SL510 crashed in the middle of the upgrade of the BIOS.

Similar Questions

• Equium A60 Notebook failure during the update of the BIOS

  Hello
  My computer crashed during the BIOS update recommended to treat the blue screen error message. I have turned it off completely and now it won't start at all. No lights turn on or it's like there is no power getting to the machine. My outlet does work as I have tested. This could mean my battery is dead? I tried to remove and clean the contacts or the update of the BIOS had something to do with it?

  Thank you
  Phil

  Hi, Phil the A60 sometimes fails started well only very rarely that incidentally that happened to me once. To solve this problem requires the removal and re-sitting of the battery pack. However, in your case, it sounds very likely the BIOS update has failed unfortunately is a return trip to Toshiba.

  Richard S.

• MacBook air crashes after the release of sleep since the upgrade of the sierra

  Began to notice that since I upgraded my macbook air 2015 to sierra, system crashes. The trigger is always when I wake the sleep system (whether it is by opening cover or press a key). Issue is intermittent and may not be reproduced every time. I contacted apple support and they recommended resetting the SMC (ctrl + shift + cmd) but that didn't help either. I also did a check of filesystem (fsck-fy) and which seems to be very well so.

  I noticed others seem to be faced with similar problems and a common theme that I noticed was that both we seem to have an installed tardisk. Not sure if this could be a factor?

  While it is not any loss of data, the question is certainly annoying and disruptive to work.

  The same question was observed at about 7 times since the update of the sierra. Containing the report of Etrecheck to the breast

  #	Date and time
  1	Kills Sep 28 10:03:09 2016
  2	Kills Sep 28 18:13:50 2016
  3	Fri 30 Sep 11:49:16 2016
  4	1 Oct 01:05:15 Sam 2016
  5	Mon 3 Oct 08:05:42 2016
  6	Mar 4 14:26:03 Oct 2016
  7	Sea 5 Oct 11:19:17 2016

  Sea 5 Oct 11:19:17 2016

  Panic report *.

  panic (the appellant 2 0xffffff8004f7316e cpu): initproc is out - output namespace 2 subcode 0xa description reason: no

  News of the UUID:

  0 x 101425000 uuid = < a525eaea-af86-30c2-b360-3d093b4f0828 >

  0 x 100713000 uuid = < 268e1319-a81e-384a-9303-67c26873038a >

  Thread 3 crashed

  RAX: 0 X 0000000000002210, RBX: 0X00007FFFE358C314 RCX: 0X0000700000F06BDB RDX: 0X000000010075DD1E

  RER: 0X0000700000F06B30, RBP: 0X0000700000F06B70, IHR: 0X000000010075C698, RDI: 0X0000700000F06BDC

  R8: 0X0000700000F06BD0, R9: 0X0000700000F06BCC, R10: 0 X 0000000004001080, R11: 0 X 0000000100756188

  R12: 0X000000010075E8A8, R13: 0X0000700000F06BCC, R14: 0X0000700000F06BDC R15: 0X000000010075C698

  RFL: 0 X 0000000000010283, RIP: 0X000000010143B605, CS: 0X000000000000002B, SS: 0 X 0000000000000023

  Thread 0: 0xffffff80108dcdc8

  0x00007fffe36b7456

  Could not read the context 0x0000700000e01cd8 LR

  Thread 1: 0xffffff80108e1748

  0x00007fffe36bf27e

  0x00007fffe3568337

  0 x 0000000000000000

  Thread 2: 0xffffff801558e6f8

  0x00007fffe37a6214

  3 wire: 0xffffff80159b8028

  0x000000010143b605

  0x0000000101441c7e

  0x00000001014297ad

  0x00007fffe358c48e

  0 x 0000000100756188

  0x00000001007265f3

  0x0000000100725ef8

  0x00000001007291cb

  0x00007fffe355a128

  0x00007fffe356fc10

  0x00007fffe3565ad2

  0x00007fffe355c966

  0x00007fffe35709d2

  0x00007fffe3562d41

  0x00007fffe35713bf

  0x00007fffe35741b0

  0x00007fffe37a661f

  0x00007fffe37a6221

  0 x 0000000042000000

  Thread 4: 0xffffff80151f4260

  0x00007fffe36bf4e6

  0x00007fffe37a6221

  0 x 0000000000000000

  Wire 5: 0xffffff8015c45e18

  0x00007fffe37a6214

  Mac OS version: 16A 323

  Kernel version: kernel Darwin in Version 16.0.0: Mon Aug 29 17:56:20 PDT 2016; root:XNU-3789.1.32~3/RELEASE_X86_64

