Smart see question 'Adjust column width is activated. "

Similar Questions

• How to adjust column widths individual classic SQL report

  Hello

  I use Oracle APEX v4.2 with IE8 browser and basically tries to adjust widths of individual columns in my classic SQL report. Basically, I have three columns I want to spacing, so that the width of the entire region for the report is used, but am not sure how to proceed.

  I drilled in individual columns and specified the column widths as the element, but in vain.

  Would appreciate help on how to do this for each column and hope that I do not need to change the model of report (if possible).

  Thank you.

  Tony.

  Tony F. says:

  I use Oracle APEX v4.2 with IE8 browser and basically tries to adjust widths of individual columns in my classic SQL report. Basically, I have three columns I want to spacing, so that the width of the entire region for the report is used, but am not sure how to proceed.

  There is an element of uncertainty in what we suggest as well, because you have not specified the theme and the report of model that is used. This information is required for any question of formatting or the visual layout.

  I drilled in individual columns and specified the column widths as the element, but in vain.

  Report in some themes templates may be missing in the #COLUMN_WIDTH substitution string # required for use of the declarative column widths, as shown here: Re: width of column in reports

  I don't know why it would be missing from a theme of so-called "modern" (perhaps the lack of documentation affects even the Oracle theme designers), but you can add it to the models listed in this thread.

  Width of the element applies only to controls on a form in a table.

  Would appreciate help on how to do this for each column and hope that I do not need to change the model of report (if possible).

  This can be done using selectors CSS attribute (for the themes of quirks mode non-traditional, because you are using a legacy version of IE). Add a style sheet in CSS Inline property page:

  #ALIAS,
  td[headers="ALIAS"] {
  width: 40%;
  }
  

  where the ALIAS value in the attribute selector matches the required column alias, and the width property specifies the column dimension required and the units.

  Note that the percentage widths will be compared to the width of the report table. Therefore, it may be necessary to also specify widths (100%) for the table of report and its components. Exactly how is based on the report, the region and the page templates and theme used, information that was not provided.

• Auto adjusts the width of the Table column

  Hello no,.

  Happy new year... I do application with sql database, report, I made a table on labview. When I select the different query it retrieves data accordingly.

  Here, I want to adjust the column width according to the name of the header. y at - it an option for?

  or want to make a logic?

  Like this

  

• Adjust the column widths in the pages by using the 3 column template

  In CS4, I load the value default 3-column HTML Template (3 liquid column, header and footer). I make a few changes to the size of the container, some background colors in the sidebars, each of the three columns make editable (I put in each column value, then use Insert, model of combo box object).  I have to save it as a TPL file.

  I then create a new HTML page using this template.

  I want three columns - but I want to vary the width of them.  I try to edit the css for .thrColLiqHdr #mainContent for example, but get the message "this change should change the code which is locked by a model or a translator. The changes will be rejected. "I have quite a few pages that need three variable columns.  How can I make this work?

  And a second question... when I open 3-column model mentioned above, the central section 'main content' starts lower down that two sidebars - how do I "pull" it upward with the other two and to avoid the two supervised a fall?

  Sample modified TPL file attached as a .txt file.  The system did not like downloading a TPL file, even if it is not listed as a banned file type.

  You want each individual page to have editable column widths?  You would have to do that in this way-

  1. move the editable region in the head of the template UNDER the embedded CSS

  2. record the model and this change to propagate to your pages

  3. on each page of each child, incorporate a new stylesheet in the editable area in the head to set the column to the desired width

  Simple as pie.

• How to set up excel column width

  I use the ExcelRpt_SetCellRangeAttribute function to set the width of a cell in excel.

  What vale I should switch to set the width for example 50, I tried to transmit values, but his does not work.

  After passing the values'm specifying the column containing the cell is hidden.

  pls help me

  Hello!

  I modified the sample project "excel2000dem.prj" come with the installation of LabWindows/CVI to see if I can adjust the width of the column that you have requested.

  Following the partial code successfully set the column width to 15.0 points in MS Excel 2003.

  //----------------------------------------------------------------------------------------------------------------------------------------------------------------------

  #define EXCEL_ARRAY_OF_CELLS "A2:H11".

