SNMP MIB reference
Hello
I would need the reference of SNMP MIB for C-Codecs, etc. SX20.
Thank you
Tino
C Series uses XML comments to provide the status and only supports of these OID described in RFC1213
1.3.6.1.2.1.1.1
1.3.6.1.2.1.1.2
1.3.6.1.2.1.1.3
1.3.6.1.2.1.1.4
1.3.6.1.2.1.1.5
1.3.6.1.2.1.1.6
1.3.6.1.2.1.1.7
(sysDescr, sysObjectID, sysUpTime, sysContact, sysName, sysLocation, sysServices)
-----------------------------------------------------------------------
Look at this topic:
https://supportforums.Cisco.com/thread/2165290
Paulo Souza
Tags: Cisco Support
Similar Questions
-
SNMP MIB for PowerConnect X 1000 series
Hello
Where can I download SNMP MIB for Dell PowerConnect X 1000 Series switch? I would like to use MIBs updated rather than generic Dell PowerConnect MIBs.
Thank you!
Firmware download includes MIB.
See you soon
-
Hello
I have two cards FWSM in two 6513 switches with active failover.
Connected to the switches are several servers connected to different interfaces of the firewall. One of them is a HPOV (openview) needs the ARP table of the FWSM to reach and explore the net together to start to monitorize the network.
My problem is that I can't get the firewall ARP table, so I can't find out more devices, I am able to SNMP them by editing the poller SNMP in the configuration file of OVO, but even network devices is displayed, it cannot achieve the work.
I stick my worm here sh.
FWSM-1 # sh ver
FWSM Firewall Version 3.2 (1)
Version 5.2 (1) F Device Manager
Updated Friday, June 7 07 20:16 by which
FWSM-1 up to 7 days, 13 hours
1 year 94 days upwards failover cluster
Material:-WS-SVC-FWM-1, 1024 MB RAM, Pentium III 1000 MHz processor
Flash Flash STI 7.2.0 @ 0xc321, 20 MB
0: Int: do not license: irq 5
1: Int: do not license: irq 7
2: Int: do not license: irq 11
The activation key running is not set, using the default settings:
The devices allowed for this platform:
Maximum Interfaces: 256
Internal hosts: unlimited
Failover: Active/active
VPN - A: enabled
VPN-3DES-AES: enabled
Cut - through Proxy: enabled
Guardians: enabled
URL filtering: enabled
Security contexts: 2
GTP/GPRS: disabled
Heel of BGP: disabled
VPN peers: unlimited
Serial number: SAD101804FV
Activation key running: 0x00000000 0x00000000 0x00000000 0x00000000
Configuration changed from enable_1 to 13:59:35.590 THIS Monday, November 3, 2008
I think that version 3.2 can not recover the MIB for ARP, and I found this version 4.01 only. But I was unable to find any kind of upgrade notes here, and we have the control of server farms proyect sttoped for this problem.
Any who had this problem?
How did solve you this?
Thank you!
Angel,
You're right, '(IP - MIB) ARP table entries' MIB was introduced in 4.0 (1) and you have to upgrade to 4.0 code to get to the ARP Table via SNMP MIB.
And here is the document that contains information on the FWSM upgrade.
http://www.Cisco.com/en/us/docs/security/FWSM/fwsm40/configuration/guide/swcnfg_f.html#wp1052902
Kind regards
Arul
* Rate pls if it helps *.
-
Does anyone know where I could find information (MIB) machine for Toshiba MFP devices file. I googled had and checked the predominant sites for these types of files. I'm looking to get the OID for an eStudio-600 so I can configure the SNMP interruptions for alerts of toner and paper jams.
Thank you
Mike
PS: I put here as a matter of SNMP network, if it's wrong please feel free to move it to the right forum.
In my opinion, this forum is wrong place for this question. I think you should contact your local dealer where you bought your eStudio-600.
They offer a type of support or not? -
Download SNMP MIB for Laserjet 5550 and 1505n. Paper, stuffing, etc.
Please help me. I need the MIB files for SNMP messages as paper, jam, etc. Printers are LaserJet 5550 and 1505n. Rules of HP.