  Kernel UUID: 622D2470-C34D-31F9-A62B-6AA9A3C6A3CD

  Name of system model: MacBookAir7, 2 (Mac-937CB26E2E02BB01)

  ******************************************************************************** *******************************************************

  Mar 4 14:26:03 Oct 2016

  Panic report *.

  panic (cpu 1 0xffffff801817316e appellant): initproc is out - output namespace 2 subcode 0xa description reason: no

  News of the UUID:

  0x1065e4000 uuid = < a525eaea-af86-30c2-b360-3d093b4f0828 >

  0x1055df000 uuid = < 268e1319-a81e-384a-9303-67c26873038a >

  Thread 3 crashed

  RAX: 0 X 0000000000000000, RBX: 0000000000000078 RCX 0 X: 0 X 0000000000000000, RDX: 0X000000000000007D

  RER: 0X00007000061AC868, RBP: 0X00007000061ACCD0, IHR: 0X00007FDF61717C40, RDI: 0X00007000061AC888

  R8: 0 X 0000000000000040, R9: 0X00007FFFE56873D0, R10: 0XFFFFFFFFFFFFFFFF, R11: 0 X 0000000000012068

  R12: 0X00007FFFE5688148, R13: 0X00007FDF6160FAB4, R14: 0X00007000061ACCF0 R15: 0X00007FDF6160FAA0

  RFL: 0 X 0000000000010206, RIP: 0X00007FFFDB52C00E, CS: 0X000000000000002B, SS: 0 X 0000000000000023

  Thread 0: 0xffffff8023eb2be0

  0x00007fffdcad2456

  Could not read the context 0x0000700005fa0cd8 LR

  Thread 1: 0xffffff8023eae260

  0x00007fffdcada27e

  0x00007fffdc983337

  0 x 0000000000000000

  Thread 2: 0xffffff802669e498

  0x00007fffdcada4e6

  0x00007fffdcbc1221

  0 x 0000000042000000

  3 wire: 0xffffff8027112260

  0x00007fffdb52c00e

  0x000000010561051d

  0x00007fffdc975128

  0x00007fffdc98ac10

  0x00007fffdc980ad2

  0x00007fffdc977966

  0x00007fffdc976ee0

  0x00007fffdc976cb7

  0x00007fffdcbc1746

  0x00007fffdcbc1221

  0 x 0000000000000000

  Thread 4: 0xffffff802538d510

  0x00007fffdcbc1214

  Wire 5: 0xffffff802538abb8

  0x00007fffdcbc1214

  Mac OS version: 16A 323

  Kernel version: kernel Darwin in Version 16.0.0: Mon Aug 29 17:56:20 PDT 2016; root:XNU-3789.1.32~3/RELEASE_X86_64

  Kernel UUID: 622D2470-C34D-31F9-A62B-6AA9A3C6A3CD

  Name of system model: MacBookAir7, 2 (Mac-937CB26E2E02BB01)

  ******************************************************************************** *******

  Report Etrecheck

  EtreCheck version: 3.0.6 (315)

  Report generated 2016-10-05 18:58:11

  Download EtreCheck from https://etrecheck.com

  Time 02:31

  Performance: Excellent

  Click the [Support] links to help with non-Apple products.

  Click [details] for more information on this line.

  Problem: Computer restarts

  Description:

  System of maintains restart with an error "panic (appellant 2 0xffffff8004f7316e cpu)": initproc is out - output namespace 2 subcode 0xa description reason: no ".

