SNMP and third-party adapters

Similar Questions

• Multimedia keys and third party players - Satellite A105-S4004

  Actually I don't have any problems with my multimedia buttons. Suffice it to configure them to work for Winamp.

  I have a satellite A105-S4004 with 4 (actually 6, if we count the first and the last two) multimedia buttons and I would like to play/pause, stop, and ffw/rew in Winamp, not Windows Media Player, as is its default behavior.

  The question is even greater because I know where to set it up, as I start the assistance of Toshiba and I start the Toshiba button control. From there, I click the multimedia tab and I have two menus, which I should be able to select another program for media to work with buttons.

  I have Winamp, iTunes, QuickTime, PowerDVD, RealPlayer and same Windows Media Center, none of them appearing on the list. The second list is even worse because I can't choose a DVD player by default program at all (not even win MP).

  So, is there something I can do, any third-party program that I could use to help me or any other tool to configure this or a setting that I missed? BTW, I have the latest updates of all the tools of Toshiba, so don't advice upgrade me... been there, done that, nothing...

  YOY ;)

  Hello

  I have the U400 and I can use playback, pause and another button with the application installed to WinAmp.

  If you want to use these buttons in WinAmp, you must activate the settings of Winamp.

  See also this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=138585

  Good bye

• 3 plug-ins and third party?

  Make 3 third-party plug-ins work in creative cloud, namely InDesign in my current case.

  The only difference for InDesign CS6, as part of the creative cloud compared to the commercial version is how works licensing. If plug-ins are designed to work with InDesign CS6 they should work correctly. You can check with the manufacturer of plug-in to ensure that they are designed to be used with the latest version of InDesign.

  -Dave

• A lot of apps, first part and third party, not work

  It wasn't a problem with watch OS 2.0 or 2.0.1 but since 2.1, many third parties, including Twitter and Shazam apps, have started to misbehave to the point that they are no longer usable. The problems encountered in these applications have not been resolved in more late watch OS updates or the other, as the developers of the aforementioned applications seem to have forgotten their Apple Watch extensions.

  Much worse, however, is how my Apple Watch now fails to acknowledge the reminders and weather information from my 5 c from watch OS 2.2.1 iPhone.  Despite having all the settings on my iPhone related to location-based services and app background enabled, refresh with 'current location' for the default location for the application of the watch and connect to a network WiFi b/g/n instead of WiFi a/c on my phone, my Apple Watch networks still has no time to my current position.

  I liked my Apple Watch since I got it in October 2015, but since December, 3rd party apps began to fail constantly and since last month, own Apple applications have begun to fail. I don't want to disable pairing and pair my Apple Watch again.  Last time I did it, the issues I had have been resolved, and I also lost my information to pay Apple, and my list of easy access history iMessage on my Apple Watch.

  Hello

  If you are not already made for a better return on your devices, keep both Bluetooth and Wi - Fi enabled at all times on your iPhone.

  If you do not want to disable the pairing and re - pair your watch again, he can still help restart your iPhone and your watch. Close the two devices together, and then restart your iPhone first.

• Australis - now begins the great death of Agifts and third-party themes?

  Following the evening and Aurora series with great interest. And after checking out now the UX every night with more advanced parts of Australis seen in preview...

  Later still can I themes and available Agifts? I know that Mozilla plans to simplify the browser as "everyday computer users could feel overloaded" - but is it really necessary that you break a lot of Agifts and especially the Complete 3rd themes part?

  Not a single 3d Party theme I've tried with UX does more, no problem with Aurora Alphas and normal nightly.

  You really should perhaps also think about more advanced users, because taking this features beloved away from us, to make the simplest of Google Chrome similar Firefox - is not just good things!

  So please, do not remove Agifts and theme Support!

  John,

  UX / Australis has changed since 03-28 and this is what it looks like on WinXP. Poor compared to Win7, IMO.

• How to Segment LAN/WLAN with TimeCapsule and third party LAN

  Hello

  I have a bit of a delicate situation. I need to speed up my (W) LAN through segmentation and hope that many of you might be able to help here.

  Currently my TimeCapsule connects via its WAN for a FritzBox with DHCP port. 255.255.255.0 subnet / host 192.168.178.1 TC router is turned off (bridge mode). The TC creates a wireless network. The FritzBox connects to the ISP and a lot other customers outside the TimeCapsule.

  The first WLAN TimeCapsule is extended by a second TimeCapsule. A couple AppleTV and expresses the airport are connected in the scope wireless of the 2nd TimeCapsule but far out of reach for first time capsule. Apple network and FritzBox network clients need NOT communicate with each other. It will be even better if they were aware, because there are other AppleTV, printers, servers UPnP, stream movie, etc.

