Slideshow of Bridge CS4 64 bit will not end with the ESC key

Similar Questions

• Windows 7 will not activate with the OEM key, after the failure of HARD drive.

  Hello

  I was recently asked to repair my brother DELL laptop.  The HARD drive failed and the system unusable.  I replaced the HARD drive and installed Windows 7 Home Premium x 64 (earlier version of windows) from my own installation media.  The recovery partition had survived the failure of HARD drive, I would have just cloned that and used, but this was not an option in this case.

  The problem that I am experiencing, is that windows don't will not activate, saying that the key is not valid.  I was told that installing Windows 7 media would work with a retail or an OEM key, but that doesn't seem to be the case.  The key OEM I use, is from the computer it came from originally, and the only material change is the new HARD disk.

  I try to avoid ordering an OEM Dell installation CD, as which costs money (I already have my own installation CD) and takes time (why do they have them available for download?).

  Any help would be greatly appreciated!

  Thank you

  Brian o '

  Here is the information that the Microsoft Genuine Advantage Diagnostic Tool spits out:

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->

  Validation code: 0
  Code of Validation caching online: 0x0
  Windows product key: *-* - QCPVQ - KHRB8-RMV82
  Windows product key hash: + Rj3N34NLM2JqoBO/OzgzTZXgbY =
  Windows product ID: 00359-OEM-8992687-00095
  Windows product ID type: 2
  Windows license Type: OEM SLP
  The Windows OS version: 6.1.7601.2.00010300.1.0.003
  ID: {AC8177E3-D2B0-45ED-B79B-E129894262D3} (1)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows 7 Home Premium
  Architecture: 0 x 00000009
  Build lab: 7601.win7sp1_gdr.130104 - 1431
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 109 n/a
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program may Explorer\iexplore.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->
  Office details: {AC8177E3-D2B0-45ED-B79B-E129894262D3}1.9.0027.06.1.7601.2.00010300.1.0.003x 64*-*-*-*-RMV8200359-OEM-8992687-000952S-1-5-21-1225630707-1574482703-4192685535Dell Inc.. Inspiron N5030 Dell Inc.. A02 20100913000000.000000 + 00032933F07018400F804090409Time(GMT-05:00) Standard is03DELL WN09 109

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.1.7601.17514

  Name: Windows 7 HomePremium edition
  Description: operating system Windows - Windows (r) 7, channel OEM_SLP
  Activation ID: d2c04e90-c3dd-4260-b0f3-f845f5d27d64
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 00359-00178-926-800095-02-1033-7601.0000-0892013
  Installation ID: 004806170012218410865063155553272544088463952332351022
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
  Machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
  Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
  Partial product key: RMV82
  License status: initial grace period
  Time remaining: 43080 minute (s) on (29 day (s))
  Remaining Windows rearm count: 3
  Trust time: 31/03/2013-02:23:35

  Windows Activation Technologies-->
  HrOffline: 0x00000000
  HrOnline: n/a
  Beyond: 0 x 0000000000000000
  Event time stamp: n/a
  ActiveX: Registered, Version: 7.1.7600.16395
  The admin service: recorded, Version: 7.1.7600.16395
  Output beyond bitmask:

  --> HWID data
  Current HWID of Hash: MAAAAAEAAgABAAIAAAABAAAAAgABAAEAeqgI7yp8en9YkLIC/j7Shg44gAGAPUbK

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes
  Windows marker version: 0 x 20001
  OEMID and OEMTableID consistent: Yes
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  APIC DELL WN09
  FACP DELL WN09
  HPET DELL WN09
  MCFG DELL WN09
  WN09 DELL SLIC
  OSFR DELL WN09
  SSDT PmRef CpuPm

  you use an OEM SLP key that only works with the manufacturers recovery media.

  change the product key to that on computers of COA
  Click Start, type slui3, press ENTER.

