AE crashes instantly when importing PSD as a model.

Similar Questions

• Win 7 HP crashes instantly when any application running, showing me various error messages.

  I have a computer dell laptop with win7 64 bit started H.P. constantly crashing after a few minutes of use. When I open an application, any application, it crashes instantly, for many reasons.

  Examples: explorer.exe breaks down with the warning "EXPLORERFRAME.dll missing '; '. a blue screen followed by display black screen "PXE - MOF, outgoing PXE ROM" and many error messages e/s. After all accident, I can turn it back on and it starts normally, but crashes again in the same way after everything is loaded.
  My laptop is a few months old, never had no damage and works smoothly without any problems. The presence of only notable is that this problem started to happen just after the expiration of my Norton internet security. Another important fact is that when I press F12 on Dell logo screen and it takes me to the boot options, I run a diagnosis which stops at 20%, one says there is no hard drive, but after I manually turn off and turn it on again it loads normally only crashing again after a few minutes of normal use or by using any application.
  I reinstalled NIS2012 and run a check complete, I used ccleaner to check the registry and chckdsk on cmd and nothing appeared. I wasn't able to run Dell pc-check, because the blue screen crash happens.
  I take dell as soon as POSSIBLE, but for now I'm travelling and I need to do a job with it, so any help is very appreciated. (I'm typing this on the laptop of a friend, as I said, mine hangs when using ANY program)

  I tried to collect the information, but there was an error in time-out with performance monitor report.

  I was trying to deal with it, I contacted Dell, the diagnosis of boot worked and he showed a problem with my HARD drive. Fortunately, he was still guaranteed so that they reaplacing the HARD drive in a few days.
  Thank you for your help.

• Why do I get error when importing psd photo

  What I try to do is the following. I created an image in Illustrator. Then saved in jpeg format, then put in photo shop, cutting the area enclosing white and saved as a PSD file. Then I went in first pro and I tried to open it and get the error message. The message says "the importer reported a generic error. What can I do?

  Photos must be RGB no CMYK http://forums.adobe.com/thread/1081681 - what is your image?

• Skype crashes instantly when opened

  I am trying to correct certain defects of an elderly woman, try to use Skype, recently Interent Explorer has stopped working and wouldn't install firefox, but I got his chrome, easy solution... now Ive tried to get its Skype to work for 3 weeks, I did so that is not in compatibility mode, I uninstalled and reinstalled , I've updated everything, even go and delete a folder in the program folder files from causes, any advice would be nice right now

  If Internet Explorer does not work, then this will be the case with Skype. Skype relies on Internet Explorer.

  What exactly is the version of Internet Explorer installed on this computer?

• get error message when importing PSD in Premiere Pro... dunno what Miss me...

  Any help is appreciated...

  Photo must be RGB no CMYK http://forums.adobe.com/thread/1081681

• Mail crashes when importing MBOX files

  Mail crashes instantly when I select a MBOX file to be imported. In the brief moment before crashing it creates a folder to import and an MBOX, but the MBOX is empty.

  


  A few days ago I had a MBOX to import. It appears in the Library/Mail/V3/boxes to the letters/folder, then the MBOX container keeps messages from work. However, this MBOX does not appear in the sidebar.

  I went to a backup clone made shortly after the installation of El Capitan. I have replaced Mail and every file relating to mail that was in my user library. This leads to crashes instantly every time instead of intermittent partially blocks by an import.

  I made a secure boot boot. The problem remains.

  Reason 49 on why it is wrong to let the snow leopard. I wouldn't have moved to the Mail except that Outlook 2011 cannot search for emails or run unread simple as filters. (Recommendation from Microsoft is to buy Office 2016).

  Any ideas on how to fix the post other than to reinstall El Capitan?

  I have more information. I started in Snow Leopard and opened Mail 4.6. He had no problem importing the files MBOX to Outlook emails and attachments. I started to El Capitan. I deleted the folder/Library/Mail. I launched Mail 9.2. He created a new folder/Library/Mail that had obviously, no emails. I imported into the Mail 4.6 Mail folder. Everything imported perfectly. Yay! I then tested the capacity of 9.2 mail to import a MBOX to Outlook-created file small. Immediate crash.

  I hope that the problem was that Outlook 2011 on El Capitan generates corrupt MBOX files, but appears not to be the case. They looked good in BBEdit. Outlook had no difficulty to import.