  Hardware Information: ⓘ

  MacBook Air (13 inch, early 2015)

  [Data sheet] - [User Guide] - [warranty & Service]

  MacBook Air - model: MacBookAir7, 2

  1 processor 1.6 GHz Intel Core i5: 2 strands

  4 GB RAM not extensible

  BANK 0/DIMM0

  OK 2 GB DDR3 1600 MHz

  BANK 1/DIMM0

  OK 2 GB DDR3 1600 MHz

  Bluetooth: Good - transfer/Airdrop2 taken in charge

  Wireless: en0: 802.11 a/b/g/n/ac

  Battery: Health = Normal - Cycle count = 76

  Video information: ⓘ

  Intel HD 6000 graphics card

  Color LCD 1440 x 900

  Software: ⓘ

  macOS Sierra 10.12 (A 16, 323) - since the starting time: 6 hours

  Disc information: ⓘ

  SM0256G SSD APPLE disk0: (251 GB) (Solid State - TRIM: Yes)

  EFI (disk0s1) < not mounted >: 210 MB

  Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB

  Mac 500 GB internal (disk2) / [Startup]: 505,01 (Go 343,25 free)

  Encrypted AES - XTS unlocked

  Storage of carrots: disk0s2 250.14 GB Online

  Storage of carrots: disk1s2 255,52 GB Online

  USB information: ⓘ

  Card reader Apple

  Apple Inc. BRCM20702 hub.

  Apple Inc. Bluetooth USB host controller.

  Lightning information: ⓘ

  Apple Inc. Thunderbolt_bus.

  Guardian: ⓘ

  Mac App Store and identified developers

  Unknown files: ⓘ

  ~/Library/LaunchAgents/com.example.restart.plist

  sh - c ~/Desktop/TarDiskPear.app/Contents/MacOS/TarDiskPear

  A unknown file found. [Check files]

  Kernel extensions: ⓘ

  /Applications/Kies.app

  com.devguru.driver.SamsungACMControl [no charge] (1.4.31 - 10.6 SDK - 2016-03-01) [Support]

  com.devguru.driver.SamsungACMData [no charge] (1.4.31 - 10.6 SDK - 2016-03-01) [Support]

  com.devguru.driver.SamsungComposite [no charge] (1.4.31 - 10.6 SDK - 2016-03-01) [Support]

  com.devguru.driver.SamsungMTP [no charge] (1.4.31 - SDK 10.5 - 2016-03-01) [Support]

  com.devguru.driver.SamsungSerial [no charge] (1.4.31 - 10.6 SDK - 2016-03-01) [Support]

  / Applications/Parallels Desktop.app

  com.parallels.kext.hypervisor [no charge] (11.2.0). 32581 - SDK 10.9-2016-07-24) [Support]

  com.parallels.kext.NetBridge [no charge] (11.2.0). 32581 - SDK 10.9-2016-07-24) [Support]

  com.parallels.kext.usbconnect [no charge] (11.2.0). 32581 - SDK 10.9-2016-07-24) [Support]

  com.parallels.kext.vnic [no charge] (11.2.0). 32581 - SDK 10.9-2016-07-24) [Support]

  / Library/Application Support/org.pqrs/Karabiner

  [loading] org.pqrs.driver.Karabiner (10.20.0 - 10.11 SDK - 2016-06-19) [Support]

  Launch system officers: ⓘ

  [no charge] 7 tasks Apple

  [loading] Apple 168 jobs

  tasks of Apple 96 [performance]

  Launch system demons: ⓘ

  [no charge] 40 Apple jobs

  [loading] 158 jobs Apple

  Apple tasks 105 [performance]

  Launch officers: ⓘ

  [loaded] com.adobe.AAM.Updater - 1.0.plist (2016-07-15) [Support]

  [cannot] com.adobe.ARMDCHelper.cc24aef4a1b90ed56a725c38014c95072f92651fb65e1bf9c8e43c37a2 3d420d.plist (2016-07-13) [Support]

  [loading] com.google.keystone.agent.plist (2016-08-02) [Support]

  [loading] com.oracle.java.Java - Updater.plist (2015-12-25) [Support]

  Launch demons: ⓘ

  [loading] com.adobe.ARMDC.Communicator.plist (2016-07-13) [Support]

  [loading] com.adobe.ARMDC.SMJobBlessHelper.plist (2016-07-13) [Support]

  [loading] com.google.keystone.daemon.plist (2016-09-02) [Support]

  [loading] com.malwarebytes.HelperTool.plist (2016-09-15) [Support]

  [loading] com.microsoft.autoupdate.helpertool.plist (2016-08-03) [Support]

