Sleep with the Ideapad S10-3 problem
A week barely returned this Ideapad S10 - 3 to the initial state to overcome a problem with mode 'sleep', which has recurred just - worked well in sleep for a few days then back to this question - that's why this message - when I put the netbook to sleep by closing the lid, 2 left lights on the left front light & the system stops responding - only by holding the power button down to kill the system then by restarting the system that reboots can sleep (I put the hybrid sleep system on) extended is the problem solved.
Ideas to make the system normally sleep?
Hi pday12au,
If you are running Windows 7 and Windows Update received before the problem, you can try to perform a system restore (click Start > type System Restore) and disable windows to automatically receive updates (click Start > type Windows Update > choose change settings on the left sablovaseuse) then watch the PC.
If your system is entirely through Windows Update before the problem, try to apply this "standby" difficulty.
I hope this helps.
Tags: Lenovo Notebooks
Similar Questions
-
I bought a trial 30 Adobe BC and then enabled so I could have the product. An email is sent with the serial number. Problem is that I don't have the previous version and computer scientist was here, where he suggested I ask you to please provide me with the version complete.
Did you buy the full version or an upgrade?
-
I've uninstalled and reinstalled the drive several times with the same result, my problem is when I download the drive icons for my browsers and changing most of my the desktop icons for the adobe logo, so when I click on them Adobe tries to open them, of course, he does not format because it's not an adobe application , so I tried to restore the computer to an earlier date and it wont let me as long as Adobe reader is installed, so I need to uninstall and now I have nothing to open files and downloads of Adobe, someone had this problem and if so, did you get it resolved? Thank you Tommy...
This may help: Application, file icons change in Acrobat/Reader icon
-
Unable to connect wireless with Lenovo Ideapad S10
Connects to other places, but does not connect to my place with a modem DSL from Westell 327W (carrier Verizon). Thin hard wire Mills, other laptops connect very well but not the Lenovo S10. Tried everything - Open - security-enabled system - firewall off and nothing. Can see the wireless network in the list, the signal is excellent but won't connect - just keep trying.
Any suggestion is appreciated...
There are tons of markets in this forum about the similar problem will fade with the S10 or other ideapads. Check in the nets and you can be fined a solution that can also work for you. One of them is upgraded to the latest driver for the adapter wireless on lenovo http://consumersupport.lenovo.com/ site. Search for positions of rstoegbauer who has posted on this issue. Good luck.
-
Is - this RAM is compatible with the IdeaPad Z575?
Yesterday afternoon, I purchased a Lenovo IdeaPad Z575 for $499.00 from this link: [url]http://www.newegg.com/Product/Product.aspx?Item=N82E16834246328 [url]
Obviously, it didn't come in the mail again. I'm looking to upgrade the RAM in the laptop. It comes with 6 GB of RAM, a 4 GB stick, and a 2 GB key. The problem is, I don't really know what kind of RAM is in the computer. I'm looking to replace the 2 GB key with a second stick of 4 GB.
Uses the type of the laptop RAM is ddr3 1333 mhz pc3-10600, without parity, capable channel, 2 dimm 204 sockets so pin RAM.
My question is whether or not this RAM is compatible with the laptop: [url]http://www.amazon.com/Samsung-Electronics-Extreme-MV-3T4G3-US/dp/B00591ZYX8 [url]
In addition, if there is a better option for the RAM for this laptop, I would like to know.
Yes this ram works. also, if you ever want to check compatibility you should visit crucial.com is an excellent reference on several memory upgrades.
-
T410 fails to wake up from his sleep with the installed 2nd hard drive?
Since I installed a second hard drive in my T410, a 250 GB Hitachi drive, my machine can't seem to wake from sleep (sometimes)... So, I have to do a hard reset.
I had the same problem without the 2nd disc when I tried to use the HD password in BIOS and discovered that it was something to do with the disc Crucial M4 I use. But this same problem happening now since using the 2nd disc slot.
Any ideas? I really like the extra storage space and won't remove based on this problem.
Well it seems that the problem was caused by the version of the firmware for the SSD I installed it.
The problem has been solved by updating the M4 Crucial SSD with the latest firmware...
