Slow touch detection ID on iOS on iPhone 6s 9.3 more
I updated my iPhone 6 sec more recently for iOS 9.3. Everything is good and smooth except the Touch ID being unreliable as the previous version. It has become less sensitive over time. It unlock the phone, but not as fast as before. There is a delay and found out that this problem is due to the sensitivity of the touch sensor deteriorate due to the iOS 9.3. Sometimes, it works as usual but sometimes it *. Help, please!
iPhone 6 s more, iOS 9.3
Have you ever force reboot the phone by holding down the button sleep and home for 10 seconds, until the Apple logo comes back again?
You won't lose data by resetting, but it can erase some problems after installing new software or applications.
If this does not work, and to ensure that it is not software related, set it back to factory settings without using a backup later. Test your touch screen.
In case it works again, restore from backup, if it is not, the problem may be related to material and the phone must be verified by Apple or an Apple authorized service provider.
Use iTunes to restore your device to factory settings - Support Apple iOS
Apple iPhone - contact Support - support
Tags: iPhone
Similar Questions
-
Touch is not working iOS on iphone 5s 9.3.4
Touchscreen does not work on the lower part of the screen after upgrade to iOS 9.3.4 on iphone 5 s. The touch also works with precision on the rest of the screen. I can't access settings.
Try resetting your device. This will not erase your data stored on that device.
- Press and hold the sleep/wake button
- Press and hold the Home button
- Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.
Alternatively, you can go to settings - general - reset - Reset all settings
If that doesn't work, restore your device to factory settings. Please note that this will delete the data on your device.
Take a look this Apple Support article: use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.
-
Internet will not work after installing iOS on iPhone 9.3 6 more
A few days ago, I installed iOS 9.3 on my iPhone more than 6 s. Although he connects to the internet through safari and google, I can't open all links. Others have this problem?
There is a problem with links in iOS 9.3 and Apple is working on a fix. A new version of the iOS should be available soon. This message summarizes some of the problems and offer some temporary fixes. To disable Javascript in Safari, but this sacrifice functionality with the web browser. Download another browser like Opera has helped others (not the Chrome as he behaves like Safari). I recommend you wait for the fix.
-
Problem of gyroscope with iPhone/iPod Touch 4th generation with iOS 6
We have built an application using AIR SDK 3.4 and are faced with questions only with this device configuration - iPhone/iPod Touch 4th generation with iOS 6
Anyone has had similar problems. For the Gyroscope data, we use this native extension - http://www.ketzler.de/2011/11/adobe-air-gyroscope-native-extension-with-euler-angles-roll-pitch-lacet-pour-ios /
Any help is appreciated.
Thank you.
Yes, the problem is that the Gyroscope consumes lots of CPU, if the update interval is set to a low value.
We managed to solve this problem recently by using the extension of Gyroscope by Distriqt - http://distriqt.com/native-extensions#gyroscope and by setting the interval to update to SENSOR_DELAY_NORMAL (http://extensions.distriqt.com/docs/gyroscope/docs/com/distriqt/extension/gyroscope/Gyrosc ope.html #SENSOR_DELAY_NORMAL).
-
Can someone tell me how to get touch 3D to work on the iphone 6 s? He has never worked?
Tactile 3D is on, but it does not work even on the sensitivity test. It is not set to zoom, or any zoom setting is toggled on. I don't have a cover on her screen. I have reset hard. I am at a loss to know how to operate it.
Hello
The following steps may help:
- If you don't have yet does, first to update your iPhone to the latest version of the software (test and then again before you continue):
- Back up your iPhone via iTunes (you can choose the option to encrypt the backup) and/or via iCloud:
- Restore your iPhone via iTunes (install a new copy of iOS) settings:
- Test if 3D Touch works before restoring your backup:
If the problem persists when your iPhone is restored to factory settings, contact Apple support (mail service may be available) or make a booking Genius Bar in order to have your iPhone checked under warranty:
-
My pro iPad connects to the WIFI, but loses connectivity to drops in use. My other IOS devices (iPhone, macbook, etc.) do not have this problem. Ideas to solve?
Hello BrooklynWM!
I definitely want my iPad to stay connected to the Wi - Fi connection while I use it. Thanks for posting that other iOS and OS X devices have no problem with the connectivity dropping. We can try a few things.
Would first go through the steps listed in this article: If your iPhone, iPad or iPod touch connects to a Wi-Fi - Apple Support Network
Then if it does not help, you can check network settings with this: recommended for the WiFi routers and access - points Apple supported
After trying those, if you still see the drop connectivity, make sure the iPad Pro is updated with iOS 9.3.2 and check to see if the connection when you are in a certain place, time, or one event happening elsewhere in the House.
