCompileOrder.vi<><><>

  Possible reasons:

  LabVIEW FPGA: An internal software error in the LabVIEW FPGA Module has occurred.  Please contact National Instruments technical support on ni.com/support.

  There was an error in the compile command generation. The file that caused the problem is... / niFpga /... / niFpga/PkgNiFpgaSimulationModel.vhd. For more information, see compileOrder.log in the directory of niFpga simulation. The error information is less to:

  Line 53: Syntax error near ', '.
  ERROR: HDLCompiler:854 - "... / niFpga /... / niFpga/PkgNiFpgaSimulationModel.vhd" line 13: Unit ignored due to previous errors.
  ERROR: HDLCompiler:688 - "... / niFpga /... / niFpga/PkgNiFpgaSimulationModel.vhd" line 65: pkgnifpgasimulationmodel statement Package is not yet compiled
  ERROR: HDLCompiler:69 - "... / niFpga /... / niFpga/PkgNiFpgaSimulationModel.vhd" line 73: is not declared.
  ERROR: HDLCompiler:69 - "... / niFpga /... / niFpga/PkgNiFpgaSimulationModel.vhd" line 79: is not declared.
  ERROR: HDLCompiler:69 - "... / niFpga /... / niFpga/PkgNiFpgaSimulationModel.vhd" line 81: is not declared.
  ERROR: HDLCompiler:69 - "... / niFpga /... / niFpga/PkgNiFpgaSimulationModel.vhd" line 77: is not declared.
  ERROR: HDLCompiler:69 - "... / niFpga /... / niFpga/PkgNiFpgaSimulationModel.vhd" line 89: is not declared.
  ERROR: HDLCompiler:69 - "... / niFpga /... / niFpga/PkgNiFpgaSimulationModel.vhd" line 90: is not declared.
  ERROR: HDLCompiler:69 - "... / niFpga /... / niFpga/PkgNiFpgaSimulationModel.vhd" line 95: is not declared.
  ERROR: HDLCompiler:617 - "... / niFpga /... / niFpga/PkgNiFpgaSimulationModel.vhd" line 95: nearby; prefix must designate a scalar or array type
  ERROR: HDLCompiler:69 - "... / niFpga /... / niFpga/PkgNiFpgaSimulationModel.vhd" line 98: is not declared.
  ERROR: HDLCompiler:69 - "... / niFpga /... / niFpga/PkgNiFpgaSimulationModel.vhd" line 100: is not declared.
  ERROR: HDLCompiler:69 - "... / niFpga /... / niFpga/PkgNiFpgaSimulationModel.vhd" line 102: is not declared.
  ERROR: HDLCompiler:69 - "... / niFpga /... / niFpga/PkgNiFpgaSimulationModel.vhd" line 104: is not declared.
  ERROR: HDLCompiler:69 - "... / niFpga /... / niFpga/PkgNiFpgaSimulationModel.vhd" line 97: is not declared.
  ERROR: HDLCompiler:69 - "... / niFpga /... / niFpga/PkgNiFpgaSimulationModel.vhd" line 107: is not declared.
  ERROR: HDLCompiler:69 - "... / niFpga /... / niFpga/PkgNiFpgaSimulationModel.vhd" line 110: is not declared.
  ERROR: HDLCompiler:69 - "... / niFpga /... / niFpga/PkgNiFpgaSimulationModel.vhd" line 113: is not declared.

  Using LabVIEW 2011 (Xilinx tools 12.4) on Windows 7 Pro 64 bit.

  Any help would be appreciated.

  Thank you.

  Hello

  It seems that there is an article in the knowledge base that describes the error you see.  Let me know if it solves your problem.

  Error-61499 took place at niFpgaSimulate_GenerateCompileOrder.vi

  See you soon,.

  Ryan

• Microsoft Train Simulator error Setup error "Unable to verify the media" keeps coming back.

