Slides of CP9 KC - cannot add the button

Similar Questions

• Cannot add the printer network Windows 7 64 bit

  My laptop Home Premium 64 - bit of Windows 7 (client) cannot add the network printer that sits on the Windows 7 Ultimate 64 bit computer. A client XP computer easily added the network printer. When you try to add the network printer, the Windows 7 client searches for the driver on the host computer and says "unable to connect to the printer - the operation has failed with error 0x000003e3. I downloaded the driver from the manufacturer of the printer to the client computer. I also disabled the firewall on the computers... Any help would be appreciated.

  Hello

  ·         What is the number and model of the printer that you are using?

  ·         How many computers are connected to the host computer?

  ·         You are on a domain network?

  Method 1:

  You can check the items below that explain how to install a printer in Windows 7.

  Install a printer

  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

  Find and install printer drivers

  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  Method 2:

  a. now follow the document below to add the printer to the Windows 7 computer.

  http://Windows.Microsoft.com/en-us/Windows7/share-a-printer

  b. If the steps above does not help try the procedure below.

  We need to change the port and check. Let us perform the steps below to install this printer and check.

  a. Click Start, click Control Panel, and double click on devices and printers.

  b. click Add a printer.

  c. Select "add a local printer.

  d. Select "create a new port". Select "Local Port" as the port type.

  e. in the "type a port name" box, type the address in the following format.

  \\[IP address of the host computer]------[the share name of the printer]

  And then click Next.

  f. Select the driver in the list of drivers. If no driver available, click the Windows Update button, wait the process finishes and then search for the driver again.

  g. complete the installation.

  For additional help, refer to the article below.

  Printer in Windows problems

  You can also check out the link below that addresses the same issue when you face:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/error-0x000003e3-when-trying-to-install-network/2348b57b-7448-E011-8dfc-68b599b31bf5?msgId=d577ab02-DC48-E011-8dfc-68b599b31bf5

• Cannot configure the buttons on the tablet on Portege M750

  Cannot configure the buttons on the tablet on my M750, where I can donload the drivers to be able to configure them.

  When I touch the botton nothing happens.

  Do you have XP or Vista installed?

  Have you installed Windows yourself using a version of Windows?

• My Satellite A300 cannot recognize the buttons at the top of the page

  I + re-inistalled windows vista and installed everything. They work fine except the buttons that are located above the keyboard. I know that I can verify their status in all programs > Toshiba > utilities > Toshiba Assist, but the problem is that the my notebook cannot recognize the buttons.

  I installed all the software for each hardware but still cannot use the buttons...
  What should I do?

  Have you used the recovery disk when you installed Vista?

  If this isn't the case, you must download and install the Package of added value, which can be downloaded from the Web from Toshiba site in the section support/drivers.

• get the 1726 error: cannot add the port monitor

  get the 1726 error: cannot add the port monitor hp discovery port monitor (hp photosmart 5525 series) running Windows XP, HP Photosmart 5525

  Could not complete the installation.

  Hi Jeff,

  The computer manufacturing must have created a partition on the disk or provided you CD to restore the computer to the way it was when you bought it. If you have a PC clone, then probably you need to reformat your hard drive and reinstall the operating system. If you have an OEM computer (example: HP, Dell, ETC) there is most likely instructions when you turn on/off press F11 or F12 to return the computer to the computer.

  Note: Do nothing until you have all of your backup data.

• Cloud of OPA - add the button to close the questionaire

  Hello

  I want to add in the last page of my questionnaire a button to close it. Unfortunately there is no way to do it through OPA.

  To top it off, add a button using javascript does not work in firefox and chorme. the error is: "Scripts can only close the windows that were opened by him."

  Here is a sample of the javascript used to add the button: $("#submit").after ("< input type ="button"class ="btn, btn-primary"id =" XXX "onclick ="self.close ()"; > ');

  I replaced "self. Close; "by"Window.Close ()"but it did not work.

  Is there another way to do this via OPA?

  You can configure the last screen to make a shipment and redirection to a URL of your choice, this screen may contain some javascript to try to close the window and displays an appropriate message asking the user to close the window if it does not automatically. Most of these problems are because the browsers must keep the user in control to try to prevent security problems.

• Cannot add the header HTML - CFWebstore on CF11

  Hello

  I get the error below on a new installation of CFWebstore v6.6 on CF11. I used a previous version of CFWebstore on CF7 and CF9 without problem. Looking for suggestions...

