Siri gives the wrong score for liverpool game

Similar Questions

• Does anyone has a software that can give the ip address for any device connected to the laptop, as the Council of access control?

  Hello team,

  Does anyone has a software that can give the ip address for any device connected to the laptop, as the Council of access control?

  Thanks for help

  LookAtLAN network monitoring is one of these tools.

  SuperScan is probably better, but I have not tried.

• When you try to activate Windows Vista with the key that came with it, I get an error that the key is of the wrong type for activation.

  activation code

  I had a hard drive crash and installed the new hard drive. Installed my copy of vista that came with computer and when I tried to activate the software with the code provided with this windows says it's the wrong activation for this software.

  1. start your own, new thread in the following Microsoft Genuine Advantage forum and repost your MGA journal, and a clear description of your problem:

  http://social.Microsoft.com/forums/en-us/genuinevista/threads>

  2 Troubleshooting specialist will analyze the data and recommend an appropriate solution.

  Please run the Microsoft Genuine Diagnostics Tool then copy and paste the results into an answer here for further analysis:

  http://go.Microsoft.com/fwlink/?LinkId=52012>

  3. try the listed here appropriate phone number: phone numbers Microsoft Activation centers worldwide:

  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx>

  UTC/GMT is 21:19 Saturday, may 12, 2012

• I signed up to send Adobe & track today and I used the wrong address for billing. How can I change the email address, or Adobe ID?

  I signed up to send Adobe & track today and I used the wrong address for billing. How can I change the email address, or Adobe ID?

  Welcome to Adobe Send & Track!  Here is a link to update your Adobe ID information: your Adobe ID account management

• How can Z10 blackBerry I delete the wrong email for Z10 auto-sauve?

  I've mistyped my email address in my Z10 when trying to send a picture to my computer at home.  Now, whenever I try to send me an email, it will be set to the wrong address, even if I type everything correctly.  The Z10 seems to have recorded and gives the priority of use.

  How to remove these incorrect addresses stored in memory?
  PS. I tried to put myself in the contacts, but he always took an old, bad.

  I discovered that by sending email to myself from my ad for me in contacts, it bypasses this system of auto-grab.  So, I just can't send e-mail program.

• How to find the product key for a game online on Steam?

  I'm playing a game that connects to live on steam. He asked my windows product key which I didn't, but I discovered how to get without going through it. I got about 5 + programs for giving me my product key number anyway. But I always get an error message. I checked it more than 10 times. Still does not work. Is it possible for a person to miscrosoft to give me or I can call and they can give me?

  Hello Elias1724,

  Steam ask the product key for the game and not your product key for the Windows operating system.

  Where did you buy the game to install it?
  You bought the game on Steam? If so, then they would need the product key.
  Have you received an email with a link to download the game?

  It is not your Windows product key.

  Sincerely,

  Marilyn

• iMac Mail.app - sent mail deposited in the wrong folder for sent mail

  Have 3 on my iMac 27 "ElCapitan 10.11.2 iMAP e-mail accounts.  All 3 accounts synchronize very well on my iPad and iPhone.

  The problem is in the folder of mail sent on my iMac.  My iMac Mail.app sent the file structure has a main folder "sent", followed by 3 separate sent under folders; 1 for each IMAP account.  Mail sent to accounts 2 and 3 go to the sup of respective sent mail folder, but 95% of mail sent on behalf of 1 goes to the main "sent" folder.  Only a small number of account 1 send mail goes to the record account 1 sent mail under

  Sounds like a simple solution, but I'm running out of ideas - HELP

  Maybe it's that you have more than one account of outgoing mail, and you send the wrong. From the Mail menu bar, you select

  ▹ mail preferences...

  The Mail preferences dialog opens. Select the composition workshop in the row of icons at the top. Since the menu option

  Send new messages to:

  choose

  Selected mailbox account

  Note that this setting may have no effect if you start a new message while a VIP or smart mailbox is selected in the list of the mailbox. Those are research, the mailboxes not real recorded.

  If the problem persists, select the accounts in the Preferences dialog box, and then select the account assigned in the list on the left.

  In the account information pane, select the server in the menu option

  Server outgoing (SMTP) mail

  If there is a single server in the menu, select

  Edit the list of SMTP server...

  and to add a new server with the correct settings. If you do not know how, try the search of e-mail settings.

• Uninstalling Silverlight gives "the installation source for this product is not available. Varify that the source exists and that you can access. »

  I can't remove Silverlight.

