Size of the OOB change user profile attribute

Similar Questions

• Windows continues to change user profile folder

  Hi all
   
  I'm facing a real headache. My computer continues to change user profiles folder every restart 2 or 3. For example, my user name is MSF\Bob. The user profile folder has been C:\Document & Settings\Bob. After a restart, Windows create a C:\Document & Settings\Bob.MSF then Bob.MSF.000 and Bob.MSF.001 folder and so on.
   
  Someone has an idea why this is happening and how I can prevent this?
   
  I thank very you much in advance!
   
  Best regards

  Easy question to answer.  You simply have a corrupted profile.

  When Windows detects a corrupted profile, it automatically generates a temporary with names profile as you describe.  Usually, these profiles are deleted when you connect your computer turned off, but not always.  The solution is quite simple.  You just need to recover your corrupt profile.   There are two general approaches.  One is to do a system restore to a point in time before the profile was first damaged.  The other usually involves the creation of a new user and moving profile data on to the new user (you may reset some of your settings).  To do this, choose one of the following articles and follow through:

  "How to recover damaged Windows XP user profile"
    <>http://support.Microsoft.com/kb/555473>

  "How to copy data from a corrupted to a new profile in Windows XP user profile"
    <>http://support.Microsoft.com/kb/811151 >

  "Windows XP problems if your profile is corrupted"
    <>http://support.Microsoft.com/kb/326688 >

  HTH,
  JW

  PS: Corrupt profiles are almost always accompanied by alteration of the disc as well.  After your recovery, perform a check disk (chkdsk) with the "/ R" or "/ F" option

  "How to perform disk error in Windows XP check"
    <>http://support.Microsoft.com/kb/315265 >

• Get the Error Message: "user profile service service has no logon. Unable to load the user profile"after you remove the Windows Vista administrator account

  Original title: deleted Vista ultima. admin identity and admin authorization password for standard users will not work.

  I inadvertently deleted the admin. identity, I think in Vista Ultima. The photo shows still on the identities, but when I try to open the identity I get the following message, "user profile service service has no logon. User profile cannot be loaded. The admin. password does not work in any of the other identities now, so I can't do updates to most of my programs, such as windows. I can't open the control panel to add and change of identity.

  Hi JBRA47,

  You can consult the following Microsoft KB article and check if it helps to solve the problem:

  Error message when you log a computer Windows Vista-based or Windows 7 by using a temporary profile: "the user profile Service has no logon. Unable to load the user profile.

  http://support.Microsoft.com/kb/947215

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How can I move the location of user profile directory

  I found a way of coding to change the directory of the user profile, but I fear that it would break my system
  http://joshmouch.WordPress.com/2007/04/07/change-user-profile-folder-location-in-Vista/
  is it ok to use it, or Microsoft addresses this problem? because I want to use the user icon in the start menu of the head for my files instead of move each directory to another location in the folder of the user

  Rania saber,

  See the following article on the measures needed to redirect a folder in Windows Vista. What follows is a safer alternative to editing your registry keys:

  http://windowshelp.Microsoft.com/Windows/en-us/help/fc52162a-eff9-4742-4D29-cb71226f21781033.mspx

  Let us know your result. Please use the Support Forum for Microsoft Vista.

  Rami
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• "Unable to connect to the computer error' user profile failed to connect.

  Original title: reset windows password after being locked up and he treated the new password, but I'm still locked. I don't have a password reset disk. What should I do now?

  Tour computer off standby. And when I turned it back the next morning that my password would not work. Figured out how to change the password but still getting the same message and still locked. He did deal with the new password, but just do not let me in. I don't have a password reset disk. What should I do now? Any help is greatly appreciated. I have to deal with my computer and must be able to use it as soon as possible. Thank you

  Also says "Service user profile service does not logon.

  You suffer from the dreaded problem 'user profile '. I don't have a good solution, but if you type the entire error message into a Google search box, you will get countless successes with at least some of them containing good advice.

  No one gets a Windows repair CD when buying a PC. You need to burn it yourself via the control panel / backup and restore. It only takes three minutes and having one is absolutely essential for those who wish to make their own PC maintenance.
  Talking about the essential things: a fully tested alternative admin account is one of them. Without one, you can get in diabolical trouble (the same as when not having is not a spare House key where to break a window is a radical and totally useless but effective solution).
  It might be possible to solve your current problem as follows:
  1. keep tapping F8 during the first phase of startup.

  2. select Repair from the menu.

  3. Select an administrator account, and then enter its password.

  4. When you are prompted, select System Restore.

  5. set Windows to a point well before this problem occurred. This will outline also all passwords to their old values.

• Size of the image changes when you move an image between Lightroom and CC.

  Size of the image changes when you move an image between Lightroom and CC.

  I opened a .dng image in LR and then opened it in the develop module.  I clicked on Crop Overlay and then on the "As Shot" (the lock is closed) menu drop-down and cropped to 11 x 17 and click 'Done '-.

  I click Ctrl-E and the image opens in the CC.  I click on the Image > Image size and the size of the Image is 13,288 inches on 20,533.

  Why change the size of the image?

  I believe that there is a menu to control the size of the image, and I've looked everywhere I see in LR and CC, I have googled various descriptions and I checked both Kelby books, but I can't understand not just how to keep the image at a uniform height when moving between LR and CC.

  Help!... Please?

  The size of the image has not changed. The number of pixels has not changed. Let me tell you. The number of pixels has not changed to a single pixel.

  The numbers relatively meaningless displayed by your software have changed.