  Original title: Microsoft Train Simulator Setup error

  Try to install Microsoft Train Simulator on vista and when installing on the error 'Failed to check media' 2nd drive keeps coming back. Have also tried on another computer that has XP and the same results. Can anyone help?

  Hi Rick,

  Given that the CD does not work in Windows XP computer also, there seems to be a problem with the drive itself.

  Clean the CD or the DVD. To do this, use a disc cleaning kit. Or gently wipe the silver part of the disc with a soft and Lint cotton cloth.

  You can read the following article and check.

  Error message or the game stops responding on the "Loading" screen when you start a Microsoft game: "insert the right CD.

  If you are always faced with the question, so you may need to replace the drive.

• JDE Simulator error "reload software: 552".

  Hi, I use Blackberry JDE version 4.7 with Simulator 4.6.0.150 bold 9000. Everything works fine an hour ago.

  It just started to show "reload software: 552" all of a sudden. He have no importance how to start the simulater, JDE debuger, or simply run the Simulator booth along.

  There is a solution to a real device for this error message, but what it means for a Simulator?

  Thanks for your help.

  Chimera

  If you run your 4.7 on a "BOLD" device software, you run the risk of "bricking" of the device, then do not.

  The JDE 4.7 has only a simulator of the storm, because the storm is the only device which manages 4.7 OS.

  If you want to target the "BOLD", then use the 4.6 JDE or more LOW (no more).

• Temporary server on BBM on the Simulator error

  Hi, I want to test some features BBM on Simulator as "Invited PIN" and "invited to download", my problem is when I open the app the sumulator BBM I get "Unable to complete installation", "temporary server error" and only the button exit

  Notes:

  1. I did all the steps in the README.txt that is on BBM dirctory, but the problem persists

  2. when I open the Simulator BBM I get these BBM Server console output

  <2013-03-19 14:14:37.194 GMT+02:00>:[97]:::
  <2013-03-19 14:14:37.194 GMT+02:00>:[96]:::
  <2013-03-19 14:14:37.194 GMT+02:00>:[98]:::
  <2013-03-19 14:14:37.204 GMT+02:00>:[99]:::
  <2013-03-19 14:14:37.392 GMT+02:00>:[101]:::
  <2013-03-19 14:14:37.392 GMT+02:00>:[100]:::
  <2013-03-19 14:14:37.392 GMT+02:00>:[102]:::
  <2013-03-19 14:14:37.405 GMT+02:00>:[103]:::
  <2013-03-19 14:14:37.425 GMT+02:00>:[104]:::
  <2013-03-19 14:14:37.425 GMT+02:00>:[105]:::
  <2013-03-19 14:14:37.427 GMT+02:00>:[106]:::
  <2013-03-19 14:14:37.429 GMT+02:00>:[107]:::
  <2013-03-19 14:14:37.430 GMT+02:00>:[108]:::
  <2013-03-19 14:14:37.433 GMT+02:00>:[109]:::
  <2013-03-19 14:14:37.435 GMT+02:00>:[110]:::
  <2013-03-19 14:14:37.546 GMT+02:00>:[111]:::
  

  Please help me

  Thank you very much

  It seems that you have the Java Cryptography Extension incorrect files.  Note that the PVE files are different for Java 6 and 7.  Make sure that you have copied the correct files for your current location of Java.

• App does not start on the Simulator, error: (this file could not be opened. Make sure you have the proper permissions and try again).

  I get an error when I try to run my application after packaging and loading on the Playbook Simulator.

  When I try to start my application, I get a white screen for 1 second, it flashes black for a second before leaving white and then I get this error message: "this file could not be opened. Make sure you have the proper permissions and try again. »

  

  I have in my source folder:

  config. XML

  Icon.PNG

  Index.html

  Load.js

  Progress.CSS

  I don't think that my code using anything that requires permissions. (that is to say, does not use the shared files, or camera, etc.)  At the moment it is simply a text box and a button that calls code that retrieves data from the database I have. API reference, he said that I don't need permission for the use of the HTML5 and sql database.

