Cannot access my safe after the migration of user profile

Similar Questions

• Cannot return to snapshots after the migration of vm manual

  After recently migrating a virtual machine manually (downloaded all the files from the environment virtualcenter 3.5 data store, copied in a vsphere environment completely separate data store, vmdk has added to the inventory)

  I get this error when you try to go back to a snapshot.  (All snapshot files are also copied to the new location)

  "The features supported by the processor (s) in this machine are distinguished by the features supported by the processors in the computer on which the checkpoint was saved."  Please try to take the snapshot on a computer where processors have the same characteristics. »

  Any contribution on this much appreciated - thank you

  but I think the trick to delete the vmsd will work

  Here's a n to replace the d in "vmsd.

  André

  Forum upgrade notice:

  VMware will be upgrading systems VMware communities between December 10-12, 2010. During this time, the system will be placed in READ ONLY mode.

• After the migration of the catalog security issues

  Hello
  
  We installed a new environment of Sys (11.1.1.7.0) and now need to migrate the OBI of Dev (11.1.1.7.0) objects. Everything works as expected in Dev with connection and view dashboards appropriate according to the permissions of the users. Now, after the migration to Sys when we try to connect to hostname:9704 / analytic all users cannot see the table edge and catalog of objects. WebLogic even does not see everything. I can see items in catalog offline through the Manager of catalog or Windows Explorer. If I look at the catalog using the Catalog Manager my permissions do not allow me to see all items in folders. However, Dev, I am able to do. It seems that some thing is out of sync btwn the catalogue and policy store even if users have the relevant groups assigned in the weblogic LDAP. Any ideas on what might be happening or how to fix?
  
  Migration process:
  (1) store the migrated policies and identity sys Dev store. Confirmed objects have been migrated.
  (2) migrated RPD and sys Dev catalog. Confirmed objects have been migrated.
  (3) refreshed GUID in Sys
  (4) services start successfully
  
  Kind regards
  Mike

  Hi André.

  I worked with Mike on this permissions problem and can provide feedback.

  I compare the "Shared folders" privileges between the two environments, DEV (works) and TEST (does not work).

  The DEV environment has:

  Name - Type of permission - details-
  ------------------------------------------------------------------------------
  -Authentication user - Application role - total control - control total
  -Presentation Server Admins - role of catalog - full control - full control

  The TEST environment has:

  Name - Type of permission - details-
  ------------------------------------------------------------------------------
  -Admin BI role - Application role - full control - full control
  -Role of consumer BI - custom...-read, through, etc. - the Application role

  I'm changing the TEST environment to reflect our operation DEV permissions:

  Name - Type of permission - details-
  ------------------------------------------------------------------------------
  -Authentication user - Application role - total control - control total
  -Presentation Server Admins - Application role - full control - full control

  I am now able to log in as my administrator user and have access to the appropriate objects.

  I have a few questions, I hope you can clear up however.

  (1) something in our process of migration to our TEST about. must have updated the privileges of shared folders not to include roles authenticated the user & Presentation Server Admins/groups. It's weird, because we migrated all our DEV operating environment around. No indication of what we have fact/lack would be useful.

  (2) authorities 'Shared Folders' REP on my DEV TEST Server vs server, the type of role is 'Catalogue', and 'Application' on the other. How we do conversion as a catalogue to an application from DEV to TEST role?

  DEV:

  Name - Type
  ------------------------------------------------------------------------------
  -Presentation Server Admins - role catalog

  TEST:

  Name - Type
  ------------------------------------------------------------------------------
  -Presentation Server Admins - Application role

  Much obliged.

  Ben

• How can I find my username and password for Windows xp media center? don't remember setting but cannot get back in after the restart.

  How can I find my username and password for Windows xp media center? don't remember setting but cannot get back in after the restart.

  Hi Carol_971,

  1. Did you the latest changes on the computer?
  2. You have security software installed on the computer?

  Method 1

  I suggest that you try to start in safe mode and then try to log on to Windows using the default Administrator account and then remove the password for your account, check if it helps.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Method 2

  If you are unable to log on to Windows in safe mode, refer to the article below and then try the steps mentioned, check if it helps.

  How to connect to your Windows XP-based computer if you forget your password or if your password expires

  http://support.Microsoft.com/kb/321305

• Cannot access Windows Gadgets because the message only the administrator is permitted.

