Simultaneous inputs from different sources

Similar Questions

• How can I use notifications to send data from different sources for the same chart?

  Hello

  I use the model of 'Continuous measurement and logging' project comes with LV 2013.

  It is extremenly helpful in understanding the messaging between the acquisition, graphic and loops of newspaper. (Thank you NEITHER!)

  I ran into a snag though.

  I want to change so that my graphic loop receives notifications of data from two sources of acquisition by the declarant.

  I have trouble getting the data from the two sources to display on one graph.

  I've isolated the problem in the attached vi.

  Here's what happens:

  1. I create 2 parallel loops data and send the data to a third parallel loop with the notifiers.

  2. the third loop receives data from one of the loops because one of the authors of just receiving notifications is to expire instead of receive data.

  Can anyone suggest how can I fix?

  Thank you.

  -Matt

  Here's my modification of your VI. I put notes on the block diagram to explain the changes. He uses a queue for data transfer to avoid data loss. It uses a notifier to stop loops. All local variables and value property nodes have been eliminated.

  The way loops are arrested probably let some data in the queue. No more of one or two iterations of each of the loops of data acquisition. If you need ensure that all data has been displayed (or recorded in a real application), then you must stop acquiring loop first and read the queue until you know it's empty and both other loops stopped. Then stop the render loop and release the queue and the notifier.

  Lynn

• Dimension & fact from different Sources

  Hi all

  
  I was following the situation.
  (1) I have dimension of source who sits in EDW
  (2) my requirement is to create in time real made leave OLTP source B and create a report on DimA and FactB. To do this, I created a display in RPD and created FactB on it. On his own college B works very well with the fictitious dimension.
  (3) I'm fighting to join Dimension A(source A) with B (source B) done. There are the ID running between the two, but I do not know how to establish the relationship.

  
  Here's what I did and failed so far
  (a) join created between B done with Dimension A in the diagram of business model. "It did not work and gave me an error" [nQSError: 14025] indeed no table exists at the level of detail required.
  (b) in the fragmented content of the fact table, I gave this instruction to join FactB. ID = DimA.ID.It didn't work and I got following error ' none of the sources done B are compatible with the retail [] filter. " (HY000) »
  (c) together two steps above i.e. joined the FactB with DimA diagram of business model and content fragmented facts table this instructed to join FactB. ID = DimA.ID. Had the same error above b.
  (d) every time that I made levels are configured correctly.
  (e) I can not add logical dimension source Table because there is no physical relationship between two tables
  (f) also tried several logical Table Source but don't know how/where to join two tables.

  It seems that mine is not the case of the Federation of the horizontal, correct me if I'm wrong. Could someone suggest how to model this case in the DR.

  Sorry for the long post and thank you in advance for your valuable opnion.

  Thanks Christian. Email from Jeff helped me solve the problem. I assumed (not practical enough) that I can not create a physical link between the tables in two databases. OBIEE actually allows you to do. This solved my problem and everything works fine now.

  So the solution above the problem is "OBIEE allows you to create a physical link between two tables of different databses.

  Thanks again for your help.

• Data changed from different sources

  I have a problem with obtaining data in an AB ML1200 PLC. I'm simplifying this to explain: I have given in reg N7:0 which is the result of a calculation. Lets say

  "N7:0 = TextEntry1.value * 10. All right, but there is an another local HMI, who wrote also in N7:0. Although the value of this local HMI N7:0 illustrates the variation reflected the Calc above the Belvedere, any attempt to change the value N7:0 of the local GUI is substituted by the Calc. I need to be able to change the value of the local HMI and update the "TextEntry1.value" to reflect the change has Lookout. It sounds simple enough, but it is Kickin ' my ass! As a sidenote I would not have this problem if the AB driver on the lookout for the sustained MicroLogix float regs (F) - I was little shocked, that he did not. Any ideas?

  Looks like you need the connection on the remote source. For example, to create a pot. On the properties page, change its source away to the N7:0. It will also be well read and write the connection.