  Cannot add the HTML header. ColdFusion is unable to add the header specified in the output stream. It's probably because you used to define one of the ColdFusion Cookies of Session or authentication cookie. To do this, please use configuration at the application server level. The error occurred on line 213.

  Thanks in advance for any help!

  Gary

  I found this answer:

  To resolve this issue, connect to Coldfusion Admin, go to the memory Variables and uncheck "Disable the update from Coldfusion cookies using tags/functions of Coldfusion." Memorize your settings, and then restart your Web site.

• Cannot add the vmkernel nic: a specified parameter was not correct. vSphere CLI + ESXi 4

  Hello. I try to add vmknic with frames in my distributed virtual switch.

  I read the vSphere command-line Interface Installation and reference Guideguide:

  "vicfg-vmknic - a-i DHCP"vmk5"

  I see the error message:

  Cannot add the vmkernel nic: a specified parameter was not correct.

  Vim.Host.VirtualNic.Specification.Ip

  What's wrong?

  I tried all the combinations of parameters with the same result.

  Ok! I've found a workaround.

  Since adding a vmkernel remote interface doesn't seem to work with DVS, I simply created one on a standard vSwitch and it then migrated to the DVS. And voila: the value 9000 MTU migrated intact with her! Here are the steps I followed:

  1. put the ESX host into maintenance mode - evacuate VMs manually if necessary

  2 remove the VMKernel iSCSI/NFS to the DVS interface

  3. create a standard virtual switch with no physical cards. He has no need to be a VMKernel VM Networking switch is fine. Make a note of the name you gave to the PortGroup created on the new vSwitch.

  4 using the remote control line, add the new interface vkernel specifying an appropriate jumbo MTU (9000) and the PortGroup on the standard new vSwitch. For example:

  esxcfg - vmknic.pl - Server

  If you get 3 answers, everything works. If you get failures, something has gone wrong. Go back and check that the interface is configured correctly using the command list esxcfg - vmknic.pl-.

  Enjoy!

  M

• How to add the button print on Webhelp in Robohelp 10?

  Can someone please provide instructions to add the button print on Webhelp. I am currently using Robohelp 10. I've seen some suggestions using javascript in the skin, but there isn't a step by step procedure.

  I've been seraching for it for several days. It would be a great help for me. Thank you!

  See point 3 to http://www.grainge.org/pages/snippets/snippets.htm#webhelp

  See www.grainge.org for creating tips and RoboHelp

  

  @petergrainge

• Cannot add the new log file for the 11g database.

  Salvation of DBA
  
  I'm not able to add the log file, I receive the error message when the database is added.
  
  SQL > alter database add logfile group 3 ('/ oracle/DEV/db/apps_st/data/log03a.dbf','/oracle/DEV/db/apps_st/data/log03a.dbf') Re-use of size of 50 m;
  alter database add logfile group 3 ('/ oracle/DEV/db/apps_st/data/log03a.dbf','/oracle/DEV/db/apps_st/data/log03a.dbf') Re-use of 50 m of size
  *
  ERROR on line 1:
  ORA-01505: Error adding log files
  ORA-01577: cannot add the log file ' / oracle/DEV/db/apps_st/data/log03a.dbf'-fichier
  already a part of the database
  
  SQL > select a.group #, a.status, a member of the journal of v$ a, v$ logfile b where a.group # order of b.group = # 1;
  
  GROUP # MEMBER STATUS
  ---------- ---------------------------------------- ----------
  1 ACTIVE /oracle/DEV/db/apps_st/data/log01a.dbf
  1 ACTIVE /oracle/DEV/db/apps_st/data/log01b.dbf
  /Oracle/DEV/db/apps_st/data/log02a.dbf CURRENT 2
  /Oracle/DEV/db/apps_st/data/log02b.dbf CURRENT 2
  
  Kindly help me to add the new log file to my database.
  
  Thank you
  SG

  PGO

  Please see (how can redo log group be dropped when it ever becomes inactive?) [ID] 730827.1).

  Thank you
  Hussein

• Cannot add a button on a quiz slide

  I'm creating a quiz in captivate 5 and I want to add a next button on each slide of the questionnaire. So I went to the Insert > object Standard and option button is grayed. I'm not on amaster Slide where I know that the button cannot be added. I know there are other ways to do this, but it seems logical to then have a back, and submit button on each slide. Thank you!

  The jump key which is on the question slide double up as a button (for review).

