Size of the file after conversion to the format even

Similar Questions

• Cannot increase the size of the cache, even if I put it at 500 MB, it shows 27,65 mb, what should I do?

  I can't increase the size of the cache. everything I put in the décor, it says max cache limit 27,65 mb. I have 3 GB of ram and 200 GB hard drive.

  1. Press Alt + T
  2. Click on Options
  3. Tap the category advanced options
  4. Under this exclusive network
  5. Check the box "Override automatic cache management.
  6. Enter your desired value.

  

  Note: If the answer to anyone who solves your problem, then please mark this reply as 'resolved' right of this response after log you in to your account. It will help us to focus on new questions.

• You can copy the legal size in the format on 8500 a letter?

  I want to take a legal size document and copy it on a piece of paper letter size using the 8500 has.  You can set an option of resizing 'Fit to Page' but the glass surface is not large enough to hold the legal size paper.  I get an error if I try to put the piece of legal size of paper in the document feeder when the "Fit to Page" option is selected.  There should be a way to do it, but I can't understand it.  Any ideas?

  Hello

  You should be able to make these settings in the copy menu. There is actually an option in there that is called legal letter 72%. See the screenshot of the menu copy below.

  

• Increase in size of LR files after import

  After importation for LR 5 file size goes from 20 to 30 MB to 40-50 mb.  Upates are current, no prefferences have been changed.  This problem occurs with both cameras of difference.  What happens, how can I solve this problem.

  Thank you, problem solved.  A checkbox 'inbed original raw file' has been verified.  Next imported file was the right size.  After re-verification of preferences, the problem became clear.

• How to determine the size of the binary file data set

  Hi all

  I write specific sets of data in table in a binary file, by adding each time so the file grows a set of data for each write operation.  I use the set file position function to make sure that I'm at the end of the file each time.

  When I read the file, I want to read only the last 25 data sets (or numbers).  To do this, I thought using the position set file to set the file position where it was 25 sets of data from the end.  Math easy, right?  Apparently not.

  Well, as I was collecting data file size as I began the initial tet run, I find the size of the file (using file order size and get number of bytes so) as the size increases the same amount every time.  My size and the format of my data being written is the same every time, a series of four numbers double precision.

  I get increments are as follows, after the first write - 44 bytes, after 2nd - 52 bytes, 3 - 52 bytes, bytes 44 4th, 5th - 52 bytes, 6 - 52 bytes, 7th - 44 bytes and it seems to continue this trend in the future.

  Why each write operation would be identical in size of bytes.  This means that my basic math for the determination of the poistion of correct file to read only the last 25 sets of data won't be easy, and if somewhere along the line after I've accumulated hundreds or thousands of data sets, what happens if the model changes.

  Any help on why this occurs or on a working method, all about the problem would be much appreciated.

  Thank you

  Doug

  
  

• from MPG (Windows) in the format MOV (Mac) - get a reading of nervousness

  Short version: I have videos of nervousness after moving them to a Mac and the creation of a DVD.

  Long version:

  I have a large number of videos in MPEG format, rendered family in Sony Vegas on a Windows machine. They are 720 x 480, 29.97 FPS, 48000KHz.

  I'm trying to move things a Mac and find that Mac don't like mpgs. So, I used Adobe Media Encoder (CS4, in Windows) to convert several for QuickTime (mov) files, using the default settings for QuickTime - DV NTSC:

  Video: 720 x 480. 29.97 FPS, low

  Audio: 48000 kHz, stereo, 16-bit.

  Everything seems fine (although I am amazed how much more the mov files after conversion). They play fine on my screen, under Windows or Mac.

  The problem is when I finally do them in a DVD of still (still CS4) on my Mac. The videos play very unstable on television. It is not too visible when there is no action, but in a scene that moves a lot, it starts to hurt the eyes and head to watch. To make sure it wasn't a problem with the original files, I made the same DVD again using the original files on my Windows machine and it plays nice and smooth.

  I use the default conversion settings in Encore. I wonder if something is creating the jitter.

  Should I convert to a different file in the first place type? Are there any other settings I need to check? Any other ideas? Thanks in advance.

  What CODEC MOV did you use?

  I'm also surprised that Mac still cannot use 100% compatible MPEG-2 DVD, because they are the "bricks" of DVD-video, regardless of the platform. That's what the Mac has to write. Conversion from MPEG-2 to any other format and then transcoding MPEG-2 will show the questions, in particular with the movement, object or camera. It's like a FAX, a fax - never going to be as good as the original, printed DOC on the Laserjet Printer.

  It could be a better flow of export production of PrPro (PC) as a MOV [Animation] CODEC and then let another Mac Transcode the MPEG-2. I'm just not in place on that like the Mac better still, so may be all wet here.

  Yet as more Mac can make 100% compatible MPEG-2 DVD, I can't imagine that they would be problematic for the program.