.. .and it solved the HD1 password issue too.
-
Strange to sleep with HP Pavilion Elite e9270f problem
I have a HP Pavilion Elite e9270f running Windows 7. I have a strange problem sleep/hibernation began about two months ago, which makes me a little nuts. I usually select sleep in the Windows menu when I want to put the computer in mode 'sleep'. It takes about a minute of attentive of disk, and then light on this case turns from blue to yellow. A few months ago, I would either press the yellow button, or press a key on the computer, and I'd hear the fans turns on, light would change from yellow to blue and the computer wakes and be ready to use.
Now (in the last two months), when I press the yellow button, the fan turns on, the light goes off completely, and nothing is happening right here.
To recover, press and hold the power button for about 5 seconds, then the computer turns off. I turn it back on with the power button and then wait so he could get out of sleep of hibernation. It takes about 4-5 minutes to make it usable.
Any ideas on what could happen?
Thank you
Jonathan
I tried the steps and processes in the article that you referenced. Nothing seemed to work. I had given up and finally thought that maybe the power supply was a problem, since it provided the day before. To my surprise, a new power supply solved my problems of sleep. Seems that the original must have had a problem keeping the tension during sleep.
Thanks for your help.
Jonathan
-
Network with the MacBook Pro 15 "problems
My new MacBook Pro (15-inch, mid-2015 retina) has 16 GB memory MHz DDR3.
2.8 GHz Intel Core I & and an AMD Radeon R9 M370x PCie, in addition to an integrated
Chipset Intel Iros Pro model. I am running OS X El Carolina Version 10.11.6, with 12 Parallels and Windows 7 for a few
the company's programs, but I mainly work on the Mac side.
An intermittent connection problem became constant after a week of using the computer. My router DLink DSL (model 2750B) is two feet away from the computer. In the system preferences / iCloud, I get "There was an error connecting to server Apple ID" my MacPro, iPad Samsung Galaxy S7 and Air 2 all connect with the same router wireless without any problem. (All my OTHER computers connected also with the same Apple ID and password without problem. IMac 2012, MacPro, 2012 MacBook Pro, iPad 2 and the new iPad 2 Air)) I have a screenshot of the error message "None of your preferred networks are available" and in the same time to a list of all available networks, including my own. Several times, I click on my network and get the response "the xxxxxxnetwork could not be contacted."
I solved problem with Verizon, my provider, yesterday, and the routine test found that I have an intense tone, but the computer could not complete the test routine. I ran "Diagnoses" several times this evening - this is after 23:00, and the report suggests that I will review wi - if recommended (fact), that I have a crowded WiFi channel (almost anyone else is in the building at this late hour) and I have to reboot the router (I did several times) and that maybe I should join a Wi - Fi network network that is associated with the Internet (like mine that works for all other devices.)
Any suggestions on how to solve problems, or I would return the computer. It's beautiful, and I spent a lot of time updating, installation, customization, before this stop of a Wi - Fi. I had to buy a new router, but tests with Verizon made me doubt that a new router would solve this problem.
Thanks for all the wisdom and strategies. Maggie2012
Hello maggie2012,
Thank you for using communities of Apple Support.
I understand your message that you are not able to connect your new MacBook Pro to your home Wi - Fi network. You did some great troubleshooting so far! I also recommend you to test the issue in Safe Mode and in an another user account on your Mac. The following articles will provide you with the steps necessary to test the problem in Mode safe and in another user account:
How to test a question in another user on your Mac account
Best regards
-
Connection with the Apple ID server problem
iCloud on my ASUS ZENBOOK can not connect. It always returns a connection error message: there is A PROBLEM CONNECTING WITH THE APPLE ID SERVER.
My laptop is an ASUS model UX303L (64-bit) running Windows 10 Home, Version 1511.
Key points:
(1) I have connected to my very well through several iPhones iCloud account, multiple iPads, an iMac and another ZBOX PC running the same version of Windows 10. (Confirms that it is not a problem of "User" with me trying to use the wrong password).
(2) from my laptop problem, I can connect to the internet fine iCloud - Chrome and Firefox version by.