  [loading] com.microsoft.office.licensingV2.helper.plist (2016-04-11) [Support]

  com.Nalpeiron.NetPro.plist [running] (2016-04-30) [Support]

  [loading] com.oracle.java.Helper - Tool.plist (2015-12-25) [Support]

  [loaded] org.pqrs.Karabiner.load.plist (2016-06-15) [Support]

  [loading] org.wireshark.ChmodBPF.plist (2016-07-15) [Support]

  User launch officers: ⓘ

  [loading] com.bittorrent.uTorrent.plist (2015-12-26)

  [cannot] com.example.restart.plist (2016-07-20)

  Items in user login: ⓘ

  iTunesHelper Application (/ Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)

  Agent application of file transfer Android (~/Library/Application Support/Google/Android File transfer/Android File Transfer Agent.app)

  XMenu application (/ Applications/XMenu.app)

  Carabiner application (/ Applications/Karabiner.app)

  Hidden Google Chrome application (/ Applications/Google Chrome.app)

  Hidden KiesAgent Application (/ Applications/Kies.app/Contents/MacOS/KiesAgent.app)

  fuspredownloader hidden Application (~/Library/Application Support /.) WAS / fuspredownloader.app)

  Plug-ins Internet: ⓘ

  AdobePDFViewerNPAPI: 15.017.20053 - SDK 10.11 (2016-08-03) [Support]

  AdobePDFViewer: 15.017.20053 - SDK 10.11 (2016-08-03) [Support]

  QuickTime Plugin: 7.7.3 (2016-09-13)

  JavaAppletPlugin: Java 8 update 101 build 13 (2016-08-07) check the version of

  AdobeAAMDetect: AdobeAAMDetect 1.0.0.0 - SDK 10.6 (2016-07-15) [Support]

  MeetingJoinPlugin: Unknown - SDK 10.2 (2016-09-28) [Support]

  User Plug-ins internet: ⓘ

  tblive-4: unknown (2016-10-03)

  Safari extensions: ⓘ

  Adblock more - Eyeo GmbH - https://adblockplus.org/ (2016-09-28)

  iTube Studio - iSkysoft Studio - http://www.iskysoft.com (2016-07-19)

  Open in Internet Explorer - Parallels - http://www.Parallels.com/fr/ (2016-07-24)

  3rd party preference panes: ⓘ

  Java (2016-08-07) [Support]

  Time Machine: ⓘ

  Automatic backup: YES

  Volumes to back up:

  Mac 500 GB internal: disc size: 505,01 GB disc used: 161,76 GB

  Destinations:

  TOSHIBA EXT [Local]

  Total size: 1.00 TB

  Total number of backups: 17

  An older backup: 24/01/16, 02:55

  Last backup: 22/09/16, 17:07

  Size of backup drive: adequate

  Backup size 1.00 TB > (disc 161,76 GB X 3)

  Top of page process CPU: ⓘ

  18% Google Chrome Helper (8)

  8% WindowServer

  6% mdworker (15)

  5% of Google Chrome

  3% kernel_task

  Top of page process of memory: ⓘ

  Google Chrome Helper 655 MB (8)

  631 MB kernel_task

  Mdworker (15) 201 MB

  119 MB Google Chrome

  Console 111 MB

  Virtual memory information: ⓘ

  49MO RAM free

  3.95 GB used RAM (647 MB cache)

  2 MB used Swap

  Diagnostic information: ⓘ

  October 5, 2016, 18:42:55 ~/Library/Logs/DiagnosticReports/QuickLookSatellite_2016-10-05-184255_[redacted] .crash

  / System/Library/Frameworks/QuickLook.framework/Versions/A/Resources/quicklookd. e app/Contents/XPCServices/QuickLookSatellite.xpc/Contents/MacOS/QuickLookSatellit

  5 October 2016, 12:43:53 self-test - spent

  October 5, 2016, 11:19:17 /Library/Logs/DiagnosticReports/Kernel_2016-10-05-111917_[redacted].panic [details]

  October 5, 2016, 11:02:31 AM/Library/Logs/DiagnosticReports/Microsoft Outlook_2016-10-05-110231_ [redacted].cpu_resource.diag [details]

  / Applications/Microsoft Outlook Outlook.app/Contents/MacOS/Microsoft

  October 4, 2016, 14:26:04 /Library/Logs/DiagnosticReports/Kernel_2016-10-04-142604_[redacted].panic [details]

