Slate 7 HD display behaves badly ONLY when charger plugged!

Similar Questions

• Compaq 6710 b: my HP Compaq power on only when I plug in power. Don't turn on with the power button / stop!

  I have a laptop HP Compaq 6710 b... Its more than 6 years...

  The problem is really annoying... The laptop powers on only when I force taken into the spindle of the charger and the laptop works very well after that...
  But the laptop never turns on when I try to power by pressing the power button!
  I did not understand the reason why...

  Any thoughts on this problem?  Help!

  There are no settings in the BIOS that affect the use of the power button.

  The power button works at the level of the material (firmware).

  By pressing the button translates the action of the Commission of the conditions of the logic system.  There must be voltage at specific points in the power circuit. If the voltages are not present, then the power button does not work. This can be caused by a failure resistance, mlcc capacitor or a bad solder joint, if the power button has been tested and shown to work normally. Fluff even could cause this to happen. This can help out-performed by Visual inspection and using a multimeter.

• Display a date only when it is a certain day of the week in BI answers

  Hello
  
  I'm trying to display a date, but only if it's a Friday in BI answers.
  
  So far, I have in the formula in the column:
  
  ' BUSINESS day of the WEEK ("calendar of MQ - delivered". "Delivered the calendar Date") WHEN "Fri", THEN "calendar MQ - delivered". ' "Delivered to the calendar Date" END of OTHER NULL '
  
  
  It does not display anything, but I know that there is Friday in date data.
  
  Any ideas anyone?
  
  Thank you very much
  
  
  Graham

  Because the condition is not good ;-)

  Try this:

  CASE WHEN DAYOFWEEK("MQ Calendar - Delivered"."Delivered Calendar Date") = 5 then "MQ Calendar - Delivered"."Delivered Calendar Date" else null end
  

  See you soon
  Nico

• Windows Live Photo Gallery-no is not able to display images icons only when transferring photos

  Uploading photos

  When I'm in my heritage and try to upload pictures from Windows Live Photo Gallery, all photos don't come upward in an image format - only the flower box Orange photo library so can't find the pictures I want to download.  It's so frustrating I want to just upload a picture of my family tree.

  Try to directly browse your pictures folder
  and see if you can download the photos.

• Change profile to display a name only when others receive emails from your

  Is it possible to edit the profile so that when you send an email to friends, they can't see your first name?

  I think that I managed to get around this 'feature' by typing just a period in the "Last Name" box (but I could be misremembering).

• Color display Xperia XA appear when charging

  I have this problem with my new phone. It happens every time I plug to the load. When the screen is off, it turns on itself with colors appear on the screen from red to green, like the Rainbow. After I turned off, it seems again after an hour. It only happens when I'm charging the phone.

  When loading, it gets hotter, I thought that it is because of this coloring of the screen. Because it turns on and consumes battery during charging. I have to stay near the phone to turn off the screen when he's in charge.

  I'll be happy to hear useful advice in this regard.

  Settings, display, reverie put it out of service

• Display the field calculated only when there is data

  Hello

  Is there a way to display my value only when the data entry field is used. For example, if I have several fields aligned vertically, I don't want to display a bunch of zeros if their data fields are not used.

  Thank you!!!

  You must write the script in the event of Field2 Calculate.

  The value of the FormCalclanguage.

  if(numPeople.RawValue ne null) then

  numPeople * 12

  endif

  My previous answer shows 2 ways to write the same script. A FormCalc and other JavaScript...

  Thank you

  Srini

• Phone to download a lot of data via WiFi only when the charger is plugged - iPhone iOS 9.3.1 6s

  Hello

  Just today, I noticed that my iPhone 6s was download continuously at the speed of the network via WiFi only when is plugged in the wall charger or the USB loader on the computer. As soon as I stop charging the phone, the download stops. I have no idea what download and I'm a little frustrated because my connection high speed/wireless home is capped.

  Sync to iTunes on WiFi and iCloud backups are disabled. I had subscribed to 9.3.2 iOS beta on the registration by registering with my Apple ID last week, but I haven't added the certificate so that it can download OTA or via iTunes. I have no update available on my Apple store as well.

  I noticed the slowdown on my cause of internet connection of desktop computers that my phone of summer download something on wifi while he is in charge and I also saw the use of the network by using "System Monitor" app on the App store.

  Kindly help me to solve this problem.