Thank you very much for the help. I discovered a different way, but it's here:
On the right side you can see the address and in the Middle, the data type and name. They are all in position 0.
syDeviceValueDefinitionWithVariableAddress, 0, SnmpIntegerSPS, HP_PaperJam, SnmpIntegerSPS2ScadaInteger, Y, N, N, DIN, 0, 0, 0, 1.3.6.1.4.1.11.2.3.9.1.1.2.9
syDeviceValueDefinitionWithVariableAddress, 0, SnmpIntegerSPS, HP_PaperOut, SnmpIntegerSPS2ScadaInteger, Y, N, N, DIN, 0, 0, 0, 1.3.6.1.4.1.11.2.3.9.1.1.2.8
syDeviceValueDefinitionWithVariableAddress, 0, SnmpIntegerSPS, HP_PeripheralError, SnmpIntegerSPS2ScadaInteger, Y, N, N, DIN, 0, 0, 0, 1.3.6.1.4.1.11.2.3.9.1.1.2.6
syDeviceValueDefinitionWithVariableAddress, 0, SnmpIntegerSPS, HP_ConnectionTerminationAck, SnmpIntegerSPS2ScadaInteger, Y, N, N, DIN, 0, 0, 0, 1.3.6.1.4.1.11.2.3.9.1.1.2.5
syDeviceValueDefinitionWithVariableAddress, 0, SnmpIntegerSPS, HP_NewMode, SnmpIntegerSPS2ScadaInteger, Y, N, N, DIN, 0, 0, 0, 1.3.6.1.4.1.11.2.3.9.1.1.2.4
syDeviceValueDefinitionWithVariableAddress, 0, SnmpIntegerSPS, HP_InterventionState, SnmpIntegerSPS2ScadaInteger, Y, N, N, DIN, 0, 0, 0, 1.3.6.1.4.1.11.2.3.9.1.1.2.3
syDeviceValueDefinitionWithVariableAddress, 0, SnmpIntegerSPS, HP_AtBusy, SnmpIntegerSPS2ScadaInteger, Y, N, N, DIN, 0, 0, 0, 1.3.6.1.4.1.11.2.3.9.1.1.2.24
syDeviceValueDefinitionWithVariableAddress, 0, SnmpIntegerSPS, HP_TcpBusy, SnmpIntegerSPS2ScadaInteger, Y, N, N, DIN, 0, 0, 0, 1.3.6.1.4.1.11.2.3.9.1.1.2.23
syDeviceValueDefinitionWithVariableAddress, 0, SnmpIntegerSPS, HP_LlcBusy, SnmpIntegerSPS2ScadaInteger, Y, N, N, DIN, 0, 0, 0, 1.3.6.1.4.1.11.2.3.9.1.1.2.22
syDeviceValueDefinitionWithVariableAddress, 0, SnmpIntegerSPS, HP_NovBusy, SnmpIntegerSPS2ScadaInteger, Y, N, N, DIN, 0, 0, 0, 1.3.6.1.4.1.11.2.3.9.1.1.2.21
syDeviceValueDefinitionWithVariableAddress, 0, SnmpIntegerSPS, HP_Reserved, SnmpIntegerSPS2ScadaInteger, Y, N, N, DIN, 0, 0, 0, 1.3.6.1.4.1.11.2.3.9.1.1.2.20
syDeviceValueDefinitionWithVariableAddress, 0, SnmpIntegerSPS, HP_PaperState, SnmpIntegerSPS2ScadaInteger, Y, N, N, DIN, 0, 0, 0, 1.3.6.1.4.1.11.2.3.9.1.1.2.2
syDeviceValueDefinitionWithVariableAddress, 0, SnmpIntegerSPS, HP_PaperOutput, SnmpIntegerSPS2ScadaInteger, Y, N, N, DIN, 0, 0, 0, 1.3.6.1.4.1.11.2.3.9.1.1.2.19
syDeviceValueDefinitionWithVariableAddress, 0, SnmpIntegerSPS, HP_Printing, SnmpIntegerSPS2ScadaInteger, Y, N, N, DIN, 0, 0, 0, 1.3.6.1.4.1.11.2.3.9.1.1.2.18
syDeviceValueDefinitionWithVariableAddress, 0, SnmpIntegerSPS, HP_DoorOpen, SnmpIntegerSPS2ScadaInteger, Y, N, N, DIN, 0, 0, 0, 1.3.6.1.4.1.11.2.3.9.1.1.2.17
syDeviceValueDefinitionWithVariableAddress, 0, SnmpIntegerSPS, HP_Initialize, SnmpIntegerSPS2ScadaInteger, Y, N, N, DIN, 0, 0, 0, 1.3.6.1.4.1.11.2.3.9.1.1.2.16
syDeviceValueDefinitionWithVariableAddress, 0, SnmpIntegerSPS, HP_Wait, SnmpIntegerSPS2ScadaInteger, Y, N, N, DIN, 0, 0, 0, 1.3.6.1.4.1.11.2.3.9.1.1.2.15