  The image is always format 11 x 17 (17 divided by 11 = 1.545 and 20.533 divided by 13.288 = 1.545)

• Size of the strange changes when you save the file to the jpeg format

  Hi all!

  I have a small question (I think!). I have some images I save as jpeg files. So, I noted today that alone (it worked fine yesterday) when I go to save the file on the web, the size of the image changes of 400 high px to 430 px high. I select nothing do each file change like that. There is a white box at the top of the image (which is not well 4 my image). When I reduce the size of the jpeg - it reduces the image (so the rest of the white area).

  Does anyone have a suggestion? What happened with more than one image.

  Thanks 4 your help, Marty

  If you have to convert to jpg images, use photoshop.

  If white is on top is 30 pixels, then you have a point in your document or something that is not visible, but adds the frame enclosing the image. Make a command Y in illustrator to see if something is there. Also, if you place images in Illustrator, your original image can have a clipping path or something that adds to your bounding box.

• How to change the name of user profile

  Original title: change of name to issue... help

  On my computer, my user profile will appear like this: THEDIAMONDMINE\Mrs Campbell Ali, how can I change the part of Ms. Campbell Ali?

  Hello

  
  This is an administrator account?
  You cannot change the name of the user profile to the location of the file. But instead of this, you can create a new user account and then transfer data from user profile (Ali Campbell of THEDIAMONDMINE\Mrs) for the new account and can set the new user profile name. You can see the following link.
  Create a user account
  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account
  To copy data from user profile for the user account, you can see the following link.
  Difficulty of a corrupted user profile
  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile
  See the section: to copy files to the new user profile
  It will be useful.

• change the name of user profile

  I need to know how to change the name of the user profile. In the control panel if you go to systems and from systems protections, under Advanced there is a section for profiles user... when I click on this it is one another name other than mine because it was not origanally my computer. I was wondering if there is anyway to change that. This name appears under my documents, pitures and everything. I would change it if there is a way... Thank you

  Hello

  1st brand a new ADMIN account with your password-you want another to test and correct in case
  your present corrupts. (Yes now you have 2 accounts for just you - the two ADMIN)

  2. create a Restore Point

  How to create a Vista System Restore Point
  http://www.Vistax64.com/tutorials/76332-system-restore-point-create.html

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
  3. make sure that there is nothing in the files of the users of this account you need - check using Start-
  Computer or Windows Explorer while logged in as an administrator. If there is copy the files/folders as needed
  not to this user account that it will be deleted.

  4 control panel - user accounts - manage another account - double click on this account - remove this
  Account.

  How to remove user profiles correctly
  http://www.windowsnetworking.com/kbase/WindowsTips/WindowsXP/AdminTips/miscellaneous/Howtodeleteuserprofilesproperly.html

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• The user profile is not the connection. User profile cannot be loaded.

  original title: account login

  When I type my password, I get the message: the user profile has no connection. User profile cannot be loaded. I have two accounts and other newspapers with no problem. Can you help me? I use Windows Vista Home Premium.

  Hello

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
  Mode has no default password (unless someone has changed the password so it should be available).

  Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
  has been known to cause this problem.

  Error message when you log on a Windows Vista-based or Windows 7 using computer a
  Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have been connected with a
  temporary profile. "in Vista
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.

  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  Use the Admin account hidden to lower your user account APPLY / OK then wear again to
  ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
  above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
  password (or two with the same password) use a test or difficulty to another.

  You can run the Admin account hidden from the prompt by if necessary.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  If you cannot access your old account, you can still use an Admin to migrate to another (don't forget
  always leave to an Admin who is not used except for testing and difficulty account).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• How to change user profile

  I'm working on a project to change the user profile within a given time (Normal to silent or vibrate), but I can't find any document of the bb developer page.

  Please help me. Thank you very much.

  Look at NotificationGlobalSettings, setMode()

• Cannot connect to the system Windows - user profile service failed to connect

  I can't connect my laptop for the 1st time

  I get an e-mail from the user profile failed to connect

  User profile cannot be loaded

  Ideas please

  If you have a Toshiba SSD in your laptop there is a problem in windows 7, making it impossible to connect to the system when the storage TOSHIBA utilities are installed. In this case, you will need to find a way to get the system and uninstalling.

• Cannot access my safe after the migration of user profile

  Hello everyone, welcome to Australia

  I have a user who migrated their user profile from windows to the field of our profile by using the small business server 2003 to connect Computer Wizard. This wizard have not migrated users or My content Safe fingerprints.
  After connection to the old account and attempts to access my safe with password backup, user could not open it.

  Is it possible for the user to access the content in the folder of the safe MYy that these documents are very important. (Take the user to back up only not ;)))

  Hmmm maybe it's not possible to access the MySafe because the laptop is a part of the domain of s.
  I guess that the laptop was not included in the field when the user has used and saved the files in my safe.
  So maybe you could try to reverse the settings and then you might try to enter the folder MySafe.

• Size of the mouse changes randomly

  Good then when im working on my computer the size of the mouse gets super big as in if you go to the mouse settings and change to the largest size possible. The problem is that I did all this and its set to normal size so I don't understand why its so great...

  http://www.Google.com/#hl=en&source=HP&q=big+mouse+cursor+site%3Alenovo.com&AQ=f&AQI=&aql=&OQ=&gs_rf...

• How to recovery when the XP Home user profile disappear

  XP Home won't miss all the icons in the menu programs after I login by john.

  However, I believe the user 'john' disappear on Documents and Settings when I connect by another user to view the user profile.

  Hi Mark,

  Please see the following:

  How to copy data from a corrupted to a new profile in Windows XP user profile