size of race?

Similar Questions

• Low & left slide during 0.5 px after change the size of race

  I try this in Illuatrator CC and Illustrator CS6 on Mac OS X Yosemite

  Steps to follow:

  1. Pen tool, make a square (x = 260.5)

  

  2. change the size of race

  

  3 X 260 px =!

  

  4. change the size of race to 1 px

  

  5 X 259,5 px =!

  

  6. where is the my problem? Preferences?

  

  Solve this problem

  Take off

  Align new objects to the pixel grid

  

• Cannot change the size of race under 1pt

  For the last two weeks with the new document I create, I can't do the size of race less 1pt. If I put in 0.5pt and press ENTER, the size of default race to 1 pt. This is true in the quick navigation bar both the appearance section. In older documents, I can change the size of race less 1pt. I downloaded the latest updates, which did not fix this problem. Is there something in the settings that control this?

  You are probably using the web profile for new documents, which must align with the grid of pixels by default. Yout want only power off, otherwise your fat Wight Stork should be a pixel tis number 1 or a multiple of.

  If you do not work on web documents, modify your new document profile.

  

  You can disable the feature here for the selected items.

  

• Change size redolog RAC.

  Hi all, I have a doubt:
  I have a three node RAC on Oracle 11.2.0.2 (with ASM)
  I found my bad redolog size (50M) to my real CARS (too swichts). So, I want to increase the size redolog.
  I tried to drop the 1 group and re-create it, but I can't because the Group 1 is used by the instance of number 1.
  So: How can I rebuild all my redolog to achieve the change in size?
  Is another way to do this?
  I can lead to a problebm if I have the first group of logfile with a volume (50M) and passion with a different size (say 300M)?
  
  Thanks in advance!

  You cannot delete a group of newspapers of an instance if its Active for her. What you need to do, if you want to remove the newspaper group, is to allow another thread for the same instance at least two groups contained in it and then drop the previous.

  Aman...

• How to change the size of race by default in CS5?

  I've read several things on this forum but nothing practical. In the past I have if I wasn't not possible to change the thickness of line with no document open and who has worked for all new documents to come. Well, this isn't.

  The size of default race is 1 point and I want it to change Te 0, 25pt. But how?

  Open the new Document profile that you use most often. Draw a line with the appearance that you want and use the Option (Alt) - drag to replace graphic Style by default (in the upper left in the graphic Styles Panel). Save the file.

• Incompatible font with a follow-up 3D camera size

  Hi all

  I have some mobile photos who need stocks on caterpillars. I opened my shot in AE went to Effects > 3D tracking camera > selected a trackpoint, click right and added my title and a camera. The first shot is superb! The title remains with the image and the character settings are just how I would like it.

  I go to my next shot to do exactly the same thing, I followed exactly the same procedure, but this time the police is a different size, even if the parameters of characters are the same. Even if these two fonts are 30px they show that radically different sizes. I can't get to eyeball the size and race for each shot, which is not ideal, since it is a professional job.

  I tried this with multiple injections and he continue to occur. Any suggestions?

  Thank you!

  I go to my next shot to do exactly the same thing, I followed exactly the same procedure, but this time the police is a different size, even if the parameters of characters are the same. Even if these two fonts are 30px they show that radically different sizes.

  Text in Ae have 3 parameters that control its apparent size on the screen (without taking into account the effects or text animators): the size of font in pixels which is a setting within the character Panel, scale and position Z in 3D.

  If your text is 30px you still 2 variables that can change. When you add your text to a target in the 3D camera Tracker, Ae does this to his account and creates this arrangement of z scale according to the size of the target you set in 3D Tracker and camera information. This makes it quite unpredictable as to what exactly the size or position in Z space/scale you're going to get finally = the appearance of your text on the screen is different from each shot. each track is different because each point tracking in 3D space is different and every camera movement is different - as you can see that there are many variables so you can not predict that the text will be the same size.

  You can somewhat control the relative size by increasing or decreasing the size of the target

  

  

  

  I can't get to eyeball of the right size and the race for each shot,

  no doubt. There are ways to make it easy on yourself - you can work with snapshots.

• Illustrator does not meet less than 1 point race...

  Illustrator does not properly respond to less than 1 pt stroke. It resets the race back to 1 pt, no matter what I do (Illustrator doesn't re-size to race when it is less than 1 point). What is going on? What can I do? Thank you!

  You have the game to match the pixel grid . You will need to select everything in your document, and uncheck the box. Then, in the drop-down menu, uncheck align new objects to the pixel grid.

• How can I do Brush tool remember settings for each new feature?