syDeviceValueDefinitionWithVariableAddress, 0, SnmpIntegerSPS, HP_Busy, SnmpIntegerSPS2ScadaInteger, Y, N, N, DIN, 0, 0, 0, 1.3.6.1.4.1.11.2.3.9.1.1.2.14
syDeviceValueDefinitionWithVariableAddress, 0, SnmpIntegerSPS, HP_IoActive, SnmpIntegerSPS2ScadaInteger, Y, N, N, DIN, 0, 0, 0, 1.3.6.1.4.1.11.2.3.9.1.1.2.13
syDeviceValueDefinitionWithVariableAddress, 0, SnmpIntegerSPS, HP_MemoryOut, SnmpIntegerSPS2ScadaInteger, Y, N, N, DIN, 0, 0, 0, 1.3.6.1.4.1.11.2.3.9.1.1.2.12
syDeviceValueDefinitionWithVariableAddress, 0, SnmpIntegerSPS, HP_PagePunt, SnmpIntegerSPS2ScadaInteger, Y, N, N, DIN, 0, 0, 0, 1.3.6.1.4.1.11.2.3.9.1.1.2.11
syDeviceValueDefinitionWithVariableAddress, 0, SnmpIntegerSPS, HP_TonerLow, SnmpIntegerSPS2ScadaInteger, Y, N, N, DIN, 0, 0, 0, 1.3.6.1.4.1.11.2.3.9.1.1.2.10
syDeviceValueDefinitionWithVariableAddress, 0, SnmpIntegerSPS, HP_LineState, SnmpIntegerSPS2ScadaInteger, Y, N, N, DIN, 0, 0, 0, 1.3.6.1.4.1.11.2.3.9.1.1.2.1I hope it is useful for someone too.
Best regards to all users of the forum!
Cristian
-
Hi guys.
I need monitor the status of the SCTP on HNBGW sessions. I use zabbix as SNMP server for this server.
I must add MIB snmp STARENT - MIB.my. I found the next guide with this MIB:
http://www.Cisco.com/c/dam/en/us/TD/docs/wireless/asr_5000/19-0/PDF/19-S...
But this guide is not practical. I tried to find this MIB on the ftp server to cisco, but it was ineffective. Do you where I can download STARENT - MIB.my?
Thank you.
Yuliya salvation,
I hope you do well,
Find enclosed the STARENT-MIB. I changed the extension, please download and modify the .my extension.
****
Starent - MIB.txt for starent - mib.my
****
I hope that helps!
Claudio Gonzalez
-
Cisco SPA122 gateway analog SNMP MIB
Hello
Anyone know where I can get the list of OID or MIB for analog gateway SPA122. I would like to be able to query the State of the line and recording.
Thank you
Ronald
The entire OID tree on SPA122 contain approximately 4000 points about 25 MIB (or more).
But I'm not sure there is information that you want.
It seems that the SNMP protocol to provide standard information to the underlying operating system (Linux). Line status and registration is maintained by the speech application running on it and such request provide no SNMP information as far as I know.
I saved whole SNMP tree in State of rest and again during a call. It seems not to have difference related to the State of the line.
-
PIX 6.3 SNMP MIB, problem with the CISCO-PROCESS compilation - MIB.oid
I am Edgar Servín
I have a cactus and got to watch the CPU of the PIX, I got the OID number:
cpmCPUTotal5sec 1.3.6.1.4.1.9.9.109.1.1.1.1.3
I used the Cisco SNMP Object Navigator and said:
Compile the MIB
Before you can compile CISCO-PROCESS-MIB, you need to compile the MIBS listed below in the order listed.
