Smart View and Office 2010

Similar Questions

• Profesional OEM of Windows 7 and Office 2010 OEM policy for the upgrade of processor and graphics card

  Hello!

  I bought Windows 7 OEM (Ulitimate) and Office 2010 OEM (profesional) several months ago. (Less than 6 months). They have been activated very easily.

  Then I bought the latest version of the Tomb Raider game. I installed it and now I can't playe is good, but not very good. Now, I'll upgrade the processor and the display adapter to play this game. If I do that, I have no problem with my windows and perhaps Office activation? If so, what should I do to solve the problem?

  Thank you.

  Change the CPU doesn't require re-activation, but if it is triggered, you can always reactivated by phone:

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• Windows 7 starts questions about mac and office 2010 following an installation

  It's a long cut as short as vent. I've been miss sold a record of upgrade of windows 8 full disk-shaped, with norton and office 2010. My goal of creating windows on my mac for a course I'm taking. After that know I need windows 7, I bought it online. I created a partition of 80g on my mac charge windows 7, then norton. Until I loaded the office that I was invited to perform the update from apple in the windows software 7. Note before I installed norton, I load boot camp mac utilities according to the instructions. So, followed by all as should be. The prompt update from apple was quick time, iTunes and airport, I checked all and then updated. Then I loaded office 2010 and obtained throughout the process from the Microsoft site. On the last part of the installation, the installation failed due to a mistake of hanging iTunes. I tried again and again, I fixed the update to iTunes to add and remove the section of windows. Then, I got different errors. I decided to remove the whole score without uninstalling all programs again. When I get to the windows live, that this falls priming. I get various error messages whenever I try to start the process. As a header of Bank pool, fatal error and so on. Can anyone help? What is the damage?

  Hello

  Thanks for posting your query in Microsoft Community.

  Because the question is limited to Windows 7 on your Mac with Boot Camp, I suggest you contact Apple Boot Camp support for assistance.

  http://www.Apple.com/support/Bootcamp/

  I hope it helps. If you have any questions about Windows in the future, please let us know. We will be happy to help you.

• I want to save the files in tif format in windows 7, 64-bit operating system and Office 2010.

  Hi team, support

  I'm using windows 7, 64-bit and Office 2010 operating system. I want to save web files(e-invoices) in .tif format.

  Because the tif format is only way to download web files(e-invoices) in the download system.

  Please tell us how can I save the files directly in tif like Window XP format.

  He had no problem when I used Windows XP. I could save the files in tif through Microsoft Office Image Writer as a default format.

  A tif file is simply an image

  Office 2010 does not include Microsoft Office Image Writer, he made the MS featured xps document writer and send to OneNote (according to the version of office)

  http://Office.Microsoft.com/en-us/Word-help/save-as-XPS-HA102351576.aspx

  http://www.Microsoft.com/en-GB/download/details.aspx?ID=20261#system-requirements

  You can also think about saving to PDF

  Nothing else; Re-post for groups of office, not this group of generic programs because it has nothing to do with the victory

• AppVolumes 2.10 and Office 2010

  Hello

  Can someone provide me with accurate steps how to package Office 2010 in AppStack? I installed office 2010 during the layout process, set the KMS server (without launching any office program), activated office and completed commissioning. Problem is that when I attribute this appstack to the user and when the user tries to start any office application, user gets nice message of reconfiguration of office and office complain license. I tried to activate office manually from this workstation user. And activation has complained that it cannot find the product key. Maybe there's some sort of bug in combination AppVolumes 2.10 and Office 2010? Thank you.

  Ray, has been able to find the root cause of the problem. I have no words... :))

  Everything is very simple - if you have MS office installed in the Standard directory not I have problems. When Office is installed in the default directory - no problem at all. I suspect that Vmware did not all properly until the end :)

• I have XP and office 2010, I can't upgrade for office 2013 should I buy windows 7

  I bought office 2010 and it came with a free office 2013 upgrade when I try to install it tells me that he needs windows 7 or 8. is this correct

  I bought office 2010 and it came with a free office 2013 upgrade when I try to install it tells me that he needs windows 7 or 8. is this correct

  Unfortunately, you need windows 7 or higher to run.