  Original title:

  I am logged on as administrator (only 1 person on this computer) but I get messages that only an administrator can access some files (for example the Windows Gadgets))

  I have Windows 7 Ultimate, only one person has this computer (me), I installed as admin (no other account on this computer).  Cannot access Windows Gadgets because the message only the administrator is permitted.  I AM THE ADMINISTRATOR!  Why is this happening?

  Hello

  1. you only receive the error message when you try to access the "Windows Gadgets"? What is the full error received?

  2 have you made any changes to the computer before the show?

  Method 1:

  Step 1:

  Check if you are able to access to the files and programs into account administrator in safe mode.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Restart the computer to return to normal mode

  Step 2:

  If you are able to access all files and programs to the account administrator in safe mode then I suggest that you create a new user to the administrator.

  Create a user account

  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

  Method 2: Try the steps from the following link and check:

  How to open a file if I get an access denied message?

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-open-a-file-if-I-get-an-access-denied-message

   

• I'm unable to access Apple Store after the iSO download 9.3.1 on iPhone 4S. How can I fix the problem

  I'm unable to access Apple Store after the iSO download 9.3.1 on iPhone 4S. How can I fix this problem?

  What happens when you try to access the Apple Store app?

• Cannot use windows update after the new installation of xp sp2

  Cannot use windows update after the new installation of xp sp2

  How to reset the Windows Update settings?
  http://support.Microsoft.com/kb/971058

  Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• Cannot access Pathname you have the appropriate permissions. Cannot download updates gives error code 643 and error code 5. Always gives access denied.

  Cannot access Pathname you have the appropriate permissions. Cannot download updates gives error code 643 and error code 5. Always gives access denied. You do not have the appropriate permissions. I am the administrator. Change all the complete control. Any other suggestions? Possible virus?

  Hello

  You are unable to download the updates?

  Try the following steps to resolve the problem:

  Method 1: Temporarily disable any security (including firewalls) software and check if the problem persists.

  Check out these links:
  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  If disabling the security software solves the problem, then contact the manufacturer of the specific security software to fix the problem.

  Important: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable
  your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are
  connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2:
  See the article mentioned below and run the Fixit diagnostic tool to fix the error 643.

  You receive error code 80070643 0 x or 0 x 643, code error when you use the Windows Update or Microsoft Update Web sites to install updates:
  http://support.Microsoft.com/kb/958052

  
  Kind regards
  Afzal Taher-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How can I access my emails after the death of my PC. I had a pc using Windows Vista and I served my Windows Mail e-mail program.

  Disaster of Windows Mail.  Where are my emails please?

  How can I access my emails after the death of my PC. I had a pc using Windows Vista and I served my Windows Mail e-mail program.  The computer has stopped working so I removed the hard drive, put it in a case and now use it as an external drive.  My new computer, I took possession of the Documents and Settings folder, and I'm looking for emails.  I followed the path, Documents and Settings / / AppData / Local / Microsoft / Windows Mail but there are 2 folders, backup & stationery as well as a few small files.  Where I could hide my email? Please, I beg you.

  There should be a directory called local folders under the message store and eml files organized into folders named after the directories under this directory are.  They may be hidden files, so make sure that you have enabled the display of hidden files and folders under control panel | Folder options | View.  You can also try to search *.eml, because messages are stored as eml files.  See www.oehelp.com/backup.aspx#wm for background.

  Steve

• Problem in themes after the migration of the APEX 4.0 to 4.2

  Dear friends,
  
  Recently, we migrated Apex 4.0 to 4.2. There are no errors during migration. But after the migration, we observed that any application with Simple red (topic no. 1) and Scarlet (theme 21) has stopped working properly. either model red button will not perform any task. Even changed the template of the button does not work.
  
  The one you suggest as follows to solve the problem?
  Thanks in advance.
  
  Dounibiligda

  Hi all

  I had the same problem.
  I deactivate the plugin "Save before exit" version "2.0.0", and the problem is solved.
  Used the new version 3.0 of this plugin.

  Thank you...

  Published by: Dipak R on November 30, 2012 05:13

• How to change the models of Calc Manager after the migration of HBR

  Hi all
  
  at the moment I'm trying to migrate a planning application classic migration incl. EPMA to CM business rules. Migration worked well, but I'm a model with CM and I don't like the graphic mode... Is there a way to change (HBR Macros) models in script mode? I can switch mode script for business rules, but I don't see the option if I open a Template (custom template set and after the migration of HBR).
  
