SmartMedia 3000

My SmartMedia card doesn't seem to work on my PC laptop Satellite 3000. Any suggestions out there I should try?

I had problems with my card SmartMedia too when I first bought it. in the manual mode for the Satellite 3000 (top 5-22 to be exact) says that you can insert the media with the connector card to the top. IT IS WRONG! YOU insert so that the connector (the metallic area) must face downwards.

Tags: Toshiba

Similar Questions

  • SmartMedia 3000, is not able to find the article in the knowledge base

    I wasn't able to find the article in the knowledge base you're talking about.
    Well, that's maybe because the search algorithm is pretty lame, showing the same success over and over again :(

    BTW, how did you post on the thread closed, Jennifer?

    Sorry I was on vacation.

    Well, no, I Don t carried out the validation in the closed thread. I think the moderators will clean up the mess in the Forum ;)

    Now take this link here->

    http://support-info.toshiba-tro.de/toshserv/his.nsf/0/8fad9b310caa2f0ac1256af7003a34d8?OpenDocument

    Finally the work.

    Good bye

  • Thunderbird downloaded 3000 old messages yesterday... why?

    A Thunderbird download unsolicited messages have resulted in about 3000 messages download yesterday.

    What would cause this? I was storing some files limit... somewhere? I have a virus or something like that?

    Thanks for any advice or help.
    David

    There is a file in your profile called popstate.dat that Thunderbird uses to "remember" where are included with downloads. If it is corrupted in some way what you see occurs.

  • iPhoto has lost about 3000 pictures

    I need help!

    My iPhoto has lost about 3000 pictures in the web I read something about a corrupt library.

    If I scroll in my pictures, I can see them for a few seconds, and then they disappear! I can't find them in the masters (iPhoto 11) and the iPLM show me entered as missing.tiff of the document with no content.

    Can someone help me?

    Thank you for a booty!

    If I scroll in my pictures, I can see them for a few seconds, and then they disappear! I can't find them in the masters (iPhoto 11) and the iPLM show me entered as missing.tiff of the document with no content.

    What happened, until the photos have disappeared?

    Did you move your library to a different location or restore your iPhoto library? Have you run free cleaning of storage applications?

    Where is stored the iPhoto library?

    If missing photos are no longer in your folder of masters and IPLM missing reports TIFFs, the photos are actually missing.  Is there a 'Old masters' folder in your iPhoto library?

    Try to restore t the library since the last Time Machine backup, you did until the photos have disappeared.

  • HP Mini 210-3000

    I have a HP Mini 210-3000 got my son, it works fine but now the user profile is not recognized at startup and I can't get past the password, the password is accepted, but the message "the service user profile Service has no logon. Failed to load the user profile"I was HP Advanced System Diagnostics and the machine passes all of the Tests such as Start UP, hitches etc.

    The Bios CMU however not to update or restore as update is not available

    How can I fix the user profile so that I can open a session?

    Hello

    You can try the following.

    Shut down the laptop.  Tap away at f8 that you start the laptop to enter the Windows Recovery Console.  Use the arrow keys to select Safe mode and press ENTER.  If windows will load in this mode, on the Start Menu, click principally made programs, click Accessories, click System Tools and run the system restore.  Choose a restore point at least 24 hours prior to the issue of logon and then proceed to the restoration.  When you are finished, Windows will restart as normal in order to check if you can now connect correctly.

    Another option if the above does not help is as follows.

    Shut down the laptop.  Tap away at f8 that you start the laptop to enter the Windows Recovery Console.  Use the arrow keys to select "Start using last good known Configuration" and press ENTER.

    Kind regards

    DP - K

  • Satellite Pro U - locked by PASSWORD 3000 files

    I upgraded from VISTA to Windows 7 recently, and since then I can not open any file locked by PASSWORD 3000.

    Any suggestions?

    Hi antonbas,

    To be honest, I never heard PASSWORD 3000.
    What software is this? Have you installed it? If Yes, you must contact the manufacturing of this software to help. Here he s only to Toshiba user forum.

    In addition, if I get PASSWORD 3000 it brings certain results concerning viruses did you check that?

  • Qosmio + hauppauge dec 3000 s or other digital receiver!

    Can I connect the decoder hauppauge dec 3000 s to a qosmio to register film digital and audio digital? the connection can create a bit of conflict the tv tuner?
    Someone has connected to a decoder digital (such as hauppauge or xtreme) to the qosmio and someone can talk about this experience?
    Thank you.

    Hello

    I was not looking for something like this, but I see no reason why it should not work properly. If you have the right driver for this peripheral external, you can install it and use it without problems.

    If there are some problems with TV tuner you can disable it in Device Manager.

  • Satellite 3000 - X 11 where to get the AC adapter

    Does anyone know where I might be able to get a power supply for my laptop model: Satellite 3000 - X 11 model no: PS301E-001VY-EN?

    Thank you.

    Hello

    You can order all the parts of the ASP from Toshiba in your country.
    Satellite 3000 - X 11 is very old, but I think EPA should be able to help you and to order this part.

    Otherwise, you will need to check some 3rd party pages and online for a compatible adapter dealers.

    See you soon

  • Battery won't charge on my Satellite 3000 - x 4

    Hello

    I have a Satellite 3000 - x 4 which does not seem to charge the battery. Have tried new ones, but they do not recharge, defiler light flashes but does not load.
    All of the suggestions.

    Hi keith267,
    I also have a sat3000! What cpu you have in it?

    There are 2 reasons for this problem:
    a cheap and an expensive... lets see what we can do!

