Slow down a clip in edit catalyst

Similar Questions

• Why can't slow down a clip in imovie 10?

  Why can't slow down a clip in imovie 10?

  How are you trying to do?

• How to slow down a clip in a video in windows movie maker?

  I'm watching my vidios clips in the history book but everything I see a lot of flashing green mix in the clip

  Hello

  Check this link for clear information on the issue:

  http://www.windowsmoviemakers.NET/PapaJohn/175/interlacing.aspx

  It will be useful.

• How to slow down the sound from a video clip to the exact time (keyframes) and values?

  How to slow down the sound from a video clip to the exact time (keyframes) and values?

  I used the timewarp, but the sound is not affected.

  It is to be expected. Only the native time remapping affects sound, but given that EI is not an audio processing application, the quality is terrible. You must use the hearing or a similar program.

  Mylenium

• whenever I have extend the duration of a cross-dissolving it slows down the later clip, why?

  whenever I have extend the duration of a cross-dissolving it slows down the later clip, why?

  Even if you return the timeline?

• End of Cup Video Clip off the power when send you first Pro CC 2014 to effects after 2014 CC and I slowed down with Timewarp?

  When I send a clip from Premiere Pro CC 2014 to after effects CC 2014 and I slowed down with Time warp the clip cut of 75% at the end of the video and display only the first 25% slow.  How can I fix this and how I round it travels in first pro to play the FULL slow motion video clip?

  Try adding effect temporal Deformation on an adjustment layer in AFX, rather than on the video it self.

• Html5 Flash - How can I make a clip from movie internal slow down and stop when it happen a certain group?

  I'm creating a car braking system using flash, and I have a spin of the wheel. I want the wheel to slow down and stop after the brake pedal is pushed to a certain range. I know I could do with frame-by-frame animation but hoped there is a short cut - javascript? If not the party slowing then is the code to do just the internal clip (rotation of the wheel) to stop when it is in a frame. ? Thank you

  You can use the ticker class to create a loop that allow you to control the rotation of the wheel or a framework, TweenJS v0.6.0 API Documentation: Ticker

• Response of mouse slows down when editing

  It is a continuation of a discussion dated dated August 21, 2011 16:26 with suggestions of Bill Gehrke and John Smith, who has recommended how I could speed up edition and made my PC i7 and suggestions to solve the slow response of the mouse .

  My problem:

  After that several clicks of the mouse, the first quick reactions from first Pro CS5 are starting to slow down to a crawl.

  My PC:

  -ASUS P6TWS Professional Motherboard

  -Intel Core i7 920 CPU

  -12 GB OF DDR3 1333 RAM

  -4 HD 1 TB

  -Video card ATI RADEON 4670 1

  -Coolermaster 690 case separate real power 700W

  -LG BlueRay writer

  -Microsoft Wireless Laser Keyboard 6000 v2.0

  -Microsoft Wireless Laser Mouse 6000

  Recommendations:

  1. Disable indexing on your hard drives.
  2. Try wired keyboard and mouse (old style, no USB) with the generic driver for Win7.
  3. Try disabling the two security programs.
  4. Do not use boot drive for what anyone (editing wise) but the OS and applications. Sale video project and media on another quick of HDD or a table.
  5. Try another (more recent AND older) driver for your ATI card.

  Status of the above numbered items:

  1. Indexing is disabled on all drives used for video editing.
  2. The Asus P6T WS Pro motherboard has a combo keyboard and mouse PS2 Connector.  I was trying to use an old PS2 Keyboard and mouse PS2 to replace the Microsoft wireless keyboard/mouse.  This would require a PS2 PS2 male/2 female adapter.  Information on the Internet shows that there is 2 pins to spare on a standard PS2.  These 2 spare pins are used on connectors PS2 combo for the mouse clock and data which I assume is the case for the ASUS motherboard.  This requires a special adapter where regular clock pins and the date the female to PS2 Keyboard and pins of alternatives to the female to PS2 Mouse.  I couldn't so far find such an adapter.
  3. I need to use the Internet for updates of program so I would disconnect the LAN to disable security for the trial.  If security is the issue, I guess it would be to disconnect the LAN and disabling security whenever I'm editing video.
  4. I have 1 TB disks 3 other than the boot drive, one for each video source, audio source and output rendered.  I think that the reader audio source would be best to share with the project file because the audio files are not as demanding on the CPU if treated earlier in Soundbooth.
  5. I'll try different drivers.

