slide show appear constantly

Similar Questions

• Photos of saved slide show appear with jagged lines

  Media Center

  Photos saved slide show appear with jagged lines like the pic was originally built with LEGO blocks, then smooth. recorded in Media Center-Transition the value NONE appears on the two (Medical Center) computer & TV through a DVD player. What are the causes of the first jagged lines. Thank you

  Hey woodytwoshoes,

  1 how long have you had this problem?

  2. it happens with all registered slideshows?

  Step 1:

  I suggest you to check with another recoded slide show and see if the problem persists or not.

  Step 2:

  Also update the video card drivers and check:

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Kind regards

  Savan - Microsoft technical support.

• Legends of the slide show appear to have boxes around them when played back on mobile devices

  Hello... I searched this problem but could not find a reference - apologies if I have not quite use the right search terms and it has already been answered.

  I have problems with a widget slideshow base - seen on a PC (iMac in this case) the captions of images, navigation buttons and the meter have NOT any visible borders (I have not rubbed or filled the container boxes, other than the nav buttons). However, see the slideshow even on an iPad or iPhone, and there seems to be around the buttons of legend, meter and nav boxes. I would have preferred that there no contours of the visible area.

  The problem page can be seen here (remember, fine on a PC, not very well on a mobile device)

  http://mikehiggs.co.UK/musesite/case-studies.html

  There are two slide shows on the page I tried two different widgets - both have the same problem.

  The strange thing is, I used the same method on the slideshow on the homepage at the top of the page and it works fine.

  If anyone can shed some light on this 'problem' I would appreciate it a lot - I tried all I know at this point.

  Thanks for any help.

  Additive...

  If I change the transitions of the slideshow of 'horizontal' to 'fade' the problem goes away. But I prefer the slide show slide.

  Just thought this extra info can help diagnose the problem.

  Post edited by: MikeHiggs

  I believe that this is caused by a bug error rounded in mobile Safari. If you set a feature of width not no white on the legend, or set the background transparent instead of white color, I expect that it will go away.

• Slide show appears in the preview, but not online?

  Hello everyone

  I "m running Dreamweaver CS3. I'm working on a site of the shop for the products that you see on the race www.proheader.com/alpha.html

  As you can see on this page, there is a large white space under the orange bar produced stars of titles. This is where the flash slideshow is supposed to be. I have uploaded the .swf file in the same directory as the html file. I also downloaded the scripts with the AC_RunActiveContent.js file folder. When I saw the slideshow in DW, it appears, but when I see it on my site, it does not appear. I need to integrate slideshow soon, and help would be greatly appreciated. Thank you very much!

  Hello

  Musik-swf-files, I use the program I described. Slideshow-swf I now produce with DW early or even sometimes today, I work with

  http://www.Flash-slideshow-maker.com/

  where I can add "selfmade" *.mp3, *.wav, and *.wma files or on a CD. Cause you're afraid that YOUR program does not work well, I have done this with your Aleo (with one right now downloaded the trial version)

  http://www.Goldschmiede-Blumberg.de/_SlideshowAleo/slideAleo.php

  and you can see all works fine! Simply, I inserted the generated swf file. Find the source code. Hans G.

• Format slide show Adobe Bridge with Adobe Muse

  When I'm using Adobe Bridge and I go to the review Mode, a slide show appears which is full screen and images look when you drag the. Is it possible to use this slide show format in Adobe Muse?

  You must use the custom coding to do this, try to incorporate the cursors in your Muse site.

  http://www.jssor.com/

  http://Wowslider.com/

  Thank you

  Sanjit

• Slide show that won't go away

  I have a slide show of Muse that will not disappear.  I deleted and uploaded the new files and it always appears on the server.  I deleted the entire server and that it always appears. Ive left Muse, reinstalled and even made the update in 2014 and the slide show appears always even if is not on the design of Muse page.  Any ideas?

  Hi William,.

  You ensure that you download to the folder on the server? In addition, talk to the host and see if they have some sort of server cache that needs to be eliminated.

  - Abhishek Maurya

• Left/right keys for slide show

  Hello.

  I have this slideshow and I need the code for the left and right buttons. The problem is that each symbol (elements of slide show) on the show have their own fade in and fade out. When I click the left/right buttons, they play the symbol showing currently fade and fade the symbol that follows. I tried to adapt the code of this other post that TimJaramillo help me with but... I'm not a savy Javascript/JQuery and it is not a simple thing.