  Here are the system requirements:

  http://Office.Microsoft.com/en-us/support/system-requirements-for-Office-2013-and-Office-365-ProPlus-HA102785958.aspx

• How can I resume the click right functionality using Terminal Server and Office 2010

  I have a client who has the 2008 standard R2 server that deploys some applications of terminal services to their users.  Office 2010, Adobe Reader and Quickbooks are notable apps that I was sent.

  The problem arises when they bought a couple of refurbished Dell desktop computers.  They lose the ability to right click (option flashes then disappears instantly) - but only in Office programs - Quickbooks and Adobe still working.

  The question is only on these two new machines, which are Windows 7 Professional (and they have other machines pro Win7).  I reinstalled the apps and it solves the problem temporarily, but it always comes back.

  I had to try a few different mouse and I have these computers also remotely accessible and experienced the issue.

  All tracks for a solution would be greatly appreciated!

  Hello

  Thanks for choosing Microsoft Community Forums.

  You have reached the end user Microsoft support. The question that you are running in is better suited to the forum:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  Let us know if you have other questions about Windows in the future. We will be happy to help you.

• Shortcuts are broken icons and cannot open Microsoft Home and Office 2010

  I recently purchased microsoft office home and student 2010 and to start with it worked perfectly but now I can't open any programs and shortcuts seem to be broken and whenever I click to open a program, nothing happens. How can I solve this problem?

  Hello Emmalh93,

  In addition to the information since Andrew, it is a Microsoft FixIt who will help with broken desktop shortcuts.
  http://support.Microsoft.com/mats/system_maintenance_for_windows/en-us

  In addition to problems with programs does not, click on the article below:
  Article ID: 2438651 -how to troubleshoot problems when you install or uninstall programs on a Windows computer

  Let us know if you're still having problems.

  Marilyn

• Smart View and precision

  Hello, I have a question.
  
  Is it possible therefore mart would open with precision settings are installed in settings?
  For example, if I have the prΘconfiguration precision as '3' is it possible to open from smartview with these settings?
  
  Or the only way to precision of installation in SmartView is smartview settings configuration and these would be global for any is open?
  
  Thanks in advance!

  You seem to be hitting a known problem: Bug 12941210: SMART VIEW IS NOT TAKE THE SAME DECIMAL PRECISION that the VALUE IN THE PLANNING

  It is not yet fixed.

  HTH-
  Jasmine.

• Acrobat Pro 7, Windows 7 and Office 2010. C: blocked by GPO. Designer application cannot save. Ther

  Hello

  Please I need help if possible. Recently, I upgraded a user of Windows 7 with Office 2010 and reinstalled its Acrobat 7. We locked c: via GPO, and it seems that a problem when using the designer. It and click on save or save as whatever she wants but nothing happens. If I log in as admin (I see that c :) everything works fine, if possible could someone lead me to the solution.) We can not open c: for it, if there is a registry edit where I can change the default location for this would be great. Thanks in advance.

  Paul

  If the Win7 is a 64 bit system, you will need to upgrade Acrobat on XI. AA 7 will work with Win7, 32-bit, after some game, but will not auto. I am thinking especially of printing to the Adobe PDF printer. PDF Maker certainly doesn't work with OFFICE 2010 necessitating AA X with updates to a minimum.

  For AA7, AcroTray function will probably fail (it did for me on a 64-bit system). In fact, you won't probably even get a printer. I was able to install a HP PS printer (color should probably be selected) and change the name of the Adobe PDF printer. Then change the port in the file. When you print to the printer, it will create a PS file (actually ranked PRN) which can then be opened in distilling to complete the process of creation of PDF. For most users, this isn't an obvious solution - I even made with AA5 on a Win7 32 bit. Due to problems, it is strongly recommended to go (at this point, this is a new purchase AA9 is necessary for the upgrade at present) to AA XI. Sorry for the bad news but AA7 is 8 years old and is ancient in terms of software (OK, I always on some XP machines).