  This is my config file:

  
  http://www.w3.org/ns/widgets"
          xmlns:rim="http://www.blackberry.com/ns/widgets"
          version="1.0.0.0">
  
    Test
  
    
      A simple test app.
    
  
  My Name
  
    
  
  access_shared
  
  
    
    
  
  
  

  I don't have any uses which I put in the "access_shared" to test, but it did not help.

  My app works very well in the Opera browser, and also in the training Simulator, I don't understand why it does not work on the playbook Simulator.

  I read something on the extension of the Javascript and exporting to a JAR file. Do I need to do? I have only a single .js file with a few defined variables and functions that implement the functionality of database/sql.

  I can't think of anything...

  Make sure that the index.html file referenced in your config.xml file has exactly the same name as the index.html file in your application.  You list all of your files with the 'I' for 'Index.xml' in capital letters.  The Tablet OS applies a case-sensitive file system.

  If this is the case, I suggest rename Index.html index.html, reconditioning and try again.

• Network in the blackberry playbook Simulator error

  Hello

  I installed all the tools of development needed for the Blackberry playbook.

  I use Adobe Flash Builder 4 to develop applications.

  I installed playbook Simulator version 0.9.3 in Vmware player 3.1.2

  The browser in the Simulator can't load pages. Every time I try, I get a message

  Error:

  A network error has occurred

  Please try again later.

  I updated the network settings on the card in the reader of the VM NAT.

  Should I do all the network settings to browse web pages?

  Looking forward for your help.

  You are on a virtual private network? If so make sure you get off it.

  Are you on Windows or Mac?

  You can try instead of NAT network bridge and see if VMWare gets you an IP as your host computer, which should have access to the internet.

• Simulator error - fledge.exe

  Hello

  I'm stuck with the Simulator.

  It was OK up until an hour ago. But suddenly after that I closed the Simulator and restart the computer, I can't bring Simulator.

  The error message is:

  "The application could not initialize properly (0 x 0000005). Click Ok to close the application. »

  I removed the JDE and Simulator and re-installed several times but same thing happens again.

  Is it because of my environment?

  Thank you

  DK

  Happens to me on the opportunity, however it does not persist, there will be one to three times and then the Simulator works perfectly again for awhile.

  I know that sometimes it seems that your compensation Simulator dump files (manually or via the JDE) can have a positive influence on that.

  Good luck.

• When you enter the product key for the Microsoft Flight Simulator error message ' year error occurred. "

  Original title: flight simulator X Re

  When I type in the product key of that error message.

  on the internet, he said that you would be able to send me a new product key. You would do this please?

  Thank you

  Davy

  Hi Ryan,

  Have you tried the steps I suggested on the previous post, otherwise please try these steps and check if that helps.

  If the problem persists, I suggest you to contact the Support of Flight Simulator for better assistance.

  http://www.Microsoft.com/products/games/FSInsider/tips/pages/default.aspx

  http://www.Microsoft.com/products/games/FSInsider/community/pages/default.aspx

  Hope this information helps. If you need more assistance or information on this question, reply to this post. I'll be happy to help you.

• Captivate - create software Simulation - error

  Hello

  I recently downloaded the 64 bit version of this software and the program to make my first simulation software.

  I received the following error message:

  

  I went to the file, such as requested and I got an access denied when I tried to save it.

  Am using win 10 on a Surface of book and screen resolution is 2000 x 3000.

  Am an administrator on my computer, please advise how to solve this problem.

  Thank you!

  Look in the folder Program Files > Adobe > Adobe Captivate directory and you should find a text file called AdobeCaptivate.ini

  In this file, there is a parameter, you must change as indicated by the error message.  This setting allows to Captivate work with the screen high resolution.