  Here's the code that they tried to adapt:

  // Section options settings
  // Setting variables and arrays
  var currentOption = null; // Index in array_options: 0=a, 1=b, 2=c, 3=d
  var requestOption; // Index in array_options: 0=a, 1=b, 2=c, 3=d
  var array_options = ["option1a_venhoDeOutraIgreja", "option1b_sintoMePerdido","option1c_queroConhecerEsseJesus", "option1d_naoAcreditoEmDeus"];
  var array_optionsBtns = ["sectionOption1a_Btn_venhoDeOutraIgreja", "sectionOption1b_Btn_sintoMePerdido", "sectionOption1c_Btn_queroConhecerEsseJesus", "sectionOption1d_Btn_naoAcreditoEmDeus"]
  // Called by timeline.complete/timeline.speclocation event at end of each Option
  sym.playRequest = function(){
    sym.getSymbol(array_options[requestOption]).play("lead_in");
    currentOption = requestOption;
  }
  // Called on button click
  sym.btnClick = function(request) {
    requestOption = request;
    if(currentOption !=null){
      sym.getSymbol(array_options[currentOption]).play("lead_out");
      sym.getSymbol(array_optionsBtns[currentOption]).play('option_exit');
    }
    else{
      sym.playRequest();
    }
  }
  

  Stadium / compositionReady

  sym.getComposition().getStage().playRequest();
  

  Symbols of fade in/fade out -"default timeline / full

  sym.getComposition().getStage().btnClick(0,1,2,3); // 0,1,2,3 index of array = a,b,c,d
  

  Buttons -"click on

  I also need that, the first time the slide show appears, it automatically plays the first element (1 only the).

  And here is a schematic representation of what I want:

  

  And my ZIP files of project edge.

  Pedro

  Hi Pedro,

  Edit: I just saw that you want the first slide to AutoPlay. You should be able to modify my code to make this happen. If this is not the case, let me know. I also just saw that you want the slide show loop after that the user gets to the far right. It is a simple tweak as well. Let me know if you need help with that.

  Here is an example of work for you. Click the right arrow to display the first slide. Then, click on left or right to display the previous/next slides.

  www.timjaramillo.com/code/Edge/pedro_test/option2b_quemTrabalha.html

  Source:

  www.timjaramillo.com/code/Edge/_source/pedro_test.zip

  Most of the code is similar to a simple image gallery. But since you want to wait outro animations at the end, it's a little trickier. I had to add vars to track the current request and anims.

  Stage.compositionReady code pasted below:

  // vars -----------------------------------------

  Section options settings

  Tables and definition of variables

  var currentOption = null; Index of array_options: 0 = a, 1 = b, 2 = c, 3 = d

  var requestOption; Index of array_options: 0 = a, 1 = b, 2 = c, 3 = d

  var array_options is ['option2b_quemTrabalha_1_presbiterio', 'option2b_quemTrabalha_2_musica', 'option2b_quemTrabalha_3_multimedia'];.

  var array_optionsBtns = ["sectionOptions_article_SlideBtnRight", "sectionOptions_article_SlideBtnLeft"]

  trackIndex var = null;

  // funcs -----------------------------------------

  sym.onClickLeft = function() {}

  If (trackIndex > = 1) {}

  -trackIndex; / / decrement, index

  sym.initArticle (trackIndex);

  }

  }

  sym.onClickRight = function() {}

  first time

  If (trackIndex == null) {}

  init first obj (array index starts at 0)

  trackIndex = 0;

  sym.initArticle (trackIndex);

  } ElseIf (trackIndex< array_options.length-1="">

  trackIndex ++; / / increment the index

  sym.initArticle (trackIndex);

  }

  }

  sym.initArticle = {function (request)}

  requestOption = request;

  If (currentOption! = null) {}

  .play ("lead_out_from_left") sym.getSymbol("option2b_quemTrabalha").getSymbol (array_options [currentOption]);

  }

  else {}

  sym.playRequest ();

  }

  }

  Called by the event of timeline.complete/timeline.speclocation at the end of each Option

  sym.playRequest = function() {}

  .play ("lead_in_from_left") sym.getSymbol("option2b_quemTrabalha").getSymbol (array_options [requestOption]);

  currentOption = requestOption;

  }

  });

• Add a slide show using apDivs - will not focus / clashes with the images.

  Hey guys,.

  I'll be as fast and accurate as possible. I am new to Dreamweaver and I'm having a few problems in my attempts to create a Web site simple portfolio.