• OBIEE 11g and Office 2010

  I heard that office 2010 will not work with OBIEE 11 g. Anyone know what is the problem or if it's just the addin for BI Publisher?
  
  Thank you

  Hello

  Office 2010 is supported with OBIEE 10.1.3.4.2 and OBIEE 11.1.1.5.0

  Rgds,
  DpKa

• Smart View for office

  Hello
  
  I downloaded the SmartView for office delivery of the oracle installation program.
  
  In the folder, I see:
  
  1. set up for SmartView
  
  2. place for SmartViewHVE
  
  Can someone let me know where I have to run to smartview?
  
  Also what exactly is the purpose of 2 different put in place?
  
  Thank you!

  Hello

  You must run the Smartview.exe.

  SmartviewHVE's Smartview Hyperion Visual Explorer.

  For more information on HVE, check a recent thread
  About Hyperion Essbase Visual Explorer

  See you soon
  RS

• Essbase Excel add-in on 64-bit Windows 7 and 64-bit Office 2010

  Hello world
  
  I installed 11.1.2.2 on server with Essbase and Shared Services.
  
  Now, on the client, I have 64-bit Windows 7 and 64-bit office 2010.
  
  I tried to install the Excel Addin client only (without customer Essbase) and restarted the computer after installation.
  After that install addin not launched automatically and I tried to manually set the add-in, I get an error "is not a valid add-in.
  
  Is this because I use 64-bit office and need to revert to 32-bit.
  is not supported for the last 11.1.2.2 Essbase 64-bit?
  
  Any ideas or experience in this regard will be useful to me that our society is underway for Windows 7 and Office 2010 through the users and if 64-bit Office is not supported or has problems, I wanted them to go with 32-bit Office 2010.
  
  Thank you.

  Have a read of http://essbaselabs.blogspot.co.uk/2012/04/smart-view-64-bit-office-support.html

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Unable to get the list of Essbase servers in the office with Smart View 11.1.2.1

  Anyone tried connection shared in Smart View 11.1.2.1? I am able to connect to, but it doesn't show all the servers in the non editable drop-down list. I tried with Office 2003 sp3, Office 2007 and office 2010, but none of them works. Also, I tried to find the datasourse.xml file in LWS - aps in the console of shared services, but is not there. I tried the solution given on that link also, but the datasourse.xml file is not in place.
  http://timtows-Hyperion-blog.blogspot.com/2011/04/smart-view-private-connection-issue.html
  
  my environment.
  Win 2003 SP2 32-bit
  SQL 2005 on separate windows box
  E.M.P. 11.1.2.1
  Shared services
  Essbase Server
  Essbse Client
  Essbase Integration
  The provider services
  Essbase Studio
  
  All components above configured successfully.
  
  I connect to Essbase through the URL http:// < server >: 19000/workspace/SmartViewProviders. It shows the login window and allow me to get gold, but the drop-down list is empty. No server listed.
  Let me know what I'm missing.

  I found the problem and solved it...

  Cause:
  SmartView is unable to save properly with all other components.

  Solution:
  After the installation of a SmartView, run the Configuration utility and select Foundation-> Web Configuration record properly with all other components.

• Microsoft Office 2010 Home and Student Sucks

  1. I have the version and I yuse only MSN, Windows startup, where can I find the departure for the axess Windows and Internet

  I have a Question when can you stop soaking of people like me by changing the Delete your waste and destroy the planet and most do not register to the disappearance and Uninployed will only get better and life is killed by the have it all.

  For all the Superstars out there stop it at the end that we are all in the same boot and SINKING   !  ????????

  Hello

  We are sorry to hear that you have some problems related to windows and Office 2010. But as the question is unclear, as I needed details so that I can guide you in the right direction.

  1. what exactly is the problem you are having?

  2. are you unable to access the internet?

  3. you are unable to browse any other website except for MSN?

  4. you are unable to boot to the desktop?

  If the problem is related to Microsoft Office 2010, then I suggest you send the request on the forums of Microsoft Office.

  http://answers.Microsoft.com/en-us/Office/Forum/office_2010

  I suggest you to provide us with more information on the issue, so that we can help you further.