  I want to update to Silverlight. When I try to download, the download fails and I get a message to uninstall the old version.  When I try to do, I get a message that says "the installation source for this product is not available. Varify that the source exists and that you can access. »

  I have been in this situation and tried the solution here:

  "How to manually clean a broken Silverlight installation.

  Who has not completely worked for me, however, if I pulled upward from Regedit
  (Start-> Run-> 'Regedit')
  and searched the whole registry "Silverlight", deleting keys of parenthood which contain this string. (There was a large number of them).  When I did, I was finally able to reinstall Silverlight.

  Note that editing the registry is dangerous, so make sure that you first create a backup of the registry and know how to restore it in case things go very wrong.
  "How do back up and restore the registry in Windows XP"
    <>http://support.Microsoft.com/kb/322756 >

  HTH,
  JW

• menus looking for the wrong pace for files

  Many of the pages that are called (clicked on / quiver over) took the name of paragraph is replaced by the word 'templates '.
  What happens to all the pages that get copy corrections.
  I make my changes to the files sitting on my local machine.
  I save with 'Ctrl S.
  I select the file in the list of files that was always on display "local view" and then clicked on small and plug icon that makes the computer "connected to the remote host" I click the blue up arrow.
  
  IT WORKS FINE WHEN:
  We start at the home page. (www.SDFTI.com.)
  Then clicked on "About Us" in the menu bar. (This initial section index.html page was NOT modified)
  Then place the mouse on "Who we are" activate the menu drop down and then clicked on "about in San Diego."
  The "San Diego" page (sandiego.html) shows and looks very good. The lens being recalled when it works as this is correctly stated as www.sdfti.com/about/sandiego.html.
  "About San Diego" has changed this morning.
  I took care to change only the text alignment and the copy.
  
  HOWEVER, THE WEB SITE FAILS AFTER VISITING A PAGE MODIFIED IN A SECTION:
  Try to connect to ONE of the other pages available from ANY of the drop down menus in the "all SDFTI" section fails after visiting a modified page in this section.
  Running the mouse over these other selections from drop-down menus, in this condition, shows the target asking a html page, preceded by www.sdfti.com/template/ * .html.
  
  There is a big problem with the Student Services section.
  I modified the copy on the file index.html.
  
  The only links that work are those in the menu bar is a page set and point schedule link in the links of the left image.
  Links that fail are those in the menu drop down titled "links" and those of the image on the left labeled "enjoy San Diego" and "Weather links."
  
  
  What I've done wrong? How can I fix it? How do we prevent it?
  
  

  Please download the file template (*.dwt) on your website and after a
  link to me.

  The page you have linked below is not a page of the child of a model, I would
  need to see the model and a page of the child on which links are
  failure to get an idea of what might happen.

  --
  Murray - ICQ 71997575
  Adobe Community Expert
  (If you * MUST * write me, don't don't LAUGH when you do!)
  ==================
  http://www.dreamweavermx-templates.com - template Triage!
  http://www.projectseven.com/go - DW FAQs, tutorials & resources
  http://www.dwfaq.com - DW FAQs, tutorials & resources
  http://www.macromedia.com/support/search/ - Macromedia (MM) Technotes
  ==================

  "SD Dazed n Confused" wrote in message
  News:e8140r$5BL$1@forums. Macromedia.com...
  > Thank you Murray ("ACE") for the jump with little assistance.
  >
  > Designer created the site, we downloaded on my computer, he left for
  > Japan and said that I could copy the changes and then only highlight the
  > file and
  > click the blue up arrow to republish on the live server. When I did it.
  > to
  > the index file of two paragraphs, ('career' & 'non_career') that
  > problem
  > arisen. I, unfortunately, am a person of frontpage and do not know the
  > oddities
  > This program. (although I'm getting a sense for a big problem!)
  >
  > Models are all sitting together in their own subdirectory
  > Templates.
  > The .dwt files were not modified or loaded from my computer to the
  > live
  > server.
  > On the file index.html, for the career section, I have added two meta tags
  > (description and keyword) and changed the copy of body before reposting it.
  > ( http://www.sdfti.com/career/index.html)
  >
  >--> NOTE:
  > Immediately following is the html code for /career/index.html
  > After that will be the html code of /Templates/CareerStdents.dwt
  >
  > I TRIED TO POST THIS REPLY WITH CODE AND HE HAS NOT MANAGED TO SAVE 6
  > TIME
  >

• Adding column which gives the serial number for each line in the Bulletin Board

  I use the update version 2 Jdev 11 g.
  I'm the filling of all employees from the emp table ADF table.
  My requirement is to add a column more as the first column and header line which displays the serial number for each serial number of row.the is not available in the table emp in database .i want to generate it dynamically when the data are filled in to ADF table.i don't want not to use the method to get the SQL query rownum. I want to get custom code (in the Managed Bean) or set all of the properties in the subject entity or any other object.
  