  Since you are fairly new to the forum: If the answer to your question, could you please mark as well?

  Lilybiri

• The user interface related problem: cannot add the status buttons

  Hello

  I'm developing a screen where I need the header and status with controls like buttons and the EditFields. Please take a look at this code

  editField = new EditField();
  
        updateButton = new ButtonField("Update");
  
         cancelButton = new ButtonField("Cancel");
  
        /**        * set up Status manager       */       VerticalFieldManager statusVerManager = new VerticalFieldManager();       HorizontalFieldManager statusManager = new HorizontalFieldManager();
  
          /**        * Add fields in status manager        */       statusManager.add(editField);     statusManager.add(updateButton);      statusManager.add(cancelButton);
  
          statusVerManager.add(new SeparatorField());       statusVerManager.add(statusManager);      /**        * Set status as status manager        */       setStatus(statusVerManager);
  

  Here I can see my edit of the status field but may not see a Cancle and update buttons.

  Previously, I have tried with subLayout() for both the Manager but could not display buttons.

  Waiting for your comments on my code. Atleast help me understand what it is wrong.

  Thanks in advance people.

  Hello

  Solved the problem myself.

  Here's the summary I've done.

  1 removedStatusVerManager. In fact, it has been used only to a separator above the horizontal management of State.

  2 called sublayout inside the statusManager and delimited the height and width.

  3. called setLayOutChild() to do my fiedl edit fixed width and height.

  (I had followed procedure until 3 before I had done new is in step 4)

  4. calls the setPositionChild() method. In fact when I throw a child I have defined his position and the position of all the children who will be added in the same manager. So also set the position of other controls of BROTHER with her.

  5. Add the controls in the Manager.

  He spent setStatus. And I am able to make the desired screen.

  Thank you @ekansh for your answers.

• Cannot get the buttons to add or remove parts of a complex table

  I have a form with tables inside tables and need to add/remove lines and swathes of the table, but can't seem to get the buttons to work.  The form can be found here: https://acrobat.com/#d=aS0xCt4bzIRGqip-HBtrXg when I open the form in acrobat and try the buttons, I'm prompted to save the form, but nothing is added/removed.  Finally, I need to fill out a second form with the same data, or else this table would be so complicated.  No idea as to what I'm missing here?

  Karl

  Hello

  1. your form is saved in static form.

  For all / delete lines, forms need to be saved in dynamic PDF.

  2. the syntax of reference for Add/Remove lines won't.

  Use to add lines.

  _ItemRow.addInstance(true);
  

  or to remove lines

  _ItemRow.removeInstance(this.parent.index);
  

• BlackBerry Z10 cannot add the iCloud IMAP e-mail. Weird error message.

  Hello

  Just, I've got my mobile business phone, a BlackBerry Z10 and wanted to add my iCloud service in the personal workspace. The contacts and the synchronization of calendar just fine, but when you add the mail I get this error message:

  "order: b 'CAPABILITY'-online socket error:-too much reading 0.

  Also when you try to add the e-mail as an IMAP account standard account, enter all parameters according to Apple, I always get the error message once he wants to "save and check your settings. I also tried different combinations of ports (587, 25), smtp, SSL and StarTLS. Using the user name with or without the @me.com. Use @icloud.com instead @me.com,... etc. etc. Always get this error message.

  Then I though perhaps administrators blocked this feature, however I was able to add my personal gmail account, which would have been the case if they would block private emails.

  Any help much appreciated!

  Thank you, Christoph

  I have solved the problem now.

  It is not logical to me, but it works.

  Rather than take the path normal through the settings, accounts, add imap, etc.

  I did this:

  1. slide to the left to open the hub

  2. press the button 'More' at the bottom right

  3. tap on settings

  4. type e-mail accounts

  5. tap on add account

  6. tap on advanced

  7. tap on IMAP

  Then follow the normal steps by filling out the form.

  I know that (I think) is in the same place to complete the form only when you go through the steps described in the knowledge base article.

  Still, I can't explain why, but it worked for me. Using the same exact references.

  Thanks for your support tho!

• Add the button?

  So, how is it when I press the menu button the 'Add' button is faded and I cannot click on it. I wanted to add widgets, but it is not letting me press the button. Think of everything, they can help?

  Thank you!

  If it is gray to your screen must be full.  You will need to go to another screen to add the widget or icon you want.  I guess you could delete something also.  I hope this helps.