(3) I have the latest version of iTunes on the laptop, which starts very well and logs in my iTunes store (.. .in the Australia). [This is interesting, because I guess that both iTunes and iCloud connect to the same server Apple ID to check the details].
(4) I made sure that Windows is completely up to date, and that my office 2013 is also entirely up-to-date, with a full stop/restart of the laptop to make sure that nothing is installed in half.
(5) I uninstalled iCloudand reinstalled from a new download. Did not help.
(6) before the iCloud upgrade to the latest version there is + 2 weeks (I'm now on the 5.2.1.69 Version), iCloud worked perfectly, including the good synchronization of Outlook calendar and favorite contacts on different browsers. I want to try and reinstall the old version - see if that restores me to my nirvana earlier, but I couldn't find anyway to do.
Suggestions as to best 'next steps', I can take would be highly appreciated...
I have exactly the same problem... is there any help for us?
So far, I've been forced to use Windows 7
-
I have been using ideapad s10 for two years now... All of a sudden today, the power state shows "ON LINE". Earlier, it will display as "RELOAD".
And also the remaining battery power is still 56 percent. It does increase not plugged. Can anyone suggest me a solution for this.
This means that the battery is lose his life?
Thanks in advance.
Well Yes,.
Remove the battery & remove power cord / adapter.
Then hold the power button for 15 seconds continuously.
reconnect the battery and AC-
Empty static.
-
- Programs you have problems with - very slow connection with all pages
- Error messages - on the profile of my son is unable to connect at all with the error message
- Recent changes made to your computer - windows 7 but added meeting the problem before this
- What you have already tried the problem - claimant contacted no problem with their connection
Remember - this is a public forum so never post private information such as numbers of mail or telephone!
Hello
Reinstall the NIC drivers
Reset the router and check. -
router in 1921 with the double nat ADSL problem
I have problems with the implementation of a router in 1921 with double lines ADSL for failover. For some reason any internet traffic keeps using Dialer 1 as internet main connection, while 2 Dialer should be primary. Also, when I finish my NAT with allowed a full acl, it translates the public ip address of the 2-to-1 Dialer the Dialer before she sends in the internet.
This is my config:
!
interface GigabitEthernet0/0
Voice netwerk description
IP 192.168.77.254 255.255.255.0
IP helper 192.168.177.1
IP helper 192.168.177.254
IP nat inside
IP virtual-reassembly in
IP tcp adjust-mss 1400
automatic duplex
automatic speed
!
interface GigabitEthernet0/1
Inside the interface description
IP 192.168.177.254 255.255.255.0
IP mtu 1492
IP nat inside
IP virtual-reassembly in
IP tcp adjust-mss 1400
automatic duplex
automatic speed
!
ATM0/0/0 interface
Description 1/10 Mb Tele2 ADSL
no ip address
No atm ilmi-keepalive
PVC 0/35
aal5mux encapsulation ppp Dialer
Dialer pool-member 1
!
!
interface Ethernet0/0/0
no ip address
Shutdown
!
ATM0/1/0 interface
no ip address
No atm ilmi-keepalive
!
interface Ethernet0/1/0
VDSL 5/50 Mb KPN description
no ip address
!
interface Ethernet0/1/0.6
KPN VDSL description
encapsulation dot1Q 6
PPPoE enable global group
PPPoE-client dial-pool-number 2
service-policy output parent policy
!
interface Dialer1
Tele2 ADSL description
the negotiated IP address
no ip redirection
no ip unreachable
no ip proxy-arp
IP mtu 1492
NAT outside IP
IP virtual-reassembly in
encapsulation ppp
IP tcp adjust-mss 1400
Dialer pool 1
Authentication callin PPP chap Protocol
PPP pap sent-username *.
No cdp enable
card crypto SAL_map
!
interface Dialer2
VDSL KPN description
the negotiated IP address
no ip redirection
no ip unreachable
no ip proxy-arp
IP mtu 1492
NAT outside IP
IP virtual-reassembly in
encapsulation ppp
IP tcp adjust-mss 1400
load-interval 30
Dialer pool 2
PPP authentication pap callin
PPP pap sent-username *.
