Size of the DB for very basic Enterprise manager Installation

Similar Questions

• Photoshop can change the size of the canvas for very accurate measurements

  I need the exact measurements for the size of the canvas that needs to be 704,55 mm wide. I noticed that when I create a new document and insert this size for the width of the document it takes 704,51 mm if I check the size of the canvas under Image > canvas size. No explanation as to why it changes the size of the canvas to very exact dimensions?

  Thank you

  An image cannot be fractions of a pixel. Imagine that you have an image that has a resolution of 3 ppi. It's less than an inch to 3 pixel image. Now, you mean a size of 0.5 inch canvas. This would mean an image composed of 1.5 pixels, which is impossible. The image must be rounded to the nearest one who welcomes a whole pixel. You can either simply decide that it is good enough (it is usually), or use a resolution so that the size of your canvas has more pixels that can be divided into your desired size, then maybe you can be able to adjust your resolution exactly to the size of your canvas.

• How can I change the size of the race for the Brush tool?

  Hey guys,.

  I wanted to know how to set the size of the race for the Brush tool? It seems I can only fix the pencil too race size. All suggestions are useful!

  Thank you

  When you select the Brush tool there are two points that appear at the end of the tools.  One is for the size of the brush, the other is for the shape of the brush.

  Something else to vary the size of the brush over is a zoom before or zoom out of the scene.  Size of the brush does not fit so if you do very small step the brush becomes very large comapratively.

• How to reduce the size of the file for documents

  How to reduce the size of the file for documents

  The full version of Acrobat can do (not for free Acrobat Reader) for the pdf files.

  Please give us some info like what type of file you are talking about and software that you have at least.

• How can I change the size of the font for the comments/text call out boxes?

  How can I change the size of the font for the comments/text call out boxes?

  Hey sylviec10386621,

  Once you add any call box, select this option and press (Ctrl + E) to open its properties.

  

  Try this at your end and let me know how it goes.

  Kind regards

  Ana Maria

• set the maximum size in the Options for field text for a field in bi publisher RTF

  Hi all
  
  How to set the maximum size in the Options for field text for a field in bi publisher RTF.
  I have a RTF which is a field I need to add a validation condition, but after the addition of certain conditions in the text to add tab helps, it does not after a certain length, how can I increase the unlimited length, please help me on this
  
  Thnaks

  You can try to keep the validation condition outside instead of form fields

  as do

  or

  If you want to use form fields break your calculation and use 2 or 3 form fields so that you have any calculation of form fields.

• Size of the file for DPS

  Hello

  I'm trying to compress the size of the file for DPS.

  I tried to resize to 1024 x 768 images before placing them in the file and I was wondering if it would make a difference?

  By example, if I place a picture of 3000 x 3000 pixels in the DPS document compresses it anyway?

  Kind regards

  Chris

  For all, but the overlays pan and zoom and pan images are down sampled at

  108 of PPIS for PDF folios. There is no real need to do anything in Photoshop.

  Simply place your image and your scale in InDesign.

• Is there a limit to the amount of the size of the hard drive that it can manage Windows Vista Ultimate?

  . I am trying to install a disk hard external sata 3 TB

  It would be only format 2.3 TB. Is there a limit to the amount of the size of the hard drive that it can manage Windows Vista Ultimate? If so, is there a way to enlarge it.

  Vista only supports drives of 3 TB for storage of the data and do not install the Vista operating system on this drive.

  Read this: http://msdn.microsoft.com/en-us/windows/hardware/gg463525.aspx

  J W Stuart: http://www.pagestart.com

• Install the latest version of Oracle Enterprise Manager Cloud control 12 c

  Hello
  We want to install the latest version of Oracle Enterprise Manager Cloud control 12 c in Linux x 86-64 (64-bit) platform. Oracle Web site
  link http://www.oracle.com/technetwork/oem/grid-control/downloads/index.html we found 12.1.0.2 is the latest version.
  
  My query is-
  
  is 12.1.0.2 version is the latest version for the control of cloud?
  If we install 12.1.0.2, is there a patch to be applied after update install the latest version?
  
  Thank you

  As mentioned Rob you should also check My Oracle Support for the recommended patches. Go to patches and updates | Search patch | Research | Recommended Patch advise and serve 'Business Manager Base platform - WHO' the product. You can use this to get a list of the patches to be applied.

  Best regards, Marc.

• Lost the disk for my Canon Pixma ix6820 installation, is there something I can download instead?

  I lost the disk for my Canon Pixma ix6820 installation, is there something I can download instead? It is a mac.

  Thanks for any help or ideas.

  http://www.USA.Canon.com/Cusa/support/consumer/printers_multifunction/pixma_corporate_graphics_art_p...