  Thank you

  I did a factory reset on by phone by "Erase all content and data" and chose to set up as a "new iPhone" after reset done. There are now only apple applications on the phone, I connected to wifi with the charger plugged and the problem persists. I wonder if it was to be an apple iOS update, I am on iOS 9.3.1 and 9.3.2 is still in beta, I'm not sure if there is an apple update going on in the background.

  Kindly help.

• WiFi drops (DNS) when charger is connected

  Hello

  Whenever I plug my charger on my Macbook Air 11 '', my fair blocks Wifi. Not only on my macbook, but on everything. It's sort of something to the router. I have no idea what. I had my ISP mechanic come over a few times to check if it's something on their side, but it is not. I can not find similar problems on the net. And I've checked everything. All settings are good. But only when I plug in my MacBook charger, it messes with my router and all of a sudden he says "Resolving host" and the DNS is lost. Even tried using different open DNS addresses. Nothing helps.

  The magsafe becomes openly warm? You can use this mac/systems/power on off button to see what voltage it is putting out. Should not be more 12500MV.  https://support.Apple.com/en-us/HT203207 you can also try a SMC reset.  https://support.Apple.com/en-us/HT201295

• Hello. I have the DVD of Lightroom 5.7.1 version. He just started is behaving badly and I've deleted and reinstalled the product. When I'm in the 'development' module, I get random stains of color in my images. This only happens in the develop module and

  Hello. I have the DVD of Lightroom 5.7.1 version. He just started is behaving badly and I've deleted and reinstalled the product. When I'm in the 'development' module, I get random stains of color in my images. This only occurs in the develop module and no where else. It also does not reach any other software or area on my pc. I also changed the cable and the same triesd another monitor. Anyone have any ideas? Thank you.

  Are patches of red and blue color?

  If so, you probably have warnings of cutting of light/shadow enabled. Press J to hide them.

  You can also activate their power by clicking on the arrows up left and right of the histogram.

  Salient facts cut medium red, medium blue clipped shadows.

• Display shuts off and comes back only when the Satellite A210 is restarted

  Hello

  Satellite A210 display goes off in time and returns only when the computer is restarted.
  Duration usual DURATION 30 or 45 minutes

  Please advice
  # Is it a hardware or software problem?
  # Some other face same problem brings advice?

  The machine is a year and a half old runs windows vista Basic that comes with it.

  I reinstalled the drivers card display also the problem remains same

  Hello

  Have you tried an external monitor on the laptop?
  If the external monitor works fine, it seems to be a problem of internal display and must be replaced.

  You use the factory settings on your laptop computer or you have installed your own version of Windows? Before turning to an authorized service provider, you need to restore factory settings to determine if it s a hardware or software problem. With the factory settings, everything should work fine and if not, I think it s a hardware problem.

  Check this box!

• Is there an easy way to create "the mouse on the text, to display the image" without coding it? I want an image to appear only when you move to a line of text. I found the code for it but I want to find an easier way. Thank you!

  Is there an easy way to create "the mouse on the text, to display the image" without coding it? I want an image to appear only when you move to a line of text. I found the code for it but I want to find an easier way. I'm creating a home page with a list of text links. I want to design as well as in the overview of one of the text links, a corresponding image is displayed to the right of the page. I also need a default image to rest all the time unless one of the other links text is hovered over. Thank you!

  Try to use a Widget for Composition in the Adobe Muse Widgets Panel.

  I would like to start with a blank publication.

  Place your text in the button area.

  Place your image in the display area.

• Why a normal digital text read like a phone number on my site only when the display on the phone or Tablet?

  Hey everybody.

  I'm working on a website and have an ABN followed of the digital text however it does not read as text on a phone or a tablet. In fact, numbers are invisible and when you click it then numbers and calling area is triggered.

  How can I fix this please.

  Help.

  Double post of why a normal digital text reads like a phone number on my site only when the display on the phone or Tablet?

• Void Display Menu GUI only on the selection of the checkbox, hide when they are disabled.

  Hi all

  Can someone help me with the GUI stuff in the code below.

  I have this code to display the two menus,

  Coordinates (CheckBox) with three Radio button elements.

  and similarly textboxes (checkbox) with two radio button elements.

  So I want here to do, it's to highlight radio buttons only when you click on checkbox.

  Otherwise just hide them

  

  Currently, the code displays each time the box @.