No cdp enable
card crypto SAL_map_VDSL!
IP nat inside source overload map route sheep interface Dialer1
IP nat inside source overload map route nonat2 interface Dialer2
IP route 0.0.0.0 0.0.0.0 Dialer2 Track1
IP route 0.0.0.0 0.0.0.0 Dialer1 254
!auto discovering IP sla
ALS IP 10
echo ICMP - 62.69.174.75 source-interface Dialer2
Timeout 30000
frequency 30
Annex IP SLA 10 life never start-time now
!access-list 102 deny ip 192.168.177.0 0.0.0.255 host 192.168.1.249
access-list 102 deny ip 192.168.178.0 0.0.0.255 host 192.168.1.249
access-list 102 deny ip 192.168.179.0 0.0.0.255 host 192.168.1.249
access-list 102 deny ip 192.168.177.0 0.0.0.255 172.28.1.0 0.0.0.255
access-list 102 deny ip any 192.168.255.0 0.0.0.255
access-list 102 deny ip any 192.168.254.0 0.0.0.255
access-list 102 deny ip 192.168.177.0 0.0.0.255 192.168.179.0 0.0.0.255
access-list 102 deny ip 192.168.177.0 0.0.0.255 192.168.178.0 0.0.0.255
access-list 102 deny ip 192.168.177.0 0.0.0.255 192.168.79.0 0.0.0.255
access-list 102 deny ip 192.168.177.0 0.0.0.255 192.168.78.0 0.0.0.255
access-list 102 deny ip 192.168.77.0 0.0.0.255 192.168.179.0 0.0.0.255
access-list 102 deny ip 192.168.77.0 0.0.0.255 192.168.178.0 0.0.0.255
access-list 102 deny ip 192.168.77.0 0.0.0.255 192.168.79.0 0.0.0.255
access-list 102 deny ip 192.168.77.0 0.0.0.255 192.168.78.0 0.0.0.255
access-list 102 permit ip 192.168.177.0 0.0.0.255 any
access-list 102 permit ip 192.168.77.0 0.0.0.255 any
!Dialer-list 1 ip protocol allow
Dialer-list 2 ip protocol allow
!
nonat2 allowed 10 route map
corresponds to the IP 102
Set the interface Dialer2
!
sheep allowed 10 route map
corresponds to the IP 102
Set the interface Dialer1the ACL is built to exclude some ips private for ipsec VPN destinations.
Any suggestions on what I'm missing? It must use dialer 2 as primary internet connection and failover of Dialer 1 if IP SLA fails. The SLA config seems to work properly:
SH ip route
S * 0.0.0.0/0 is directly connected, Dialer2
84.0.0.0/32 is divided into subnets, subnets 1
C 84.246.25.231 is directly connected, Dialer1
145.131.0.0/32 is divided into subnets, subnets 1
C 145.131.131.112 is directly connected, Dialer2
192.168.77.0/24 is variably divided into subnets, 2 subnets, 2 masks
C 192.168.77.0/24 is directly connected, GigabitEthernet0/0
The 192.168.77.254/32 is directly connected, GigabitEthernet0/0
192.168.177.0/24 is variably divided into subnets, 2 subnets, 2 masks
C 192.168.177.0/24 is directly connected, GigabitEthernet0/1
The 192.168.177.254/32 is directly connected, GigabitEthernet0/1
192.168.254.0/24 is variably divided into subnets, 2 subnets, 2 masks
S 192.168.254.0/24 is directly connected, Dialer2
192.168.254.37/32 S [1/0] via 77.241.229.241
S 192.168.255.0/24 is directly connected, Dialer1
212.121.121.0/32 is divided into subnets, subnets 1
C 212.121.121.183 is directly connected, Dialer2
213.144.228.0/32 is divided into subnets, subnets 1
C 213.144.228.72 is directly connected, Dialer1http://docwiki.Cisco.com/wiki/category:NAT
Above document indicates "Beware of the use of the ACL for the NAT with" ip allow a whole ' you can get unpredictable results. " I suggest using the "road-map sheep/nonat2 permit 20" instead of "allow a whole."