  Good luck

  Hunt

• The icon file size will not remain after changing

  On the folders on my computer I like a size of specific icons since I bought my computer 2 years ago, I was able to change the size of the icons of files and it stayed like that.  Now if I change the size of icons it will stay like that until I close the file and reopen it.  Whenever I have open and close a file, it causes the size of the icons for items in the default folder for the "details".  This happened recently, after I installed updates to windows.  These updates were important and I don't want to uninstall it, just to get my favorite file size.  Does anyone know how to prevent the default of payment of a certain size icons?

  Hi Ocman76,

  If the issue is not past in your guest account, it could be that your user profile might be corrupted.  Take a look at the article below, with the steps to solve the problem:

  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  I hope this helps!

• Size of the file too large on/after export. Takes too long to download on youtube

  Hey everybody! I still have my question answered so I hope you all can help me with this. I intend to upload my videos to youtube, but there is a problem. The size of the file for the aftermath is far too large, so it takes hours and hours to load up on youtube. The size of origin when it's done export is about 2 000 000 KB... I think this is equivalent to 2 GB! It's huge for youtube. Even after that I have to encode it with media encoder, it is still huge. It does not decrease the size of the file about 2 000 000 KB 500 000 KB, which is in my opinion a GB & half fallen out of the original. But I am looking for the size of the file between 300-500 MB when I upload it to youtube. That's about 0.3 to 0.5 GB. I also used the youtube preset in media encoder export. If anyone can help me identify this problem, I would be very happy. Thank you!

  Oh it's you... with the expression of timecode. Well I see that you move on! close to there. your screenshots are the after effects render settings and output Module that are relevant to make a file without loss is to say good for further editing or encoding later. We were talking about before Media Encoder, which is what you should use to encode the files (NOT the Codec Mpeg4 that we see here). I see that you have about 5 minutes. If you want to download on youtube, you can use these recommended settings table: recommended encoding download - YouTube Help Center settings. under flow, you can see that the recommendation for 1080 video is 8Mbps. you can use these settings in the settings of your SOUL or the preset default value of Youtube, which is twice the speed of transmission. 10 seconds of HD1080 at 8Mbps is around 10 MB of files. 5 minutes will be about 300 MB. If you choose the preset, it will be 600 MB. shipment of 300 MB with a standard 1.5 Mbps download speed will take about 30 minutes.

  If you want to encode your file, you have two options:

  1 make your file using a lossless format: Animation of QT for example - then take this file to SOUL and encode using a setting predefined YouTube

  2. make and encode your files at the same time by choosing your publication by clicking on the composition-> add to the queue of the SOUL. Choose the preset of youtube

  in these two options, you can see about your final file size - this is an estimate

  

  and after that, you can download your file as expected and win the $$$ that you deserve, if people dig

  more info on the process and much more geeky information are here in my tutorial:

• During a conversion attempt has us page to PDF in explorer11, does not in all folders in the list of the file Explorer. The olny happened after conversion to win 10

  During a conversion attempt a webpage to PDF in explorer11, does not in all folders in the list of the file Explorer. The olny happened after conversion to win 10

  Hello

  We could not see the attachment. Let me tell you how you can attach the file.

  1 - Select the icon of the image of the top toolbar.

  

  2. then click on "select a file".

  

  3 - Select the image you want to download.

  

  4 - Click on "insert image".

  

  I hope this has been helpful.

  Thank you!

  Shivam

• I'm trying to reduce the file size of a jpeg file, but the dialog box under image > image size reflects a much smaller that the file is. I saved the image after resampling and by reducing the size of the image, reduced the pip to 72 and lowered the qua

  I'm trying to reduce the file size of a jpeg file, but the dialog box under image > image size reflects a much smaller that the file is. I saved the image after resampling and simplistic image, the pip size reduced to 72 and lowered the low quality only to see the minimum file size reduction. Why the dialog box in photoshop gives me a different file size than my computer and how do I solve this problem? Thank you!

  The Image Size dialog box dialog box shows the uncompressed size.

  Your operating system (Explorer/Finder) shows the size compressed. (size on the disk)

  If you use save for Web, you can see the compressed size, but also an overview.

• First file after the launch is a tiny spec @ 3% full size

  Open the first file after the launch of 3% of full size. Every time. All started to do this out of the blue. Anyone with similar behavior? (15 "MBP with OS X 10.10.1 retina)

  If it's Photoshop, try a reset of preferences:

  Press CMD-SHIFT-OPTION immediately once you double-click the PS icon.  'Yes' to delete the Adobe Photoshop settings file.

• Size of the file after scanning a slide

  After scanning a silde in TIFF format, when I import into the library Lightroom file size is only about 1/6th the size of the file scanned on my hard drive. A scan of 50 MB becomes a LR 8 MB file. If I take the file in Photoshop, he's still 50 MB. I tried to save the photoshop file with a different name and then put in LR, but she ends up always in 8 MB. I have the same problem using VueScan 9.0.90 both the software of scans Silverfast 8.0. How to keep the size of the original file?