  I am trying to add in a base image slideshow using apDivs. I had a look online and found a few fantastic JQuery slideshows, and I ended up adapting it for use on my site;

  http://www.queness.com/post/923/create-a-simple-infinite-carousel-with-jQuery

  I have pictures in the base of my site and I wanted to add the slideshow above them (and the same thing for a couple of YouTube embeded videos too.) I added in an apDiv and placed the code for the slide show inside. This created a layer that goes on top of the image, and I am able to put the code for the slide show into it without any problems (providing the position of the apDiv has the Absolute value).

  {#apDiv1}
  position: absolute;
  top: 419px;
  left: 400px;
  Width: 555px;
  height: 480px;
  z-index: 1;
  }

  The problem I have is lining up the cursed thing. Of course, defining the apDiv absolute positioning is a bad idea, because while it was going on well in a resolution, it is not in another. I tried to change the position of the apDiv for relative and then adding changes to my code;

  {#apDiv1}
  position: relative;

  Width: 555px;
  height: 480px;

  left margin: auto;
  margin-right: auto;
  z-index: 1;
  }

  This centers my slideshow (which is beautiful), but is no longer layers on the top of the image (since it seems to work only when the position is set to absolute.) Instead, the slide show appears below the image rather than on top.

  Is there a way possible, I can keep the apDiv (which contains the slide show) centered while standing on the top of the image? As I said, it will layer on very well when the absolute value, but won't focus. When the relative value, it will center but not layer on top. It is one or the other, and I'm pulling my hair out top at the moment.

  If anyone can give any help, please Please let me know. I've included a Notepad document, including all of my code on the page (including my wacky comments) to the address below, if it helps in any way;

  http://www.box.NET/shared/5nufqc78jbg0mfkb00n5

  Do #container position: relative.  Do Divap1 position: absolute and adjust high/left to place values in the container you want.

  (You realize one) your page is too wide, and b) there is no content on the page, right?

• Problems with slide show.

  First of all, thank you to all those of you who read this forum and take the time to help those of us who are struggling.
  
  I built a slideshow with the Fireworks command menu. I had three files and 1 folder, the "index.html", "player_black.swf", "slideshow.xml" and the folder "scripts". I recorded it in a subfolder of the page that I am building.
  I then imported this slideshow in dreamweaver with the import command. That all went well.
  When I saw the page in my browser, I get the slideshow, but no images. I get the same thing if I 'play' the file in dreamweaver. The layout of the slide show is here, but no slides are displayed.
  
  I'm running out of ideas and seariously need help! Here is my file structure in dreamweaver. I know there must be a simple answer out there. It must be something that I'm on.
  
  SiteName (root)
  |
  -page 1
  |
  -albums of images (contains images of this page)
  -images of the page (contains images cut into slices form Fireworks to build the page)
  -Slideshow file (contains all the files for the slide show I am building)
  -pagename.html (real html page)
  
  |
  -page 2
  |
  

  I fixed it! I'm a newbie here so you must forgive my lack of experience.

  For those of you who might encounter this same problem, here is the answer.

  All the files for your slide show must be in the same folder as the html file which is actually your page.

  Example;
  Below is a structure file for a 'site '.
  Makes you want to put a slow slip on the "photos" page
  If you use the Fireworks slideshow creator, generates 3 files and several folders.
  Folders are the folders that contain the pictures, it appears on the slide show.
  It will also make a new folder named "scripts".
  OK, so lets say your slide show will have two "albums". In the album there are pictures of boats and other album there are pictures of sunsets. Thus, in fireworks, you will appoint the albums "boats" and "sunsets". Œuvres of fire will create the folders called "boats" and "sunsets". With other files.
  So, here are the files you will end up with.
  slideshow. XML (file)
  index.html (file)
  show_black.swf (this is the flash file that you install)
  boats (folder)
  sunsets (folder)
  So, but many files you get depends on how many albums create you. If you have 3 albums, you will have 4 new folders (don't forget about the scripts folder)

  Well, I hope you all! And now we can move on.

  Below is a structure of web page file. When you place these files and folders is very important! You must place them on the same 'level' as a page you, they may not be in a subfolder on this page. Here is an example,

  MyWebPage (file containing your site or your home folder.)
  |
  home page (your index page)
  .. .page images (folder)
  ... home.html
  |
  photos
  .. .page images (folder)
  ... photos.html
  |
  contact
  .. .page images (folder)
  ... contact.html

  Lets say you want to put this slideshow on the "photos" page But you want to build ot a page and the slideshow is displayed as part of your page and not only as a stand-alone with nothing else about this. Here's how I did it the first time and it did not work. I will use the example above.