  You can see that in order to change the setting, you need to first save a copy of the file on your desktop (or another folder outside of Program Files) and then make the change, save the file, and then copy the file in the Captivate installation directory to overwrite the original file.

• Led Simulation error

  I had problems with a more complex circuit that I played with, and I've narrowed the problem down to handling of Multisim diodes during the simulation.

  The circuit below shows two branches that have identical resistances but there is a diode in series with it if she performs only other each half cycle. It is a rectifier and theory tells us to wait for the RMS current through resistance to 70.7% of the current flowing through a resistance that does not have the diode in series (for an ideal diode). For R2 below I (R2) = 12/2.88 = 4 .16A and this is properly determined by XMM2 multimeter. The current in the branch of the diode must be 4.16 * 0.707 = 2.94 A but as you can see XMM1 multimeter is far away. I changed the led a virtual model and the current has dropped to 2.14 A...

  

  I checked this with the same values of resistance and the diode model using LTSpice and I get the correct results with this program (which allows Fior diode charactersists)...

  

  I have attached two files (Multisim 14 and LTSpice) simulaiton for reference.

  So what is happening here?

  Hi Myamigo

  Thanks for that information, I think that the issue here is with the multimeter and not with the circuit. I used a current probe and got A 2.8 on this line. I enclose a picture showing this.

  I think that this may be due to a configuration on this unit or it can also be a CAR, but I need to conduct additional research on this to see if it is a wrongful conduct of Multisim multimeter.

• When I tried to run my Application with "Launch Android BlackBerry" on Bb 10.2 Simulator error: ERROR: code net.rim.ajde = 4 connecting 192.168.48.130 to BAD failed! NULL children = [status ERROR: code = 0 net.rim.ajde]

  ERROR: code net.rim.ajde = 4 connecting 192.168.48.130 to BAD failed! NULL children = [Status ERROR: net.rim.ajde]

   

   

  code 0 = Please check if the Android player was totally started when you got this error. Otherwise, you can either

   

  increase the time-out of the launch of reader Android on BlackBerry-> BlackBerry Android Development Tools

   

  page preferably or wait until the Android player is completely started and try again. NULL.]

   

   

  Please guide me how to solve this question where can I find

   

  BlackBerry-BlackBerry Android Development Tools >

  Please guide me with the Exact path

  Thank you

  OK, I have one installed and installed a new freshly.

  Solved my problem. Please answer my query to the other

  on the loading BAR file on BlackBerry Q5 Please.

  http://supportforums.BlackBerry.com/T5/Android-runtime-development/how-to-load-a-signed-bar-on-the-R...

• BB 9800 Simulator error

  Been getting this error when I try to start my trainer, I tried to launch the clear.bat file, but nothing happened. Any help will be greatly appreciated.

  Maybe reinstall?

• Download Simulator - error "The Archive is corrupted"

  Hello

  When I try to open the Simulator-

  BlackBerry_Simulators_6.0.0.246_9800.exe

  I get the errorArchive is corrupte

  Has anyone successfully installed this Simulator?

  Thank you

  I just re-uploaded, and it worked fine.

• incorrect-by-side configuration with Microsoft Flight Simulator error

  Original title: Microsoft Flight Simulator x: Acceleration

  HelloW,

  I bought the flight simulator 2004 and the expansion pack X accelaration,
  I loaded the Basic program that works correctly,
  but as I tried to load the extension I got a message of refusal to start,
  because it is a "side-by-side misconfiguration.»
  I am asked to see the application event log or use the command-line sxstrace.exe tool
  but I'm afraid I'm not able to understand these guidelines.
  I have windows 8. Y at - it a mismatch?
  Will you please help me solve this problem?
  George

  Glad to know that the question has been sorted.

  On the activation message that is receiving messages, please visit this link.

  http://support.Microsoft.com/kb/925723

  You can contact the support of Flight Simulator and check if there is a solution for this problem.

  Let us know if it helps.