  Additional information:

  Computers, which are built by large manufacturers provided with pre-installed Windows are supplied with 2 two product keys:

  OEM SLP: This key comes pre-installed in Windows, when it comes to the factory. This key is designed to work with the special instructions isn't on the hardware of this manufacturer. Then, when Windows was installed using the OEM SLP (in factory) Windows 7 key leans on the motherboard and he sees special instructions and activates. (that's why you had no need to turn on your computer after you brought it home)

  COA SLP: it's the product key that you see on the sticker on the side (or at the bottom, [or in the battery compartment]) of your computer. It is a valid product key, but must be used only in certain situations (for example, if the OEM SLP key stops automatic activation for a reason any). The key must be activated by phone. (Note: all manufacturers that use the SLP OEM system are bound by contract to include a certificate of Authenticity sticker (COA), which has a COA SLP key, on the computer)

• Windows activation - new hard drive and reinstalled Windows, but will not work with the product key

  Hi all

  My hard drive died so I put a new in and installed Windows on a drive, but when I have just activated and put my product key does not work. In fact, I get this day by putting in and then it says character not aloud.

  Please can someone help? All I've done is put a new hard drive in but guess that Windows detects that the product key has been used on the old, which explains why it won't work on the new. What should I do to activate the key?

  Thank you

  Richard

  Thanks a lot for your useful replies. I've got in contact with Microsoft and they gave me a key and it worked!

  Thank you

  Richard

• 2602AP will not register with the 5508 controller

  Hello all-

  We have a 5508 controller that manages the HA to about 20 branches - each branch has its own subnet. We have a single branch (subnet) with new 2602 AP who will not register with the controller. All communications to that subnet appear normal and there is no ACL in place between the AP and the controller. The AP is able to resolve the IP address of the controller via DNS and start the registration process, but then timeout. We have installed 2602 AP successfully to other areas of the branch and they fit without any problems - it is a problem only in one branch. I have attached a few debug messages below for a single point of access (it's a production environment, so I analyzed useless info) and also included messages from the console to a different access point (the console AP messages are the same). There are currently 9 AP here and none of them will record this. Any ideas?

  Capwap debug events:

  * spamApTask0: 11 Dec 14:39:32.904: 44:2 b: 03:9 has: Discovery d1:10 request 10.29.9.190:44306

  * spamApTask0: 11 Dec 14:39:32.904: 44:2 b: 03:9 has: d1:10 join priority Processing status = 0, priority 1 of incoming Ap, MaxLrads = 300, joined Aps = 272

  * spamApTask0: 11 Dec 14:39:32.904: 44:2 b: 03:9's: Discovery d1:10 response to 10.29.9.190:44306

  * spamApTask0: 11 Dec 14:39:32.904: 44:2 b: 03:9's: Discovery d1:10 response to 10.29.9.190:44306

  * spamApTask0: 11 Dec 14:39:32.992: 44:2 b: 03:9 has: d1:10 DISCOVERY LWAPP APPLICATION received at 68:ef:bd:8e:48:6f on port "13"

  * spamApTask0: 14:39:32.992 Dec 11: Discovery 44:2 b request: 03:9 has: d1:10 elements in LWAPP of AP supporting CAPWAP

  * spamApTask0: 14:39:42.903 Dec 11: connection of DTLS 44:2 b: 03:9 has: d1:10 not found, creating new connection for 10:29:9:190 (44306) 10:5:13:4 (5246)

  * spamApTask0: 14:57:52.301 Dec 11: DTLS closed connection events receivedserver e8:ba:70:dc:d1:c0 (10:5:13:4 / 5246) client (10:29:9:190 / 44306)

  * spamApTask0: 11 Dec 14:57:52.301: e8:ba:70:dc:d1:c0 no entry there for AP (10:29:9:190 / 44306)

  * spamApTask0: 11 Dec 14:57:52.301: e8:ba:70:dc:d1:c0 entry no. AP exist in the temporary database for 10.29.9.190:44306