  Thus, the 2nd TimeCapsule acts as a 'bridge' for the internet.

  Now, I want to segment the LAN (W). The main reason is to reduce traffic. The two TimeCapsules to connect with a very low bandwidth, because there are a whole bunch of concrete between the two. Since then, there are a LOT of current traffic, customers and also the internet connection around my TimeCapsules is not responding to most of the time.

  Is it possible to segment the LAN (W) with my first TimeCapsule and create a LAN (W) dedicated?

  Thank you very much for your help!

  I think that you need good QoS or limitation if I read your message.

  Give me real numbers.

  What is the max download and upload becomes your Frtizbox? Many real world real... using ethernet for the Fritzy and anything else using the bandwidth.

  The first link to the TC1 on ethernet should be no problem... but the TC2 wireless link is probably give you mediocre results... and there is very little you can do about it... have you tried or considered using adapters EOP. (homeplug to the United States).

  If you take the link that will help you.

  Segment the network's not going help the problem that I see.

  What model is the Christopher? Is there a QoS limitation or even decent with the limitation of bandwidth?

  You can set IP alias or VLAN on that?

  What model is the TC?

• I have problems with Web sites that require cookies. In PRIVATE life, I checked ACCEPT COOKIES and third PARTY COOKIES. However, I still have problems. I used your "cookies enable and disable" but it still does not work. Thank you.

  For example, I went to the site of Netflix (which I am registered on) and immediately I get a screen that asks me to enable cookies and gives me links to instructions on how to enable cookies for different operating systems.

  Always good to start with a fresh reboot with Windows XP, if a question just happens.

  Check your security software settings, you can block at this level, firewalls and modules FF.

  (1) FF settings: tools, Options, Privacy tab change, keep until: ask me every time, click OK at the bottom of the box. Then try to go to NetFlix, if you're not invited on the cookies, they don't get FF, get back to your other software security settings and modules of the FF.

  https://support.Mozilla.com/media/uploads/images/2011-03-13-10-18-14-e458fa.PNG

  (2) next FF settings: tools, Options, privacy, Exception button tab, add the web address of Netflix, and click allow, ALSO check all the parameters of BLOCK. Click the close button, ok button and test the results.

  https://support.Mozilla.com/media/uploads/images/2011-03-13-10-18-05-ed2938.PNG

  (3) following FF settings: tools, Options, Security tab, click on the Exceptions button, add the web address of Netflix and click allow. Click the close button, OK button and test the results.

• Legal Affairs and third party security vulnerabilities

  Two Questions:

  1 since I installed sp2 my OS is now a fraudulent copy (even if it is bought through Microsoft) and to add insult to injury, my security software does not work properly. Any ideas?

  2 why is it always the end-user who is treated like dirt by Microsoft and Microsoft still will fall over themselves to correct any errors and if their mistakes cause disadvantages to corporate clients they get compensated? More than likely.

  Hi the former,

  Thank you for using answers Forum.

  How Vista responds as a fraudulent copy?
  Are you able to connect to Windows?
  Are you able to login in safe mode?
  What version of Vista are you using? 32-bit or 64-bit?

  What security software do you use?
  How is it defective?

  I suggest re-setup of your security software to see if it solves your problem.

  Impatience back on your part.
  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Integration of the IPCC CRM and third party

  Hello

  We integrate a CRM (opencrm) software with the business of the IPCC. How is it possible. I know that cisco has provided plugins for CRM, but not for this one. is there a way for the integration of the two? or is there a workaround or we are ristricted to those specified by Cisco?

  Thank you

  Hello

  You can use the OCX and Java libraries provided with the Toolkit ICT Cisco. With these libraries you van do the integration, but be aware if the CRM allows the use of libraries.

  In this way, you may need to set, but the integration you need might be esay to make.

  For a complete description of the API, take a look at this link:

  http://www.Cisco.com/univercd/CC/TD/doc/product/ICM/icmentpr/icm70doc/ctidoc7/ctios7d/cti70dev.PDF

  Hope this helps,

  Juan Luis

• Subversion and third party software

  I'm using Subversion 1.7 and have not any issues. I noticed that version 1.7 is not in the 10.4.2 system requirements worksheet
  
  http://www.Oracle.com/technetwork/apps-tech/policy-automation/documentation/opasystemrequirements10-4-2-1873199.PDF
  
  
  We are currently using TortoiseSvn, although OM has built in support of Subversion. I just need to build a new directory in my initial check repository Suversion and. Once this is done, I can use OPM built Subversion source code control.
  