• Size of the queue for Signal form write XNET

  Hello

  I am using the XNET library to play a preset on an output signal waveform. I work with LabVIEW 2014 SP1, 14.5 XNET on a W7 Pro 32-bit operating system. I use an NI PCI-8512 map. This is my first app using the xnet library.

  In my test application, I give the user the ability to set the waveform to play. The total duration and the sampling frequency can be set. The output MAY report is cyclical, with a cycle time of 0.01 s (10 Hz). I chose to use the same frequency for example my wave form and writing of the CAN.

  I have difficulty working with the size of the queue. In this example, it's good but I did not really why. I tested different values in the size of the queue and 100000 seems to be good up to 60 seconds. But for the longest (about 5 minutes), this method is not good...

  

  What is the right way to work in this mode and how use efficiently the property size queue? Information and example of using software and hardware OR XNET are not very convincing...

  Thank you in advance!

  You can add several items at the end of the queue until the queue is empty.  So if you want to write 10,000 points, and your buffer is only 1000 points, then wait and monitor the number of messages remaining in the buffer, and once it is less than 100 say adds an another 900.

  I used this method for flashing on CAN and LIN.  I needed a way to watch specific at specified times images, and a single point of frame link would not repeat (which could write the same byte twice what would be bad) I could have made the rivers and used avoiding, but a better solution was to use queue and add more pictures at the end of the queue to try to keep it as complete as possible.

• Set the size of the window for DOS applications running on the Windows XP Pro machine

  I have some old Basic (QBasic, Flodraw) DOS programs I still want to run occaisionally. 2002 was the last time I used them, so I don't know what OS was running then. When I run the application now that open windows are not ideally sized, the Flodraw is too big, I can't see it as much of the screen as I would, and QBasic is too small to get enough text to keep my train of thought.

  Anyone know how I can get control of the size of the window? I need create .pif or something like that?

  Thank you.

  Right click on the shortcut for the program icon, and then click Properties. You will see where you can set the size. MS - MVP - Elephant Boy computers - don't panic!

• Fix the size of the MTU for the E4200 using DSL?

  I wanted to check the MTU size manual correct setting for the E4200 using DSL.  An indifferent Linksys Tech told me that the correct MTU size should be manual to 1375. I am running firmware v1.0.01 basically, I have a Mac connected to the E4200 and 2 wireless computers.  I would like to get the best speed of the Internet I can, wire and wireless.  What do you suggest me? Thank you.

  See here

• size of the file for video on the web

  Hello world

  I exported just a 10-minute video using the H.264 format and preset YouTube HD 720, but the size of the file ends up being about 611 MB.

  I lowered the bitrate, and then I got the file size down a little but not a lot. I was just wondering if this is what size usually is a 10 minute file or if I can reduce the size somehow, except using bitrate

  Would be very grateful for any advice.

  Thanks in advance

  I was just wondering if this is what size usually is a 10 minute file or if I can reduce the size somehow, except using bitrate

  You can also reduce the size of the image and/or reduce the pace.  The size of next standard frame down to 1280 x 720 is 960 x 540 and 640 x 360 after that.  In fact, fewer pixels produces a smaller file.  For all lower frame rates go, you could reduce it by half (so 29.97 FPS reduced to 15 fps and 24 fps to 12 frames per second); However, this affects the quality of movement, and the H264 is so effective that it is rare to reduce your frame rate, these days.

  Is too large because of your internet 611 MB upload?  Or do you need a smaller file to fit on 521MB USB Flash drives or some other limitations of storage?

  -Warren

• IF database-> RAC database: estimate of the size of the SGA for each instance

  Hello!

  Let's say that there is a single instance with SGA 100 G size DB (assume this size is optimal for this database).

  If this database is intended to be converted to a RAC database with 2 instances (suppose DB workload will be spread over multiple instances).

  How to estimate the needs of SGA size for each instance in the RAC database?

  It takes 50G + General cool CARS (say 15%) for each instance?

  (Do not consider situation when one of the instances has failed, and all the charge redirects to an instance having survived)

  I'd be grateful if someone has offered or provided useful references.

  ---

  Kind regards

  Kyrylo

  As a general rule, I would size the SGA on new nodes to 120% of the SGA to single instance. Yes, this means that you will more than double the size of the SGA. You will need additional space to hold the load memory Cache Fusion. And the buffer Cache are possibly a little more space to store additional versions of blocks that seem to accompany the many implementations of CARS. Now, it's just a rule of thumb, so it has a high degree to be very wrong.

  You'll want to consider two big things... (1) the service being used. Will you take advantage of the services to perform the partitioning application? If so, instances can see various workloads that can lead to requests for different resources. (2) you will support a kind of failover (TAF or manual failover) applications? If so, then the LMS must be sufficiently sized to support the additional workload.

  See you soon,.
  Brian