Slide show which opens full size images in a lightbox?

Similar Questions

• Slide show which opens into the lightbox

  Is it possible to change one of the slideshow widgets so that you can click on the image and have it expand in a corresponding lightbox slideshow? Essentially, what would give you two related shows (one small and one large).

  Thank you

  Hello

  You can use the slideshow Lightbox, but it would show the lightbox effect, once you click on thumbnail. You want the tile must be visible on the page with a larger version of the image, then it will not be a lightbox effect. The best idea would be to use panels or the ToolTip with a smaller version in the outbreak and the close-ups in the target of the widget.

  Thank you

  Sanjit

• Is it possible to embed a slide show in a slideshow? I use the lightbox slideshow and one of my samples is an e-brochure that I would like the Viewer to be able to get away.

  Is it possible to embed a slide show in a slideshow? I use the lightbox slideshow and one of my samples is an e-brochure that I would like the Viewer to be able to get away.

  As slideshow in Muse Widgets can contain images, it is not possible to place another slide show within a slide show.

  However, you can achieve the desired effect by placing a slideshow inside a widget of composition. The widget of composition also offers lightbox, as well as the possibility of placing any content within their target containers (similar to the hero of the slideshow Image).

  Hope that helps.

  See you soon,.

  Vikas

• How a slide show be configured to display images FULL (adjust onscreen) on desk in the Picture Manager folder?

  How can I configure the slideshow that appears on your desktop to show a COMPLETE picture (mounting the image on the screen, rather than cut the image)? I never had this problem in the past. You had just open the folder with the images you want slideshow on your desktop, click on the slideshow and the images in Picture Manager folder will display full screen. Now they are cutting off the coast, rather that to adapt to the screen. There must be a simple setting - but WHERE? Thank you!

  Hi Gary,.

  Find the photos you want to include in your slide show. All images must be located in the same folder.

  a. open the wallpaper by clicking on the Windows key + X , and then select Control Panel. In the search box, type desktop background, and then click Change desktop background.

  b. If the photos you want to use are not in the list of background images, click on the list of the location of the image to view other categories, or click Browse to search for the folder where the photos your computer.

  c. Select the check box for each picture you want to include in your slide show.

  d. click on an element in the picture position list to crop the pictures to fill the screen, adjust the pictures to the screen, stretch the images to fit the screen, tile images, or center the pictures on the screen.

  You can also see the steps in the following Microsoft article: see photos on the desktop, start and the lock screen

  It will be useful.

• Windows 7 Photo Screensaver slide show the maximum number of Images? Recommended file specifications?

  I use Photos as a screensaver as described here:
  • http://Windows.Microsoft.com/
  It seems that if I have too many image files for the photos as screensaver. After the screen saver slide show has worked for at least 20 minutes, it lags behind trying to leave the screen saver and return to the desktop.
  What are the specifications of file recommended for use of photos as a screen saver?
  • file size in MB (which resembles all default values in C:\Windows\Web\Wallpaper
  • dimensions maximum file (which looks like all default values in C:\Windows\Web\Wallpaper
  • types of files (extensions)
  • maximum number of images supported

  When you look at the pictures in my file they all seem to be in the 2 MB and range 1920 x 1200. So my only guess is that having too many is the problem. It does not lag when I change the directory of C:\Windows\Web\Wallpaper. I'm only here a hypothesis, some data of real functional specs would help immensely.

  Stats of the computer

  This built in May 2011 (summer operational solid with zero problems, with the exception of the GAL Photo screen saver when you return to the office)

  OS: Windows 7 Professional 64-bit

  CPU: AMD Phenom II X 6 1100 T 3.30 GHz

  RAM: 16 GB memory DDR3 1600

  Graphics card: Radeon HD 4670 1 GB 128 - bit DDR3 PCI Express 2.0 x 16

  Hello

  -Did you do changes on the computer before this problem?

  Method 1: Run the Microsoft FIXIT from the link and if this resolves the issue.

  Fixed problems with Windows Live Photo Gallery that does not

  http://support.Microsoft.com/mats/windows_photo_and_slideshow_diag/en-us

  Method 2: Follow the steps mentioned below that can help you in the matter of fixing.

  (a) open with Windows Explorer %USERPROFILE%\AppData\Roaming\Microsoft\Windows\Themes\(you will find files there are two: TranscodedWallpaper.jpg and slideshow.ini).
  (b) open slideshow.ini > Remove its content > Save changes.
  (c) delete TranscodedWallpaper.jpg (you can substitute your own file of that name).
  (d) restart the computer.
  (e) re - create the slide show and check if it helps.
   

  Method 3: If the problem persists, I suggest to maintain the computer in clean boot mode and check if the problem persists.

  A clean boot to check if startup item or services to third-party application is causing this issue.
  You can read the following article to configure the computer to boot:
  http://support.Microsoft.com/kb/929135
  Note: After the troubleshooting steps, see step 7 in binding boot is a way of putting your computer to normal startup mode.

  Hope this information helps.

