Small Question: Question UI, Changing clip duration causing 'freeze' windows (photos included) 7

Similar Questions

• Windows Photo Gallery. How can I change the settings in the Windows Photo Gallery to automatically open the image without going to the index first?

  Windows Photo Gallery.  How can I change the settings in the Windows Photo Gallery to automatically open the image without going to the index first?

  Additional information: there are 2 computers that I use on the first Gallery Photo of Windows will open the image and allow me to use the left and right buttons to scroll through the rest of the photos in the folder, that's what I want.

  On the 2nd computer when I open an image it will open the Windows Photo Gallery in an index with thumbnails of the displayed record.  How can I change so that it opens the same thing as the first computer?

  I did the following on both computers; Right-click on the image and select open with...--> choose the default program--> go--> Program Files, Windows Photo Gallery, but it will be open always differently on computer 2.

  Both computers use Windows Vista 32-bit.

  Thanks in advance.

  Australian salvation,

  This would happen if the file associations are corrupted on the computer, try method to set Photo Gallery Windows as the default program for opening files jpeg or png below image types.

  (a) open default programs by clicking the Start button, click default programs.

  (b) click on associate a type of file or Protocol with a program

  (c) in the following list of file protocol search jpeg and make sure that you have associated with the program that uses it and then check if it works.

  Change the programs that Windows uses by default

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-which-programs-Windows-uses-by-default

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• How can I change the default location on Windows Photo and Scanner Wizard for registration?

  I have a machine that would save photos from an SD card in a folder the same name as the group by the name of photos. That is to say: I want to save a group of images as "Puppyxx", where "xx" is a sequential number appended to the file in the wizard. In the past, the wizard would create a folder called "Puppy" and put all the photos with the same group name in the folder of the puppy. Now, it is dumping all the photos at the root of the "My pictures" folder I'll have to go and manually move the images. We had a problem week last with server space and had to change the wizard to download the pictures on the C:\ drive rather than on the document server. How do I go about changing the default behavior of the registration wizard so that all I have to do is provide a group name, and the wizard name files properly and place them in the appropriate folder?

  Hello Geekgirl34,

  In the wizard, you can specify a folder, rename batch of images, etc.  I do believe however, that the wizard will automatically make a new folder.  You should see "options" or "advanced options", when importing photos.  You can create your new folder and change the name of the worksheet.

  See you soon

• Change the order of pictures in Windows Photo Viewer?

  I was wondering if anyone knows if it is possible to change the order in which Windows Photo Viewer load images? To clarify, if you use a large (or whatever that either size) display of the icon in a folder, when I hit the "next" or the "back" button, rather than display the image to the left or right of the current one, photo viewer load the preceding or beneath it.  Basically the program reads from top to bottom in vertical columns, rather than left to right on a horizontal line. Is it possible to fix this?

  No sorry, there is no configuration for this.

• How to make a popup, menu utilities Windows Moviemaker, smaller if I can change the length of the duration of the images?

  I am trying to extend the duration of the photos that I have in a project.  The Utilities menu appears giving me access to change the duration, but the pop-up window is so great that I can't at the bottom of the pop-up window to save my changes.  How can I make the window appear smaller in order for me to see the whole window on my monitor?

  It can help to reduce the size of the menu
  If you increase the resolution of your screen.

  Windows Vista - get the best display on your monitor
  http://Windows.Microsoft.com/en-us/Windows-Vista/getting-the-best-display-on-your-monitor

  Windows Vista - change the screen resolution
  http://Windows.Microsoft.com/en-us/Windows-Vista/change-screen-resolution

  As for the duration of the Photo...

  The change of setting to: Tools / Options /.
  Advanced... tab applies only to the added clips
  to the timeline * after * you change the setting.

  If you switch to view "Storyboard" and select
  all of the clips as a batch (select one and the type...
  CTRL + A)... you can add the 'Speed Up, Double.
  or "Slow down, half" effect of changing the
  duration. Simply select all clips / right click
  the effect on the menu... Choose...
  Add to storyboard table.

  'Speed Up, Double' cuts the duration of half.

  "Slow Down, half ' double life.

  These effects can be added up to six times.

  If you need finer adjustment...
  the info may be useful:

  To the timeline, you can change the
  duration for each clip manually. Drag the
  Garnish handle left or right to increase or
  reduce the duration. You can see a
  Tip displaying the change.

  Or... just to redo the project after changing
  the long-term: Tools / Options / Advanced
  tab.

• iMovie doesn't let me change still clip duration

  When I try to change the length of a clip duration iMovie still simply ignores the change I made.  Anyone know what the problem could be another r I use software that is more stable?

  There are two ways to change the duration of the clips.

  You can select the video and then click the Info button in the toolbar at the top of the screen (the one that looks like an 'i' with a circle around it), then set the time desired in the box on the right and then press return on your keyboard.

  Another way is to select the clip and drag the edge of the yellow box on the left or right.   It makes it easier if you develop first of all your clip with the

  The slider that is located near the button settings on the right side of your screen.  If you expand a little, sometimes the clip not going to reject the change.