  October 4, 2016, 10:31:37 AM/Library/Logs/DiagnosticReports/Microsoft Outlook_2016-10-04-103137_ [redacted].cpu_resource.diag [details]

  3 October 2016, 11:50:06 AM/Library/Logs/DiagnosticReports/Installer Progress_2016-10-03-115006_ [redacted] .crash

  com.apple.Installer-Progress-System/Library/CoreServices/installateur Progress.app/Contents/MacOS/Installer progress

  3 October 2016, 08:23:05 AM/Library/Logs/DiagnosticReports/Microsoft Outlook_2016-10-03-082305_ [redacted].cpu_resource.diag [details]

  3 October 2016, 08:05:42 /Library/Logs/DiagnosticReports/Kernel_2016-10-03-080542_[redacted].panic [details]

  October 1, 2016, 01:05:15 /Library/Logs/DiagnosticReports/Kernel_2016-10-01-010515_[redacted].panic [details]

  September 30, 2016, 11:49:17 /Library/Logs/DiagnosticReports/Kernel_2016-09-30-114917_[redacted].panic [details]

  September 28, 2016, 18:13:50 /Library/Logs/DiagnosticReports/Kernel_2016-09-28-181350_[redacted].panic [details]

  September 28, 2016, 10:03:09 /Library/Logs/DiagnosticReports/Kernel_2016-09-28-100309_[redacted].panic [details]

  If you have Bluetooth enabled, turn it off before going to sleep the computer.

• I don't like to upgrade Windows XP to Windows 7, because I'm blue screen/crash during the upgrade but the upgrade Windows XP to Windows Vista does not crash during the upgrade!

  I have my computer to another, here my specs:

  Intel Core 2 Duo
  Hard drive 500 GB
  2 GB OF RAM
  DVD player
  Floppy Disk
  The operating system that is running Genuine Windows XP Professional Service Pack 3 and just upgraded Windows 7 (but I know before upgrading Windows 7) and keep the blue screen / Crash when upgrading to Windows 7. but the upgrade Windows XP to Windows Vista is not blue screen/crash during the upgrade.
  Is anyone to upgrade from earlier version of Windows to Windows 7 without crashing and spending fortune?

  Hello

  1 did you change on your computer before this problem?

  2. What is the blue stop screen error message?

  3. When you receive a blue screen during the upgrade?

  You can follow the suggestions and then check.

  Method 1

  Disconnect external devices connected to the computer?

  Method 2

  You can read the article and then check.

  Upgrade Windows XP to Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/help/upgrading-from-Windows-XP-to-Windows-7

  See also:

  Windows 7 Upgrade and Migration Guide

  http://TechNet.Microsoft.com/en-us/library/dd446674 (v = ws.10) .aspx

• Failed to upgrade 10 Windows v3-772 - initialize not just crashes with the acer logo screen

  Hi guys

  I just had my computer repair and the SSD has been changed. I was running 10 before windows and everything was perfect until an update in ruins everything. Long history does not in this

  In any case I unstall all my software and do an update to windows 10. All the preparations and thus seems to be okay. Then it restarts and is stuck. Never of shots. I see the low activity of the HARD drive, but I let it run for 8 hours and still nothing, always gangs in the acer start window. It's once the bios loaded, because I can access that I'm fast and press f2.

  After a while, I gave up and thought maybe it was just a fluke, so I used my recovery dvd and reinstalled my system and the Agency and the outlook and... After the installation of about 5 hours, my system was ready to go. So I decided lets try again. And once again same failure. Just crashes with the Logo of Acer.

  I called Microsoft and they told to do me a startup repair. However it is not possible, I can get it in the repair mode, but none of the functions to work. Then they said that it was a material thing, but everywhere I look States the v3-772 should have no problem with the windows 10.

  I'm normally pretty good to fix my own problems, but in order to fix a problem I need a mistake or error code or something to go for. Does anyone have an idea what to do?

  ncmohr,

  I'm not completely sure what is the problem, but I'll tell you this.  When I look at Windows 10 drivers of Acer and BIOS for your computer model and see that there are some drivers Windows 8 and an old BIOS, it's really bad... especially if you try to get Windows 10 anniversary of working on your computer.