For others, change the config as follows-
!
ALS IP 10
Dialer2 interface source ICMP echo 8.8.8.8
Timeout 30000
frequency 30
Annex IP SLA 10 life never start-time now!
IP route 8.8.8.8 255.255.255.255 permanent dialer2
!
!
nonat2 allowed 10 route map
corresponds to the IP 102
match interface Dialer2
!
sheep allowed 10 route map
corresponds to the IP 102
match interface Dialer1!
IP nat inside source overload map route sheep interface Dialer1
IP nat inside source overload map route nonat2 interface Dialer2!
NAT-TRACK event manager applet
track event 1 show all
order cli action 0.1 'enable '.
action 0.2 wait 2
action command 0.3 cli "clear ip nat translations forced."
action 0.4 syslog msg "Translation NAT cleared after state change of track"
!
-Ginette
-
Satellite L40 - 139 with the combination FN + volume problem
Hello
at first, I want to say sorry for may English. It's so good, but I'll try to explain my probblem.
Yesterday I installed the XP system and everything works fine. After installation I can't press FN with the volume I want to say, some with works of function FN buttons, but some of them don't work. Only those function don't switch (FN + volume) volume of work and increase the volume level up/down(FN+ up/down arrow)Someone know how to fix/repair it?
Marcin
Satellite L40-139 belongs to the * PSL40E * series.
Where did you find the Toshiba XP drivers for this laptop series?To my knowledge at THIS time the XP drivers are not released on the Toshiba driver page and so I guess that a driver missing XP or is not compatible BIOS might be the reason for you question.
I think you have to wait until all drivers XP and BIOS XP will be available for you series!
Greetings
-
How do you géreriez it? Repair returns with the even more serious problem
I sent my Aspire S7 392 for repair of flickering of screen. She is not fixed and updated the BIOS. I fired. He returned with the "replaced LCD module. Now of good unit tests"BUT it has circular spots that appear and disappear when he touched the back of the upper part. I'm so frustrated. Without my computer for 4 weeks. Has started a new case, but I have no confidence in the will of Acer Fixez_ the. Who to contact? Would ask you for replacement?
Solar salvation,
I know the screen is one of the best features of the S7-392 and I can understand the disappointment that you must have if you do not get the most out of it. Could you send me the following information in a private message and let me know how we can help?
Name:
Serial number:
Phone number:
E-mail address:
Thank you
Cory -
Buy the package "all applications" can two people use aplicacioes at the same time without problems?
NO.
The OWNER can activate on 2 computers but use only on one at a time
Cloud license allows 2 activations http://www.adobe.com/legal/licenses-terms.html
-Install on a 2nd computer http://forums.adobe.com/thread/1452292?tstart=0
-Windows or Mac has no importance... 2 on the same operating system or 1 on each
-Two activations may NOT be used at the same time (noted in the link above of the license)
Maybe you are looking for
-
How to get assistance from Mozilla for Firefox with captcha does not?
How the hell can I get any kind of support for Mozilla Firefox that is not some 3rd party site which tells me things are screwed up and it will cost money to repair! My solution is to can firefox but I always liked, but since captcha does not seem to
-
Impossible to update to 10.11.3
I have a macbookpro running 2014 10.11.2. On the upgrade for 10.11.3. the upgrade will take care of the app store, but when the computer reboots, the system freezes. I tried downloading upgrade as well, the same result, the system freezes on reboot.
-
How to remove the google account in lenovo 7000
How to remove google account in lenovo 7000, I don't have possibility of deleted account.pls someone help me.
-
HP - Beats special editionModel: 15-p030nr REF: 7018105 Problem: 3 USB ports do not work. Does not recognize devices plugged into one of the PORTS. I installed Windows 7. I have install all drivers listed on http://support.hp.com/us-en/product/HP-Bea
-
Windows 8 and 8.1 breaks down at random
Windows 8.1 has been crashing on me since I bought it. It's a HP Pavilion TouchSmart with a Quad core AMD 5000 A4 APU 64 bit CPU with Radeon HD Graphics 1. GHz and 4 GB of ram. I have recently reinstalled Windows to try to solve the problem, but it i