small question standard dvd menu nav...

Similar Questions

• Time to DVD Menu Video DVD Maker is not the same when the DVD is played.

  I'm using Win7 x 64, Windows Live Movie Maker and DVD creation.

  I have a built in Movie Maker movie, I use DVD Maker to put it on DVD. I chose the theme of the "video wall" for the project.  I have a secondary video I use a background video and an MP3 track that I use DVD audio Menu.

  Simple details of the problem:
  My real video plays Fine, but my video 'DVD Menu' give me issues.

  Everything works perfectly when I "Preview" the film inside the creation of DVD. Background video and audio play in their entirety. However, when I burn the DVD, but the video freezes EXACTLY at one minute while the Audio continues to play in its entirety. I tried to make the video and audio of the exact same length 3 minutes, 14seconds.

  How can I get the video DVD Menu to play to an end with the audio track?

  Intricate details of the problem:

  Initially, I met a problem with the video DVD Menu from 15 seconds in the video rather than at the beginning and then a loop after about 15 seconds. The preview reflects, as did the test DVD I burned of the project.

  To resolve this problem, I modified two elements of the XML file that is used for my theme. InputStart Offset (I set to 0.0, then the video starts at the beginning) and the MenuEndTime for the intro (I updated 195000 to account for the entire video). With these values in place, the preview was able to display the video for its entire duration (at the same time as the audio track). However when I check the DVD on a DVD player, read it in Media Center, or even on a Macbook, the Menu of the DVD video background freezes a clearly mentions mark a minute.

  Examining the physical files engraved on the DVD that I discovered that the DVD menu appears as a video named VTS_01_0.VOB. I can see this video using Realplayer (and VLC) and the duration was EXACTLY what I see in the Menu of the DVD. The background cut video to mark it exactly a minute.

  The problem seems to me that the encoding of the DVD is not even including anything after this mark one minute for the background video.

  I've experimented with change other elements of the file XML in DVD Maker in an effort to solve the problem but have had no success. I currently suspect that the problem is NOT in the XML file for the project as it appears in the overview of creating DVDs very well. The problem may lie in the encoding settings used by DVD Maker to burn media physically.

  Someone saw values that I need to change and where for this project to work?

  Thank you in advance for your help!

  Hi Dialtone76,

  I suggest you take a look at some of the items below with a few troubleshooting for your question.

  Check your video settings:

  Change Windows DVD Maker DVD-Video settings

  It could be caused by a video filter if you are using:

  Video filters in Windows DVD Maker: frequently asked questions

  Solve problems with creating a DVD-video using Windows DVD creation

  I hope this helps!

• DVD Menu with animation does not start

  I have the DVD menu with background animated and submenues that are built in the same way but the animation and the sound does not start, what is the problem?

  In sound Previewmode opens, but not the animation of backdround when exporting the project for even the sound of the file does not start.

  These problems may be due to corruption of project or odd causes. If you continue this, I create a small test project and add main menu and a sub. See if it works.

• Editing DVD menu

  A disillusioned by the extent of supply of pre-defined menu in the 'Street' 9 Prel version and refusing to be held hostage by Adobe 'More' offers, I decided to open the world of editing DVD menu.  I downloaded excellent PDF of Chuck Engel on the subject (is there an updated to version?-his discussion is centered around Version 2, although for the most part, his notes of this version on how to build menus seems to be quite applicable to Prel version9; for example, the basic syntax for naming layers has not changed).

  One thing that I noticed when you browse the directory of DVD menus

  Adobe Premiere Elements 9-> model DVD-> DVD Menu name

  Is that most of the model structures use the dimension in pixels PAL SD (640 X 575) as opposed to NTSC (648 X 480).  Is there a reason for this?  There are models of skeleton for the main four formats (SD-NTSC, wide screen NTSC, PAL - SD and widescreen PAL) and it would seem, at least superficially, as the pixel dimensions PAL rather than NTSC pixels dimensions, would result only in a size slightly more big portrait of any menu that displays prepared in the framework of these constructions may deduce that the tops and bottoms of the menus made using construction PAL would be slightly truncated.