  I noticed that a new feature in the current version of the OPM is support of subversion zero-config.
  
  It also means that there is no need to use TortoiseSVN?
  
  Thank you

  I would expect Subversion 1.7 to work with OPM. Although we tested it specifically against the Subversion 1.6 to 1.5 is compatible enough.

  You can install svn as part of the installation of the OPM. It comes to SlikSVN 1.6. If you choose to not install it. It will use the existing SVN client available on your machine. It detects this by developing if a svn client is accessible via the standard path of windows.

  You can, if there is a client that is accessible to the general public svn from a command prompt by typing "svn - version" if it refers to something. OPM should use this SVN client.

  You don't have to use TortoiseSvn. TortoiseSvn is essentially a user interface for Subversion built-in windows.

  See you soon
  Frank

• Monitors high-resolution produce unreadably small fonts in software from third-party manufacturers with Windows 7 Professional.

  Operating system
  Windows 7 Professional 64-bit SP1
  CENTRAL PROCESSING UNIT
  Intel Xeon E3 1226 v3 3.30 GHz 33 ° C
  Technology 22nm Haswell-WS
  RAM
  16.0 GB Single-Channel DDR3 @ 798 MHz (11-11-11-28)
  Motherboard
  LENOVO SHARKBAY (SOCKET 0) 28 ° C
  Graphics
  LEN E2323swA (1920x1080@60Hz)
  LEN E2323swA (1920x1080@60Hz)
  2047 MB NVIDIA Quadro K620 (NVIDIA) 40 ° C
  Storage
  931GB Western Digital WDC WD10EZEX-08M2NA0 SCSI Disk Device (SATA) 34 ° C
  931GB TOSHIBA external USB 3.0 Flash DRIVE (USB (SATA)) 33 ° C
  29GB SanDisk Cruzer Glide peripheral USB (USB)
  Optical drives
  HL-DT-ST DVD-RAM GHC0N SCSI CdRom Device
  Audio
  Realtek High Definition Audio

  The default resolution and "recommended" for my two monitors lenovo is 1920 x 1080. I have a new system and I tried for a few weeks now to something to work with screen resolution and third-party apps. I am under W7 Pro right now, but will soon be getting to 10.

  The high resolution is not a problem in 7 with any Microsoft stuff. With the help of a custom of the DPI setting takes care of all the native stuff. Some third-party applications can be set as well. For example, Corel Photo Paint X 7 has bars of detachable command with command icons that can be set to small, medium or large. When the size of the icon is changed, the size of the font adjusts accordingly and it is perfectly feasible, acknowledging the icons or by reading the text. It is perfect for this dual screen system and works like a charm.

  However, most of other software companies are not quite as respectful of their clients. Bryce, formerly owned by Corel, but now DAZ despicable, is not removable toolbars and there is no options available to adjust the sizes of icons in order. Even if preferences to provide an engaging, multiple monitor option not to release the toolbars or increase the font size. It only opens the Bryce "Labs" in the second monitor in a position at the end of the dialog box, half of the Cup.

  It also applies even in a top of the range of applications such as VIEW and Smith Micro, Poser Pro. They present menus and toolbar icons that are so tiny, it is necessary to use the Magnifier Microsoft to make and which isn't real solution when your work with graphics programs. It's incredibly awkward.

  My old system, running XP Pro, SP3, which I always put in place and operational, has a screen resolution of 1280 X 768, and it displays all the software of third party very well. If I try to use this resolution with W7 and these monitors high resolution, I get a crushed image down and half on the screen which is useless. I can read everything very well, but all images are short and fat! If it was possible to type values for the height and width, using an infinite scale rather than the fixed scale that is provided by the slider over, nicked in W7, it would be possible to find a combination that worked. Then, once the wreck was set for third party stuff, the custom DPI settings Windows could take care of the native stuff.

  I had an Oracle VirtualBox running for awhile and loaded the third of things out there and it worked for awhile but it did not offer the ability double screen and, in any case, after awhile it started to get really uptight and I finally just had to get rid of.

  Really, I would be much happier if I could just load XP Pro on this machine and do run as quickly as things that made to run on it. The only reason why I got a new system was the need for more speed and muscle. But if I can't use my favorite, applications worth it?

  Is there no workaround solution that will make it possible to adjust the resolution so that the third-party applications are fully functional using all the space on the screen?

  Thank you to everyone who takes the time to read and respond.