  LR4.3 is updated

  OS - X 10.8.2 is up-to-date

  Pacific image Electronics Powerslide 5000

  Software Imaging is 9.0.90 VueScan and Silverfast have Studio 8

  Any help is appreciated

  You misread the info for the magnifying glass; It does not say 8 MB (megabytes), it says 8 MP (megaPixel). It is something completely different.

  I would recommend that you select instead of for display. It's a much better idea how wide is your file, and if you divide the dimensions cropped by 300 you get to the size of the typical print of this image (without resizing) file.

• FLA, the size of the file is too big and will not reduce even after the removal of assets

  I loaded a png sequence in a FLA file. This makes the huge file, so I decided to remove them. However, this has not reduced the size of the DFL. I checked the library and deleted the PNGs with no luck. I even deleted all forms of asset library and deleted all the content of the scene and the timeline, but the FLA is still almost 1 GB. How can I fix it!

  I think that there is another bug in Flash.

  I don't know who marked this as "right answer", but he did not work for me!

  I took a whole new folder full of JPGs and then tried the above suggestion. Then for good measure, deleted ALL the content of the FLA file and emptied the library. I tried and then clear the Cache of publish and save as. The FLA file (empty) is always greater than 50 MB!

• Reduce the size of the PDF file after extending player features.

  When you create dynamic PDF form in LiveCycle Designer ES 8.2.x, the size of the file is < 200K. At the opening in Acrobat 9 Pro and extending to the Acrobat Reader, the file size > 1.2 MB. Is it possible to reduce the size of the file?

  Thank you!

  -Christelle

  Hello

  Check out the blog of John Brinkman here, which has several links to other discussions: http://blogs.adobe.com/formfeed/2010/09/xdp-size-matters.html.

  Hope that helps,

  Niall

• JMS store the size of the file continues to grow

  Hello

  In our production system, the file size of the JMS store continues to grow (1 GB per day and statitistics on the show file size it is linear in time, so not because of a burst of time messages).
  First we thought that this is due to unconsumed messages or transactions not recognize, but console weblogic JMS statistics view current or pending message in one of the WAD of the file (and the application logs does not trace of error).
  The only exception is some of the messages that go on a SOL JMS file without being consumed her, but it's only 2000 messages to them and which represent all together less than 10 MB, so it doesn't seem to be related (unless there is a very specific fragmentation problem that ignore us).

  In addition, we have compact the jms store files using WLST and several trips are compact in 7.1 MB:
  Before:

  -rwx - 1 webadm webgrp 1, 24 3 August 10:51 FILESTORE_CANOEJMSSERVER_1000000.DAT

  -rwx - 1 webadm webgrp 1, 24 3 August 10:53 FILESTORE_CANOEJMSSERVER_1000001.DAT

  -rwx - 1 webadm webgrp 761 M 24 August 10:54 FILESTORE_CANOEJMSSERVER_1000002.DAT

  Command:

  Java weblogic.store.Admin

  Compact - ed.

  quit smoking

  After:

  -rw - r - r - 1 webadm webgrp 7, 1 M 25 August 11:33 FILESTORE_CANOEJMSSERVER_1000000.DAT

  We also release the content of the file using wlst, and we get an xml file of 11 containing only the message in the DLQ JMS file.

  The application treats about 10,000 JMS messages every 5 minutes on both nodes of a cluster. Watch application logs that he used successfully up to approximately 150 JMS message in a second.
  The size seems to increase only on the first node (the second node jms store file size is 50 MB without be compacted, 1 MB after beeing Compact):

  -rwx - 1 webadm webgrp 54 M 24 August 10:55 FILESTORE_CANOEJMSSERVER_2000000.DAT

  We have not seen this problem on other platforms.

  We do not know whether it can have a link, but the disk partition where the Bank JMS file are is not the same on the production platform.

  If you have an idea about the source of the problem or the things we should look at to understand what is happening, it would be greatly appreciated (because the problem appeared on the production platform, we have no access directly and must apply to the intervention. Thus information on the problem is not as easy as we would like to be).

  Thank you.

  Kind regards

  Hello

  To keep this conversation updated some information.
  So we managed to avoid this problem by failing to put messages in GENERAL store (and instead of remove them). A special consumer on the file have certainly solve the problem too.
  It seems that the jms server could not reuse space of the message successfully consumed for about 10,000 are added simultanesouly (every 5 minutes) and some of the 10,000 messages (3 to be exact) are unsuccessful are wrong and go (after 3 unsuccessful attempts) in file DLQ JMS in the same jmsstore.

  Note: in this case, add a limitation on the maximum number of bytes the Server JMS or modifying synchronous write strategy does not change the behavior: the size of file storage continues to increase until the file system is full.

  [edit] I forgot to mention that we you of the different priorities of JMS to the message in the JMS file [/ Edit]