Skype crashes instantly when opened

Similar Questions

• I have a Dell Inspiron 1525, I deleted all the temp, %temp% files and emptied my Recycle Bin and now no program is running, they're going to crash just when open, help me please

  I have a Dell Inspiron 1525, I deleted all the temp, %temp% files and emptied my Recycle Bin and now no program is running, they're going to crash just when open, help me please :(

  Hello

  try a restore of the system before this happened

  http://www.windowsvistauserguide.com/system_restore.htm

  If necessary do in safe mode

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• Win 7 HP crashes instantly when any application running, showing me various error messages.

  I have a computer dell laptop with win7 64 bit started H.P. constantly crashing after a few minutes of use. When I open an application, any application, it crashes instantly, for many reasons.

  Examples: explorer.exe breaks down with the warning "EXPLORERFRAME.dll missing '; '. a blue screen followed by display black screen "PXE - MOF, outgoing PXE ROM" and many error messages e/s. After all accident, I can turn it back on and it starts normally, but crashes again in the same way after everything is loaded.
  My laptop is a few months old, never had no damage and works smoothly without any problems. The presence of only notable is that this problem started to happen just after the expiration of my Norton internet security. Another important fact is that when I press F12 on Dell logo screen and it takes me to the boot options, I run a diagnosis which stops at 20%, one says there is no hard drive, but after I manually turn off and turn it on again it loads normally only crashing again after a few minutes of normal use or by using any application.
  I reinstalled NIS2012 and run a check complete, I used ccleaner to check the registry and chckdsk on cmd and nothing appeared. I wasn't able to run Dell pc-check, because the blue screen crash happens.
  I take dell as soon as POSSIBLE, but for now I'm travelling and I need to do a job with it, so any help is very appreciated. (I'm typing this on the laptop of a friend, as I said, mine hangs when using ANY program)

  I tried to collect the information, but there was an error in time-out with performance monitor report.

  I was trying to deal with it, I contacted Dell, the diagnosis of boot worked and he showed a problem with my HARD drive. Fortunately, he was still guaranteed so that they reaplacing the HARD drive in a few days.
  Thank you for your help.

• InDesign crashes repeatedly when opening

  So my InDesign crashes whenever I open it, even when I start. It keeps giving me the error starts like this:

  Exception type: EXC_BAD_ACCESS (SIGSEGV)

  Exception codes: KERN_INVALID_ADDRESS at 0x000000000000002c

  Please, someone help! I tried to delete the Configuration file, but it gives me the same error message.

  See SING Removal

• Skype crashes instantly at startup

  Launch of Skype, Skype has stopped working:

  Signature of the problem:
  Problem event name: APPCRASH
  Application name: Skype.exe
  Application version: 6.18.0.105
  Application timestamp: 53b3f36a
  Fault Module name: Dx11Interceptor.dll
  Fault Module Version: 0.0.0.0
  Timestamp of Module error: 4ebab2d2
  Exception code: c0000005
  Exception offset: 00003e92
  OS version: 6.1.7601.2.1.0.256.1
  Locale ID: 1033
  Additional information 1: 897f
  More information 2: 897fed3325375548e02b4adfe1311443
  Additional information 3: b595
  Additional information 4: b5952f6a18297f0a8e087a9373ffeffa

  The DxDiag is attached for more information.

  Thank you very much!

  Skype crashed on the Dx11Interceptor.dll module, which most likely belongs to amBX Gaming Software FXGen. Try to uninstall this software.

• CC Adobe applications crash repeatedly when opening

  Hello

  I've looked through a number of discussions and am not having much luck to find a solution that works. I try to install CC for teams with over a dozen apps on 3 desktops to remote users. Apps install without problem but I am facing some problems when they try to open with their user accounts. At present the main perpetrator of the offence is InDesign. Illustrator and Photoshop have done this as well. They block when they are open and have progressed through the loading screen.

  The slightest error module: MSVCR110.dll

  Code: c00000fd

  To track down this bug that I have:

  Ensured that all filepaths are open to users (none have administrator rights)

  Add all URLS to the proxy adobe list exclusion

  Made sure that all software support (C++, etc.) has been installed and updated

  Removed "automatically detect settings" in the internet and entered manually options our proxy details.

  Still no joy, InDesign keeps crashing. Is there something I missed? Has anyone met and managed to overcome this problem?

  It's a little frustrating until 2015, it is software that is awkward this regarding the proxy settings...

  Thanks for any advice.