  But you also have to mutiply the value by 10, so you can first create an Alias on N7:0 by right-clicking the driver object and select Edit Configuration data members. Entry of scale, for example, the gross value of 0 to 100 and eng value between 0 and 10, so that this Alias will represent the value of N7:0 / 10. Give a name to this Alias. And then bind source away from the pot to this Alias. Have a try.

• iMovie 10 - how to merge the events from different sources?

  I libraries iMovie on 2 hard drives and in iMovie on two iMacs files both running iMovie 10.1.1

  How can I copy all my events on a single hard drive but leave the events and projects on both iMacs?

  The projects will move at the same time or how can I move them as well?

  Thanks for any help possible!

  You can copy events from one library to another of in iMovie.  See:

  http://help.Apple.com/iMovie/Mac/10.1/#/mov3fa25bae7

  For more details.

  Geoff.

• Several aggregates County from different sources group by year

  I have a total of 4 tables and dealing with frequent travelers. My goal is to find the number of frequent travelers in a period of time dating from 1990 to this day.
  
  I need to create a report where I list the number of frequent travellers according to when they enrolled, have investigated and took their flights. Test data are only a small sample of data. Also, some frequent travelers can have registered and taken a poll but never flown as Freq Flyer 1004 and some customers could have registered but never took the survey as Freq Flyer No. 1010. The report must be per year (1990 - Sysdate).
  

  Year       Enrolled       Took Survey       Flights Flown
  =========================================================
  1990             99                99                  99
  1991             99                99                  99 
  1992             99                99                  99
  ...
  2010             99                99                  99
  2011             99                99                  99
  2012             99                99                  99

  Scripts for Tables and Inserts:
  
  #1: Frequent Flyer Master table

    CREATE TABLE FREQ_FLYER
     (     "FREQ_FLYER_NO" VARCHAR2(4 BYTE), 
       "FREQ_FLYER_LAST_NAME" VARCHAR2(30 BYTE), 
       "FREQ_FLYER_FIRST_NAME" VARCHAR2(30 BYTE)
     );
  REM INSERTING into FREQ_FLYER
  SET DEFINE OFF;
  Insert into FREQ_FLYER (FREQ_FLYER_NO,FREQ_FLYER_LAST_NAME,FREQ_FLYER_FIRST_NAME) values ('1001','Taylor','David');
  Insert into FREQ_FLYER (FREQ_FLYER_NO,FREQ_FLYER_LAST_NAME,FREQ_FLYER_FIRST_NAME) values ('1002','Green','Robert');
  Insert into FREQ_FLYER (FREQ_FLYER_NO,FREQ_FLYER_LAST_NAME,FREQ_FLYER_FIRST_NAME) values ('1003','McWilliams','Cynthia');
  Insert into FREQ_FLYER (FREQ_FLYER_NO,FREQ_FLYER_LAST_NAME,FREQ_FLYER_FIRST_NAME) values ('1004','Poppins','Mary');
  Insert into FREQ_FLYER (FREQ_FLYER_NO,FREQ_FLYER_LAST_NAME,FREQ_FLYER_FIRST_NAME) values ('1005','Longnose','Pinochio');
  Insert into FREQ_FLYER (FREQ_FLYER_NO,FREQ_FLYER_LAST_NAME,FREQ_FLYER_FIRST_NAME) values ('1006','Brown','Edward');
  Insert into FREQ_FLYER (FREQ_FLYER_NO,FREQ_FLYER_LAST_NAME,FREQ_FLYER_FIRST_NAME) values ('1007','Menace','Dennis');
  Insert into FREQ_FLYER (FREQ_FLYER_NO,FREQ_FLYER_LAST_NAME,FREQ_FLYER_FIRST_NAME) values ('1008','Black','Monica');
  Insert into FREQ_FLYER (FREQ_FLYER_NO,FREQ_FLYER_LAST_NAME,FREQ_FLYER_FIRST_NAME) values ('1009','Dombrowski','Tom');
  Insert into FREQ_FLYER (FREQ_FLYER_NO,FREQ_FLYER_LAST_NAME,FREQ_FLYER_FIRST_NAME) values ('1010','Brown','Craig');
  Insert into FREQ_FLYER (FREQ_FLYER_NO,FREQ_FLYER_LAST_NAME,FREQ_FLYER_FIRST_NAME) values ('1011','Hernandez','Elsa');
  Insert into FREQ_FLYER (FREQ_FLYER_NO,FREQ_FLYER_LAST_NAME,FREQ_FLYER_FIRST_NAME) values ('1012','Williams','Brian');
  --------------------------------------------------------
  --  Constraints for Table FREQ_FLYER
  --------------------------------------------------------
  