  As recommended, the first Pro Benchmark I ran against my i7 PC to conclude that performance was close to the other similarly configured PCs. This confirms that I am dealing with problems of the outdoor unit.  In this case, the interaction of the mouse when editing is the likely suspect.  I'll try a second run after the changes.  I don't know how the files originate in the testbed among my 4 hard drives so that the results may not indicate a better distribution of readers.

  Does anyone can tell where I can get a combo reliable adapter PS2?  Do not share the drive audio source with the project file a better choice than the readers of rendered files or video source?

  John

  > solved by replacing the laser mouse with a PS2 Mouse Wireless

  Just guessing here... but my 'better thinking' is that your problem is not the material of the mouse, but the the mouse software that created the wireless link was not totally compatible with 'something' in Adobe software

  Another option could be a USB mouse

• Asks the plugin noise reduction effect-made clip jerky and slow down after application?

  I apply an effect - the neat video Plugin to reduce noise. for some reason when I apply the effect, playback of the clip is really slow and jerky. Why is this?

  Hi Dragonsfire,

  I'm looking at the rendering time and it's extremely slow, like the clip is 30 secs long 2mins but render time estimate is like 3 hours! My laptop is not the fastest, but it is not no more ancient. Any suggestions on the reduction to make time-no understood them with a much more powerful computer!

  You have met one of the intensive more rendered effects on the stage of post-production. Sorry if you think that something goes wrong. Likely, that's fine, except that it takes very long time to process images with that plugin.

  Here are some tips on the neat video forum:

  The real rendering for your clip speed should be around approximately 2 images per second. This value seems normal for a HD (1920 x 1080) image size and material to the average (you don't mention your hardware specifications). You can speed up a bit by disabling some of these filter options:

  • disable the very low freq, high quality options
  • some of the fixed noise reduction in some or all channels amounts (luminance / chrominance or Y/Cr/Cb) and/or ranges of frequency at 0%
  • reduction of the time filter RADIUS
  • disable the option of adaptive filtering

  These measures allow the filter a little faster, but at the expense of the quality of filtration reduced. Noise reduction is usually a compromise between quality and processing speed. When you need good quality, it makes sense to give some time to the process with the top of the settings page. When that is not necessary, you can use a less accurate and more rapid filtration.

  Thank you

  Kevin

• Editing: slow down

  Recently I am facing a problem that I didn't have before. To develop after I made the tens (or maybe hundreds) small brush fixes all of a sudden everything slows down considerably. Feels like an overload, even if I have a powerful desktop with lots of free memory. LR5, Windows 8.

  It is a known problem in Lightroom. A lot of brushing causes Lightroom to slow down. You would be better to make the brush in Photoshop or Photoshop Elements.

• Windows Live Movie Maker-how access slowed down effect

  movie maker slow?

  Slow Motion is a tool of the mounting base video... I do not understand? Why include a video editing software that only the most basic functions?

  Hey tug luke,.

  1. use Windows movie maker or Windows live movie maker?

  If you use Windows Live Movie Maker it has no available Slow Down effect.

  Only Windows Movie Maker v2.6 has that effect. I recommend that you download Windows Movie Maker 2.6 If you want access to the effect of "slow down, half.