  MyWebPage (file containing your site or your home folder.)
  |
  home page (your index page)
  .. .page images (folder)
  ... home.html
  |
  photos
  .. .page images (folder)
  ... photos.html
  .. .slide show files (folder)
  ... show_black.swf
  ... index.html
  ... slideshow.xml
  .. .boats (folder)
  .. .sunsets (folder)

  contact
  .. .page images (folder)
  ... contact.html

  As you can see that the slide show files in a subfolder called slide show files. Thay are not in the same folder as the files photo.html. This causes the slideshow not working because they need in the right folder for files.
  Now place the files as in the example below to drag your work.

  MyWebPage (file containing your site or your home folder.)
  |
  home page (your index page)
  .. .page images (folder)
  ... home.html
  |
  photos
  .. .page images (folder)
  ... photos.html
  ... show_black.swf
  ... index.html
  ... slideshow.xml
  .. .boats (folder)
  .. .sunsets (folder)

  contact
  .. .page images (folder)
  ... contact.html

  As you can see the slide show files are no longer in the sub folder. They are in the same folder as the HTML pages. I know this isn't like oganized to research, but it's the only way I found to make the slide show appear within another page. Good luck with your pages. If you need more help post here or email me and I will see if I can help.

• The text added to the Photos in a slide show also will appear if I do a cd/dvd?

  • Adding text to images in a slide show of Photos also appear on a burned cd/dvd?

  • Adding text to images in a slide show of Photos also appear on a burned cd/dvd?

  If you export the slideshow as a video, using the button export, text slide should show in the video. Check the video rendering and play only once, before your burn it.  Sometimes, the background music will be missing.

• The images appear tense when played using the slide show in full screen

  The images appear tense when played using the slide show in full screen in Windows Vista Basic. That means that a picture of resolution 1920 x 1200 appears full screen covering although a 1920 x 1080 image seems letterbox in fullscreen. My screen resolution was put to the native resolution of 1920 x 1080. It is clear that this slide show program only keeping the proportions of the image. Earlier this problem wasn't there. I think that the slide show program addresses in such a way that my monitor could have 16:10 display of report resolution l / h. thanks for giving me a solution.

  This happens usually when the image resolution is high.

  Keep your screen resolution of 1024 x 768 and it should work fine.

• try to do a slide show... pictures do not appear in the monitor while playing

  try to do a slide show. I imported several JPEG files and they appear in the media folder. If I double click on one of them in the media folder, they appear in the control screen, but when I drag them in the video timeline 1 they do not play.  the screen is blank. If I double click on one of them in the timeline that they appear in the monitor, but when I play them that nothing shows in the monitor.any idea why they don't play. ?

  Thank you

  Win7 64

  PreEl10

  Thank you whsprague... got it fixed... it's that darn... Nvidia driver problem somehow my computer for video driver updates without knowing me it... lol... and I found the driver may 2013, installed and everything works well again...

  Thanks for the help

• 100% width slide show button does not appear in the toolbar

  I work with the latest version of Muse - but when you are working with slide shows - the 100% width button does not appear in my toolbar.

  Align is their - but no key width.

  Where is he?

  Hello

  Please ensure that the image of the hero is selected in the slideshow, if you still do not see the 100% button then click on transformation and you'll get the button.

  Please look at the screenshot.

  

  It coould be 2 reasons for the same.

  1. monitor size is too small to display all the options.

  2 muse is not maximized. (Enlarge the window of muse and it will show the button here)

  Concerning

  Vivek

• Joined a Yahoo mail will not appear in the slide show view

  mail Yahoo shows two options of attachments - slideshow and download. Trying to slide show, gear loading keeps spinning and spinning, but never loads using Firefox 8.0.1
  Cache and cookies are cleaned regularly and again later - still no luck. Addons are disabled - still no luck. If Yahoo Customer Care says problem is with Firefox, because it will load on Safari.

  This post I did also suggests a possible workaround solution.

• When my computer is idle, all my images appear in a slide show. How can I disable this?

  MY SCREEN SAVER DOES NOT WORK... WHEN THE COMPUTER IS IDLE, ALL MY PHOTOS ARE IN SLIDE SHOW MODE. IT STOPS WHEN I press THE SPACE BAR. How DO I TROUBLE this PROB?

  original title: MY SCREENSAVER IS NOT WORKING... HOW SHOULD I DO?

  Assuming that you have a version of Windows XP, right-click on an empty space on the desktop and select Properties.  Then click on the tab "Screensaver".  In the drop-down list box, select something other than "My pictures slideshow."  OK your way out.