• page does not open full size. I always hit maximize button

  I do not remember how to change the size of the page, so when I opened a new page it still load at half a page instead of full size. I want the page to always load in full size

  Hi Qsilver33,

  To clarify,

  Are you referring to the web page of the internet explore?

  Windows remembers the way a page the last time.

  Open internet explorer, blow it up, and then close. Now, reopen internet explore to see if it worked.

  Same steps are applicable for the folders on the computer.

  You might want to know

  Keyboard shortcuts

  http://Windows.Microsoft.com/en-us/Windows-Vista/keyboard-shortcuts

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to create ePUB with full-size images/pages to adjust according to the device?

  Friendly greetings,

  I tried, for almost two months, to convert/create my 7 books that are printed in electronic books; with the first edition had to be Nook, with Kindle on the list. Unfortunately, I am still working on just get the first one published! And I could really use any assistance to get this figured out. My intention was to publish several weeks ago... now my despair must publish before the weather gets too hot and the children are outdoors most of the time... or at least not later than Easter. (: 0)

  First of all, my books are books of photo/poetry for children of all ages. They were all designed in Photoshop, where I also created images full size for the first eBook. I received the specifications of B & N for the different devices of Nook. In the assumption that it would be better to create the largest files, thus allowing smaller size devices to fit the page accordingly to fit and the most important would not encumber a smaller image, I size my pages to 1280px x 1920px at 72 dpi. (now I hear 150 is standard?)

  My text is included in the image that design is an image = a single page. I've included a version only the full text of the poem/story at the end for those who want to set the text or use a voice reader. I obviously all original, but for the publication they were all saved as jpg.

  After a fight and a lot of frustration, I managed to finish the manuscript for Barnes and Noble Nook press Manuscript Editor. My internet is molasses and so much of this has been done in the wee hours of the morning when the rest of the time zone is asleep. I had only a page with a problem, an additional empty line/space was irreparable. I published and it had been completely sloppy to be published, although the preview looked a-okay. Only on the upper left of each image/page 1/6 was visible in the corner of my laptop to PC or Nook of my Tablet Android App. So I desperately waited another 10 hours, hoping that no one would buy my book Meanwhile, so he could be removed from the sale.

  I downloaded a demo of InDesign CC, and after two weeks of not even being able to create a new single document for some reason any twisted, I bought a month membership. So far, I am not entirely convinced of this creative Cloud malarkey together, as much... that, like I said my internet is slow... it took me nearly 20 hours just to download the software. (It is really difficult to provide records, seriously?) After a cat and a phone call that I can, in theory, now use InDesign.

  I created a new Document for Digital Publishing to the above specifications (1280 x 1920 px). I did rectangle the size of the page placeholders and place one image per page. This usually inserted the image to 50% and I have to select 100%, and then move them if necessary to place.

  So my first question is: is it possible to place an image at 100% without having to do this step further resizing? Or is there another way to place the image in the size of the page without any of these other measures that would be too good.

  Well, after placing several pages/images I have also selected each and went to Options of Export Object and checking the rasterization of Custom and "resize to text Flow.  I then exported ePUB trial to see how it would look. On the PC and tablet in landscape mode it was far better than the other, but about oh 1/3 from the bottom of each page was cut. On the Tablet, I turned to portrait and voila full page. Woohoo! But alas, I don't want to limit it.

  is there something I am doing wrong? Did I miss a step or two somewhere so that the complete picture should appear on the page? I feel like I'm about to turn the page on this thing, but he's stuck in the one after that.

  I would greatly appreciate any insight, advice, help anyone can offer. I ran the gauntlet of Barnes and Noble... cough, cough... support and apparently I ask questions that cannot respond to any press corner rep and the forums out there have no idea about InDesign. It's almost like with all fantastic beautiful screens out there today nobody wants to picture books! How National Geographic?

  Thank you very kindly.

  In case it is necessary: my laptop using Window 7 64 bit Pro, InDesign CC is 64-bit and my 10.1 Android tablet. I can view the EPUB files in the corners for PC and Nook for Android. I also have a Kindle, LumiRead and various other applications on the tablet. I also have someone get a glimpse of the finished epub, if needed, on a Mac, iPad, or Android phone... even if I don't have not one of these. Don't know who has a corner I can look good. Thanks again.

  Q: is it possible to place an image at 100% without having to do this step further resizing?

  Here I think you want your images to fit within size full page automatically. For this, you can try the following steps:

  1. create a new doc

  2. menu Goto object, and then choose image mount options

  3. Select adjust automatically and fitting drowdown, select "adjust the content to the frame. See the screenshot below:

  

  After that, your images should adjust automatically in full page placeholder images. Please let me know if this does not work or if the problem you are experiencing is different and I did not understand your problem correctly.

  Kind regards

  POOJA

• .dng files won't open full-size in PS CC

  I worked with Canon. CR2 files and later Adobe .dng files for years and could always open them in Photoshop. Now, with PS CC, open files as small previews (420 x 280 px) instead of the size. This means that I can not work with my photos! I have not found a setting in bridge or in PS to correct this.