    ALTER TABLE FREQ_FLYER MODIFY ("FREQ_FLYER_NO" NOT NULL ENABLE);

  Table # 2: registration

    CREATE TABLE FREQ_FLYER_ENROLLMENT
     (     "FREQ_FLYER_NO" VARCHAR2(4 BYTE), 
       "START_DATE" DATE, 
       "END_DATE" DATE
     );
  REM INSERTING into FREQ_FLYER_ENROLLMENT
  SET DEFINE OFF;
  Insert into FREQ_FLYER_ENROLLMENT (FREQ_FLYER_NO,START_DATE,END_DATE) values ('1001',to_date('12-JAN-90','DD-MON-RR'),null);
  Insert into FREQ_FLYER_ENROLLMENT (FREQ_FLYER_NO,START_DATE,END_DATE) values ('1002',to_date('17-JAN-90','DD-MON-RR'),null);
  Insert into FREQ_FLYER_ENROLLMENT (FREQ_FLYER_NO,START_DATE,END_DATE) values ('1003',to_date('31-DEC-95','DD-MON-RR'),null);
  Insert into FREQ_FLYER_ENROLLMENT (FREQ_FLYER_NO,START_DATE,END_DATE) values ('1004',to_date('30-DEC-95','DD-MON-RR'),null);
  Insert into FREQ_FLYER_ENROLLMENT (FREQ_FLYER_NO,START_DATE,END_DATE) values ('1005',to_date('01-JAN-00','DD-MON-RR'),null);
  Insert into FREQ_FLYER_ENROLLMENT (FREQ_FLYER_NO,START_DATE,END_DATE) values ('1006',to_date('02-JAN-00','DD-MON-RR'),null);
  Insert into FREQ_FLYER_ENROLLMENT (FREQ_FLYER_NO,START_DATE,END_DATE) values ('1007',to_date('31-JAN-00','DD-MON-RR'),null);
  Insert into FREQ_FLYER_ENROLLMENT (FREQ_FLYER_NO,START_DATE,END_DATE) values ('1008',to_date('30-OCT-11','DD-MON-RR'),null);
  Insert into FREQ_FLYER_ENROLLMENT (FREQ_FLYER_NO,START_DATE,END_DATE) values ('1009',to_date('01-MAR-12','DD-MON-RR'),null);
  Insert into FREQ_FLYER_ENROLLMENT (FREQ_FLYER_NO,START_DATE,END_DATE) values ('1010',to_date('31-MAR-12','DD-MON-RR'),null);
  
  --------------------------------------------------------
  --  Constraints for Table FREQ_FLYER_ENROLLMENT
  --------------------------------------------------------
    ALTER TABLE FREQ_FLYER_ENROLLMENT MODIFY ("FREQ_FLYER_NO" NOT NULL ENABLE);
    ALTER TABLE FREQ_FLYER_ENROLLMENT MODIFY ("START_DATE" NOT NULL ENABLE);

  Table #3: survey

    CREATE TABLE FREQ_FLYER_SURVEY
     (     "FREQ_FLYER_NO" VARCHAR2(4 BYTE), 
       "SURVEY_DATE" DATE
     );
  
