Workflow for creating a project that can be burned to Blu - ray and standard DVD?

Similar Questions

• How can I burn a Blu - Ray disc with menu?

  I have a project of 38 minutes composed mainly of footage HD (.m2ts. MP4 and some. MI/GAL). I try to make the project to Blu - Ray with Premiere elements 12, it takes about an hour to reach 98% with the message "Media encoding", then switches to "Compilation of media" and freezes there (I let it go for 6 hours with no end in sight). Manager tasks indicates that it uses not no matter what CPU cycles, while using up to 96% of the CPU before reaching this point. I was able to make this project on a DVD, folders on my HARD and AVCHD disc on a DVD successfully.

  For a test, I tried with the same results, a project of 1 minute. It wasn't until I removed the disc menu I could burn a Blu - Ray disc. I'm under the project on a PC with Windows 7 Home Premium, 64 bit, an AMD Athlon II x 4 2900 Mhz, 4 cores, 4 logical processors with 4 GB of RAM, processor 635. I found a number of references to the completion of 98%, but no real solution. Any help would be appreciated as I would like to produce a record high definition with menus...

  Success. Doubling of memory up to 8 GB has done the job. I was able to burn a Blu - Ray with the disc menu and beautiful results (the video is of good quality). I guess that the step "compilation media" requires a significant amount of memory for Blu - Ray.

  Surprisingly, it does not speed up the rendering process, but it must allow me to burn bigger projects in the future.

  Thanks to all those who have contributed with great suggestions...

• How can I burn a Blu Ray disc OR how do I reinstall again?

  I still use and now on the CC version there is NO version yet.  I tried to use the encoder, but it does not actually appear, allow me to make a file that I can use to play a Blu Ray.  In an attempt to reload the old version of CS6 first creative cloud won't let me get of the old version, or even the old version first.   I want to know is

  1. once the Encoder files are "made" what do I do to actually BURN them on a DVD or a BLU Ray.

  Or

  2. how or WHERE I can get the old version of first or?

  Hi John,.

  This link might help: CS6 still not installed with creative cloud

  Kind regards

  Sheena

• Creation of blu - ray and DVD standard of same video project - issue of menus

  Hello

  I have a video project, I intend to distribute on blu - ray and standard DVD. I plan create all menus and buttons for the blu - ray disc first. Can I just reduce the menus and buttons in again when I go to create the DVD standard? Or better, I'll recreate the standard DVD menus in Photoshop? Someone else to create the menus same br and standard DVDs? Any tips? I'm using CS5. Thank you.

  Cheers, Steve

  I would certainly agree with Jim's response above too.

  The problem with trying to use the same image is not massively different resolution (1920 x 1080 from 720 x 480), but also the size of the pixels.

  BD uses square pixels and what you design is what you get in the disc - DVD on the other hand uses non-square pixels and it can be a nightmare to design if you try at the scale of the images of high Resolutiom down to SD

  The SPHL button are also different - BD requires a separate layer for each State of the button to coloiurs up to 256 while DVD gives you the complete package on 2 bits of an image indexed with a total of 3 corridors.

  I would definitely say to create separate menus for each project.

• can I burn a bly - ray in a folder like I can with a DVD?

  Pre10, win7 64

  can I burn a blu - ray to a foleder as I do with a DVD so that once it is fully coded I can burn bly - ray dics of the file in the folder, rather than having to encode them again what me same time can.

  I coded a project as a file m2t to 1920 x 1440 and registered, but my burning program wouldn't recognize it (Roxio Creator 2010) as it acknowledges the Video_TS files.

  Thank you

  I think it must be version 5 to manage Blu - Ray.

  See you soon,.

  --

  Neale

  Insanity is hereditary, get you your children

• Looking for adobe certified companies that can create a web site of muse with java and PHP for me

  Looking for adobe certified companies that can create a web site of muse with java and PHP for me

  Relationship problems he...

  1: nothing like the Adobe Certified companies

  2: sites of Muse do no PHP support.

• Create a model that can be replicated, but will not show changes in the original model, which occurs in any comps duplicated from it?

  I imported a doc I - 4 layers. Then I dragged these 4 layers in a new comp - comp1. I would like to reproduce this model so that I can try different things using these same 4 layers. But when I duplicate the comp I did - comp 2 - any change I make appear in comp1. How can I create a model that can be duplicated - but will not show changes in the original model, which occurs in any comps duplicated from it? Thank you very much!