  To make your video more slowly by using this version of Windows Movie Maker, you must use the effect "slow down, half. On the table of the storyboard / timeline, select the video clip, picture, or title to which you want to add the effect. Click on 'Tools' and then click 'effects '. In the "Contents" pane, click the effect you want to add (in this case, "slow down, half"). You can click on 'Play' under the preview monitor to see a preview of what looks like the effect, or simply click and drag the clip to the video or photo.

  Windows Movie Maker 2.6

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=d6ba5972-328e-4df7-8f9d-068fc0f80cfc&displaylang=en

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to slow down a part of a video?

  Hello, I'm a french guy, but I'll try to explain

  I have Imovie 10.1.2 I took a video on my iPhone and I forgot to took it with slow, now I have this video on my Imovie on my mac. I would like to slow down just a part of the video, not all of the videos, as on the iPhone, can you help me?

  Thanks, I await a response

  Rémi

  Press and hold the R button and select the portion of the clip in the timeline you want to slow down. Look in the toolbar and click on the gear icon to see the options of Retiming.

• Firefox slows down - then crashes

  Please can you look on this problem. Firefox slows down, displays an error message and then crashes. When a Web site loads, the circle in the corner of the tab usually turns, and then load website. On a regular basis, the circle stops, and then I see an error message.

  "Shockwave Flash may be busy with her may have stopped responding." You can stop the plug-in now, or you can continue to see if the plugin is going to end. »

  So it is look like my version of Shockwave Flash is obsolete. But this is false, because I have the latest version 15.0.0.

  Update your Shockwave Flash v15.0.0.152 http://get.adobe.com/flashplayer

  In the address bar, type about: crashes. Note: if all the reports are not
  have BP before the numbers, click on it and click submit.

  Using your mouse, Mark the most resent 7-10 crash reports, and
  copy the. Now go to the response below box and Paste the.

  Start Firefox in Safe Mode {web link}
  While you are in safe mode;

  Type of topic: preferences< enter > in the address bar

  Select Advanced > General.
  Find and stop using hardware acceleration.

  Search web sites secure. Are there problems?

  Then restart

  Edit: fixed the first link he could hurt adobe product.

• How can I slow down a video that has been recorded too fast as well as audio, so it looks like a normal speed?

  Hello

  So, I recorded about 40 slides of movie without realizing account than the speed needed adjustment on the projector. Then the audio sounds fast enough. I was wondering how can I slow down a bit without making a sound too slowly? I tried to adapt it to the FCP with the c case, but it make it too slow and makes it still the audio sound like chipmunks. I want to set the audio where it seems normal. I could get out of the video and adjust it in audacity, but I won't do that because then it will take me an eternity to align to the clip in FCP and even then it may not work right. I have attached a small clip for you all to see what I need assistance.

  http://expirebox.com/download/c398dc60df2942d5430084f3f7423f96.html

  Help, please! I thank in advance.

  FCP 10.2.3

  If you disable in the drop c, keep Pitch, you should lose the chipmunk effect.

  Russ

• How to slow down an animated arrow?

  I'm working on a documentary of the history, and I needed an arrow that can move across a map from one place to the other. Fortunately, I found a generator of arrow very good here: http://tinyurl.com/hxygxkf> and it's free, created and offered to the world through a generous soul, called Theolait.

  Theolait arrow Builder is very versatile, with lots of controls - the arrow can be folded into any shape, a curve or a zig - zag, transformed into a line dashed or dotted, etc. In the animation, the arrow appears at the Point A and then travel across the screen to the Point B. exactly what I need.

  Except, unfortunately, even at the slower speed setting the arrow is moving too quickly on the map. It zips all the way across the screen in two seconds. I thought that maybe I could readjust the clip containing the card with the arrow top generator, to slow it down, but I guess that because the card is a fixed image, reprogram it controls are grayed out.

  Is there another way, I might be able to slow down this arrow animation?

  Tom B.

  Select both clips, map and arrow gen and do a compound clip, ⌥ - G