  SET DEFINE OFF;
  Insert into FREQ_FLYER_SURVEY (FREQ_FLYER_NO,SURVEY_DATE) values ('1001',to_date('01-JAN-91','DD-MON-RR'));
  Insert into FREQ_FLYER_SURVEY (FREQ_FLYER_NO,SURVEY_DATE) values ('1002',to_date('01-FEB-91','DD-MON-RR'));
  Insert into FREQ_FLYER_SURVEY (FREQ_FLYER_NO,SURVEY_DATE) values ('1003',to_date('01-JAN-96','DD-MON-RR'));
  Insert into FREQ_FLYER_SURVEY (FREQ_FLYER_NO,SURVEY_DATE) values ('1003',to_date('01-JAN-97','DD-MON-RR'));
  Insert into FREQ_FLYER_SURVEY (FREQ_FLYER_NO,SURVEY_DATE) values ('1003',to_date('01-JAN-98','DD-MON-RR'));
  Insert into FREQ_FLYER_SURVEY (FREQ_FLYER_NO,SURVEY_DATE) values ('1004',to_date('31-DEC-95','DD-MON-RR'));
  Insert into FREQ_FLYER_SURVEY (FREQ_FLYER_NO,SURVEY_DATE) values ('1004',to_date('12-FEB-11','DD-MON-RR'));
  Insert into FREQ_FLYER_SURVEY (FREQ_FLYER_NO,SURVEY_DATE) values ('1005',to_date('12-MAR-11','DD-MON-RR'));
  Insert into FREQ_FLYER_SURVEY (FREQ_FLYER_NO,SURVEY_DATE) values ('1005',to_date('12-APR-12','DD-MON-RR'));
  Insert into FREQ_FLYER_SURVEY (FREQ_FLYER_NO,SURVEY_DATE) values ('1006',to_date('10-APR-10','DD-MON-RR'));
  Insert into FREQ_FLYER_SURVEY (FREQ_FLYER_NO,SURVEY_DATE) values ('1007',to_date('10-APR-10','DD-MON-RR'));
  Insert into FREQ_FLYER_SURVEY (FREQ_FLYER_NO,SURVEY_DATE) values ('1008',to_date('31-JUL-12','DD-MON-RR'));
  Insert into FREQ_FLYER_SURVEY (FREQ_FLYER_NO,SURVEY_DATE) values ('1009',to_date('31-JUL-12','DD-MON-RR'));
  Insert into FREQ_FLYER_SURVEY (FREQ_FLYER_NO,SURVEY_DATE) values ('1009',to_date('02-AUG-12','DD-MON-RR'));
  --------------------------------------------------------
  --  Constraints for Table FREQ_FLYER_SURVEY
  --------------------------------------------------------
  
    ALTER TABLE FREQ_FLYER_SURVEY MODIFY ("FREQ_FLYER_NO" NOT NULL ENABLE);

  Table # 4: flights

    CREATE TABLE FREQ_FLYER_FLIGHTS
     (     "FREQ_FLYER_NO" VARCHAR2(4 BYTE), 
       "FLT_NO" VARCHAR2(4 BYTE), 
       "FLT_DATE" DATE
     );
  REM INSERTING into FREQ_FLYER_FLIGHTS
  SET DEFINE OFF;
  Insert into FREQ_FLYER_FLIGHTS (FREQ_FLYER_NO,FLT_NO,FLT_DATE) values ('1001','1234',to_date('01-JAN-00','DD-MON-RR'));
  Insert into FREQ_FLYER_FLIGHTS (FREQ_FLYER_NO,FLT_NO,FLT_DATE) values ('1001','1234',to_date('01-JAN-12','DD-MON-RR'));
  Insert into FREQ_FLYER_FLIGHTS (FREQ_FLYER_NO,FLT_NO,FLT_DATE) values ('1001','2345',to_date('01-AUG-12','DD-MON-RR'));
  Insert into FREQ_FLYER_FLIGHTS (FREQ_FLYER_NO,FLT_NO,FLT_DATE) values ('1002','1234',to_date('01-FEB-95','DD-MON-RR'));
  Insert into FREQ_FLYER_FLIGHTS (FREQ_FLYER_NO,FLT_NO,FLT_DATE) values ('1002','2345',to_date('01-AUG-12','DD-MON-RR'));
  Insert into FREQ_FLYER_FLIGHTS (FREQ_FLYER_NO,FLT_NO,FLT_DATE) values ('1002','2346',to_date('04-AUG-12','DD-MON-RR'));
  Insert into FREQ_FLYER_FLIGHTS (FREQ_FLYER_NO,FLT_NO,FLT_DATE) values ('1003','1234',to_date('01-DEC-00','DD-MON-RR'));
  Insert into FREQ_FLYER_FLIGHTS (FREQ_FLYER_NO,FLT_NO,FLT_DATE) values ('1003','2346',to_date('01-JAN-01','DD-MON-RR'));
  Insert into FREQ_FLYER_FLIGHTS (FREQ_FLYER_NO,FLT_NO,FLT_DATE) values ('1010','1234',to_date('01-JUL-12','DD-MON-RR'));
  --------------------------------------------------------
  --  Constraints for Table FREQ_FLYER_FLIGHTS
  --------------------------------------------------------
  