  (CS5.5)

  It is a common misunderstanding when you start working in Ae. It takes time to get used to, and even veterans are still this error from time to time. Here's the thing, you have to get in your head: your project Panel is where your source material is, and the timeline is the place where there is a representation of this source. This means that if you duplicate an item in your timeline (particularly relevant for the precomps) it will duplicate a copy, not the source. so, if change you it - it will change all instances of this copy. If you want to duplicate a precomp and create another source, you will need to do it in a 4 step operation:

  1. duplicate your precomp in the timeline (you got that day)
  2. Select the source of this copy in the project Panel (currently the same precomp)-right click on the-> precomp 'reveal the source layer project.
  3. duplicate the precomp selected in the project Panel
  4. replace the copy in your panel mounting with the duplicate of the Source Panel (shortcut - Ctrl + alt + / when both are selected, or drag it to double with pressing Alt)

  what you are really duplicate the precomp twice - once in the project window and once in the timeline, and then one link to the other.

• Is it possible to create a folder that can hide files automatically, when they are copied in it?

  Hello!!!

  Is it possible to create a folder that can hide files automatically, when they are copied in it? I mean how to program a folder so that everything that he would automatically become hidden? I would be very grateful...

  Is it possible to create a folder that can hide files automatically, when they are copied in it?

  Yes. A sort of roundabout.

  For this example, create a folder on your C drive named HideTest.

  Download http://winsupport.org/utilities/freedos-choice.html Choice.Exe (click on the link to download the utility program near the bottom of the page. "And save it in the C:\HideTest folder).

  Open Notepad and then copy and paste the following text in it:

  Off @Echo

  : All
  Set FilesToHide = No.

  : GoToDir
  C:
  cd\HideTest

  : Top
  CLS
  IF FilesToHide %! Is Yes! Attrib *. * + H

  : Choice
  Choice.Exe /c:YN t:Y, 30 are looking for files to hide
  If ErrorLevel 2 Goto: exit

  : MakeList
  Dir > TempList.Txt

  : CheckFiles
  Set FilesToHide = No.
  Find.Exe "0 file (s)' TempList.Txt
  If ErrorLevel 1 Set FilesToHide = Yes
  If exist TempList.Txt Del TempList.Txt

  : Loop
  Goto: Top

  : Output
  Set FilesToHide =
  If exist TempList.Txt Del TempList.Txt
  Output

  Click on file, then save under...

  Go to C:\HideTest

  Name the file Hide.Bat

  Click Save

  Close Notepad

  Open Windows Explorer

  Go to C:\Documents and Settings\UserName\Start where user_name is your own username.

  In the right pane, right click, select New, and then click shortcut.

  Click Browse, and then navigate to C:\HideTest and click on Hide.Bat, click Next.

  Type a new name or accept the default name and click Finish.

  Right-click on the newly created shortcut, and click Properties.

  Change the race: from the normal window to reduced.

  Click on apply, and then click Ok.

  Restart your computer.

  Note: In the line above Choice.Exe c:YN t:Y, 30 are looking for files to hide, 30 is the number of seconds it will wait before checking the new files. This can be from 1 to 99.

  Edit: Just to satisfy my curiosity, why do you do this?

• How do I create a stensil that can be added in different files adobe Reader?

  I want to create a stencil that can be used in multiple files adobe for purposes of quality control. Be useful if someone helps out me on that.

  Thanks for your comments... Could you please guide me on creating a stensil and its use in acrobat reader... Also I would like to know if we can import the file into adobe reader Acrobat reader...

• Required: a portable charger for an iPhone 4 that can be used in Germany and the United States

  Required: a portable charger for an iPhone 4 that can be used in Germany and the United States

  Does anyone have recommendations?

  The original charger is International, all you need is a converter of pin code.

• I just remdered and recorded an intro I would like to use for all my projects, it is saved in a (* perl) file and is the only option to save in this format.  "When I try to open this file and start a new project using tha the intro file, I get an error.

  I just made and recorded an intro I would like to use for all my projects, it is saved in a (* perl) file and is the only option to save in this format.  When I try to open this file and start a new project using tha the intro file, I get an error "the file is not a supported file or codex is not installed.  How can that be, I made the file using this program and he does'nt recognize files it creates?  Please advise... Thanks /.

  grethell

  What version of Premiere Elements you are using and on what computer operating system is running?

  You cannot import a project file (.prel) in another.

  For now, generalize choice

  a. export your Timeline (your intro) content to a file saved on the hard drive of the computer. And then import that

  file in new projects by using the new project add Media/files and folders. See publish + Share/computer/and the other

  choices here to generate this file intro for later use in other projects.

  b. you can set up what is called a dummy projects - this is a project with nothing other than the intro file. And, at all times

  you want to use the intro, you open one of these saved dummy projects and add your media sources.

  A lot of things to discuss. Please fill in some details more and then we can refine the answer for your particular situation.

  Thank you.

  RTA

• First Adobe elements 12 - export ready the chronology of the project, the AVCHD files in a separate folder for burning on Blu Ray disc with other software?

