SNMP Trap to order Action Script in Foglight rule

Similar Questions

• Someone at - it successfully configured the cartridge of integration Foglight for receptions of SNMP Trap and corresponding alert?

  I have a use case, by which we receive------ingest SNMP devices SAN Hitachi interruptions in our Foglight 5.6.5 instance.   We have the cartridge installed and loaded 5.6.3 integration and full access to the dashboard integration.  Can anyone shed light on what are the next steps?

  Daisy,

  I recommend that you look at the information of the community of http://en.community.dell.com/techcenter/performance-monitoring/foglight-administrators/f/4788/t/19552981.aspx#6115

  Bart has contributed to the discussion of SNMP traps.

  David Mendoza

• SNMP Trap before rule Doc

  Is it set somewhere that that the fields are in the rule before SNMP trap. When I separate data, I understand the data essentially looks like this for all the pitfalls:

  SNMPv2 - SMI:enterprises.7572.1.4.1 = STRING: "Global restorations were 6% on server \"IT_Infrastructure_GOLD_c1\. This exceeds the threshold of 4% warning. »

  SNMPv2 - SMI:enterprises.7572.1.4.2 = STRING: "PerformaSureAgent".

  SNMPv2 - SMI:enterprises.7572.1.4.3 = STRING: "9bb99684-93f5-4d82-90f1-90f6322c1f7d".

  SNMPv2 - SMI:enterprises.7572.1.4.4 = STRING: "WAS7PROD-mw-genprod-004-IT_Infrastructure_GOLD_c1.

  SNMPv2 - SMI:enterprises.7572.1.4.5 = STRING: "f745c1c4-8317-4c69-82b8-a926960a9f27".

  SNMPv2 - SMI:enterprises.7572.1.4.6 = STRING: "WebSphere MW Global restorations.

  SNMPv2 - SMI:enterprises.7572.1.4.7 = STRING: "d1302651-decb-4cee-9bb4-719c5abe47b1".

  SNMPv2 - SMI:enterprises.7572.1.4.8 = STRING: "Transaction".

  SNMPv2 - SMI:enterprises.7572.1.4.9 = STRING: '2 '.

  SNMPv2 - SMI:enterprises.7572.1.4.10 = STRING: "server1.xyz.com".

  SNMPv2 - SMI:enterprises.7572.1.4.11 = STRING: "10.12.34.172".

  SNMPv2 - SMI:enterprises.7572.1.4.12 = «»

  SNMPv2 - SMI:enterprises.7572.1.4.13 = STRING: "https://foglight.xyz.com:8443 / console/task/showAlarm?" "alarmId = / alarms/2f625845-eed5-4c81-b02b-b8d88d52aee1"

  SNMPv2 - SMI:enterprises.7572.1.4.14 = STRING: "Wed Jan 30 09:52:22 IS 2014.

  It seems that each line represents a specific variable (or given) associated with the alarm has been triggered. For example, the first line is the message... but I would like to be able to map each row above it is "foglight Name" in our Splunk environment... I can guess on most of them, but if it has been documented somewhere I would feel better about A) do it properly mapped and B) have a place to look for potential changes during the Foglight upgrade in the future.

  I am happy to hear from you to find what you are looking for.

  There is also documentation for the SNMP Trap before rule, if you need it: http://edocs.quest.com/foglight/5610/doc/Core/AdministrationConfiguration/FineTuning_Ref.22.php

• SNMP traps may explain PPPoE users on a router?

  For purposes of verification, I want to use SNMP traps to account for PPPoE users on a router?  I don't see a way to do this.  Is is possible?  If not, what is the best way to go about this?

  "Server enable snmp traps pppoe" is not providing this type of info, any more than I think it should anyway. OTOH, if you configure "accounting aaa" global or "ppp accounting" by interface, the NAS (your rtr) can report these modules to the server (RADIUS or GANYMEDE) AAA:

  rtr# show accounting
  

  Active Accounted actions on tty0, User (not logged in) Priv 1
  
      

   Task ID 1, EXEC Accounting record, 00:35:16 Elapsed
  
      

   task_id=1 service=shell
  
      

  Active Accounted actions on tty33, User ellie Priv 1
  
      

   Task ID 16, EXEC Accounting record, 00:00:17 Elapsed
  
      

   task_id=16 service=shell
  
      

  Active Accounted actions on Interface Async33, User tom Priv 1
  
      

   Task ID 17, Network Accounting record, 00:00:13 Elapsed
  
      

   task_id=17 service=ppp protocol=ip addr=10.0.0.1
  
  

  Then it's a matter of instrumentation of a solution on the AAA alert/report server however you want for the listeners. I think that SNMP trap would not be the first choice as a mechanism of benefit in this case, as there are a lot more simple options on a server.