  I don't have the model of your computer, but I'll give you a bunch of links that may or may not help you get a version of Windows 10 installed on your computer.

  http://community.Acer.com/T5/V-and-VN-series-laptops/Acer-Aspire-v3-772-Windows-8-1-clean-install/TD...

  http://community.Acer.com/T5/Windows-10/Acer-Aspire-ES1-111M-cannot-install-Windows-10/m-p/460183#M4...

  https://www.heidoc.NET/Joomla/technology-science/Microsoft/67-Microsoft-Windows-and-Office-ISO-downl...

  https://Rufus.AKEO.IE/

  http://www.Acer.com/AC/en/us/content/Windows10-update

  http://www.Acer.com/AC/en/us/content/drivers

  ---------------------------------------------------------------------------------------------------------------------------------

  If you try to do a upgrade "on-site" Windows 8 for Windows 10 anniversary, then the link below and picture below might help... but I doubt it.

  https://www.Microsoft.com/en-us/software-download/Windows10

  

  Edit: I don't know if you should be using the drivers on the Acer website to download or just use the updated drivers that Windows automatically gives you.  Or a combination of both.  Try to start with the drivers Microsoft gives you automatically.  It could take hours for you to understand... Unfortunately.

  Edit2: On the Acer Web site, they gave you windows driver chipset 8.1 and Intel Management Engine Interface driver. And I suspect that the reason that they did is because they don't have to update your BIOS.

• Crashing in the host after software upgrade form VMworkstation 6.5 to 7.1

  VM Workstation: 7.1

  Host: Windows 7 64-bit

  Client: Windows XP SP3

  The packaging of the software in question worked less than 6.5 without problem, but after upgrade to 7.1 it becomes intermittent 0xC0000005 errors and break when in software rendering mode. Hardware rendering mode, both DirectX and OpenGL, work without errors but the performance is slow incrediblely (software requirements recommended is a processor of 300 mhz so...  ) Hardware rendering is likely to slow as the host has limited on the video material and excessive CPU power.

  so...

  Ideas on software made to crash? The software will start and run for 10-15 minutes before failing, it will fail at different points, and there is no obvious cause for the failure.

  Otherwise, any ideas on why a DirectX 7 program designed for processors of P2 is running slowly unusable in a virtual machine? Host running the latest DX, comments is running DX9.0c and 3D accel is enabled in the settings of the virtual machine. While there should be more than enough video hardware (the program runs on a video 16meg card) performance instantly goes to 100% when software rendering is selected, so seems that CPU or hard drive is the bottleneck.

  Any help would be appreciated.

  Hello

  TrueChaos wrote:

  ATI Radeon HD 3200, pilot, as of 05/27/10

  3D problems always seem to relate to ATI these days. Don't say not it is your problem, but...

  On linux there are problems with the 10.2 + drivers (it is same in the release notes workstation to roll back to version 9.11 for decent behavior 3D)

  Version 10.6 is supposed to fix, but when I tried it here for one of my ATI machines at base, my screen looks like the work of lego... so I've restored to 10.5, but cannot use the 3D on this machine...

  On OS X, also a lot of problems... I was under the impression that they delivered the right drivers for windows, but if I were you, I would try a pilot about a year ago... Sorry that I don't have best advice, it's like shooting arrows in the dark.

  It is a pity that I like ATI cards, they are usually not so power hungry than their equivalents from nvidia.

  SVGAVideo_HandleEscape: Error flushing video overlay unit 0. See the BLOG for more details

  I don't really know, I've seen it before too. Never managed to see the blog, they refer to, I think it's a cruel joke, I tried just even seeking help inurl function of google without results.

  --
  Wil
  _____________________________________________________
  VI Toolkit & scripts wiki at http://www.vi-toolkit.com

  Writer to the blog www.planetvm.net

  Twitter: @wilva

• Satellite A65 - Crash during the upgrade of the BIOS. Not now boot.

  I have a satellite A65 s-1064, and I was upgrading the BIOS from windows. Suddenly, the computer turns off, and I thought that it meant that the update was made. I pressed the power button, and booted the laptop, but remained at a black screen. I thought maybe the BIOS was always something, so I left for a while. After an hour, I returned to find even on the black screen.