  * spamApTask0: 11 Dec 14:57:53.828: 44:2 b: 03:9 has: Discovery d1:10 request 10.29.9.190:44306

  * spamApTask0: 11 Dec 14:57:53.828: 44:2 b: 03:9 has: d1:10 join priority Processing status = 0, priority 1 of incoming Ap, MaxLrads = 300, joined Aps = 272

  * spamApTask0: 11 Dec 14:57:53.828: 44:2 b: 03:9's: Discovery d1:10 response to 10.29.9.190:44306

  * spamApTask0: 11 Dec 14:57:53.828: 44:2 b: 03:9's: Discovery d1:10 response to 10.29.9.190:44306

  * spamApTask0: 11 Dec 14:57:53.916: 44:2 b: 03:9 has: d1:10 DISCOVERY LWAPP APPLICATION received at 68:ef:bd:8e:48:6f on port "13"

  * spamApTask0: 14:57:53.916 Dec 11: Discovery 44:2 b request: 03:9 has: d1:10 elements in LWAPP of AP supporting CAPWAP

  * spamApTask0: 14:58:03.824 Dec 11: connection of DTLS 44:2 b: 03:9 has: d1:10 not found, creating new connection for 10:29:9:190 (44306) 10:5:13:4 (5246)

  Debug Capwap errors:

  * spamApTask0: 11 Dec 15:17:33.715: e8:ba:70:dc:d1:c0 abolition PT 10.29.9.190 which has not been surveyed

  * spamApTask0: 11 Dec 15:17:33.716: e8:ba:70:dc:d1:c0 DTLS connection has been closed

  Debug Capwap Details:

  * spamApTask0: 11 Dec 15:24:29.419: 44:2 b: 03:9 has: d1:10 CAPWAP control received Msg to 10.29.9.190:44306

  * spamApTask0: 11 Dec 15:24:35.542: 44:2 b: 03:9 has: d1:10 CAPWAP control received Msg to 10.29.9.190:44306

  * spamApTask0: 11 Dec 15:24:41.555: 44:2 b: 03:9 has: d1:10 CAPWAP control received Msg to 10.29.9.190:44306

  * spamApTask0: 11 Dec 15:24:49.555: 44:2 b: 03:9 has: d1:10 CAPWAP control received Msg to 10.29.9.190:44306

  * spamApTask0: 11 Dec 15:25:29.420: 44:2 b: 03:9 has: d1:10 CAPWAP control received Msg to 10.29.9.190:44306

  * spamApTask0: 15:25:29.420 Dec 11: connection of DTLS 44:2 b: 03:9's: d1:10 0x1a1703c8 closed by controller

  * spamApTask0: 15:25:29.421 Dec 11: msg closed connection CAPWAP DTLS

  Journal of the Console from the AP:

  Translate "CISCO-CAPWAP - CONTROLLER.ad.pps.k12.va.us"... the domain server (10.29.8.3)

  * 00:00:57.511 Mar 1: % 3-CAPWAP-ERRORLOG: did not get the server DHCP server log settings. [OK]

  * 00:01:10.511 Mar 1: % 3-CAPWAP-ERRORLOG: go join a capwap controller

  * 16:05:56.000 11 dec: % CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 10.5.13.4 peer_port: 5246

  * 16:06:17.495 11 dec: % CDP_PD-2-POWER_LOW: all disabled radios - NEGOTIATED WS-C3560E-24PD (68bc.0c03.8015)

  * 11 Dec 16:06:28.231: DTLS_CLIENT_ERROR:... /CAPWAP/base_capwap/DTLS/base_capwap_dtls_connection_db.c:2051 retransmission count Max reached!

  Kern of logging mechanism

  ^

  Invalid entry % detected at ' ^' marker.

  emergency logging trap

  ^

  Invalid entry % detected at ' ^' marker.

