Someone at - it successfully configured the cartridge of integration Foglight for receptions of SNMP Trap and corresponding alert?

Similar Questions

• How to configure the router Linksys DD - WRT for WVC54GCA E4200

  I don't know how to configure the router Linksys DD - WRT for WVC54GCA E4200. DD - WRT is very complcated. Help, please! Also, I used the TZO.com to the DDNS. Can I set up the DDNS for DD - WRT router? I used the DDNS to my old model router before. Thank you.

  I followed the TZO supporter last night. I can watch my WVC54GCA outside. All solution links:

  http://tzodns.com/support/tutorials/188

  http://tzodns.com/support/tutorials/190

  Hi Majekho,

  Your domain name has decided to 99.245.xx.x. If you go to www.test.tzo.com from the location of the host, you must see this IP address. If these numbers are the same, then all with TZO works correctly. I guess that it is a simple problem with ports (80, 1024) is not open in the router and forwarded to the right internal IP address of the device (for example. 192.168.1.xxx).

  In addition, if you have a DSL, you will need to call your ISP and ask them to show you how to put your modem in "bridge mode". This will disable the firewall in the modem that blocks incoming connections even if you open ports in your router.
  In addition, during the test, it is best to test on your device remotely, this is due to a common problem called loopback with most routers. For more information about looping, take a look at:

  http://helpdesk.TZO.com/cgi-bin/KB.cgi?view=140

• Configure the router Cisco E2000 wireless for my laptop HP with Vista, I can't work.

  Configure the router Cisco E2000 wireless for my laptop HP with Vista, I can't work.  I spoke with Cisco and they said that my Atheros AR5007 adapter does not work with Cisco E2000 and contact my computer vendor

  Hello

  HM... I guess that the Cisco people know what they're taking everything. The AR5005 is a b/g card and there should be a good reason to not work with a router that is able (the E2000 is able g) g.

  This is HP drivers for the card, http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?cc=us&lc=en&dlc=en&softwareitem=ob-55737-1

  If you can't make it work, you must decide between a new card or another router.

  Personally, if it's new and I could return it, I'd get a different router model. But YMMV

  ------------

  My posts reflect my understanding and experience. It does not necessarily reflect the opinion or the vision of Microsoft, or anyone else.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Configure the array of primitive type for POF

  My impression is the implementation of this coherence POF can handle Java primitive and default String so we do not need to provide a custom configuration POF file if the item being cached is Java primitive type.
  
  How about arrary of primitive type? For example, byte []. Then implementation of consistency POF manage byte [] as well?

  Hello

  Arrays of primitives should work. Do you have a question or are you just a question?

  Thank you
  Tom

• How to configure the virtual disk as SSD for the customer?

  Hi all:

  I have a virtual machine in an SSD, the guest operating system is Windows 8, but the guest OS, the virtual disk as 'hard drive '.

  Can I set the virtual disk as SSD for the guset? (Like VirtualBox)

  Thank you!

  Irake99 wrote: can I put the virtual disk as SSD for the guset? (Like VirtualBox)

  No, IDE or SCSI are your only choice.

• Cannot copy the text, OCR cannot copy for translators, recognization of manual and scanned text, text of manuals, Non - English text product impossible to translate

  Revision of textbooks online, we are facing difficulties following.

  Could you please suggest any solution (purchase of adobe software) to meet the following requirements.

  1. Manual language: failed to copy the text to the translation of Google.
  2. OCR (OCR): impossible to copy the text to translate.

  3 Manual of scanned text recongnization

  
  

  Currently, we use Adobe Reader version 11.

  
  

  Please address the above query as soon as possible.

  
  

  Thanks and greetings

  Suresh
  

  Adobe/Acrobat Reader cannot perform text recognition; you will need Acrobat for that.

• I have a problem with the cloning tool, when I retusch to digital photos. When I hover over the image with the cloning tool it slightly changes the picture and ruin. -What someone knows how to configure the tool so it doesn't ruin the image when moving be

  Hi there I do retusch on digitized images and when I move the tool between the dust spots cloning it changes the image slightly. Just noticed and got a wedge after working for several days.

  -Does anyone know how to put the cloning tool to avoid this chang during the movement of the tool on the image?

  Very grateful for an answer

  Anders

  It is possible that your Source region is quite different from the target area that the Clone tool is not the most effective use.

  Another reason is that you have put a sample of Clone of hard edge.