Best regards.
-
Hello! I had the 10 iOS in iPhone is and it's cool! Di you know if I should get in iPhone 5, or it will get stuck? Thank you
Since iOS 10 is compatible with the iPhone 5, if you have not limited the space remaining on your device, I would recommend installation. Please note that this update is bricking many iPhones, so make sure you have a full backup of your data before you start the installation.
Good luck.
-
Can I install iOS on iPhone 4S 9.3
MY old iPhone 4S doesn't seem to settle the update ios 9.3 in wifi. It is not compatible?
Apple has temporarily removed the update for older devices because of activation problems. It is currently not available for the iPhone 5 s and more.
-
Safari is very slow after downloading the latest IOS on my MacBook Pro
Safari is extremely slow after downloading the latest IOS on my MacBook Pro. Can we do anything?
It was very fast.
IOS is not running on a MacBook Pro. Do you mean that you went to El Capitan?
When Safari is running slowly? When? What sites? Force Quit Safari and then start it again while holding down the SHIFT key. If Safari works as expected, then remove your installed Safari extensions. Restart Safari normally and add your extensions one by one until the slow back. You have now identified the extension at the root of the problem.
-
I want to update to iOS for iPhone form a computer that isn't mine. I do nit want to backup purchases in their itunes library. What should I do?
Perhaps you should consider updating Over The Air. Settings > general > software update.
-
I can't touch 3D to work on my iPhone 6.
I can't touch 3D to work on my iPhone 6. The only time I peek and jump into the screen for example accessibility setting sensitivity. I do something wrong or make me a mistake?
Cannot say by far. If you have already tested the sensitivity in the settings > general > accessibility > ago worked?
If so, then your material is good.
Note that not all apps have touch 3D. (Affects most if not all Apple apps builtins have 3 - d)
Is it just one or more apps? If a single, who is?
-
The real reasons on iphone-stove high 6s more and how to solve? What guarantees do we have to change the device?
Hello, João,.
Thank you for using communities of Apple Support.
I see that you are concerned about the operating temperature of your iPhone. Please take a look at the article linked below support to learn more about keeping your iPhone in its limits of acceptable temperature.
Keep the iPhone, iPad and iPod touch in acceptable operating temperatures
Take care.
-
I'm putting an iPhone my iCloud 6 more and it says no backups available.
I got my iPhone more stolen 6 and I'm trying to set up the new iPhone my iCloud 6 more and it said no backups available.
I can see on my iCloud account, I have a backup. What is the problem?
I guess the iOS which lay on the iPhone 6 that had stolen you was more recent than the one you have on the replacement. Connect the replacement phone to the computer and iTunes. Set up as news and update the iOS. Once you have updated the iOS, go to settings > General > reset > erase content and settings. Which will bring you to the Setup Wizard. From there, start the installation and choose to restore your iCloud backup device.
-
My iPhone 5 c opens more after that I was invited to be updated with iTunes. now the display shows iTunes logo and the USB cable. I have read and applied some tips here, but nothing happened. Any help will be much appreciated. Thank you.
https://discussions.Apple.com/message/30014877#30014877http ://
Read the post from sierrawren . It helped me to fix my phone. Now it works perfectly fine. Hope it can help others too.
-
will be the sim card from the iPhone 6 s made more than 6 s?
will be the sim card from the iPhone 6 s made more than 6 s?
Yes. They use identical sim cards.
Maybe you are looking for
-
When I opened my internet so the type of advertising differenet show my screen that able to do my job. and my pc is too slow it's hi5
-
help Ned with a verification code cause enamel messed up
need help with the verification code
-
problem in the situation in the field of file sharing (rather bad :()
I have a domain and a domain controller (name server:, ip:192.168.3.33) There is a shared folder (common name: ts$) on the server I connect to another computer (he joined the domain, the operating system: windows 7 Professional, ip:192.168.3.112) usi
-
Pull NOMCLUSTER of hash / / get-opinion
$clusters = get - view - viewtype ClusterComputeResource-name of the property$clustershash = @ {}$clusters | % {$clustershash. Add($_.moref.) ToString(), $_. Name)}$clustershashNotice-EEG - viewtype "hostsystem" - summary parent of the name property,
-
New on ESX and just installed on a HP 7900. Had a HDD 2 TB inside. As I am new and I don't know what I'm doing I said to install and everything seems fine.I have also a 500 GB USB HARD drive connected to this machine. How to connect to the HARD dr