• How to change the duration of the clip in Movie maker

  Im trying to use windows movie maker. does anyone know how to change the duration of the clip. I made a movie of my meetings previous families, but it is different duration time. I'm still doing, help menu does not explain.

  I tried different methods to change the time on the tag's options, but it does not change the duration of the clips

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hi Rickysbiz,

  You can try to cut the clip and take a fresh start or endpoint for the clip to set the duration. The start trim point determines when the clip will start playing, and the end trim point determines when the clip stops in your project and final film.

  To trim a video clip

  1. If you are in the Storyboard view, click, and then on the timeline.

  2. in the timeline panel, click the clip you want to cut.

  3 use the controls to play under the preview monitor to find the point where you want to cut out the clip.

  4 follow these steps:

  ·        When the playback indicator is at the location where you want the video or audio clip selected in replay, clickClip and then click TrimBeginning.

  ·        When the playback indicator is at the location where you want the video or audio clip selected to stop playback, clickClip, and then click TrimEnd.

  You can access the link below to learn more about wrking with clips in Windows Movie maker.

  http://Windows.Microsoft.com/en-us/Windows-Vista/work-with-clips-in-Windows-Movie-Maker

  I hope this helps. Let us know the result.

  Thank you and best regards,

   

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• First Pro gel when you change the duration of a clip on the timeline

  Hello!

  I am currently using the 2015 version of first cc pro. I've been running on this problem where whenever I change the duration of a clip in a timeline (by dragging to make it more or less) the Prime Minister will be held upwards and will need to be restarted in order to regain a part of their normal duties, still not let me change the duration.

  Here's what I tried to do:

  Restart the computer

  The Prime Minister to restart

  Relocation of first

  Restore the computer to factory (single windows) and reinstall the Prime Minister — it is a temporary solution but it started to do it again.

  Other important points:

  NO other software is installed or open on this computer in addition to chrome.

  Specifications of the computer:

  Intel Core i7 6700 K

  16 GB ddr4

  NIVIDIA GTX 960

  120 GB SSD

  2 TB HARD DRIVE

  I know that the computer is not low power, Ive used this for a lot of other jobs and it worked fine but out of nowhere he started to do this. I use this computer for work so it's a pain when it starts to do this, I've included screenshots below of what it does, any help would be appreciated. If you need further information please do not hesitate to ask.

  On a last note, I tried to make the entire timeline with no luck

  Above is that the Prime Minister and remains as when I try to change the duration.

  TIA!

  Chris

  Turn this option off, see if that will make a difference.

  

• Change the duration of multiple clips "as one" clip together?

  Here's my situation:

  I have a song to 127 BPM. I have a music video (muted) to 125 BPM.

  I spent a long time cut out excerpts of the video channels and muliple clips to form a chronology (but with a lot of clips and channels lined up).

  I now want to change the total length of the video clip to match the TEMPO of the song (which I should have done in the first place), but the video is, as noted earlier, sliced upward in mulitple clips in multiple channels. How do I change the duration of all the clips at the same time, where the end and the beginning of the clips still line up to eachother?

  It would be incredibly easy if there was a function non-breeders. Where can I nest multiple clips, change the duration and the UN - nest clips from clips of an overall duration slices changed. (Which is not possible. Yes, I can drag out of the nested charger clips, but the clips will still have the initial term).

  TL; DR: How can I change duration of multiple clips "as one" clip together?

  Never mind. I found an alternative solution. I used an expandable calculator at http://mp3.deepsound.net/eng/samples_calculs.php and time stretched all the clips to match the TEMPO of the song. Now I just need to break all the clips, which can be done one by one, but I found this trick to snap all clips at once: http://vimeo.com/27428526.

  I'll just let this thread remain open for each other with the same problem can find it

• Is there a way to change the duration of a group of clips selected at the same time?

  Hi all

  I work with the good old first 6 on Windows 7.

  Is there a way to change the duration of a group of clips selected at the same time?  If I have a large group of items my editing which are all the same length, once I chose them all in a group, can I change somehow the term chassis number from all the clips at the same time?

  I found other things that can be done to a group of clips at the same time, but I can't find a way to change the duration of a group of selected items.

  Thank you

  Digi

  This feature did not show up to CS5.  With any version prior to that, you can them one at a time.

• How do I change the duration of an image in movie maker

  I can't understand how do!

  The change of setting to: Tools / Options /.
  Advanced... tab applies only to the added clips
  to the timeline * after * you change the setting.

  If you switch to view "Storyboard" and select
  all of the clips as a batch (select one and the type...
  CTRL + A)... you can add the 'Speed Up, Double.
  or "Slow down, half" effect of changing the
  duration. Simply select all clips / right click
  the effect on the menu... Choose...
  Add to storyboard table.

  'Speed Up, Double' cuts the duration of half.

  "Slow Down, half ' double life.

  These effects can be added up to six times.

  If you need finer adjustment...
  the info may be useful:

  You can change the duration for each clip
  manually. Move your pointer autour the
  edge of an element until you see a double red
  arrow. Now, drag the double red arrow...
  you will see if show a ToolTip displays the duration
  train to change.