    ALTER TABLE FREQ_FLYER_FLIGHTS MODIFY ("FREQ_FLYER_NO" NOT NULL ENABLE);
    ALTER TABLE FREQ_FLYER_FLIGHTS MODIFY ("FLT_NO" NOT NULL ENABLE);

  Your help or suggestions are welcome.
  
  Published by: Roxyrollers on August 7, 2012 17:39
  
  Published by: Roxyrollers on 8 August 2012 08:35

  Hello

  Roxyrollers wrote:
  ... How to combine years of declaration in a column? When I select only the year of declaration of table e, I see just of 1990, 1995, 2000, 2011 and 2012 as well as whites for others who are picked up s table

  If you want to e.reporting_year or s.reporting_year, that we're not NULL, no?

  SELECT  COALESCE ( e.reporting_year
              , s.reporting_year
              )               AS reporting_year ...
  

  If none of them is NULL, then it will return e.reporting_year, because it is listed first. In this issue, however, they will be always the same whenever the two are not NULL, because the join condition

  on     e.reporting_year = s.reporting_year
  

  whatever so that you put first in the list of arguments to COALESCE.

  Published by: Frank Kulash, August 8, 2012 13:16

  As always, if someone suggests to use something you don't know, look it up in the manual of approriate. It comes to SQL and PL/SQL forum, so usually the approriate manual is the manual of the SQL language, or PL/SQL manual. This problem involves no PL/SQL, so that it shrinks even more. It you are not familiar with COALESCE, and then look in the manual of the SQL language:
  http://docs.Oracle.com/CD/E11882_01/server.112/e26088/functions030.htm#sthref995
  You will see that it is similar to the NVL. Obviously, you are already familiar with NVL, but Jean and I suggested that you use COALESCE instead NVL. Could there be a reason?

• Easy way to synchronize the audio left and right, from different sources?

  I mainly filmed concerts of a single camera using a Sony Z1 - when they are available, I'll take a sound card feeds channel 1, and a live auditorium feed a microphone mono channel 2. Because of the distance of the scene (and light is faster than sound, etc.), the power of the sound card is synchronized with the video and power of the auditorium is between 1 and 3 frames behind. Is there an easy way for me to take the tray clips together and just move this auditorium feed back in sync with the video and sound card feed, raw clips?

  Previously, I did this by dropping the clips to the timeline, done to separate tracks, sliding manually sync on the auditorium that feed by the required number of frames and link everything back up again. Synchronize audio visually using the waveform display (before first CC).

  I have two problems with this in Adobe first CC. First, the audio waveforms are not like waveforms more (and it doesn't seem to be possible to change the display to the old way?). So now that I am syncing the auditorium that feed in sound only, because I don't see anything on the screen to sync any more - both channels just look like random noise (or almost).

  Secondly, I film some events of multi camera, and of course, I'd like to be able to use the new functionality of synchronization for the multicam. But I know in advance that the audio channels on all the clips are not synchronized with the video (the camera powered by the sound card will be synchronized, the camera takes live food out as indicated above). Surely, there must be a way where I can fix the sync audio to video on raw clips first, before you say Adobe to synchronize based on the audio clips? Otherwise it will all be misaligned and require adjustment of the manual sync anyway? Again, what I've done previously is set of benchmarks on the identical frames, multi camera sync (so the video is now just good) and then manually set the audio synchronization before editing.