  Kern of logging mechanism

  ^

  Invalid entry % detected at ' ^' marker.

  emergency logging trap

  ^

  Invalid entry % detected at ' ^' marker.

  * 16:06:55.999 11 dec: % DTLS-5-SEND_ALERT: send FATAL: close notify alert at 10.5.13.4:5246

  * 16:06:55.999 3 dec: % CLIENTERRORLOG-3-LWAPP: LWAPP LED Init: incorrect led State 255

  * 16:07:06.367 11 dec: % 3-CAPWAP-ERRORLOG: go join a capwap controller

  * 16:07:07.000 11 dec: % CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 10.5.13.4 peer_port: 5246

  * 11 Dec 16:07:39.151: DTLS_CLIENT_ERROR:... /CAPWAP/base_capwap/DTLS/base_capwap_dtls_connection_db.c:2051 retransmission count Max reached!

  Kern of logging mechanism

  ^

  Invalid entry % detected at ' ^' marker.

  emergency logging trap

  ^

  Invalid entry % detected at ' ^' marker.

  Kern of logging mechanism

  ^

  Invalid entry % detected at ' ^' marker.

  emergency logging trap

  ^

  Invalid entry % detected at ' ^' marker.

  * 16:08:06.999 11 dec: % DTLS-5-SEND_ALERT: send FATAL: close notify alert at 10.5.13.4:5246

  * 16:08:06.999 11 dec: % CLIENTERRORLOG-3-LWAPP: LWAPP LED Init: incorrect led State 255

  * 16:08:17.367 11 dec: % 3-CAPWAP-ERRORLOG: go join a capwap controller

  * 16:08:17.000 11 dec: % CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 10.5.13.4 peer_port: 5246

  *Dec 17 15:53:47.463: %CAPWAP-3-ERRORLOG: Selected MWAR 'IRC-WLC-5508'(index 0).
  *Dec 17 15:53:47.463: %CAPWAP-3-ERRORLOG: Go join a capwap controller
  *Dec 17 15:53:47.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 10.5.13.4 peer_port: 5246
  *Dec 17 15:54:23.131: DTLS_CLIENT_ERROR: ../capwap/base_capwap/dtls/base_capwap_dtls_connection_db.c:2051 Max retransmission count reached!
  

  Get much better.

  WAP has selected the 5508 with good firmware.  WAP sends a JOIN request to 10.5.13.4 but cannot recover anything.

  Firewall?  Routing loop?

  What so-called "remote site", how is it connected to your office?  Dark fiber?  INTERNET SERVICE PROVIDER?

  You know what?  Can you post the output in the following commands:

  1 WAP: sh of stocks;

  2 WLC: sh sysinfo

  Nuts, I should already posed for these info before.

• Microsoft LifeChat LX-3000 will not work with the yahoo chat

  Microsoft LifeChat LX-3000 will not work with the chat of yahoo, but works very well for the team talk and evacuate the systems of conversation, but for some reason he saus that's compatible with windows Word 7 and he rejects as a microphone?

  "Wyodragon" wrote in message News: * e-mail address is removed from the privacy *...

  Microsoft LifeChat LX-3000 will not work with the chat of yahoo, but works very well for the team talk and evacuate the systems of conversation, but for some reason he saus that's compatible with windows Word 7 and he rejects as a microphone?

  The LX-3000 is compatible Windows 7... get the driver from the website of Microsoft Hardware...
   
  http://www.Microsoft.com/hardware/
   
  When you have installed the drivers, open Yahoo Messenger, go to help > configure video and voice...
  