  Or... just to redo the project after changing
  the long-term: Tools / Options / Advanced
  tab.

  The following articles include some useful information:

  Windows Vista - add to the credits and titles of movie in Windows Movie Maker
  http://Windows.Microsoft.com/en-us/Windows-Vista/Add-movie-titles-and-credits-in-Windows-Movie-Maker

  Windows Vista Movie Maker - work with clips in Windows Movie Maker
  http://Windows.Microsoft.com/en-us/Windows-Vista/work-with-clips-in-Windows-Movie-Maker

  Windows Vista - audio setting in Windows Movie Maker: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/adjusting-audio-in-Windows-Movie-Maker-frequently-asked-questions

• Error when you try to install Windows XP Service Pack 3: "We apologize for the inconvenience, but Windows did not start successfully. A recent hardware or software change might have caused this.

  Windows XP SP3 problem

  Recently, I met a problem with my PC and was forced to use the system recovery. Now I'm back to factory settings and try to install Windows XP Service Pack 3 on my computer. Windows Update won't work for me, that whenever I try to update I get [error number: 0x8024400A]. I think it's because I use Service Pack 2, or that's what I concluded after researching the problem, anyway.

  This is not my real concern, however. Because I could not get the update automatically, I tried to download and install the "Windows XP Service Pack 3 Network Installation Package for IT professionals and developers" myself. The first time I did it, I restarted the PC after the installation and was met with "We apologize for the inconvenience, but Windows did not start successfully. A recent hardware or software change might have caused this. "  I went into safe mode and went to a just system restore point before SP3 was installed, but now I don't know how to install it correctly without encountering this problem after reboot. I'm hardly the easy just stick with SP2 when there are potentially important available updates. How can I get Windows Service Pack 3 is installed on my PC?

  It's certainly interesting!

  If the cause of your problem is to have a HP PC with an AMD processor and an original image on your hard drive (and of course it sounds like this is the case), the solution should be to rename the file intelppm.sys and launch the sp37394.exe patch. Once done, the SP3 file that you downloaded from here:
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=24
  SHOULD work!
  I'm puzzled why there is no intelppm.sys file in your directory C:\WINDOWS\system32\drivers.
  Since you recently returned to square one with your PC ("return to factory settings"), then you may as well run the patch from this page:
  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?cc=us&LC=en&DLC=en&softwareitem=PV-60484-2
  and try the SP3 Setup file again.
  But, first, let's be absolutely sure that we are both using the same terminology. Please answer the following questions:
  1. have you safely backed up ALL your data?
  2. what method did you use to ride "back to factory settings? I think that your choices have been a destructive restore (full) and a (partial) non-destructive recovery. The first erases the disk and leave you with a pristine image and NOTHING ELSE (which means that all of your programs and data get deleted). The other (which does not always correctly) is supposed to leave programs and data intact.

• Windows Movie Maker-how to change the duration of the picture in a project

  Duration of the image in Windows Movie Maker

  Using windows movie how can maker, I change the duration of the photo on a project that has already been registered?

  Windows Live Movie Maker WLMP Project file?
  Try to select (highlight) a clip and go for...
  Change the tab and select duration

  Vista Movie Maker 6?... See more...

  Recorded in what format?

  . WMV movie file? You cannot change the
  duration of the photos.

  . Project MSWMM file? See the following...

  The change of setting to: Tools / Options /.
  Advanced... tab applies only to the added clips
  to the timeline * after * you change the setting.

  If you switch to view "Storyboard" and select
  all of the clips as a batch (select one and the type...
  CTRL + A)... you can add the 'Speed Up, Double.
  or "Slow down, half" effect of changing the
  duration. Simply select all clips / right click
  the effect on the menu... Choose...
  Add to storyboard table.

  'Speed Up, Double' cuts the duration of half.

  "Slow Down, half ' double life.

  These effects can be added up to six times.

  If you need finer adjustment...
  the info may be useful:

  To the timeline, you can change the
  duration for each clip manually. Drag the
  Garnish handle left or right to increase or
  reduce the duration. You can see a
  Tip displaying the change.

  Or... just to redo the project after changing
  the long-term: Tools / Options / Advanced
  tab.

• Cannot change the duration for still images?

  I have a bunch of stills in my Timeline that are of the same duration. I click with the right button on the first and select speed/time and change it if nothing happens. If I drag the clip on a new layer, I'm able to change the duration. Is there a way to change the individual duration of still images when they are already placed in the Timeline?

  Thank you.

  Right-click on the clip and select the speed/duration.  Don't forget to check the box for ripple edit, move the creeping Clips.    You can select and change multiple clips at "drawing", a box (marquee tool) around the appropriate clips, then right click on for speed/duration.

• I want to import any small part of MP4 long clip. Can I cut the part I want beforee I import it? Jut import little clip

  I want to import any small part of MP4 long clip. Can I cut the part I want beforee I import it? Jut import little clip

  These are my own productions of the hour and a half and I want to participate just 5 minutes. What I have to import all this or can I cut it before.

  If I have to import it. How can I remove unused rest

  Look at the function EDIT here. Copy /Paste

  How to use QuickTime Player - Apple Support