  Alternatively, if you believe this info can be obtained with some show commands on the router itself and the router supports EEM, I'd want a solution based EEM on the other Network Management forum (https://supportforums.cisco.com/community/netpro/network-infrastructure/network-management), which can certainly generate an SNMP trap as a result.

• Interpretation of the events of SNMP Trap

  Hey everybody,

  I currently receive SNMP traps for important alerts to the IPS, we put in place. The logs for these traps look like this:

  ENT value 6:. 1.3.6.1.4.1.9.9.383.1.2.3 = This signature is a Metacomponent

  ENT value 7:. 1.3.6.1.4.1.9.9.383.1.2.4 = Visual Studio Msmask32.ocx ActiveX Buffer Overflow

  ENT value 8:. 1.3.6.1.4.1.9.9.383.1.2.5 = 6990

  First of all, how can I know what strings like "Ent value 8:. 1.3.6.1.4.1.9.9.383.1.2.5" mean? Is how important it?

  Second, what is the best way to interpret these traps? I guess I need to write a custom script to gather important details and to do what I want with them?

  Pointers would be very useful! I just want to know what I'm getting into. :)

  Thank you!

  You can search the OID in this tool:

  http://Tools.Cisco.com/support/SNMP/do/BrowseOID.do?local=en

  There are many collectors of SNMP trap free and commercial that would help you to that effect. Scripts can participate really sometimes, but of course, if you're an expert at home, no need to pay money to achieve your desired goals.

  Concerning

  Farrukh

• I try to install an air 320u sierra wireless card and I get an error message "could not access vb run time for custom action script. Cannot install the Manager of mobile broadband services.

  could not access vb run time for custom action script

  I try to install an air 320u sierra wireless card and I get an error message "could not access vb run time for custom action script.  Cannot install the Manager of mobile broadband services.  Any ideas?

  Hello

  I suggest you run the fixit and see if it helps:

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

  Also check out this link:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_programs/error-2738-could-not-access-VBScript-run-time-for/1a4499ae-8bc1-4534-9c6f-4d399ac70d9a

  It will be useful.

• How will I know if a program must be bypassed through firewalls (SNMP Trap)

  My computer is having trouble, the upgrade from vista to windows 7. the Adviser to implementation level keeps stopping and when it finds solutions, none is found... Im going through my stuff Aureano and firewall and there is something called SNMP trap. What is - this and that I allow to bypass the firewall? In addition, what I do on the Upgrade Advisor?

  Hello

  Method 1:

   

  I suggest you consult the below the article that explains what the SNMP and traps are:

  http://support.Microsoft.com/kb/172879

  Method 2:

  For what is the Upgrade Advisor, if you believe that the firewall is blocking it ended, you can disable it and re-enable once the program is completed.

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off

• SNMP traps

  If I enable all SNMP traps instead of activate certain specific traps. Will there be an effect on the performance of the device or the network performance?

  What is recommended, either we have to activate all or specific traps SNMP traps?

  Kind regards
  Mukesh Kumar
  Network engineer
  Spooster COMPUTER services

  allowing all the traps could have an impact on performance. Each product trap will be resources for treatment. If there are a lot of pitfalls that occur at the same time it could potentially affect the performance while these traps are processed.

  By default, are indicators of authentication, Link Up/Down, several users and Spanning Tree

  permit. I would recommend allowing specific traps that you need to watch over the default.

• SNMP Trap Variable alertSystemFQDN

  I have a client with a PE r.620 with an iDRAC7 tries to monitor the integrity of their server with interruptions SNMP hardware. They are especially interested in the varbind alertSystemFQDN (1.3.6.1.4.1.674.10892.4.5000.10.8), which is apparently not defined and appears empty when they receive the iDRAC SNMP traps. Exactly how is set the varbind alertSystemFQDN? It is configurable by the user through racadm, or based on a DNS lookup, or what? I could not find a sufficient explanation in the reference Guide of SNMP for iDRAC8.

  anoryx

  I am interested by out exactly this information

  It is taken from the operating system. This is the host name in the operating system. You must have OpenManage Server Administrator installed to iDRAC to be able to question the news of the OS.