  In the context menu for the timeline, you can uncheck rectified of Audio waveforms for their return to normal.  (I wish that Adobe does not have this as default.  It's just weird.)

  But to synchronize, you can only do in the order.

• L50-A-19N satellite can not read audio data from multiple sources

  I can't read the audio data from multiple sources. It is very annoying when I have 2 youtube videos, playing, if I start playing something on the media player, there is no sound on media player, it's the same when I have 2 open media players and 1 youtube video playing, youtube video has no sound...
  It disappears when I plug my headphones...

  I already have all the latest drivers, the DTS driver was last updated was in 2014, his day of February of this year...

  
  
  
  
  
  

  25/02/14

  His Studio in DTS

  DTS Inc.

  Windows 8.1 - 64 Bit

  1.01.2700

  I don't know if this has the feel, but I had his most recent DTS driver that I found, it is not my laptop model, but they all seem to be the same - v1.1.88.0
  I uninstalled the DTS software and still had the same problem, then it is irrelevant on its driver somehow...

  
  
  
  
  
  

  02/10/15

  Audio driver

  Integrated Device Technology Inc.

  Windows 8.1 - 64 Bit

  6.10.6491.0

  Audio driver IDT has more recent release date, but the version of the driver is the same as the 2013 one...
  Why the older drivers of toshiba releaseing as 'NEW '?
  

  2nd is my Advanced settings speakers, nothing has changed when I disabled "allow applications to take exclusive control of this device.
  

  Sorry but I don't understand your problem.
  I tested it on my machine and if I start the music on three different sources (YouTube, player, web radio) I can hear all together, but it makes no sense to listen to music from different sources.

  Or how do understand you?

• Clip of MultiCam, but with audio from SEVERAL sources at the same time?

  I recorded a seminar using several audio and video sources. Audio sources include a wire tie, room microphone and read directly from a computer.

  I got all the raw materials imported into FCPX and created a multicam clip, and everything is synchronized perfectly.

  For the video, I know how to make the cut between my different cameras.

  But for audio, I would be able to play several audio channels at once - namely, lapel mic and the mic to the audience. How can I do this?

  I know I could put the multicam audio clip: setback (for example) then also drag the microphone to the audience for the game. But that means every time I make an edit, I have to make it through two sources and must be absolutely sure that they fall never out of sync.

  I guess I could drag the multicam clip in the timeline twice (one above the other, so two are playing simultaneously), with a video source set to none. But the same problem - I always have to be very careful with the changes, two parallel versions never move out of sync.

  Is there a better way to do it?

  There are also sometimes I can do some automation of the volume of the different channels... so everything what you are proposing, please keep this in mind.

  Thank you!

  In fact with a multicam clip you need not "stuff" to work with multiple audio. It has excellent support directly in the application.

  See Steve Martin explain this: https://www.youtube.com/watch?v=HE4FRDMJBS0

• While on a page web, using one of several browsers, it will take off and scroll down without any input from me. Seems to be intermittent but annoying. All solutions?

  While on a page web, using one of several browsers, it will take off and scroll down without any input from me. Seems to be intermittent but annoying. All solutions?

  This could be a case of interference.   Read this document about it.   Think about the suggestion of new electonic or other nearby wireless devices.   I recently read the someone pen wacom being the culprit.

  Potential sources of interference Wi - Fi and Bluetooth - Apple Support

• Greek subtitles from any source for my Toshiba 32L 4333

  I thing I tried everything. Another encoding (utf8, ansi, unicode), different formats, different sources (usb, dlna) subtitles but it seems I can't do (Greek) subtitles are displayed.

  I can't understand what I'm doing wrong. Any suggestions?

  As much as I know, that subtitles don't are not supported via DLNA.

  But play video files from USB, it should be possible to activate the subtitles.
  Video files must be in the format of MKV file. Subtitles should be stored in the srt file in the movie folder. The srt file also supports the UTF-8 format.

  Select UTF-8 standard, text editor such as Notepad ++.
  Then, you choose the character set and I also choose the option convert to UTF - 8.