  Since no one answered I'll provide the solution myself. Doing right thing 'upgrade' to Windows 10 has this problem of resolution.

  Other than that, getting W10 to work even at halfway was a nightmare.

• Configure ESX hosts to send SNMP traps to a third-party server

  Can someone please advise how to set up the host ESX (3.5) to send SNMP traps on a third party server... 300 dpi (10.60.0.1)

  gboskin wrote:

  (2) it looks like its only sending traps if there is an error or fault in the hots and I need to send regular performance statistics

  If this is possible depends on what VMware has put in the MIB and agents.

  You can check the measures of performance of the MIB and I guess that when they exist they are not send as a trap, but they must be requested via a get SNMP management suite.

  AWo

  VCP / vEXPERT 2009

• Why finder hide Documents and office files in the home directory of the user by activating iCloud drive? What about the behavior of Time Machine backup or third-party applications?

  I'm under MacOS Sierra. I am connected to my iCloud account. I activated the option Desktop and Documents, but I did NOT activate the option optimize Mac storage, because I wanted to make sure that all my files would be available locally, just in case, I would need to work without an internet connection.

  -J' noticed there now a menu iCloud in my sidebar in the Finder, with links to Documents and desktop.

  -J' also noticed that Documents is no longer presented in my favorites in my side bar of the Finder.

  -This last suggests that files saved in 'Documents' are not saved more on my HD... but only in iCloud, which isn't what I want.

  -Then, sailing in the Finder Macintosh HD/users / 'My account' /, I noticed that my Documents and desktop folders are more visible, as if these files are not saved in my home folder most. Which raises the question: where are My Documents and files on my HD, so they are still?

  -Using a shell session in the terminal and again navigate to/Users / 'My account' /, I noticed that my Documents and desktop folders are still there. Which suggest that records and records of office reside actually still in my home folder under users, but Finder actually hide it and present them as being stored in iCloud only disc. It's very confusing.

  This raises several questions:

  -In the first place, why Apple hide Documents and office files in the directory? Why not view these folders in iCloud and directory?

  -Whence the iCloud folder or drive, reside actually on my hard drive?

  -What time Machine. Is it still back up my document files and folders?

  -What games third-party app mirroring backup of My Documents files and folders? They still work properly? (I use Livedrive backup and Sugarsync for files mirrored across several macs).

  -How can I understand that Apple is doing with my folders and files? Some users might be happy with the iCloud drive concept, without worrying about how it works, but I don't take chances, and I want to keep a good understanding about the functioning of my system.

  Could someone explain what is exactly happening?

  With office and selected Documents, access to these files are now in the iCloud Drive, not in your home folder.

  My guess would be that they do not appear in your file because it would be confusing for many people to make them in two places.

  If you want in the Favorites, open iCloud Drive and drag them in the sidebar here.

  All about iCloud drive has been saved on your Mac. With the exception of the office and the Documents, they are in ~/Library/Mobile Documents. However, if you choose optimized storage, older documents are removed from your Mac. I don't know what is "old".

  ~/Documents and ~/desktop have new metadata indicating probably Finder does not display them in a Finder window, only in iCloud drive. They are not hidden in one of the normal methods of unix.

  I have not tested Time Machine or any other backup program. The folder still exist in your directory home, and they still have all the files, I don't think that changes anything.

• Apple Watch series 2: third-party Applications have control of gps, and exactly what kind of information you get when and after running?

  Third-party applications have control of gps, and exactly what kind of information you get when and after running?

  What I mean is can party like Strava apps or MapMyRun turn on and use the GPS for the courses?

  Also, the default running app, what kind of information you get? During the race, exactly what then I tell me? In addition, exactly what information can I see after I run? I would like to know whether or not she has the cadence.

  Last question: is it easy to verify my info running? Speed and natural lights?

  Thank you!

  Hello

  Information about the integrated training application - including data you can choose to display during training, and where the information is available to see later - are available here:

  • Work with your Apple Watch - Apple Support

  Cadence is not measured by the app to training.

  More information:

  http://www.Apple.com/Apple-Watch-series-2/

• I plugged my charger 6s to a third party iphone and now it is loading slow and very rapid battery loss

  I plugged it to the third-party charger it says it only is not available or not supported, but I kept it plugged, but he was in charge very slowly. The morning I olugged my original charger but it does not charge as before

  There is a chip on the motherboard that can be fried when you use Chargers not apple. It's called U2 chip. I don't know if apple would warranty for you or not, but I'll probably try. If they are used, you can try to get it fixed, but you might have to send it because it's a very advanced repair your local MOM and pop repair shop could not do.