Download all of these MIBs (WARNING: does not include non - Cisco MIB) or view details about each MIB below.
How can I do?
Hi Edgar,
compiling the MIBs is necessary only when you are using HP OpenView or something similar. With the cactus, I confess that I have never used myself, but I'm pretty confident that you can just set the OID in Cacti and it will just make a periodic SNMP query for that object.
HTH
Herbert
-
vRops 6.0.1 SNMP MIB for external system alerts
Hello
IM struggling to find the MIB for 6.0.1 vROps then we can install them in our company, monitoring system and send THAT SNMP alerts him to vROps... any ideas where I can find... I have tuspect that they are in the TIME but its not easy to access int the VAPP find/extract the.
See you soon
John
Not so easy to get out them of vApp... therefore installed a version of Windows and the extracts from there.
After raising a VMware SR will probably raise a Ko for this.
John
-
Is it possible to change the time it takes for SNMP MIB update?
Hi all
How will I know the time it takes to update the snmp information:
hrSWRunTable
OID: 1.3.6.1.2.1.25.4.2It is to change this time posibble?
Thank you!
Hello
You must contact the TechNet forum, where we have some support professionals who are well equipped with knowledge on area issues, to do so please visit the link provided below.
http://social.technet.Microsoft.com/forums/en-us/w7itproperf/threads
Thank you, and in what concerns:
-
MIB (SNMP) library as vWorkspace 8.5 and 8.0 MR1
Hi all
I'm looking for MIB library to monitor a vWorkspace Envrionement 8.5 and 8.0 MR1 with PRTG monitoring software.
I already searched inside a foglight installation, but this very difficult, causing thousands of MIB
Are there recommendations or with the case of information (MIB) files.
If you have any questions, don't hesitate to contact me
Kind regards
Thomas
Hi Thomas,
We do not have the MIB files specifically for vWorkspace environments because I believe that we do not support SNMP.
What exactly you were trying to monitor? The built-in Diagnostics monitoring vWorkspace & who uses WinRM (or WMI) should give you everything you need to monitor your environment vWorkspace. He oversees infrastructure vWorkspace (hypervisors, VDI VMs, RDSH and from 8.6 RDL and WSM), user session and applications performance and also allows you to establish a correlation between the performance of the system with the user sessions and the ecosystem integer vWorkspace.
If you only want to use PRTG monitoring, I don't know how it works unfortunately. Do Paessler / PRTG have best practices on how to integrate with existing management platforms (other than SNMP MIB files)?
Thank you
Sam
-
Serial number of UCS SNMP polling
Hello
I followed my Data Center with EMC IONIX SMARTS and looking for the MIB and OID query UCS hardware serial number.
Someone asked this before informaion with SNMP?
If Yes can you afford advise how to do?
Thank you
Amir Shengross.
Amir,
CISCO-UNIFIED-COMPUTER-HARDWARE-MIB provides the inventory information.
http://www.Cisco.com/en/us/docs/unified_computing/UCS/SW/MIB/Reference/UCS_MIBRef_chapter_01000.html
You can download the MIB here
FTP://FTP.Cisco.com/pub/MIBs/supportlists/UCS/
HTH
Padma
-
The problem with the SNMP module with OpenManage Server Administrator 8.3 on Centos. (StorageManagement - MIB:virtualDiskDiskCachePolicy ou.1.3.6.1.4.1.674.10893.1.20.140.1.1.26) Watch INTEGER: 2 (disabled), but it is enabled on the controller.
When the Disk Cache Policy: disabled
Watch StorageManagement SNMP - MIB:virtualDiskDiskCachePolicy.1 = INTEGER: 4
It seems that multiplying by 2.
My previous post about 8.2 version en.community.dell.com/.../19653595
Hello
s_korobeiko(. 1.3.6.1.4.1.674.10893.1.20.140.1.1.26) Watch INTEGER: 2 (disabled), but it is enabled on the controller.Integer 2 is activated. You may be using the wrong MIB. According to the documents of dcstorag.mib 8.3 MIB:
dcstorag. MIB-1.3.6.1.4.1.674.10893.1.20.140.1.1.26
virtualDiskDiskCachePolicy OBJECT-TYPE
SYNTAX INTEGER
Read only ACCESS
Mandatory STATUS
DESCRIPTION
"Indicates the logical unit disk cache strategy.