  --

  Mike Hall
  http://msmvps.com/blogs/mikehall/

  Mike Hall MVP - Windows Desktop Experience http://msmvps.com/blogs/mikehall/

• 13 elements will not work with the new camera, it will not be updated raw 8.7.1

  13 elements will not work with the new camera, it will not be updated raw 8.7.1. I downloaded the patch, installed, but the old version is it in elements. Thank you, esther

  Try again a little later. Sometimes the Adobe servers are busy. If you get the same answer, you may need to uninstall and reinstall. Try an alternative link, then confirm with your 24-digit serial number - click here to download PES

• My Hp Pavilion laptop 2244sa g6 does not come with the product key for windows8. Is this normal?

  Hello

  My Hp Pavilion laptop 2244sa g6 does not come with the product key for windows8. Is this normal? I can't see it anywhere, should I worry?

  Some laptops, like my Envy 17-3002ea loan, have the certificate of authenticity Windows hidden in the compartment where the hard drive and the battery are.  First try.

  Other portable latest and which may include yours, have the Windows license key encrypted in the BIOS.  There is a thread on the Microsoft communities that verifies that. The thread is worth reading.

• After you have reinstalled my Window 7 Professional is not activate with the product key, I received with my package & which I used for a long time.

  After you have reinstalled my Window 7 Professional is not activate with the product key, I received with my package & which I used for a long time. I tried to activate using automated phone system, but could not do. What is the solution. I know that this product key I used only on my current desktop & in past I had not faced any problem on reappattage. This time, I had deleted all the parks & reformatted all readers of my Win7 teacher reappattage. This can be a cause of failure of activation?

  Direct activation number: (888) 725-1047

  1-800-936-5700

• [JS, CS4] TextFrame.extractLabel () does not work with the instances of this class

  I have the script, which works very well in CS3. In CS4 (app.version = 6.0.1.532) However, I get an error using extractLabel, after reading a few other a textframe properties:

  frameObject.extractLabel ('name')
  Error: TextFrame.extractLabel () does not work with the instances of this class

  Until the reading of one of the 'normal' properties, such as (frameObject.) content I can call frameObject.extractLabel ('name') without errors, but after "watching" (assign it to a variable in the code, or by getting the value in the javascript console), the content property (or as it seems any normal property) the extractLabel method generates the above error.

  It seems to work to move all frameObject.extractLabel at the beginning of the function calls, but I don't think that I would need to do this.

  It could very well be the case that the label read by extractLabel has no content and never received. Will there be a change in behaviour of CS3 in this sentence? If so, and if this is the reason for the error, is there then a way to determine if the label has been assigned?

  This error is familiar to someone else?

  Best regards

  Andreas

  It works if you use:

  var pgItm = app.activeDocument.textFrames.itemByID(parseInt(myId));
  

  Otherwise, this might work:

  var pgItm = app.activeDocument.pageItems.itemByID(parseInt(myId)).getElements()[0];
  

  Although, generally, itemByID gives you the question no matter what it is as long as there are, so I'm bit puzzled that neither of them will be necessary.

  Dave

• New version will not work with the yahoo toolbar. How can I solve this problem?

  I downloaded the new version of Firefox, and it will not work with my yahoo toolbar more. It worked fine until I updated to the new version. I went back to the old version 16.0 and now he repeats to me my version is obsolete. How can I solve this problem and get the new version to work with my yahoo toolbar?

  To start, make sure you have the latest Yahoo toolbar.
  http://help.Yahoo.com/kb/index?page=content & y = PROD_TOOL & local = en_CA & ID = SLN5044 & print = false

• computer will not start with the disc

  I use vista and my computer does not start because of a corrupted file.

  I put my vista disk in such suggested, but the screen does not move any command of keys to press and just goes round in a loop. So I can't the computer to start and fix.

  I changed the bios to boot from the cd as first choice but still no results.

  can anyone help?

  Could it be that the disk driver does not work like the disk isn't loading? Or the disc will not load because the press any key order is not coming?

  I am old enough and not very technically experienced but this computer has served me well and I have a lot of information that I need to go down there if I have to buy another.

  Any help would be greatly appreciated.