  I pressed the power button to restart, but nothing happened. I finally had to pull on the power cord and the battery. Once I did, I plugged it back in and put the battery in, but nothing happened. No battery charging lights. No power lights at all. Nothing happens when I press the power button. My question is, could do a BIOS upgrade failure, and could I somehow reflash the BIOS without power?

  Hi Brandon,.

  It is very unusual for an upgrade of the Windows BIOS cause this kind of problem. Normally, the power subsystem is quite independent of the BIOS.

  Is there a reset button that you can use to reset the system your A65? (Sorry, but I'm not familiar with the A65). If so try to press it to see if this will allow you to restore the power of your laptop.

  If you get no power at all (try removing the battery and then connect to the AC adapter), then it is possible that the power supply or the motherboard did not in this case, you will need to contact an approved Service Agent for the laptop repaired.

  As for your question about flashing the BIOS without power, I'm afraid that this is not possible. You will certainly seized the restoreds power to your laptop you can proceed with your upgrade of BIOS.

  HTH

• Laptop not start after upgrading the BIOS crash

  Hi all

  I just want to ask if there a chance to reactivate my Satellite A300 after crash BISO update without it sends to the service of Toshiba.

  I downloaded the new BISO and he started in the Windows menu. After a few seconds my PC crashed and everything was frozen.
  I turned off the PC.
  Now, when I press the power button to boot up the laptop, the screen is black and I can a sound BRR, BRR, BRR of the CD-Rom drive.

  Don't you think that it is possible to boot from a CD or something like that. Is it possible to reactivate my phone?

  Your help would be really appreciated!

  Thank you very much

  Best regards

  Chotte

  Sorry but if the BIOS chip is damaged there is not a lot, you can do about it. You must contact the Toshiba authorized service provider.

• DM1 #WX899UA #ABC notebook: pavilion Dm1 crashed during the attempted upgrade win7 win10

  TRIED to LEVEL WITH WIN10 media USB and after two days creating his stop because she looks stuck.

  Tried to resuscitate her for the last two days and currently hdd is no longer recognized in the bios.

  the last time I saw drive c with 15 meg of 200 GB drive was something during the chkdsk command that I fell into the 10 victory of the media creation tool repair mode. I had to 'unlock' or dismount the Volume, and all open handles subsequently would be invalid.

  (Whatever that means...).

  now I can start only from the USB port. As in the bios, there is no device found startup, there is no hard drive in the bios says hard drive test.

  now I think I need to get a win7 on USB startup file to get her going again... maybe? If yes where?

  also when I tried to download win7 from MS, REQUIRED the product key but the label is worn and were guessing the lack of tanks erase...

  Of course right about now, I have a few words of choice for bill gates... with his win 10 that my laptop is verified to be able to run!

  any suggestions are welcome. BTW, tried all the suggestions on the HP support site...

  Also makes a disc image before I looked at all this, but it is not accessible because of the bios not being able to see the hard drive...

  Thank you

  OK, thanks for this update - guess their link is more ISOs OEM.

  So here's another link - and it does not include the OEM ISOs, but again, I don't know if they will work for HP: http://www.majorgeeks.com/files/details/universal_windows_downloader.html

  Good luck

• 25.0 Firefox crashes, unless the mouse is moving

  25.0 Firefox crashes, unless the mouse is moving

  People from bad news. While this problem is certainly wrong with 25 and 25.0.1, I also saw him on 24 on Windows 7 after downgrading from 25. The behavior on 24 is quite erratic (a YouTube may play very well once but freeze on the replay), but it's still there intermittently. I've ever seen before moving to 25 so my suspicion is that some of the damage by the upgrade (perhaps entries from registry or links to flash drive) which cannot simply be cancelled by the resettlement of 24.

• Firefox 7.0.1 crashes at the start of the application

  I'm going through Firefox 5.0.1 for 7.0.1. The update installs successfully, but it does not start. It blocks whenever it opens. I can reinstall 5.0.1 and it will work. While working 5.0.1 I removed all plugins and then upgraded to 7.0.1. Still, it crashes when the application starts. I also go add/remove programs via the Control Panel completely removed Windows Firefox and even deleted the installation directory. I then tried to do a completely new installation in a different installation directory, and still, it hangs at startup.