  Have you checked your options of workflow of ACR (blue-link at the bottom of the ACR) to see if there is some resizing, go?

• When I start Internet Explorer and other programs, the page opens half width. How can I fix this so that the page opens full size?

  Screen size problem

  Hello

  Are you you talk to maximize and minimize options by chance?

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/win_tray_window_change_size.mspx?mfr=true

  $C God will not look you over for medals, but for scars. Each winner has scars; I do this either on the same heart

• What video file is open and slide show is chosen video shutter as they play

  If I open my vidoe file and choose slide show I get shutter video but the sound is ok Note: videos from the same folder play well in Windows Media payer and they pay as well in Windows Media Center. My system is Vista Home Premium and has 4 GB of memory and a 320 GB hard drive and a GeForce 220 PCI-E video card I also have equipped with a Win on PCI tv card. Everything seems to work right!  As I said, open the video folder and slide show has chosen so it would play all the videos in the folder as a side show that I get video shutter (it's a lot for the player to see the side)? When you choose slide show, which opens to play them?

  Don't know if this is a real problem because they seem to work in slide show itself well. I can't reproduce your problem.

  I suggest that you could look and see if you can get the updated for your video card drivers. Go to the manufacturer of the video card and download the driver.

  You can get the name of the video card if you don't in Manager devices, graphics cards.

  I hope this helps.

• I want a slide show when you click on any individual image on it goes full screen

  Right now, I have a slideshow that only fills the center of the page, which is how I want. I don't want a slide show full-screen. However, what I want is that when someone clicks on a particular image in this slide show, this image becomes full large and covers the rest of the site, and to return to the normal slide show just click on the image (I guess the same thing, that's how the photos are viewed on Facebook when a thumbnail is clicked) It's kind of what I want).

  Try using/experimenting with Composition Lightbox slideshow Widget.

• full page or image sequence cover or slide show

  Hi all.

  I want to have a slide show or a sequence of images on the cover of a magazine DPS, but if I create a page with the full page image sequence and put the magazine on the top, the newspaper logo disappears when the sequence of images is enabled.

  I can put the logo in Photoshop hollow but that s would take more time and effort.

  No idea no matter who

  General

  Hello

  Create an MSO of the logo (reproduce the logo) and set it to AutoPlay using the Folio Overlay.

  In this way he will always remain on top of your slideshows.

  Hope this helps.  =)

• Transparent footer on slide show full-screen does render does not correctly

  I placed a white box to 80% opacitiy behind the text in my footer for the page footer displays before a slideshow full screen. It looks perfect in Design view, but when I preview the page transparency makes that in the top 20 pixels of the white box. The rest of the transparent white box isn't here, so the text is unreadable in front of the picture (see images).

  The foot is on the master page on a top-level slide show, which is on a content page.

  Thank you!

  

  Hello

  Please check a few possibilities:

  -If no composition is used on the page, try to check if there is space between bordered rectangle border (foot) and the frame of the composition.

  -Check if a footer overlaps with another element on the page

  -Try to reduce the block of text for this text frame border does not falls on rectangle border edges.

  -Preview in browser (use of different browsers)

  -resize the rectangle (with opacity)

  If there is still the same, so please let me know the url of the site.

  Thank you

  Sanjit

• How to prevent the images as a slide show running in the image window when I first connect?

  When I connect firstly in my account photos are displayed as a slide show. I deleted the images from files, but they always show in the images window.

  Hi Asanc,

  Follow the steps below to stop random playback on the Photos app:

  1. Open the Photos app
  2. Press the Windows key + C
  3. Select settings
  4. Select Options
  5. Under pictures of Shuffle on the tile of the app, move the switch to Off

  Let us know if that helps.

• Images of full size in the browser window?

  Hello

  
  

  I have problems trying to replicate a combination of things that I saw on a website (build in Adobe Muse). Web site - www.tatianapavlova.me

  
  

  I'm quite new to dream so please bear with me if it's all relatively simple substance. I looked through a few hours of YouTube videos and not managed to get close to an answer to my problem.
  

  I want to be able to reproduce the scalability of the slideshow, but also have the opportunity to see 'portfolio' of the Web site as soon as I start to scroll from the slide show, regardless of the size, I did my browser window.

  I've included a few screen grabs to illustrate my point a little better that I probably explained above. In IMG1 you will see that my browser window is about half the height of my screen, but as soon as I start scrolling down, I can see the whites of the portfolio section. IMG2 my browser window is almost the size of my screen, but I can still see only the background of slide show of images until I scroll down.

  I guess it's a kind of widget that needs to be added to the page to allow the slide show to do this, however as stated I don't know who he is.

  Once again, my apologies if this is relatively easy, I am new to the program.

  All the advice/help is welcome and appreciated

  Thank you!

  

  Check out this video for more details:

  https://www.YouTube.com/watch?v=gZI_K1TXqOM

  Thank you

  Sanjit