"Value: 1 - no change, 2 - enabled, 4-8 people with disabilities - by default, 10 - undetermined."
: = {virtualDiskEntry 26}http://www.Dell.com/support/home/us/en/04/drivers/DriversDetails?driverId=MCKMY
Thank you
-
SG-300 QoS Cisco on SNMP statistics
Hello.
I would like to monitor my Cisco SG-300 statistical QoS switches SNMP.
I found the statistical QoS configuration page where I could set up two counters.
Now, I have two questions:
(1) how to read statistics QoS on SNMP counters?
(2) I get the distinct quality of service statistics for each single port or following QoS limited to only these two counters?
OK, move this thread... He worked subsequently in a manner:
- Download Managed Switch MIB - 1.4.0 available here
- If you have Linux, extract and put all the files in/usr/share/snmp/MIB/directory
- now, you'll be able to get all the stats desired by yourself using snmpwalk
- Here is list of the available QoS all variables related MIB:
rlQosAceTidxTable
rlQosAclTable
rlQosAggregatePolicerStatisticsTable
rlQoSApplicationDefaultAction
rlQosClassifierRulesNumberUtilizationSystem
rlQosClassifierUtilizationSystem
rlQosClassifierUtilizationTable
rlQosClassMapTable
rlQosClearCounters
rlQosCosQueueDefaultMapTable
rlQosCosQueueTable
rlQosDscpMutationTable
rlQosDscpQueueDefaultMapTable
rlQosDscpQueueTable
rlQosDscpRemarkTable
rlQosDscpToDpTable
rlQosEfManageTable
rlQosFreeIndexesTable
rlQosIfPolicyTable
rlQosIfProfileCfgTable
rlQosMaxNumOfAce
rlQosMibVersion
rlQosModeGlobalCfgTable
rlQosNamesToIndexesTable
rlQosOutQueueStatisticsTable
rlQosPolicerTable
rlQosPolicyClassPriorityRefTable
rlQosPolicyClassRefTable
rlQosPolicyMapTable
rlQosPortToProfileMappingTable
rlQosQueueProfileTable
rlQosQueueShapeProfileTable
rlQosSinglePolicerStatisticsTable
rlQosTupleTable- and you can extract data using the snmpwalk command (you must have installed the net-snmp package):
snmpwalk -v 2c -c CommunitySecret X.X.X.X MIBvariable
where:
- CommunitySecret is the Readonly or Readwrite community string, you have defined on the switch
- Where X.X.X.X is your IP of the switch management
- MIBvariable is your MIB variable name selected in the list above.
-
MIB for channel RF/setting read on autonomous Access Points
Hei everyone. Does anyone know if there is a channel RF of SNMP mib sfor reading/setting and other RF settings on stand-alone 1131AG Accesspoints. In my network, we use "less congested frequency" choice for the selection of the channel and wants to be which is the result of this.
Best regards, Roy
"Less populated frequency" does not... be together your AP to a specific channel or put in evidence that channels 1, 6 or 11. You can use a mib to seethe list mib browser... This migh link... help tram know if its different from the 1131AG:
Maybe you are looking for
-
Firefox crashes when I opened my fifth (or several) tab
I usually kept on 3-4 tabs open and when I click to open a new tab with a specific page, a link to a Google search, either Pandora or a link to another site, Firefox crashes (although Google seems to open correctly every time). I have the 37.0.2 vers
-
How to add sidebar address to the message window
How to display the bar of address side when I am composing a message?
-
Unable to open Web sites after updating iOS 9.3
Updated for iOS 9.3 and now find that I can not open all websites from the list put grew to safari. It looks okay and provides a list if Web sites, but none of them opens. All solutions?
-
Cannot install Service Pack 3. Get the error code 0 x 80240036
Original title: update Download tells me service pack 3 will not install error report 0 x 80240036
-
I get more kod when try to uppdate windows: 0x13EC
Hello I get more kod when try to uppdate windows: 0x13EC. The uppdate name is Microsoft .NET Framework 3.0: Sprakpaket for x 86 (KB928416). Sincerely ARIO Nahram