  See:

  • bug 680927 NEW crash of start-up mozcomp.dll with Oracle Enterprise, F5 Networks, Passlogix V - GO, IBM Tivoli Access Manager SSO

• Satellite Pro A110 crashes during the transfer of the large data in LAN

  Hello

  My Satellite Pro A110 crashes during the transfer of the large data in LAN. The network driver is a Realtek RTL8139/810 x Family Fast Ethernet NIC I've been looking through this forum and found some wire whit exactly the same problem, saying that the solution is to update Realtek lan set up in BIOS, not the computer BIOS, but I can't find any link to download the necessary upgrade file. Can anyone tell me please where to find this upgrade file or send it to me directly?

  Thanks in advance

  Is - this transfer of data in the company where you work? Do you want to download data from the server, or how to understand this? How to understand what you mean under big data?

  Have you tried downloading data on the Internet? For example, if you try to download some trailer HD (more than 200 MB)?

• 4.3 Skype crashes with the old chat history

  After the upgrade to version 4.3, Skype crashes after the connection probably loading the message history.

  I tried to remove the. / record of Skype and it works like that. However, when I put the old user folder (just the , not all '. ') Skype file"), it crashes. I also tried to remove the file and then merge the history using http://suurjaak.github.io/Skyperious/ and it hangs again.

  Any solution that would keep my history?

  Maybe I have found a solution after some web research, I Skype with * wholesale * historical log... Before these orders, I can't run Skype because it segfaults with the same track of gdb in your newspapers.

  I changed my main.db database, with:

  SQLite3 $ ~ /. Skype/[YOURUSER}/main.DB

  And then, I've updated the table of Messages as another post , but I have to translate the part of the message 'sent' in my language, so I have Skype in Italian with a simple:

  SQLite > body_xml SELECTION of Messages WHERE type = 68 AND body_xml LIKE '% file %' LIMIT 0,10;

  I found the translation for "Shift": "ha inviato ' and ' ha spedito" (which are two translation valid for posted... I don't know why there are two different versions...).

  Then in a:

  SQLite > UPDATE Messages SET body_xml = substr (body_xml, instr(body_xml,e)
  SQLite > UPDATE Messages SET body_xml = substr (body_xml, instr(body_xml,e)

  followed by

  SQLite > .quit

  Now I have my 4.3 Skype works fine with my entire chat log.

  k.

• Skype crashes on the Mountain Lion Developer Preview

  I upgraded my iMac to Mountain Lion overview of developers and Skype crashes. The audio parameters are constantly and errors in the display and I can't seem to let him use my headset USB most of the time. Generally, it crashes when making an outgoing call.

  I use Skype all day and had to set up another computer just so that I can make and receive calls. Very frustrating!

  Everyone has similar problems or have a fix?

  I hope that they fix on the next generation.

  Well... Good news... 10.8.1 whit... Skype works PERFECT!...

• Satellite A100-225 keeps freezing and crashing with the new HARD drive

  Hi all

  I have a Satellite A100-225 with a 100 GB SATA Hitachi drive I int it that recently started showing bad sectors. Then I bought a Hitachi 320 GB SATA II drive to replace it. I tried the drive and it was recognized right away, so I didn't need to change the SATA speed. I ran the restore a disk installed newest. The problem I have is that the computer keeps freezing and crashing with the new drive. It takes a lot of time to load up when turned on and there is a noticeable to untermittant delay when you drag the cards around solo.

  I tried to run the Hitachi drive test and it comes back fine. I also tried to turn the SATA speed of the drive down from 300 to 150 via the firmware, and although I saw a slight improvement, it is still not right.

  I talked to Hitachi and they say that he could not be 100% compatible, so the problems. Someone at - it else sucessfully set up a replacement for this notebook drive and if so what make and model. Has anyone else had simular problems?

  Thank you

  Years ago, I've updated yet more former Satellite M70 with SATA HDD (270 GB if I m remembering well) and everything was fine.
  In my view upgrade with SATA HDD normal shouldn't be a problem. Do not SATA II because it will not work faster.

  I can't say for sure, but there must be a compatibility problem.

  Let's see if someone else had better luck with the upgrade of the disk on the Satellite A100.

  Have you checked this forum with advanced search option? Maybe you can find some old NET on upgrade the HDD on A100.