• Hi, I installed an Alfred Workflow (see code below) that will mark all my mails as read. After you run it for a minute, the mail has crashed and I had to forcequit. However, now, when you open the Mail it crashes instantly, even after restart and repair o

  Hello

  I installed an Alfred Workflow (see code below) that will mark all my mails as read. After you run it for a minute, the mail has crashed and I had to forcequit. However, now, when you open the Mail it crashes instantly, even after restart and repair the permissions. I also used the Ctrl + C and CTRL-Z commands in the Terminal to leave the alfred_script, but nothing helped. I'm running out of ideas here, so I hope you could help me either reinstall the mail.app. I could always just switch to a different mail application, but it's kind of a last resort.

  Code:

  Tell application "Mail".

  Define allAccounts on each account name

  Repeat with currAccount in allAccounts

  the unreadMboxes value (each mailbox to the account currAccount the unread number is not 0)

  Repeat with currMbox in unreadMboxes

  (read status of each message to currMbox including the playback State is set to false) true value

  end repeat

  end repeat

  tell the end

  Any input would be greatly appreciated. Can post the report of crash on demand.

  Not sure that Alfred's, but it's just an Applescript script and it would not cause Mail to be planted.

  However, when running through all the messages, it is possible Mail database has been corrupted and it crashes because of this.

  I'll probably get anything out of the accident report, but others might.

  My first instinct would be to rebuild the mailbox. Because you can't do that with him crashing, you can simply delete the databases and it will rebuild them.

  Navigate to this folder:

  ~/Library/Mail/v3/MailData/

  You can either manually through the files, or copy the full path and paste it into go the folder in the menu go to the Finder.

  Remove the envelope Index files. Open Mail and see if it works well.

  If your library does not appear in your folder, hold down the Option key and select library in the menu go to in the Finder.

• Lightroom crashes when importing, iPhone a trigger

  The latest version of Lightroom CC, 2015.2.1, continues to be unstable, crashing constantly, taking usually Windows desktop down with it requiring a reboot of the entire system.

  The import module and its new GUI seems to be a trigger for this behavior. By clicking import, sometimes LR crashes immediately without displaying the import screen, sometimes he half-displays the screen to import as a transparency on the normal screen then freezes and sometimes the import screen becomes fully visible but then more often as otherwise LR and the crash even when Windows desktop.

  Although this behavior may happen at any time, try to import photos from an iPhone ensures a fatal full system shutdown.

  2015 Lightroom versions have all been more unstable than previous versions. These problems seem to be centered around video issues. I have an AMD Radeon graphics card and had to rollback repeatedly last year drivers (as well as uncheck LR graphics options) for LR to work. And each new version of LR seems to require to start from scratch to get the program, the operating system and graphics card all talk to each other. This time, they're not talking.

  Adobe, what do you think? Similar problems are reported on the net.

  Any help with this mess is greatly appreciated.

  Ed

  Windows 7/64

  Reference Dell i7 12 GB of RAM

  RadeonHD AMD 6450

  iPhone running iOS 9.1 6s

  Hi ejbSFO

  Greetings!

  Although this behavior may happen at any time, try to import photos from an iPhone ensures a fatal full system shutdown.

  If the accident is specific to the iPhone, it is because Lightroom performs an analysis of all the devices where the pictures would be. He has the problem where it cannot correctly identify a smartphone as a "hard disk". So, if you set your iPhone to connect as a support MTP device. The question could not arise.

  2015 Lightroom versions were more unstable than previous versions

  You can restore the version 2015.1.1. Refer to restore an earlier version of update

  Concerning

  Assani

• Anyone who has a problem with the system crashes when importing using the new interface to import

  Anyone who has a problem with the system crashes when importing using the new interface to import

  Can specify you what Adobe program you use so that we do that your post is in the right forum?

• LR 5 crashes when importing

  I have a new win 7, LR 5.7. Loads very well and I have successfully imported 1 time. Now it crashes when importing. I uninstalled and reinstalled LR and it imported 1 times successfully and againf now it will not matter a second time. Help, please.

  Error codes:

  Signature of the problem:

  Problem event name: APPCRASH

  Application name: lightroom.exe

  Application version: 5.7.1.10

  Application timestamp: 547e35e8

  Fault Module name: wpdmanager.mox

  Fault Module Version: 0.0.0.0

  Timestamp of Module error: 48a324a9

  Exception code: c0000005

  Exception offset: 000000000001f885

  OS version: 6.1.7601.2.1.0.256.48

  Locale ID: 1033

  Information additional 1: 3A 95

  More information 2: 3a95dbaa5d5dcf7b9bc4dca71058dc3f

  3 more information: 0e04

  Additional information 4: 0e04d756f8574f43dd4e96ab3d74614f

  Problem solved: I got my Tablet connected load and seemingly effect LR.

• Updated October 2014 CC causes crash when importing OBJ.