  Well, shortly after this announcement and hit my head on a desk a few times I went and tried to sign as an admin user. That the user was logged to the console CC so InDesign detected a user admin login I have returned as the user breaking and open creative cloud of the system tray app (sorry, I forgot to mention this is a Windows 7 x 64 machine). It was not connected. So I logged on here and now other apps CC started working. I can now browse the menu help and select "connect".

  I would like to ask Adobe, there must be a more user-friendly way to ask for a connection to the user that all belligerent crash the program? This seems to be a major bug for me. Yes, it is easily fixable, but I lost a good amount of time trying to find a vague exception code when it was just a simple matter of a user login...

• Mail crashes immediately when opened

  Mail on iPhone 6 and iPad opens for 1 second, then quits? But Mail on iMac still works fine.

  Try resetting your e-mail account. First close your Mail application completely from the window of the selector app by double clicking the Home button and drag the email preview pane up until it disappears from the display. You may need to search the mail pane covering scribbles to the left. Then go to settings > Mail, Contacts, calendar > find your e-mail provider and click on the account. On the next page, delete the account. Then perform a forced reboot. Hold down the home and Sleep/Wake buttons simultaneously for about 15-20 seconds , until the Apple logo appears. Then go to settings > mail... and to add the account.

• AE crashes instantly when importing PSD as a model.

  I tried EVERYTHING (the layer styles rasterize and fonts, keep the size of the layer or not)

  nothing works

  don't know if it works for everyone, but remove autodesk link compositor plug fixed it for me.  If anything, copy all your third-party plugins, to a new folder that is remove and see if that solves it.  If so, add them in one at a time to see which plugin is it.

• Skype crashing on startup (Skype has stopped working)

  Been using Skype for almost 3 years with no problems, but since yesterday, Skype crashes instantly when I log into my account. I tried reseting Skype, uninstall and reinstall, update my nvidia drivers and nothing has worked so far. Any help/solution is much appreciated.

  Administrative activities:

  Name of the failing application: Skype.exe, version: 7.8.64.102, time stamp: 0x55c4ffdc
  Name of the failed module: KERNELBASE.dll, version: 6.1.7601.18869, time stamp: 0x556363bc
  Exception code: 0xe06d7363
  Offset: 0x0000c42d
  ID of the process failed: 0x34d0
  Start time of application vulnerabilities: 0x01d0d6a8371403e0
  The failing application path: C:\Program Files (x86)\Skype\Phone\Skype.exe
  Path of the failing module: C:\Windows\syswow64\KERNELBASE.dll
  Report ID: 7b49b028-429b-11e5-9b62-50e549b16bc2

  In all previous cases with error message say,.

  Exception code: 0xe06d7363

  Offset: 0x0000c42d

  It's a Gigabyte card mother and BIOS Award Modular v6.00PG.

  http://community.Skype.com/T5/Windows-desktop-client/Skype-7-7-crashing-right-away/m-p/4077623#M3612...

  This is exactly the case with your computer.

  However, in your case the DxDiag also crashed on DirectShow.

  DxDiag previously: crashed in information system (stage 4) and DirectShow (step 1). Re-run DxDiag with the command line parameter 'dontskip' or choose to not to ignore when you are prompted to collect information could result in DxDiag getting this information

  I don't know, but this could be caused by, the refresh rate of your monitor is set to 144 Hz, while native mode is 60 Hz. try changing the native 60 Hz refresh rate.

• Hi, I installed an Alfred Workflow (see code below) that will mark all my mails as read. After you run it for a minute, the mail has crashed and I had to forcequit. However, now, when you open the Mail it crashes instantly, even after restart and repair o

  Hello

  I installed an Alfred Workflow (see code below) that will mark all my mails as read. After you run it for a minute, the mail has crashed and I had to forcequit. However, now, when you open the Mail it crashes instantly, even after restart and repair the permissions. I also used the Ctrl + C and CTRL-Z commands in the Terminal to leave the alfred_script, but nothing helped. I'm running out of ideas here, so I hope you could help me either reinstall the mail.app. I could always just switch to a different mail application, but it's kind of a last resort.

  Code:

  Tell application "Mail".

  Define allAccounts on each account name

  Repeat with currAccount in allAccounts

  the unreadMboxes value (each mailbox to the account currAccount the unread number is not 0)

  Repeat with currMbox in unreadMboxes

  (read status of each message to currMbox including the playback State is set to false) true value

  end repeat

  end repeat

  tell the end

  Any input would be greatly appreciated. Can post the report of crash on demand.

  Not sure that Alfred's, but it's just an Applescript script and it would not cause Mail to be planted.

