Sleeve for 17 "predator?

Anyone need and found a sleeve (not a laptop bag) which corresponds to the 17 predator?  I checked the dimensions of many sleeves, I found on Amazon, and none seems not to work in all dimensions.

Its almost impossible to find the sleeve of 17.3 inches for acer predator because it is thicker than an ordinary laptop. I looked at the round of 17.3 inches for her but impossible to find the one that is the reason why I went fot 18.4 inches and the laptop fits in it. So I advice get you 18.4-inch.

Tags: Acer Predator

Similar Questions

  • Sleeve for Lenovo x230t with battery 6 cells

    I'm having a lot of trouble finding a good fitting sleeve for laptop lenovo x230t which has a battery of 6 cells. If anyone knows a sleeve for it, help would be appreciated

    I finally found the cover for laptop ThinkPad 51J0476 12W - 10.83 "x 12" x 0.98"- neoprene from amazon: http://www.amazon.com/gp/product/B002MVXGM4/ref=oh_details_o00_s00_i00. " Handle fits perfectly. The two zippers zipper down all the way on both sides. For me, I'd prefer just to zip down to halfway on both sides, but that of my preference and is not that annoying the outer material feels good, not very well. The inside is red and feels as well. Not a lot of cushion support, but it will certainly protect from scratches and etc. ; It does what it is supposed to do. It was the best I could find and I am happy with the product. Looks like the price on amazon has increased. I bought it for 14.95 with 3.98 shipping for a total of 18.93. At the moment it is 19.95 with free shipping, not much difference, but a bit. I hope this helps the person who had the same issue as me.

  • Sleeve for ThinkPad X 301

    I'm looking for a sleeve for my Thinkpad X 301. The sleeve I ordered from Lenovo (and recommended by Lenovo for my laptop) was much too big: (http://shop.lenovo.com/SEUILibrary/controller/e/chind/LenovoPortal/de_CH/catalog.workflow:item.detai... Does anyone have a recommendation? Thank you!

    I use a Logitech sleeve 13.3 "Kinetik sleeves. I've had for about a year and it has been tough, easy to clean and has two pockets. Is my x 300 as a dinger on a big dong (IE fits very well)

  • Want to buy sleeves for my Qosmio X 500-02 M

    Can't find anything about it on the forum so thought I might ask. I'm looking for a sleeve that fits my X 500 02-M mobile computer when I get it. I am currently looking at this one:

    http://www.Newegg.com/product/product.aspx?item=N82E16834995754

    But I can't seem to find anyware delivered this model to the Australia. Any thoughts would be greatly appreciated, I came across another run 18.4 "on Ebay, but it is orange and I'm not want on the model.

    Google is your best friend! ;)
    Cases and bags for classic laptop, you will find in every store of PC, but if you want to buy something special I recommend you to check the AMAZON online store.
    I hope that you will find something there.

  • Sleeves for 16' Satellite A505

    Anyone know of a good deal that I can buy, which will adapt the A505-6960? It has an external battery on the back which lift up the lap top a little. I'm looking for a sleeve type case, so I can put it in my book bag, but something that does not scratch as well. Thank you for those who have good advice on a specific type and style of the round.

    Greg G.

    Hello!

    On the Toshiba site, you can search for compatible sleeves:
    http://www.CSD.Toshiba.com => find accessories

    With the part number, you can search with Google to find online shops where you can buy it.
    Or contact an ASP and order the sleeve it. Maybe they can offer other sleeves too. Just ask for this and they will help you.

    Good bye

  • Sleeve for IdeaPad Y480

    Hello world!

    I just buy an IdeaPad Y480 and I would like to buy a sleeve to protect it. Any Suggestions?

    Thank you

    Hello

    Welcome to Lenovo Community

    Below please find the link for the available sleeves
    http://shop.Lenovo.com/us/accessories/carrying-cases/sleeves

    Hope this Helps
    See you soon!

  • Need help finding a specific part for the predator

    I am looking for the metal clip that holds the 2280 m2 card into the top slot (for the 22110 m.2).  There must be somewhere, I don't know where.  Its killing me.

    Ok.  I'm not doubting you, but the only thing that I have to go is the official specification.  I don't have your computer model and I don't have an ssd M.2 22110 to see if it would fix it properly.

    In any case...

    Here is the official specification for G9_791 and G9_792 and B21

  • Drivers for laptop Predator 17 page does not.

    I'm trying to download it from the site web http://acer.com/ac/en/US/content/drivers.

    It is just time runs out on me in any browser I use. Can someone help me with this?

    Hello

    Your link does not work. Try this one:

    http://www.Acer.com/AC/en/us/content/drivers

    What model do you have?

  • Looking for blackBerry smartphones original black neoprene sleeves

    I have amdesperately original Leroux black Neoprene Sleeve for my playbook, the one that says Blackberry on it. Inside is a blue light and the outside is black. I was on a business trip and he lost, I have looked everywhere online and called customer service of blackberry, and nobody knows what im talking about. Someone please help.

    Hi greatdanelover,

    The following link can help provide you with what you are looking for:

    http://us.BlackBerry.com/smartphones/accessories/PlayBook/

    See you soon,.

  • WT-310 - need to slip /sleeve case recommendations

    When I bought the WT310-106, I picked up the Toshiba brand for her case as well.
    Unfortunately, then the box seems good and it is well done, the design is poor.