  I tried to import a file (created in c4dr16, registered as a .obj file) OBJ AE CC 2014 to be used with Trapcode Form plugin. without fail, it causes AE crash when importing.

  I tried going through the menu import by dragging the file into the prj with the same results - crash.

  Connection to all media via the network of servers uptairs.

  Black trash

  OS 10.9.4

  is it me?

  

  You will need to take up with the red giant / Trapcode. That being said, C4D outputs simply crappy OBJ files. Download Blender, open your file in there and export it again as an OBJ file much better.

  Mylenium

• CS5.5 / Win: Indesign crashes when importing an rtf file

  Hello

  My plugin crashes when importing an rtf file. Most rtf work very well, but it's not OK. If I try to import Indesign crash. Also if I try to manually place in Indesign.

  I think that something is wrong in the rtf, but I can open it in Word.

  Any ideas what to do?

  Can I perform a check in advace?

  By the way: I can't save my RTF presets in Indesign. No idea why?

  Thank you

  Hans

  Hello

  It does not work without my plugin. InDesign crashes also without it, if I placed the RTF manually.

  In the meantime, I found a sequence in my RTF which is the cause of the accident. I fixed that manually, and after that I could import the RTF. It seems that it is a problem of the RTF import filter.

  The uncorrected RTF was imported to Indesign CS3, after that it crashes (CS4, CS5, CS5.5).

  Thank you

  Kind regards

  Hans

• Lightroom CC 2015.3 crashes when importing

  Since I've upgraded to version 2015.3, I can import is more photos.  I tried to import from SD card and a hard drive, but both show the same failure.

  I am running Windows 7.

  First of all, when I start the import process, the display of the grid does not display previews of new photos.  If I double-click on a photo, he will show me the preview in full screen.  It shows previews of older photos I've already imported.  But in the grid, the new photos are all white.

  Then, I select copyand allow to Rename the files as I always do.  When I click on the import button, I get the screen of importation, that says "import...". "The status bar in the top left says" copy and import photos ", and the progress bar starts about 2/3 full.  It remains there, but no matter how long wait.  Occasionally, I get a handful of imported photos, but most of the time, no pictures are imported.

  When I give up and click on the X to cancel, a popup says, "no photos or videos not found to import.

  I also supported my catalog, thinking that the optimization step might help.  But it did not help.

  I also tried to import into a new catalog, but that did not help.

  To hang when importing - Lightroom Forums, I found:

  Hi, I encountered the same problem with LR 6.3 autonomous and it fixed when I connected in Adobe Creative cloud before running Lightroom.

  I started the creative application of Cloud, and I was not signed in.  I registered, and the import was successful.

  So I think that was the problem: I was not connected to the cloud to create, at least as far as the cloud app was concerned.

• Built app crashes instantly

  I am building an application in Labview 2010 Professional (upgrade to the latest patch, f4)

  The application is built successfully, but when I run my application built, it crashes instantly (on the same computer, I built it on) declaration of an accident in lvrt.dll

  I tried leaving the parts of the code that accesses the dll files, but that did not help. I'm not able to use remote debugging, because it crashes instantly.

  First of all, I was able to build and run the application on my development machine, but not run it on the deployment computer. Later, I wasn't able to run on the development computer, either, I haven't had huge changes in the code so I don't know what the difference is.

  Now I'm building on a new installation of Labview professional 2010 on the deployment computer and cannot run it on computers. I use a few screws G opened, installed through VIPM, nothing too special.

  How can I continue my troubleshooting, anoyone has suggestions?

  When you build, you might try setting screws that run during initialization to open their facades when it is called. That would tell you if the accident occurs before the beginning of your code, or to what extent the code actually gets before exploding. You can extend what you already have by throwing disable structures around things to disable everything except the logical database structure (machine, handler, regardless of the State...)? He demand in one piece or are there processes that run in the background?

  Mike...

• Windows Vista stops working in iTunes as soon as he plays the first track when importing from CD (APPCRASH). Help!

  Windows Vista has stopped working error back in iTunes as soon as it reads in the first track when importing CD and must close the program (APPCRASH). I uninstalled and reinstalled a newer version of iTunes (currently empty) several times. Also, ran the CD diagnostics in iTunes and seems OK. I'm on Vista Home Premium Edition. If it helps, I saved the CD Diagnostics in ITunes and the Windows APPCRASH info. I spend several hours of research and try to understand it. Any ideas?

  Thank you for your response. I actually solved this suddenly. I've had my laptop plugged into a port replicator to access devices. I decided to try to unplug, restart and try again. It worked! Do not know why the replicator program caused crash but it seems to work...