  Of course, if we're still using text and graphics NTSC guides, isn't a problem.  My questions is: in most of menu presets offered by Adobe with its core product, most of them seems to use the pixel SD PAL rather than NTSC dimensions dimensions.

  Someone has experienced difficulties with menus developed according to the definitions of the PAL and used in a NTSC format... incorrect menu size, strange apparitions, etc and much much more, why would have produced layer of Adobe package with so can PAL models menu if they were not used in the NTSC environment?

  Thank you...

  I got so into it, I have a jump strongly consider in the Premiere Pro arean and apparently the menu system it is somewhat similar to what we are discussing here.  Yes?

  Menus in pre and again (the app creation than ships / installs with PrPro) are very similar. The difference is that still does no semi-automatic creation, so you'll need, say a main Menu, then as many Menus Scene_Selection, as it takes. There is no Menu CD-ROMs in again, as before. Menu naming conventions are much, much less important in yet.

  The reason of ' all Scene_Selection Menus...» "is because you manually bind your buttons to your assets. Navigation is carried out manually, you need as much S_S Menus as you need buttons. Say you have 20 chapters (or 20 deadlines) and the Menu you have chosen no more, or have built, has 5 buttons scenes/chapters, then would need you 4 people. They may be essentially the same, except maybe a next and previous button. The first would not be a precedent (but only one button of main Menu), the following two would have a following and the previous, and the last would not have a next button. GER is part automatically, as it goes to market, or DISABLE these keys and creates the number of Menus S_S since only a 'master' in the Set Menu. In again, YOU do it. Although there are more "hand work", there is a lot more power. In the DVD plug., you can do almost anything in yet, where the pre is very limited. In addition, with a few creative "trick Tower," you can move a lot of restrictions the DVD specs. You will not have broken the rules, but if done correctly, will convince your users that you have.

  If you migrate to yet, I highly recommend that get you a copy of the great book of Jeff Bellune, The easy Guide Adobe EncoreDVD 2.0-Focal, Focal Press. Yes, it's for an older version, but because it is still adheres to the DVD plug., everything in this book apply to Encore CS5. Now, the most recent still will have more features, such as Adobe Dynamic Link, which appeared only in one version of EncoreDVD 2.0, the version CS2 Production Studio. Also, the creation of comics has been added, but with a few exceptions, is identical with regard to the creation of a DVD. Jeff you how to navigate almost everything that can be done, and much, much more. The little "tricks" are worth the price of the book.

  Good luck and happy creating,

  Hunt

• Workflow for creating a project that can be burned to Blu - ray and standard DVD?

  Hello

  I have a project of 20 minutes and I create a unique simple menu with a 'play' button. I would like to create once and be able to burn a Blu - ray 1080 p as a standard DVD. Is this possible?

  Thank you

  You may need to restore the original no first transcoded files.

  By the way: what is your source material? Dynamic creation/AE links, an m4v?

  When still transcode "now" for the DVD, it replaces the originals with the transcoded files.

  When you click right/CtrlClick file from the Project menu, under the greyed "transcode now" you will find "restore original".

  If you do this, you should be able to transcode for Blu - Ray.

  I usually work the other way around, I do Blu - Ray first and then the DVD. Since I create all Menus in 1920 x 1080 and downward revision is better than scaling ;-)
  - and thank you for the training in English alongside.

  So if you have your transcoding settings (menu project - files-law transcoding - settings / ctrl-click-) for both Blu - Ray and DVD set up and do not use transcoding "now" - have all and go to the menu to build immediately, you should be able to build both the Blu - Ray and DVD.

• Make blu - ray discs with the content of the standard dvd in Encore CS5

  Given that blu - ray 25 gb discs have become affordable, I would like to take advantage of the increased capacity of the content of the standard DVD on them.