    It does not correctly, wise there is an inch and a half high margin too large to be moved. The sides have only a few inches of elastic in half top, if the lower half of each side is open.

    This means that the lower corners of the Tablet are not properly protected and the tablet can turn in the case. Therefore the lower corners of the case are crushed by now. The other problem is that put a pen in the provided loop push the Tablet askew. Very poor design.

    Recently, I jumped in PC World to see what they had and was surprised by how little computer case laptop 11.6 "fit the 310 (one!).

    If anyone has a recommendation for a Holster that fits the WT310, maintains computer in place, protects the corners, a hard protection to the screen and soft protection to shock as well as a Pocket/loop/space for a pen?

    It will be transported in a Messenger bag with other junk needs to be quite robust but is not waterproof, I use it at work so no Ganja leaves etc.

    Cheers Chaps

    Hello

    the round of Toshiba measures 1.6 x 22.6 x 20.7 cm and its been for 11.8 as well as 11.6 displays.
    I guess an3rd bias for screens of 11.6 sleeve should be compatible with the TOSHIBA Tablet too.

    So I recommend you seek 11.6 sleeve: for example, I found good Internet offer: sleeve leather Supremery

  • Satellite C660D - recommendation for a good run

    Hello.

    I recently bought a C660D with a 15.6-inch screen. After initially having had problems with connecting wireless down that was resolved with a driver update, that I was very happy with it since.

    I am now looking to buy a sleeve/cover for it and I was wondering if someone could recommend a good?

    Hi Tormod,

    Theoretically, you can buy all the sleeves that you want, but you can also contact a service provider allowed in your country, because they also sell these sleeves for laptop.

    I bought my sleeve for laptop on eBay. It wasn t so much, I know that I paid 20 Euros for m and I convinced.

  • X 1 carbon Gen 4 sleeves

    I just bought a new X 1 carbon (Gen 4) and I'm looking for a sleeve for her. I took the carbon especially because it's so light and small, but unfortunately the official corresponding to the size of the socket of Lenovo (X 1 Ultra socket) is large enough and weighs about half as much as the laptop itself and twice as much as a socket ordinary zip...

    I am looking for a small lightweight neoprene/polyester/whatever sleeve with a zip in which the X1C Gen 4 would fit well. All the recommendations of people who have already been looking for one? Or maybe there's a basic sleeve reversible with the X 1 carbon dimensions provided for Lenovo?

    I carry in my backpack so I just need basic protection.

    Thank you!

    Well well, if anyone interested ist, it's a perfect fit: https://www.caselogic.com/en-us/us/devices/laptop/up-to-13_3-inch/ibira-133-laptop-sleeve-_-ibrs_-_1...

  • Magnetic sleeve prevents MacBook Eve or commissioning

    FYI, when using a magnetic sleeve for my MacBook, I have found that if I tried to wake up or start the laptop with the sitting underneath sleeve (on my lap, for example), then I was unable to wake the portable computer. I also found that if I moved the sleeve below while I was doing something, then she would sometimes put my laptop to sleep while I was in the middle of a task. It seems that the magnet is trick the laptop into thinking he's still closed and so cannot meet the key or trackpad listens. Beware if you buy a sleeve with a magnetic closure, because you should not try to use the laptop on top where right next to the handle!

    You can choose to report this problem to Apple Feedback - product section:

    Return products

    This can help determine if there is something that needs to be done on

    the front-end of their product development or accessory for these items.

    Thanks for the heads-up.

    Good luck & happy computing!

  • Batt 9elements W540, sleeves?

    Hello, I am looking for a lightweight sleeve for my W540 (without charger). As it has the "bump" battery 9 cells, I was wondering if anyone has any experience with the model.

    I prefer the leather, if possible.

    Thank you.

    Hello.

    You have the wrong sleeve for your machine, there is also a 15W sleeve that fits a machine 15 "with the extended battery option.

    ThinkPad 15W sleeve case

    Here's my W520 placed comfortably in one of them.

    Sleeve of 15W + W520

    See you soon!

  • I am interested in the predator AG3-605-UR1H. I have a few questions about it.

    My first question is whether it is possible to buy this model without the graphics card in it. I have a friend who has the same graphics card on his pc and is willing to sell me half price he can pass to a better graphics card.

    My second question is he the same motherboard as the fact of this model: http://us.acer.com/ac/en/US/content/model/DT.SPXAA.022 I would like to know because I think that a few years on the road, I would upgrade to the graphics card.

    I was also interested in this model: http://us.acer.com/ac/en/US/content/model/DT.SPXAA.017

    Why is not available for online purchase? It will be available in the near future?

    inspectorlunge,

    Good questions, let's see if we can get good answers.

    The units in question:

    AG3-605-UR11 / DT. SPXAA.022

    AG3-605-UR1H / DT. SPXAA.021

    AG3-605-UR2F / DT. SPXAA.017

    All our AG3-605 series models come with an adapter installed in them. If you find one of our units that use the same video card you want to get your friend you could use the two together, your overall experience growing.

    Insofar as the same motherboard, Yes, the card mother in all three are the same.

    We have a unit AG3-605 on our Acer store for purchase, Predator G-AG3 - 605 - UR1H Gaming Desktop, if it's where you were looking.

Maybe you are looking for