  If you have correctly setting the boot order in the BIOS to CD/DVD first, and the computer does not start, your problem has nothing to do with the driver for the CD/DVD drive. Also running in safe mode or SFC can maybe help you.

  The reason that pilots, safe mode and FCS can help you is the same for all three: boot (if from the hard drive or a CD or DVD) takes place before loading Windows. If it boots from a CD or a bootable DVD, the problem has nothing to do with Windows. It's a hardware problem. I don't know what the problem is, but it is possible that the CD/DVD drive is dead.

  What is wrong can but fixable, but whether it is cost-effective to do so is another matter. It depends on what the problem is. If the CD/DVD player, they are inexpensive, so replacement should not be expensive. Fortunately, it's not like there is a problem with the hard drive, so even if you buy a new computer, you must be able to remove the hard drive from the old computer, put it in an external enclosure and to transfer the data to the new computer.

  Let me add another point: you say "I have a lot of information that I need to get off it if I have to buy another." This suggests that you don't regularly back up your data on an external support. If this is the case, you've played with fire. It is always possible that a hard disk crash, the user error, close to love at first sight, virus attack, even stolen computer, can result in the loss of everything on your drive. As it has often been said, it is not a question of whether you will have a problem, but when.

• InDesign objects are not locked and will not move with the mouse click.

  I rebooted, uninstalled and reinstalled. Objects interact with when the mouse is clicked. The contours of the block came and the object can be selected and changed, however it will not move with a mouse. Objects respond to the arrows when the issue is raised; but it's heavy at best.

  I gave in my computer image. What was the origin of the problem, is now gone. Thanks for your help.

• Nested tables will not align with the primary table

  
  Hi all. Looks like I am facing another obstacle focus on the table. While I was creating one of my pages, I used nested tables to create a column on the left side of the page that will contain my menu secondary, while the other column will hold a flash element and the content of the page.
  
  Although I have inserted tables nested with a spacing of the cell '0' and '0' cell padding and Visual AIDS seem to indicate that the values in the nested table are identical with the primary table who is the holder, the nested table that will contain the film and the page content is not embedded with the table above. It seems to be off by 1-2 pixels or more, but since there will be a right on the image under the menu is quite obvious.
  
  I enclose the code for your information (line 165, 166).
  
  Thank you for your time and your suggestions. I really appreciate it.
  
  

  Saturday, September 16, 2006 15:06:50 + 0000 (UTC), "HTML-Newbie.
  wrote:

  > Discover the link http://www.fastventures.com/dev/test_temp_2col.html and you
  > see the picture under the main menu align with her on the
  > right side.

  Change this:

  
  
  
  

  To do this:

  <> SRC = "img/place_second.jpg" width = "572" height = "200" > "

  
  align = "right" >
  
  <>
  SRC = "img/place_second.jpg" width = "572" height = "200" > "
  

  Gary

• New computer with VISTA 64 bit will not work with Palm OS on TX - no bluetooth

  I bought a new computer without research on versions of Vista 32 bit vs 64 bit and did not discover until I got it up and running I can't install Palm Desktop on it.  My TX is only a couple of months. I don't want to replace it and can not get a right now, bluetooth adapter. What I want to know is: 1. is there another autour than one clumsy bluetooth work? and 2. Palm is working on a compatible version 64-bit?

  There is a big thread on this subject, with the positions in question on Wifi HotSync by TX inside:

  http://forums.Palm.com/Palm/board/message?board.ID=windows_hotsync&thread.ID=17980&jump=true

  WyreNut

  Message relates to: Centro (AT & T)

• My new 6 Iphone will not sync with the computer Windows 10

  Upgrade of the Iphone 4 to 6 s. old phone would sync/backup on Windows 10 PC but new phone will not. I tried many "bugs" found on the internet but nothing has worked so far.

  iOS 9.3.2 requires that you have 12.4 installed iTunes on your computer. If you do not, then it first day.