  // Config values
  
  
  
  
  
  
  var dlg = new Window('dialog', 'Title');
  dlg.frameLocation = [100,100];
  dlg.size = [300,350];
  
  
  dlg.intro = dlg.add('statictext', [20,10,220,30] );
  dlg.intro.text = '"Select 1 (or) more items"';
  
  
  
  
  
  
  var CoordinatesCheckBox = dlg.add ("checkbox", [20,90,150,110], "Coordinates"); 
  
  
  var centerCoordinateRB = dlg.add ("radiobutton",[40,110,200,130] , " Top "); 
  var midCenterCoordinateRB = dlg.add ("radiobutton",[40,130,200,150] , " Middle "); 
  var leftCoordinateRB = dlg.add ("radiobutton", [40,150,200,170], " Bottom "); 
  
  
  
  
  var textAreasCheckBox = dlg.add ("checkbox", [20,170,150,190], " Text"); 
  var horizontalSwipeRB = dlg.add ("radiobutton", [40,190,150,210], " Horizontal "); 
  var verticalSwipeRB = dlg.add ("radiobutton", [40,210,150,230], " Vertical "); 
  
  
  dlg.GenerateButton = dlg.add('button', [20,270,150,300], 'Generate', 'CenterCoord');
  
  
  
  
  // Button Event Handler
  function clickHandler(e)
  {
      generateDimensions();
  }
  dlg.GenerateButton.onClick = clickHandler;                                             
  dlg.GenerateButton.addEventListener('mousedown', clickHandler); 
  
  
  
  
  
  
  dlg.show();
  
  
  
  
  
  
  var bCoordinatesCheckBox = false;
  CoordinatesCheckBox.onClick = function () 
  {
      if (CoordinatesCheckBox.value == true)
      {
            bCoordinatesCheckBox = true;
            clearCheckBoxes(eAssetCoordinatesChecked);
       }
       else 
           bCoordinatesCheckBox = false;
  }
  
  
  var btextAreasCheckBox = false;
  textAreasCheckBox.onClick = function () 
  {
      if (textAreasCheckBox.value == true)
      {
            btextAreasCheckBox = true;
            clearCheckBoxes(eSwipeAreasChecked);
       }
      else 
            btextAreasCheckBox = false;
  
  
  }
  
  
  var bHorizontalSwipe = false;
  horizontalSwipeRB.onClick = function () 
  {
      if (horizontalSwipeRB.value == true)
           bHorizontalSwipe = true;
  }
  
  
  var bVerticalSwipe = false;
  verticalSwipeRB.onClick = function () 
  {
      if (verticalSwipeRB.value == true)
           bVerticalSwipe = true;
  }
  
  
  
  
  var bleftCoordinateRB = false;
  leftCoordinateRB.onClick = function () 
  {
      if (leftCoordinateRB.value == true)
           bleftCoordinateRB = true;
  }
  
  
  var bmidCenterCoordinateRB= false;
  midCenterCoordinateRB.onClick = function () 
  {
      if (midCenterCoordinateRB.value == true)
           bmidCenterCoordinateRB = true;
  }
  
  
  
  
  var bcenterCoordinateRB = false;
  centerCoordinateRB.onClick = function () 
  {
      if (centerCoordinateRB.value == true)
           bcenterCoordinateRB = true;
  }
  
  
  
  
    
  

  for option buttons put a MyRB.enabled = false;

  then set it to true in the service, onclick for the related checkbox control

• Displaying the time in the Date fields only when it is available

  Is it possible to display the component "hour" of a field of date only when the component "hour" is available? I know that the default behavior of not showing the component "hour" of the date fields can be changed by setting the date format NLS in the preferences to include the time as well. However, what causes the fields without component to appear with zeros. (For example: If nls date format is DD-MON-RRRR HH24:MI:SS, a date with no field component "time" will appear as * 1 January 2008 00:00:00 *). It is a configurable option in Quest SQL Navigator, with 3 options available, that says "(afficher l'heure dans les champs date: a) (never, (b) when available or c) always, who miss me dearly in SQL Developer."
  
  Thanks in advance for your suggestions,
  KLS.

  No, but you can vote on the feature to http://htmldb.oracle.com/pls/otn/f?p=42626:39:4403831115154402:NO:P39_ID:16221 request to add weight to implementations in a future version.

  Kind regards
  K.