  ...

  public static ExcelObj_App ExcelAppHandle = 0;
  public static ExcelObj_Workbooks ExcelWorkbooksHandle = 0;
  public static ExcelObj_Workbook ExcelWorkbookHandle = 0;
  public static ExcelObj_Window ExcelWindowHandle = 0;
  public static ExcelObj_Sheets ExcelSheetsHandle = 0;
  public static ExcelObj_Worksheet ExcelWorksheetHandle = 0;
  public static ExcelObj_Range ExcelRangeHandle = 0;

  public static MyCellRangeV VARIANT;

  ....... (I assume that you have an open Excel application and an active workbook already)...

  {

  Get the sheets in the active workbook
  error = Excel_GetProperty (ExcelAppHandle, NULL, Excel_AppSheets, CAVT_OBJHANDLE, & ExcelSheetsHandle);
                 
  Get the first worksheet
  error = Excel_SheetsItem (ExcelSheetsHandle, NULL, CA_VariantInt (1), & ExcelWorksheetHandle);
         
  The first sheet Active - should already be active
  error = Excel_WorksheetActivate (ExcelWorksheetHandle, NULL);

  New range open to the worksheet
  error = CA_VariantSetCString (& MyCellRangeV, EXCEL_ARRAY_OF_CELLS);
  error = Excel_WorksheetRange (ExcelWorksheetHandle, NULL, MyCellRangeV, CA_DEFAULT_VAL, & ExcelRangeHandle);

  Make the range Active
  error = Excel_RangeActivate (ExcelRangeHandle, & ErrorInfo, NULL);

  Set column width
  error = Excel_SetProperty (ExcelRangeHandle, & ErrorInfo, Excel_RangeColumnWidth, CAVT_DOUBLE, 15.0);

  ..........
  }

  //-----------------------------------------------------------------------------------------------------------------------------------------------------------------------

  Let us know if it works for you.

• Column width set to 0 when printing to PDF format

  Oracle Application Express Version: 4.2.0.00.27

  Apex listener Version: 2.0

  We have a classic report with 20 columns. Out of them, few are conditional.

  We use attributes of the print to print the report in PDF format. The problem with the PDF and printed, it keeps the column width of all the columns in the PDF file, even if they are hidden. We put the column width for all columns of 20 in the print attributes section.

  Can we set the column width to 0 in the PDF output for columns that have hidden due to the State?

  HI - so what you are trying to accomplish? The conditional columns are not included in the PDF file. And the column width for the PDF file is set as a percentage of the available space. So I guess that what you need is for the remaining columns, i.e. those who are included, to fill the available space, but is not because even if the conditional columns are not displayed, they still use place. Unfortunately, there is currently no way to conditionally set the column width, or update the width of the columns according to the conditions. You can try your own custom report layout, or use the APIs of printing for export and under certain conditions using different presentations.

  I'll take a good score to see if we can improve the logic using the layouts of integrated report to be a little smarter on the use of space when the columns are excluded under certain conditions.

  Kind regards
  Marc

• Table column widths

  Hello
  I'm using DW8 and not using codes. I insert a table with 1 row and 2 columns. Enter the text to the left and to the right. No problem. Can adjust the column widths easily. Now, add another line or even another table. Also with two columns. Put an image in the two columns. Problem is that the first line, I created aligns on the column of the second row widths or table (the one with images). How to enable the column widths vary from one line to the other?
  Thank you, TOm

  Tom Hersh wrote:
  > Hello Nadia,.
  > I do not fear contracting cells or expansion when something is in them.
  > Do I wonder is on the line above maybe or under a row of somehting in there.
  > Say a row has two columns with something in the column on the right and left. Now
  > say you add a row on top, also with two columns. Now, let's say I want to put
  > something in the upper left corner which differs in width the thing in the
  > lower left. And something different right top to bottom right.
  > He insists on keeping the width of the two cells in the bottom row. I don't
  > see why the column in the upper line widths align the column widths of the
  > the bottom row.
  > I don't know if I was clear. IThanks, Tom
  >
  This is how works an array. The width of a column will be the same of
  up and down. The only way around that is to divide the column
  inside a specific line, but this isn't something you want to let
  away with.

  Or you can create a separate table, three lines, single cell at the top or
  background.