  In a Word, I would put about 8 hours of flow 8000 720 X 480 video on a disc blu - ray 25 GB with no transcoding.  If I said that my project is a DVD I can tell it to "do not transcode" my property, but as soon as I change the option on Blu - ray, I have a wide range of Hi Def only options or automatic transcoding.  This is much more than 25 GB of the file size.  I can do this in TMP GENÇ TMPGEnc works, I can specify each track or not to transcode, and what bitrate etc. and then burn a blu - ray disc-compatible with the standard def content-but my menu options are more limited than in the still and the work process is slower.   I'd rather that in again if possible.  Is there a way to do that in Encore CS5?

  Stan Jones wrote:

  The problem for me is the reason why you do not get "do not transcode" for a DVD file apparently valid, just because you make a Bluray disc.  I wonder if you change the image size in the properties of transcoding bluray.  I just show him the "do not transcode" for a non-transcoded avi file and also a previously transcoded m2v.

  all my videos that I coded for this and the last project had a black frame around them. for some reason any capture has not quite completely filled the entire box. not a BIG deal, but in the video effect > motion > scale I changed them all to 103 to 105, and I think that this IS why with my workflow wanted to transcode. so I just jumped the man in the middle and in first, like mpeg to preserve all the stops of chapter and chapter names.

• I am trying to build a DVD menu, but whenever I click on the button "Toggle the display of the menu" options I get no picture and I am unable to create a menu. Can someone help me with this?

  I am trying to build a DVD menu, but whenever I click on the button "Toggle the display of the menu" options I get no picture and I am unable to create a menu. Can someone help me with this?

  You need to install the library separately:

  http://helpx.Adobe.com/Encore/using/download-library-content.html

• Looking for an Adobe Encore download (or any other Adobe application create a DVD-menue)

  Hey guys,.
  
  

  I need to create a DVD-Menue and I guess the best tool of Adobe for it is still.

  But I am not able to download the application anymore, am I? It seems that Adobe has recently removed all CC apps

  and there is no CC Version for Adobe Encore.

  If this is true, is there a function any compareable oder App (perhaps inside the PremierePro)!

  
  I am woking on a Mac and I'm already a user of CC.

  Thanks for your help.

  Hi Norman,

  This link can help you CS6 still not installed with creative cloud

  Rayyan

• How to make a standard DVD of still Images in the correct proportions on the DVD?

  The Premier Pro CC 2014 Apple MacBook Pro 10.10.5 DVD Superdrive Samsung PX2370 Dual monitors

  It comes to make a slideshow of lightroom still images on a standard DVD.

  If I choose:

  New project form - DV

  Preferences - Still Image duration - 30 seconds 3 pictures

  Export - MPEG2-DVD - DV NTSC 720 X 480 NTSC 29.97 STANDARD 4:3

  Time line report Correct Veritical Aspect full screen

  Program the Panel - Aspect Ratio Correct Horizontal black Bars

  Queue - MPEG2-DVD NTSC DV

  The sequence settings: unless the default scale image size is selected in the General preferences

  The image is very much out of proportion with or without zoom

  Tried several presets, that does not

  Scale to the size of the selected image

  New project created with all the settings above

  Including the default scale to the size of the image

  Image in the window of the program format is Correct

  The sequence presented without change settings

  Custom - 29, 97-3988 x 2649 pixel square progressive 29.97 Drop Frame

  Export settings - NTSC 720 x 480 widescreen

  Successful of the queue

  New project-DVD 720 x 480 29.97

  Import the Aspect Ratio of Correct time line

  Play DVDs on Mac - good reading of DVD on standard DVD player or Playstation

  Image format - incorrect image tool large horizontal black Bars

  Vertical - top of the picture cut off

  First of all, I'd do the widescreen dvd.

  I would like to start with a normal of 1920 x 1080 1.0 and progressive.

  Put all my photos (no scale to the size of the image) reduce manually to fit the screen or correct the composition.

  When finished exporting to mpeg2-dvd widescreen ntsc.