  Hi, can anyone help please.  This is the first time I've used this forum.

  I use the first 12 items, a PC, 64-bit, Windows 7, to high power.

  Just started to hack AVCHD in this software.

  I would like to know if it is possible to export topped with AVCHD files in a folder somewhere else (which were imported in the project calendar), so that I can burn AVCHD trimmed (not in the form of a 'project') of Blu Ray disc files (using another software that I know that works to burn video files to Blu Ray disc).

  Kathy

  There is no export of Premiere Elements (any version) which will give you a file extensions .m2ts or. MTS. .M2ts and .mts are extensions of file that represents the container format that envelope the AVCHD video, and any audio compression file has.

  The .mp4 should serve your purpose... destiny using the file to burn it to Blu - ray disc format on say Blu - ray, copy the disc Blu - ray and edition BDMV folder video file in the file/STREAM BDMV folder (which is a .m2ts file).

  But what we could try (think it will work) to work around the problem

  1. export your Timeline with the publication + share/computer/AVCHD with presets = MP4 H.264 1920 x 1080 p 25.

  2. to the hard disk of the export of this mp4 saving location, then simply rename the mp4 to MTS or m2ts file extension.

  If you send this file to burn it to the disc Blu - ray to Blu - ray disc format, double check that this person software supports import of .m2ts and. MTS.

  Is the recipient of this emphasis on mts or m2ts file?

  Please read and review, maybe try it like a mini series of tests.  Feel free to ask if you have any questions about the foregoing.

  RTA

• PRE10 project burn as blu - ray but will not burn on DVD.

  I created a project of still images in PRE10 with 30 NTSC-HDV-HDV 1080i settings.  I burned the project as a blu - ray player, and it turned out great.  I tried to burn the same project on a DVD and it goes through the process of encoding very well.  However, when it comes to actually burn it to disc it fills about 5% and then abruptly ends saying the burn is completed even if none of the files are written to the DVD (it is always empty).  The same thing happens when I try to burn the project to a folder (no files are created).  I created other projects with this setting and can't seem to burn to blu - ray or DVD.  Any ideas on why this is happening?

  Welcome to the forum.

  As a test, and perhaps as a viable production flow, can you share your HD Timeline to an AVI DV widescreen file? This process completed, giving you a DV - AVI Type II removal w / 16-bit 48 kHz PCM/WAV multiplexed into a single file?

  If this is the case, then the new project, choose NTSC or PAL, depending on where you live, DV Widescreen project w / 48 KHz Audio. Import this DV - AVI file in the new project. Use the SD value of your choice to create Menus, make your chapter markers and marker Menu, with no marker to stop at the end of the timeline Menu. Burning this project to record and test with a software DVD player. Does it work?

  If your still Images have been scaled for an HD (your BD project) project correctly, there should be no need to re - fit the DVD, but if they were imported at full resolution of the camera, then you should follow the advice of Neale. Although the burnt end comic book project, have tons of unused pixels is a real load on your system, and when you have to down-scale considerably for the DVD project, it may be that more than the computer can handle.

  Good luck and please report on how will this test.

  Hunt

• How can I play a Blu - ray disc

  Original title:?

  How can I play a blu - ray disc

  You need key components to play a Blu - ray disc. You need a Blu - ray drive for your computer, which can be purchased in electronic stores, if your computer did not come with one. You also need the Blu - ray playback software. Personally, I use Cyberlink PowerDVD as my go - to for playback of Blu - ray discs on my own computer, but there are a handful of other solutions. The reason main I like Cyberlink is that after having tried a variety of other solutions, he was the one who seemed to be most reliable and use fewer computer resources during playback. Here's a more detailed explanation of How to play Blu-ray discs on Windows.

• Bugs in export a Blu - Ray on a DVD project

  Hi all. I am fairly new with yet, but I just spent the last week to set up a project quite complex and generated an Encocre blu - ray player. It worked out great. Now I have been asked from the same client to export the exact same project to a NTSC DVD. Most of my possessions are images HD and AE comps. I do not want to rebuild the entire project to low resolution and I know that there is a way to do it. So I changed the setting of the project from the design view of Blu - Ray to DVD authoring mode. In the build Panel, I change the output format of DVD Image and DVD and choose a destination folder. Yet to start coding for several hours of my stuff, but then an error message appears and everything he says is still "fail" and that the encoding does not. I tried twice. This is the first time that I want to make a real DVD. I've only used for sofar Blu - ray yet. What I am doing wrong? I must be missing something really Basic. Help!

  Joel

  You have invalid references to transcode old, most likely. Sometimes still don't do things and fails to remove its own old transcodes for the creation of the new. You may need to manually clean up the sources of the project directory. Check especially for audio. Desp you could of course just run lack of space at a time given...

  Mylenium