  --
  Bonnie
  in California
  8 ^ )

• lock the column widths

  Greetings,
  
  I have implemented different templates in dreamweaver with editable regions and pages. However, when I add or remove content, my columns automatically adjust and shake my overall design. This also occurs when you change these elements contribute to distance in.
  
  is there a way to lock the column widths in dreamweaver so that they adjust automatically?
  
  Thanks in advance,
  

  Yes. Do not use tables. Or build tables that are destined to collapse
  all about their content, keeping their shape. What you have
  described, it is simply how behave in HTML tables.

  If you used a "Assistant" HTML (that is, the one written by ImageReady, or)
  Fireworks) in the process, then you probably have tables that are filled
  with HTML not only incorrect but also neck - and rowspans. The combination of
  the two will undoubtedly aggravate the problem - to see why I say that, read this
  page-

  http://apptools.com/rants/spans.php

  To get specific feedback on how to sort your tables (including jet
  take out them and start over to recommendations), please post a link to one of your
  pages.

  --
  Murray - ICQ 71997575
  Adobe Community Expert
  (If you * MUST * write me, don't don't LAUGH when you do!)
  ==================
  http://www.dreamweavermx-templates.com - template Triage!
  http://www.projectseven.com/go - DW FAQs, tutorials & resources
  http://www.dwfaq.com - DW FAQs, tutorials & resources
  http://www.macromedia.com/support/search/ - Macromedia (MM) Technotes
  ==================

  "macrotn" wrote in message
  News:eiiie7$CLF$1@forums. Macromedia.com...
  > greetings,
  >
  > I have implemented different templates in editable with dreamweaver and pages
  > regions
  > . However, when I add or remove content, my columns adjust automatically
  > and
  > shake my overall design. This also occurs when you change these remote
  > in
  > contribute.
  >
  > is it possible to lock the column widths in dreamweaver so that they don't
  > automatically adjust?
  >
  > Thanks in advance,.
  >
  >

• Column width of the mailbox in the Mail of Sierra application

  Hello everyone,

  After the upgrade to Sierra, everything went well, but a strange and annoying defect in the Mail application: I've enabled the display of three columns (mailboxes, the list of messages, the content of the Message). Well, the column of the mailbox does not keep its width, restore continuous width stretched, whenever I close the application window.

  If I expand the column to display the full name of my multiple email accounts, this preference is lost whenever I close the window. Strangely, if I exit the application without closing the window and then that I raise, the width is maintained, but it is ready to be reinstalled the next time I have everything simply close the window... is possible to make it permanent? The other two columns do not exhibit this problem and their width is however maintained, even if I close the window or quit the app...

  Thanks for your suggestion,

  Enrico

  Hi Enrico,.

  I understand that you are having problems with the column width of mailbox remaining the same size when you close the Mail application window. I use the Mail app all the time so I can understand your concern. We will be that we can do.

  Since this problem occurs in your main user account, please start the Mac in safe mode, connect as user principal and then add to your account e-mail and then test it. Once you have tested out, just restart your computer to find your main office.

  Try safe mode if your Mac does not end commissioning

  If the problem persists in safe mode, please test this point to a different user account. This will help determine if the problem is the system level or a specific user.

  How to test a question in another account on your Mac.

  Thank you for using communities Support from Apple. Have a great day.

• The right edge is off the screen and I can't adjust the width.

  Somehow, I have the column on the right side of the screen and now it can not reach to reduce the column width, so I can see the part of the message.

  On the toolbar > Options (mouse hover on a menu appears, do not click on options) > Presentation > vertical display

• Question not answered on the activation of JavaScript

  There was a question and answer on the activation/deactivation of JavaScript using "subject: config.
  Added another question, which I also have another question in response:

  «Despite my Javascript for Firefox 'active' 23 (I checked the ' topic: config "steps above), certain sites are always asking me to activate my Javascript to view content.»

  I am now running NoScript I know blocks JavaScript, but it was going on until I started NoScript.

  I hope someone can answer this question now.

  Thank you
  Bernadine

  This website message can be triggered by other modules or bad script on the Web site that raises this message.

  Try Firefox Safe mode to see if the problem goes away. Safe mode is a troubleshooting mode, which disables most of the modules.