  Thank you very much!
  Kind regards
  André
  
  P.S.: We are on 11.1.2.1.0

  Currently in 11.1.2.1, it is impossible to set the mode graph script. In the last 11.1.2.2 calc and patch, the default rules of planning will be migrated in order to script. In addition, the model contains a script component that will contain the macro text HBR which you should be able to change. Since the HBR was not deleted in 11.1.2.1, we will not be porting this functionality to 11.1.2.1.

  One thing you can do is to modify the model, remove all graphics components, add a script component, and paste your macro script here. If your model has parameters, you must reference them with []. For example, if the parameter has been param1, then you référenceriez it as [param1] in your macro script.

  Sree - mougel

• question: How can I open CS5.5 after the migration to the new computer laptop w / Mac OS 10.8.4?

  question: How can I open CS5.5 after the migration to the new computer laptop w / Mac OS 10.8.4? I got a dialog box indicating that I had to run Java SE runtime (or something to that effect), when I approved it, then try opening cs5.5 Indesign, the program closed unexpectedly at startup. If I uninstall program & reinstall, my documents will be free, or are they toast? Help!

  Hi rabbit Art,.

  Migration from one machine to the other problem most of the time. So I recommend you to reinstall the software. Concern is that none of your documents will be made.

  Kind regards

  Romit Sinha

• Advantage of the portfolio after the migration to HSM with Oracle 11.2.0.1.0

  Hello
  
  I found this integration for Utimaco Cryptoserver guide: http://hsm.utimaco.com/solutions/db-encryption/ and now I wonder if it is necessary to keep the original portfolio after the migration of HSM with Oracle 11.2.0.1.0. As I understand it, eventually all the necessary keys are stored in HSM. Is still used portfolio in a way or is it possible to reuse maybe after you set the METHOD to FILE sqlnet.ora?
  
  Thank you

  Hi flyer007,

  If you used the Wallet before Oracle, then migrate the master key of TDE from there to an HSM is a renewal of key operation; the keys of the table (for the TDE column encryption), and tablespace (for TDE tablespace encryption) key is decrypted with the old key in the portfolio) and encrypted again with the new MK unified (in the HSM).

  Your RMAN backup files, export files Data Pump and same 'live' in the redo logs, TEMP and UNDO tablespace can be encrypted with the old MK in the wallet, that's why we NEVER delete the portfolio.

  Of course, the Oracle database automatically knows what MK he needs.

  Good luck

  Peter

• Get the Error Message: "user profile service service has no logon. Unable to load the user profile"after you remove the Windows Vista administrator account

  Original title: deleted Vista ultima. admin identity and admin authorization password for standard users will not work.

  I inadvertently deleted the admin. identity, I think in Vista Ultima. The photo shows still on the identities, but when I try to open the identity I get the following message, "user profile service service has no logon. User profile cannot be loaded. The admin. password does not work in any of the other identities now, so I can't do updates to most of my programs, such as windows. I can't open the control panel to add and change of identity.

  Hi JBRA47,

  You can consult the following Microsoft KB article and check if it helps to solve the problem:

  Error message when you log a computer Windows Vista-based or Windows 7 by using a temporary profile: "the user profile Service has no logon. Unable to load the user profile.

  http://support.Microsoft.com/kb/947215

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• "Unable to connect to the computer error' user profile failed to connect.

  Original title: reset windows password after being locked up and he treated the new password, but I'm still locked. I don't have a password reset disk. What should I do now?

  Tour computer off standby. And when I turned it back the next morning that my password would not work. Figured out how to change the password but still getting the same message and still locked. He did deal with the new password, but just do not let me in. I don't have a password reset disk. What should I do now? Any help is greatly appreciated. I have to deal with my computer and must be able to use it as soon as possible. Thank you

  Also says "Service user profile service does not logon.

  You suffer from the dreaded problem 'user profile '. I don't have a good solution, but if you type the entire error message into a Google search box, you will get countless successes with at least some of them containing good advice.

  No one gets a Windows repair CD when buying a PC. You need to burn it yourself via the control panel / backup and restore. It only takes three minutes and having one is absolutely essential for those who wish to make their own PC maintenance.
  Talking about the essential things: a fully tested alternative admin account is one of them. Without one, you can get in diabolical trouble (the same as when not having is not a spare House key where to break a window is a radical and totally useless but effective solution).
  It might be possible to solve your current problem as follows:
  1. keep tapping F8 during the first phase of startup.

  2. select Repair from the menu.

  3. Select an administrator account, and then enter its password.

  4. When you are prompted, select System Restore.

  5. set Windows to a point well before this problem occurred. This will outline also all passwords to their old values.