  Using

  Windows 7 x 64

  Illustrator CC 2014

  Finally, I'm trying to draw directly in Illustrator and I already want to shoot myself.

  How can I make the Brush tool don't forget profile and the size of the stroke?

  I need every line to be tapered at both ends and be of a certain size of race.

  

  But every race I do, I need to change that one way to be correct.

  What gives?

  In the flyout of the appearance Panel, deselect New Art has basic appearance. With this uncontrolled, a new object will be the same attributes as the drawn just before.

• colors changing when I copy in fireworks cs4 to illustrator cs4

  Hello

  Im having some problems with illustrator, the main problem is that when I move my logo in fireworks by copy - paste, the colors always change to a much darker green #6DAA25, to what it is in illustrator #8CC340. IM pretty new to illustrator, but my guess is, its something to do with Fireworks, not been able to read the file correctly.

  the second problem is that I want the majority of the image of this color #8cc63f, but any time I apply it to something as the text the number will increase to a different number after that I have applied, and then click other where. its not so much a problem as long as the color is slightly different, but I still not understand why illustrator cannot apply this color #8cc63f.

  the weird part is also a part of the text cannot be applied #8CC640 and continues to change to #8CC641, but can the rest of the text, which is separated. Again its not noticeable but boring, that the whole image can be incorrect.

  The last problem im having is that whenever I click on, for example, the Paintbrush and change the size of the stroke, the size of race will automatically change down to 1 pt, when I start using the brush.

  The main problem im having is the first, I can work around the other two, just thought to mention it, wrap it is maybe a bug or it being a popular problem.

  in any case if you can help me o would really appreciate it, thanks.

  What are the color settings and the document color space into Illustrator?

  Change your color space in artificial intelligence in RGB.

  Fie > Document Color Mode > RGB

• IF database-> RAC database: estimate of the size of the SGA for each instance

  Hello!

  Let's say that there is a single instance with SGA 100 G size DB (assume this size is optimal for this database).

  If this database is intended to be converted to a RAC database with 2 instances (suppose DB workload will be spread over multiple instances).

  How to estimate the needs of SGA size for each instance in the RAC database?

  It takes 50G + General cool CARS (say 15%) for each instance?

  (Do not consider situation when one of the instances has failed, and all the charge redirects to an instance having survived)

  I'd be grateful if someone has offered or provided useful references.

  ---

  Kind regards

  Kyrylo

  As a general rule, I would size the SGA on new nodes to 120% of the SGA to single instance. Yes, this means that you will more than double the size of the SGA. You will need additional space to hold the load memory Cache Fusion. And the buffer Cache are possibly a little more space to store additional versions of blocks that seem to accompany the many implementations of CARS. Now, it's just a rule of thumb, so it has a high degree to be very wrong.

  You'll want to consider two big things... (1) the service being used. Will you take advantage of the services to perform the partitioning application? If so, instances can see various workloads that can lead to requests for different resources. (2) you will support a kind of failover (TAF or manual failover) applications? If so, then the LMS must be sufficiently sized to support the additional workload.

  See you soon,.
  Brian

• Changes in weight of changing race composed form size?

  I wonder if there is a way to disable this feature because it affects my work horribly.

  When I work with a shape composed of sizing, changing the weight of the race is changing the size of the form.

  So I get the form to the size I want, I have to stop the run and then its size. But I need the size remains the same when I add the line. Another thing that's bothering me on this subject is that the bounding box selects out of the race. I have the alignment of the race to the Center. So far my only solution is to determine the race align setting inside. But I hope that there is a way to be able to follow the race to the default alignment to Center while being able to add STROKE without this resizing of my form. This was not a problem with basic shapes, only forms that are composed, and it is not a problem in CS6, CC only.

  Here is my form without running to the appropriate size.

  

  

  And now, here's that shape zoomed in map mode with a 1-point outline and size changes. You can also see that the selection of the bounding box is around the race instead of the form.

  

  

  Preferences > General > uncheck use a snippet of the limits

• Want to migrate the database (4node RAC) size of 4 TB of 10.2.0.5 at 11.2.0.4 on the new servers where the new type servers Primary (4 nodes) and Eve (4 nodes).