• How to deploy the agent SNMP trap receiver

  How to deploy the agent SNMP trap receiver

  The integrations cartridge contains a SNMP Trap Receiver. You can search edocs.quest.com for 'receive snmp' where there are good to work with the agent explanations.

  David Mendoza

• Disable vEthernet snmp trap-the link on 1000v status

  Hello-

  Are there options to disable the registered link interruption snmp on the 1000v Veth interfaces?  The normal 'without snmp trap the status of the link"command is not available on a Vethernet interface on port-profile.  You can do it on the connection ports rising physics, but who don't buy me anything.  The example of this shows doc you can, but that doesn't seem correct to me, http://www.cisco.com/en/US/docs/switches/datacenter/nexus1000/sw/4_2_1_s_v_1_4/command/reference/n1000v_cmds_s.html#wp1309091

  I prefer not to disable all notifications link snmp status, but maybe it's the only option.

  Thanks in advance

  Hey Chad,.

  I created the Bug next to track this problem in versions 1.4 and 1. 4A:

  CSCtx41516 - Disable 'snmp trap link-status' on a vethernet interface

  Essentially, it is a summary of the discussion in this thread and try I did accordingly. If all goes well, you should be able to find out.

  With respect to the request to apply the configuration to the port-profile level, I went back and tested whether this feature was never available in SV1(3b), (3d) SV1, SV1 (4) and SV1(4a). The answer to that is unfortunately not.

  If you need this feature, because it would be beneficial in your environment where you create interfaces vethernet 1000 +, I recommend that join you your team account/sales and put in place a business case for the feature request. They can help to put it together and try to get the feature approved by the developers and the Business Unit request.

  I would like to know if there is something else.

  Thank you

  Michael

• Generate SNMP traps for monitoring tests

  Hi all

  We would like to test our network management system effectively.

  We have configured SNMP. But as we cannot generate some breakdowns that we want to generate some test traps.

  Could you tell me if there is a way to generate the CLI for i.e. false SNMP traps?

  Ideally, we would like to test things like: excess temperature, the FAN failure, failure of power, etc...

  Any help would be appreciated,

  Thank you very much in advance

  Concerning

  Sorry I see you wanted traps, not sys records my bad, so try this link https://supportforums.cisco.com/docs/DOC-11745

  Sent by Cisco Support technique iPad App

• Configuration of SNMP Traps

  Hey guys,.

  Can you explain to me - or point me in the direction - where I can be better able to determine the difference between the following keys.

  config config enable SNMP traps
  config-copy Copy config enable SNMP traps
  config-ctid enable SNMP config-ctid traps
  config-copy Copy-config enable SNMP traps

  Thank you

  Nik

  The trap of the 'config' allows the ciscoConfigManEvent notification, which is triggered when you exit the configuration mode or make a SNMP set.

  "Config-copy" and "copy-config" traps are the same on different platforms and activates the ccCopyCompletion trap and fires when a copy of configuring through SNMP operation ends.

  The trap of "config-ctid" allows the ccmCTIDRolledOver or ciscoConfigManCTIDNotifyGroup, which seems to be related to the functionality of changing the configuration identifier of follow-up .

• After you create the action script for the creation of user Oracle DB - connector DBUM

  Hello

  After we have set up a user of IOM in the database on the target system, you must insert the same user in the RLS_USER_GROUPS table. (INSERT INTO CAMPDB. The VALUES of RLS_USER_GROUPS ('DV < user name >', RLS_DEV');  )

  The requirement is available to the user of multiple databases (different values of SID). But, the user to insert in a table to a database (DB1).

  If I write an after create a file of Action with action script, it will fire for all databases?  How to trigger this script only on the DB1 database?

  (2) in the literature, it is mentioned as below

  (Q) I installed the connector only in IOM (there is no connector server). Thus, in the 3rd and 5th stage, what should I mention

  Key code?

  Decode?

  

  Please suggest

  Thank you

  This query has worked well.

  INSERT INTO CAMPDB. RLS_USER_GROUPS (USERNAME, GROUPNAME) VALUES ({__NAME__}, "RLS_DEV")

• I need help on the matrix of action script 3.0

  I need help on the matrix of action script 3.0

  [Ask in the correct forum allows... Left non-technical Forum Lounge for forum specific program... MOD]

  to apply a matrix for mc mat oppose:

  var mat: Matrix = new Matrix;

  mat.a = Whatever;

  mat.b =

  mat.c =

  mat.d =

  mast. TX =

  mat.Ty =

  MC. Transform.Matrix = Matt;