  Load the file in again and burn to dvd.

• Menu nav Bootstrap BC does not

  Hello world

  I do a menu nav Bootstrap on Bc and I have 3 pages, index, about and location and add links to the menu module v2.

  But wen I click on home, any location or nothing happends, I opened the inspect mode on google chrome and links to the pages are in the tags < a > from the menu but wen, we click on the menu, nothing happends.

  Here is the link: Homepage

  Not sure why it doesn't work.

  The two path name and file link are now correct, and pages exist in the right folders

  While on the home page, if I click with the right button on about bind it work to open in a new tab or a new page.' if I take off the parts in bold the link, it works on a left click (but you lose your blowdry)

  data-toggle = "dropdown" class = "menu drop-down-toggle"> ABOUT US

  Let's see if that anyone gives ideas.

• DVD menu in still DVD markers in the timeline

  How can I use the DVD markers on the timeline in Premiere Pro (therefore also in again) to generate a DVD menu in Encore. In first pro 2, the included DVD creation DVD markers are presenting as a DVD menu automatically.

  Although this starts to become squarely in the wheelhouse of the Forum yet, let's try this.

  No drag and drop a marker. You open Menu in the editor Panel of securities (Dbl-Click top in the project Panel). Here, you can link your buttons for the chapter with the Pickwhip (little spiral icon), located in the properties panel, in the link.

  Hope that help, if not, maybe a MOD can this branch to the Forum again, which is very good and very active.

  Hunt

• Web - URL to DVD-Menu link

  Is this possible with Encore CS6 to link a URL with an element in a DVD Menu?

  When you insert the DVD in a computer or a DVD player with webfunctionality and by clicking on this menu item, the web browser with the specified URL must be open.

  Thanks in advance!

  N ° if you export as flash, burn the Flash disk, and open on a computer, then you may have web links. But this isn't a "DVD".

  You can have different content on a DVD (in the ROM section) that computers can access, but it does not interact with the program/DVD menus as such. You can put a message from text in a menu asking the user how to access the section of Rome. In fact, you could put the export in flash in the section of Rome.

• Adding video to a DVD Menu

  Hello world

  I am trying to create a DVD Menu. I want a video to loop through the menu, but I can't find out how to do this. Do I have to make the menu as a video file, with the video file play on (say for example supported mov), and then create the buttons around the mov? I guess I have to configure the menu looping? Is to do with a file menu imported from photoshop, I use the layers as placeholders for my buttons anyway.

  See you soon

  Chris

  I am looking for a way to get the video in a box on a layer of photoshop.

  There is no such thing. It is inherent in the DVD specification. You can have only one video of BG with all the motion already baked in. As Stan mentioned, at best you can exploit the functionality of creating thumbnails of yet to an extent, but all the rest should be created in a publication / video editing program.

  Mylenium

• Examples of a SWF with DVD-menu? (CS4)

  I'm still no Adobe Encore CS4 users. However, the German version of Adobe Premiere CS4 test does not to me to use the program again. I need to create a SWF with a DVD menu, here I have the finished file to connect to the encryption software must integrate.

  Before you buy first now, I want to see only if the SWF file with encryption software has worked.

  Somewhere I can download a sample file to SWF format with DVD menu? (Download flv and progessiver). In the menu a link must exist also in a web page. Or if someone can create for me quickly such a sample file. Two films with 5 seconds of game time. The menu, selects for movies and the menu is also a link to a web page.

  I would be very grateful for this help.
  (Excuse for English is not perfect.) I come from Germany).

  Mike

  You might be better off buying Flash for it.

• Small Question: Does the Inspiron 530 comes standard with an IDE or SATA DVD Drive.

  Specifically this one: http://configure.us.dell.com/dellstore/config.aspx?c=us&l=en&s=eep&cs=6096&eep_orig_cs=6097&oc=RDDWDGX&link_number=17970705&dgc=CJ&cid=24471&lid=566643

  TIA