  Published by: sj0609 on September 8, 2009 09:43

  Hello

  Give an id to the table (say 'currRow') varStatus property. Add a column to the table (for example with a text output), then set it to the value of the output text #{currRow.index}.

  Arun-

• IE me can connect to the website of the Daily Mail, but firefox can't, gives the wrong user name or password.

  Until a few days ago I could log on to the site daily mail with firefox or IE, now I can only connect with IE, firefox gives the username/password invalid message.

  This problem may be caused by corrupted cookies.

  • https://support.Mozilla.org/KB/cannot+log+in+to+websites

  Clear the cache and cookies from sites that cause problems.

  "Clear the Cache":

  • Tools > Options > advanced > network > storage (Cache) offline: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Tools > Options > privacy > Cookies: "show the Cookies".

• How to give the default value for an attribute in the OPA

  Hello
  
  I need a default attribute boolean to true at the beginning of the session of the OPA. I need to use it to control the visibility on some pages.
  
  Can someone please throw light on how to best implement this?
  
  Thank you.

  You have a few options (as always with the OPA!)

  If you use determinations of Web and that you have defined your own screens, then the easiest way is to define a default in the screen - you can either do a default static or dynamic based on an attribute is proved by a default rule.

  If you want a value by default when you debug without using screens, so you're better off just writing a rule to set the default value. It's kinda interesting with a Boolean value as you do not need to tell the value of the attribute OPA - it is inherent in the name of the attribute. For example, if you had a conclusion "control is visible" (with no = "true" or whatever it is) it would be set to 'control is visible' to 'true '. Set it to false, you simply need to type "control is not visible" - which actually (thanks to OPA assuming a 'subsidiary conclusion') defines "control is visible" to "false".

  You can then replace it in the debugger of via a screen issue (if you force the question).

  I don't know how it would work with server of determinations if you had a default value proved by a rule, but has also provided a value in the data - maybe someone else can clarify if the rule takes precedence over the input data? My usual approach is to try locally in OPM and see (using something like SOAPUI to integrate with the determinations OPA server web service). If that's the best way to implement this course (or indeed if using a default value of visibility control screen is best practice) is difficult for me to say - I am a relative beginner!

  Hope that helps a little...

• What is the wrong tool for the job?

  Hello-

  I am trying to create a slideshow pdf to show what look like screenshots of a web application.

  I'm confused how to handle page sizes, since, while a screenshot can indeed be comparable to a piece of paper landscape, a web page may have a more vertical portrait because of the scrolling.

  I realize all the portrait pages, say legal size?

  And use only the portion of the book I need?

  but who would look totally weird in my pdf presentation...

  OR... can I create individual Indesign Documents, setting the necessary size for the content.

  Convert to jpg, and then simply insert them as images in my slideshow?

  Sorry if I'm not clear

  appreciate any guidance

  Marion

  Be sure to save the file later.

  Bob

• DM4-1140SA (Windows 8 Pro - 32-bit) hardware upgrades - that will give the most bang for my buck

  Laptop specs: http://support.hp.com/us-en/document/c02550724

  Which would improve the more noticeable performance for example change the HARD disc of the SDS, the 3GB DDR3 8 GB RAM DDR RAM upgrade? Could you give an indication of how much improvement I could hope with each of the suggested upgrades? Also, could you give some suggestions of what specifications technical I should look for spare parts.

  In addition, suggestions of software to improve performance would be greatly appreciated?

  Thank you very much. Yan

  The Pro 840 is the one you want. You can't go wrong with a SATA III... even if the computer interface is SATA II, SATA III work as well as a SATA II will and will obviously better on a port SATA III. Here's the memory you want to... DDR3 SO - DIMM 1333 mhz PC3-10600 aka.

  http://www.crucial.com/store/listparts.aspx?model=Pavilion%20dm4-1140sa

  Here is the Manual:

  Link to the manual

  Page 44 shows replacement memory and Page 53 shows how to replace the hard drive.

  You have 2 slots available memory.

• choice of the wrong color for a selected link

  Why is the color of a link selected in the bookmarks so light? I'm having a very difficult time to locate the last bookmark link so that I can go to the following. How can I change this to something either darker and easier to see?

  That always looks like something that can be fixed by choosing another theme, so try to give him another chance with a few other Windows themes.

  • Firefox 3 theme for Firefox 4: https://addons.mozilla.org/firefox/addon/firefox-3-theme-for-firefox/