    -Make sure that your adapter is good
    for this purpose operate the machine without battery!
    Flashing LED or is it constantly on? When flashing you you have a problem...
    on? good!
    does not start or stops:-AC adapter has gone... made a cheap (app.40a? ¬)

    -operate your machine with battery only
    Ok? good!
    does not work or stops immediately: training of battery is recommended
    for this purpose start a dos without mains system and let it run "to dry".
    After that try to reload with alternating current, do this 5 times to train your battery
    OK afterwards? good!
    None? It is the bitter pill to take

    -Insert the battery and connect the ac power
    When your machine Boote und runs, half the work is done
    the light continues to blink? Yes? you need a new powermodule for your machine...
    That's the bad thing: it is on the motherboard and can not be changed wothout change the motherboard...

    If you have no luck with this procedure you can have mine instead ;-)

  • Satellite 3000 - x 4 - battery flat

    I took my old Satellite 3000 - x 4 out when she came back the battery was flat and would not charge.
    I bought a new one on e - bay, adapt, and yet it's still flat.
    It works on a/c very well.

    Is it possible that someone can stop charging the battery,
    Do you think that the new battery is not good, or is it my s3000-

    Hi mate

    First of all; are you sure that the battery you bought on ebay is ok?
    There are a lot of strange people who sell a product that is not completely ok
    So first of all, you must be sure that the new battery is 100% ok.

    If the battery is ok so I guess that part of the motherboard works bad maybe something wrong with electronic power supply

    In this case the mobo has need to be replaced, but look, man. This isn't worth a try because a new motherboard is more expensive than good old classic, so I wouldn't recommend replacing the mobo

  • How to replace CMOS on Satellite 3000 514?

    My laptop don't boot (even if power light turns on) and I suspect the CMOS needs to be replaced.
    How can I open and replace in my Satellite 3000 514?
    I tried to disassemble the back, but it got stuck.

    Any help?
    Thank you.

    >... My laptop don't boot
    This means you there is absolutely no reaction when you press the power button / stop?

  • display empty satellite 3000 - x 4

    Please, I beg you.
    can anyone help?
    I have a sat 3000 - x 4 while adjusting the screen resolution recently I can put something wrong, now, when win xp (home) starts I get the splash screen, then the screen goes black, connenting to an external monitor gives the same result, is it possible to reset the screen without having to sestore via the factory cd.

    I'm not too hot on computers so any help is appreciated
    Thank you
    Colin

    Hello

    Please try to start the operating system in safe mode. If the beginning of the OS at startup, you need to use the F8 key to start safe mode. It should be possible to change the display mode.

    Please post again if the procedure took place.

    Good bye

  • Satellite 3000 - X 4: Question about recovery CD

    I was told that the recovery disk for the
    Satellite 3000 - X 4 Cel 933 MHz/128 MB / 15 GB / DVD / 14.1 TFT / XP IT

    DON'T FORMAT THE DRIVE, is that correct? I was struck by a virus and my pc is slow and stop often. Although I ran norton several times, it doesn't seem to help.

    I would like to do a clean install on this laptop. Does anyone has the steps to follow for a person non-techie? and once again the recovery disc formats the drive?

    Thank you.

    Hello

    You have 2 options:

    1. standard mode: recover the entire hard drive: all data will be lost.
    2 expert mode: retrieve only the partition with windows on it: only data from this partition will be lost.

    If you perform a new installation, please use the expert mode and you'll be able to create two partitions. On the first, you need to install OS and the second that allows you to save all your data.

    Also check the other postings in the forum. You can use the advanced search.
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=4462&MessageID=14518#14518

    Good bye

  • Satellite 3000-214 - Ctrl key keyboard does not

    Hello

    I started my old Satellite 3000-214 Notebook and suddenly my Ctrl key not working not.
    I tried to clean the keyboard disassemble all the keys to it and clean the grates, without success.

    Can someone tell me where I can get a suitable keyboard: i in Germany.
    It must be an original Toshiba keyboard or is it possible from another manufacturer?
    How can I remove the keyboard of the laptop? What I have to open the case, or is it possible to get it out with a screwdriver or something?

    Thx for any suspicion!

    Best regards.
    Ting

    Hello

    You must use the original Toshiba keyboard that is cared for and compatible with this laptop.
    All parts and devices, you can buy the Toshiba authorized partner in your country. The database complete with ASP in the world, you can find on the page of European support of Toshiba.

    Usually, if you want to remove the keyboard to remove first the thin cover above the keyboard.
    There are two screws holding the keyboard. After the withdrawal of these two screws, you will be able to set the keyboard.
    But be careful; the keyboard is connected with the flat cable to the motherboard.

  • Problem upgrading Windows 2000 with my Sat 3000-400

    Hello guys,.

    at home, I have a Sat 3000-400 with Win ME for my own. Now I want to Win 2000 and a friend told me I should be careful in what order I should install the new drivers.

    I'm a normal user so I don't know where I could find this information. Could someone help me?

    Hi campino,.

    If you want upgrade ME to 2000, you must be careful about the order of installation of driver.

    I found a very good faq on the site of toshiba UK. It is a command the entire facility for many machines.

    for sat 3000-400, it is:

    1 chipset Driver
    2. video driver
    3 Intel SpeedStep Applet
    4 driver Modem internal
    5 LAN Driver
    6 infrared driver
    7 QFE
    8. smart Media utility
    9 easy Button Software

    Here is the link

    http://UK.computers.Toshiba-Europe.com/ and go to Support & downloads, then go to the knowledge base.

    Faq No. 00000007d2DGA.

    I'll hope this helps!

    BOB77 Bye

Maybe you are looking for