  Want to migrate the database (4node RAC) 4 TB size of 10.2.0.5(8 rompt = 4 prim/4 veille) to 11.2.0.4 on the new servers where the new type servers Primary (4 nodes) and Eve (4 nodes).  So with minimum downtime I have restore and recover again on 11.2.0.4 server must then clone that to create the day before.   Here, my question is can I take 0 backupp level before hand and restore on target (new) then primary at the time to leave the downtime take backup of level 1 of 10g and then retrieve it on 11g (new server) after successful recovery I'll perform clone to form eve of database on the new server. does this strategy work? If it works, can someone suggest me steps how can I need recover with backup after restoring the backup of level 0 on 11g. Like should I upgrade before you retrieve it with level 1 backup or I can update and then recover with the level 1 backup from the old server to the new server.

  Here is former servers of RHEL 5 version and new servers are RHEL 6 release.

  Post edited by: Umair_ali

  1 backup L0

  2 restore L0

  3. L1 and ArchiveLogs database backup

  4. copy BackupPieces L1 and ArchiveLog BackupPieces on new server

  5 CATALOGUE START WITH... to catalog the BackupPieces

  6. TOGETHER until lastavailable SNA / Archivelog + 1

  7 RECOVER DATABASE (should automatically identify the L1s and to apply ArchiveLogs)

  8 STOP

  9 START UPGRADE

  10. run catupgrd.sql

  You should also take care on the locations of the data file, dump, instance settings destinations, all link database from the database, connectivity application etc.

  Hemant K Collette

• Why Illustrator change my anchor points and size race randomly when I'm using the tool pen?

  Why Illustrator change my anchor points and size race randomly when I'm using the tool pen?

  k,

  It looks like you might be haunted by the Align attribute to the ghost of the pixel grid.

  You can select the entire document and untick finally align on the pixel grid in the Transform palette and uncheck also align new objects to the pixel grid in the options of the Launcher. It is crucial that the checkbox is disabled completely, not just a - which also count as ticked.

  It may be noted that even align with the pixel grid is cleared with all the selected objects, align new objects to the pixel grid is checked as the creation of new objects will result in these new objects being aligned, even when they are created from existing objects that can happen with Pathfinder operations.

  You can avoid the types of documents with the default (RGB for the web and other) or change the default value for such documents.

  Here is a screenshot of exquisite made per ton in the first post:

  https://forums.Adobe.com/message/7841770#7841770

• Need to size the Oracle RAC database settings and configurations as storage size % etc.

  Hi Experts,

  We have a requirment that we need size parameters of database to an Oracle database RAC 11g as the sizing of disk space, memory, and CPU (SAN), Cluster size etc what would the size of the recommendation for major banks or large project? Can you describe in sizes (TB). I'm not sure of the growth of the DB files on a daily basis and no customers.

  Thanks in advance.

  Viji

  It is a bit of an oxymoron.

  You ask for one RAC server sizing. When RAC architecture allows you to evolve by adding more servers.

  So if you have treatment volumeX to do, you have only 2 servers fabricant1 RAC to deal effectively with him. Or you can need 4 servers Fabricant2 CAR care effectively. There are many factors (unique to this client) which determines the choices made.

  So 'sizing' the server is not a matter to be treated, until you've decided just what type of server, you will use for your RAC (dual core, quad core, 8 cores, base 16, etc.), how much he must take care of the memory, the amount of energy, it would consume, it takes up the amount of space (rack units) in a Cabinet how much local diskspace, it must support, how many PCI slots must be to HBA and HCA and other cards, etc.

  Once this is decided (1 rack unit, dual core processors 4, 2 PCI slots, etc), can you evaluate vendors and server models available and decide how much of these servers must be purchased to meet the needs of data processing envisaged.

  If for example, the decision is 3 servers and after deployment, it is determined that server capacity has been underestimated, then a 4th server can be purchased and added to the cluster of 3 Server - and the cluster set scale to actually do deal with the volumes of data processing.

  One of the fundamental reasons for RAC is scalability. This means that only one server sizing is much less important than choosing the correct h/w architecture which allows to evolve this cluster by adding more h/w.

  It would be very stupid to buy and build a server 2 CARS which was 'size' for volumeX, then find that the volume is X + Y, and 2 servers can only be resized at great expense to 3 servers (for example 4 unit rack servers, rack unit space only 2 left in the cabinet, required for quad powersupply by server power cannot be satisfied for 3rd server) (, no fiber port more SAN, etc.).

• How can I change the size of the race for the Brush tool?

  Hey guys,.

  I wanted to know how to set the size of the race for the Brush tool? It seems I can only fix the pencil too race size. All suggestions are useful!

  Thank you

  When you select the Brush tool there are two points that appear at the end of the tools.  One is for the size of the brush, the other is for the shape of the brush.

  Something else to vary the size of the brush over is a zoom before or zoom out of the scene.  Size of the brush does not fit so if you do very small step the brush becomes very large comapratively.