  (If you use it, switch to the default theme).

  • Under Windows, you can open Firefox 4.0 + in Safe Mode holding the key SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • On Mac, you can open Firefox 4.0 + in Safe Mode holding the key option key when starting Firefox.
  • Under Linux, you can open Firefox 4.0 + with leaving Firefox then go to your Terminal and running Safe Mode: firefox-safe-mode (you may need to specify the installation path of Firefox for example/usr/lib/firefox)
  • Or open the Help menu and click on the restart with the disabled... modules menu item while Firefox is running.

  

  Once you get the pop-up, simply select "" boot mode safe. "

  

  If the issue is not present in Firefox Safe Mode, your problem is probably caused by an extension, and you need to understand that one. To do this, please follow article Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems .

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  When find you what is causing your problems, please let us know. It might help others who have the same problem.

• I have a question please. Are the activation of wifi, Bluetooth and 3G while I'm outdoor consume the battery of my iPhone (6 s) and reduce its life expectancy?

  I have a question please. Are the activation of wifi, Bluetooth and 3G while I'm outdoor consume the battery of my iPhone (6 s) and reduce its life expectancy?

  If you want your Apple Watch to stay connected to the phone, you need to keep compatible BlueTooth.

  All functions of the phone will use up the battery life. Some things more than others. Screen brightness, low cell signal strength and location services are major culprits. If you are having battery problems, see this article:

  http://www.scottyloveless.com/blog/2014/the-ultimate-guide-to-solving-iOS-batter y-drain

  I don't know what it means being out of doors has to do with the question.

• the CSS page model: the right side column width

  Hello APEX community,.

  We're stuck in some css stuff: we want to make a little bigger right column width (say, 300px) in the apex 5.0 page template "column on the right. Could someone tell how to do that? We have already copied the page template for editing, but we do not know what css class must edit and also where to put this information in. (in the model directly? in some clean css files?)

  Best regards

  Sebastian

  SebastianScholz wrote:

  Thanks for your answer, but with that, the problem is not completely resolved. You expand the menu actions, Yes, but the area in the middle of the page (Body) will be superimposed by the column of the action menu.

  I have attached a screenshot for better reference, as you can see that the Send button is partially hidden...

  Sorry, that I had no content in this part of the screen so did not notice that. There are a few other CSS rules that have twisted:

  .t-PageBody.js-rightExpanded.t-PageBody--hideLeft .t-Body-main {
    margin-right: 300px;
  }
  .t-PageBody.js-rightCollapsed .t-Body-actions {
    -webkit-transform: translate3d(300px, 0, 0);
    -ms-transform: translate(300px);
    transform: translate3d(300px, 0, 0);
  }
  #t_Body_actions {
    width: 300px;
  }
  

• Highlighted value in table reports using html changes column width

  I use basic highlighting using raw html SQL to select a column. However, I noticed that the column width becomes very large compared to the displayed value, maybe there also took html into consideration for length? Not sure if there is a problem with the grid itself.

  for example this piece of code, see the difference in width of columns status and status_1... Ideally I would like to see the two columns of the same size as status_1.

  select case when BP.STATUS = 'LOCKED' then '<html><body><strong><font color="blue">' || BP.STATUS || '</font></string></body></html>' 
  when bp.status = 'COMPLETED' then '<html><body><strong><font color="green">' || bp.status || '</font></string></body></html>'
  when BP.STATUS = 'PROCESSING' then '<html><body><strong><font color="orange">' || BP.STATUS || '</font></string></body></html>' end STATUS
  ,BP.STATUS STATUS
  from (select 'COMPLETED' status from dual union all select 'PROCESSING' from dual union all  select 'LOCKED' from dual) bp ;
  

  Developer SQL 4.1.1

  It's an unfortunate side effect

  We could / should have code in there to set the width based on the vs html rendering the actual html source code

  but it's a development request

• Stop in the middle of the table column width setting

  I set some tables previously built.

  When you adjust the width of columns, some tables develop the center column and others on the left side of the column.

  Can someone tell me where the setting is for this?

  Thank you very much

  pkahrel wrote:

  Danny meant that you should look at paragraph of parent of the table, not the table itself.

  That's it, thank you. I was struggling to think what to call it.