• I bought a new hard drive. I don't have a system recovery disk. Can I load Windows Vista from another source and activate using my original product key?

  I bought a new hard drive. I don't have a system recovery disk. Can I load Windows Vista from another source and activate using my original product key?

  Hello

  There is no download available from Microsoft Vista.

  Contact the manufacturer of your laptop and ask them to send a set of recovery disks.

  They should do this for a small fee.

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key determines which Edition is installed.

  Builders recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  See you soon.

  p.s. If the old hard drive is still installed and running before you change on hard drives and you never received the to purchase recovery discs, you can make the recovery discs from the recovery Partition which should be on the old hard drive. You will need to request that the manufacturer how to do as each computer manufacturer has their own way of making records of this partition recovery.

  It depends on the old hard drive still works.

• What happens if I am connected to the internet through two different sources or more?

  What happens if I am connected to the internet through two different sources or more?

  You get Internet from two sources. What did you expect to happen?

  This is not double the speed of anything...

• A target table is in charge of two different sources but the same columns, but a source is one database and another in a flat file.

  We all hope you are doing well.

  I have a business problem to implement in ODI 11 G. It's here. I'm trying to load a target table from two sources that have the same column names. But a source is to the file format and the other is in the Oracle database.

  That's what I think I'll create two mappings in the same interface by using the Union between the sources. But I don't know how the interface would connect to different logical architecture to connect to two different sources.

  Thank you

  SM

  You are on the right track, all in a single interface. Follow these steps

  (1) pull model of your data in the designer of the source file and your table model target to the target pane.

  (2) all relevant columns map

  (3) in the source designer to create a new dataset and choose as the UNION join type (this will create a separate tab in the source designer pane)

  (4) select the new dataset tab in the source designer pane and pull your source oracle table data model in the designer of the source. All columns that are relevant to the target card

  (5) make sure that your staging location is set to a relational technology i.e. in this case the target would be an ideal candidate because it is where the ODI will organize the data from source two files and oracle and perform the UNION before loading to the target

  If you want to watch some pretty screenshots showing the steps above, take a look at http://odiexperts.com/11g-oracle-data-integrator-part-611g-union-minus-intersect/

• How to pass Variables from the Source (SQL) to tab target (JavaBin Shell) in ODI knowledge Modules

  Hi all

  My name is Alessandro and I am new to the community.

  I have a problem with the KM stage custom when I try to pass the variable from the source to the target.

  The ODI version tha I use is the 11.1.1.5.0.

  I created a stage KM following the instructions of the metalink document (Doc ID 728636.1).

  But when I insert the value of the variable in a test table, the value in a table is the name of the variable.

  Where I'm wrong?

  I am doing thi.

  (1) create a step in my goal of shell sql source and javabin KM. In the source tab I get the value of a query, and the name "LAST_UPDATE" column.

  In the target tab, I attribute to the variabile jv_last_update the value of the variable #LAST_UPDATE, with the same name in the selection column.

  

  (2) I created a second stage where I insert into a table of the value of the variable jv_last_update (to debug the value of the variable):

  

  (3) when I try to see what I have in the table, the value of any line is the name of the variable "#LAST_UPDATE"; ".

  

  Thanks in advance

  
  Alessandro

  Hi Alessandro,.

  Interesting... I have not read the Oracle document you sent yet, but one thing I can guarantee you, is that it doesn't. If Oracle says that it should work, maybe it's a bug, or maybe he has changed on new versions of ODI. I am also on ODI 11.1.1.5 and I tried many different ways to pass SQL results to variables of java with all sorts of different labels, but none of them worked for me as well. But I managed to use it in a different way, so please see below if it matches your needs:

  We are just one step. The second is just to show that it worked:

  

  In the first step, on the source tab, select Oracle and point to the logical schema that you want to run the query:

  

  On the target, note the following Java BeanShell code with the SQL that you want to run:

  

  Now your variable must have the correct value of your SQL. To test it, I just write a comment 'Raise' to Jython in the second step:

  

  The result is 'X' as expected:

  

  It will be useful.

  Thank you!