  However, when running through all the messages, it is possible Mail database has been corrupted and it crashes because of this.

  I'll probably get anything out of the accident report, but others might.

  My first instinct would be to rebuild the mailbox. Because you can't do that with him crashing, you can simply delete the databases and it will rebuild them.

  Navigate to this folder:

  ~/Library/Mail/v3/MailData/

  You can either manually through the files, or copy the full path and paste it into go the folder in the menu go to the Finder.

  Remove the envelope Index files. Open Mail and see if it works well.

  If your library does not appear in your folder, hold down the Option key and select library in the menu go to in the Finder.

• Skype crashes when opening of cat

  Okay, so. I updated my computer, and when I turned on Skype; I continued to get crash reports on it for example "Skype has stopped working, click here to close. Skype crashes when I opened discussions to send/reply to all the messages that I did.

  So far, I have:

  -Update of Skype

  -Uninstalled Skype

  I use a Toshiba Satillite running Windows 8.

  I checked the error reports and this is what he came;

  Name of the failing application: Skype.exe, version: 6.16.0.105, time stamp: 0x536b4342
  The failed module name: ntdll.dll, version: 6.2.9200.16912, time stamp: 0x53645e25
  Exception code: 0xc0000005
  Offset: 0x000593d4
  ID of the process failed: 0 x 1278
  Start time of application vulnerabilities: 0x01cfb799673b286a
  The failing application path: C:\Program Files (x86)\Skype\Phone\Skype.exe
  The failed module path: C:\windows\SYSTEM32\ntdll.dll
  Report ID: bec6a6cb-238c-11e4-befc-7054d27a6c89
  Faulting full name of the package:
  ID of the failed package-parent application:

  Also, please update your Windows 8 8.1, you can do so by opening the app Store and selecting "Update to Windows 8.1 free".

• 7.13 Skype crashes when I open it!

  Please, help me. My Skype crashes when I open it. It falls a GUI where it says, that my Skype has stopped working. I tried to reinstall my Skype, restart the computer, even reinstalling my drivers, still does not properly. And it's true, I tried to update Skype latest version and by the way, my Skype updates automatically

  Open this folder, delete the Flash.ocx file and then try to download the latest version of Flash Player from the Adobe site.

  C:\Windows\SysWow64\Macromed\Flash\

• Skype crashing when opening a cat.

  Hi all

  I had a problem the last two days where Skype crashes a few seconds after I opened a conversation with someone. I tried to reinstall, reboot, delete shared.xml or the config in my user %appdata%\skype as folder file has been suggested to me by live support, but without help. I also tried to delete my registry, ending all transfers in Skype and turning off all the stories of cat. None of which work. There is also no error, it seems fair that "Not responding" then asks me if I want to shut it down, wait that it reacts or look online for a solution.

  The only time where he has worked in the last day or so although I was remote accessible for a person to Skype. Then, the problem doesn't happen at all, and Skype has worked for a bit, but after some time, the problem returns.

  Someone at - it any other ideas? I use Skype every day and be limited to my tablet is a pain.

  It seems that the Compact view is indeed a work around for this issue and hope that Skype move to find a real solution for it soon.
  
  For your information:
  Automatic Updates - OFF

  Updates Windows - completely updated (apart from Bing Bar of the course... * beep * it's...)
  
  Full Skype blocking/crash to scrollbar on contacts, send messages, from calls or by clicking on a contact.

  Version of Skype: 6.16.0.105

• Skype crashes when selecting talk IM

  My Skype crashes as soon as I open it to see new IM. It started a week ago and accidents are not so frequent (about 2 per day). But now it crashes almost instantly when I opened the IM tabs. I tried to reinstall own Skype, even a couple of older versios, so I begin to suspect that there is something wrong with my machine. Add the log file and DirectX diagnostics.

  Open this link with your Internet Explorer. You see, what version of Flash Player installed?

  http://www.Adobe.com/UK/software/Flash/about/

• Skype crashes when the sponsor or to join a call

  I use the latest version of Skype. I can still talk to people by however when I join a call or answer a call my Skype crashes of Instant Messaging. I have the latest updates of windows and using the latest version of Skype.

  I am running windows 7.

  Thank you.

  You probably Evaer Skype recorder installed. This application puts a bad version of the module d3d9.dll in the Skype application folder.

  Uninstall Evaer. If it still won't solve the problem, remove the defective d3d9.dll file in this folder:

  C:\Program Files (x 86) \Skype\Phone\d3d9.dll