  I suggest you use the Spot Healing Brush tool to remove dust spots and see if that solves the problem.

• No option to configure the card credit or debit for Applepay on my SE

  Hello!

  I just changed my 5 in an SE and wanted to create pay Apple, but as soon as I open the application portfolio, there is no option for the addition of debit or credit card, only to scan passbords. And I have the same problem on my Air 2 as well. I have the latest version of iOS on both devices. I am currently in Hungary (if this is important).

  Please help me, because I have no idea what is wrong.

  I thank in advance

  Mate

  Hi Mate,

  Just follow the instructions in this article to support > configure Apple pay on your iPad, iPhone, or Apple Watch - Apple Support

• Can someone help me pls with the compaq presario s3030il drivers for Windows XP

  the HP site doesn't it have not please help me

  Hello:

  Here is the link to the product for your PC:

  http://bizsupport1.Austin.HP.com/bizsupport/TechSupport/document.jsp?objectID=c00005277&lang=en&cc=us&TaskID=101&prodSeriesId=307003&prodTypeId=12454

  I can give you links to all the drivers, but the card network and modem based on what I see on the link.

  For the network card and modem, if you do not have the drivers for them already, please click in the Device Manager. Then click on the Details tab after the first string you see.

  Those who will identify the make and model of the network adapter, and I can send you the link for the drivers.

  Drivers: Install in this order and restart:

  Chipset: Download and run the first file listed.

  http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=8178&lang=eng&OSVersion=Windows%20XP%20Professional * & DownloadType=.

  Graphics card:

  http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=9033&lang=eng&OSVersion=Windows%20XP%20Professional * & DownloadType=.

  Audio (I think): If this driver does not work, please post the device details like I asked you to do for the network card and modem.

  Accept the agreement. Download and install the 6th on the list (Windows 98Gold/98se/Me/2000/XP/2003(32/64 bits) for driver only. For Windows 98 SE, DirectX (R) 8 is required to enable advanced features. (Executable file))

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=23&PFID=23&level=4&Conn=3&DownTypeID=3&GETDOWN=false

  Paul

• Download is successful, but the application does not work for install

  Hello

  I downloaded the application install Adobe Reader DC, it's in my downloads folder and I can save it in different places but when I click or double click nothing happens. I tried to run as an administrator (even if I'm already the admin for this machine) and I get the same result. There is no error message, so I have no idea what is the problem.

  I use Windows 8.1, Google Chrome. Any suggestions gratefully appreciated!

  Thank you

  KS

  Try using Setup http://get.adobe.com/reader/enterprise/ offline

• Can someone suggest how to store the date/time format just for restoration

  Hello
  I do the restore process, but this isn't the case because just my date format.
  I'm him giving like this: export NLS_DATE_FORMAT ='YYYY-MM - DD:hh24:mi:ss'
  then I give in RRS file date like this:
  
  auxiliary connection.
  run
  {
  until time to_date (July 22, 2011 11:20:13 ',' dd-mm-yyyy hh24:mi:ss');
  
  It gives me the error:
  
  Single and double quotes (' or "") are accepted for a quoted string.
  Quotes are not required, except if the string contains embedded spaces.
  ======================================
  I tried giving WD in this format:
  The VALUE up to THAT TIME "to_date('2010-12-15:11:21:56','YYYY-MM-DD:hh24:mi:ss')";
  
  Then
  "to_date (July 22, 2011 11:20:13 ',' dd-mm-yyyy hh24:mi:ss')"; "
  
  Nothing works
  -------------------
  The one you suggest please?

  RMAN> run {
  2> set until time "to_date('22-07-2011 11:20:13','dd-mm-yyyy hh24:mi:ss')";
  3> }
  
  executing command: SET until clause
  
  RMAN>
  

• Tried to replace the video card integrated with card pci-e x 16 and lost audio - help please

  Is this normal - when you replace your car video with a pci-e video card you would lose your sound.  The system I have is a Pavilion a1450n and has 3 pci slots and 1 pci-e.  I changed the pci-e video in the bios and everything is fine, but no sound at all.  When I took out the card then I would sound.

  Please help.

  The former system of video seems to give me a little trouble.  He keeps hide and freeze from time to time.  Don't know when that will happen.  But when this happens, a blue screen it freezes or just blanks out and comes back.  It will happen nobody knows.  Everything else works fine.  Hate to give up this old gem - for a lot of software installed to lose.

  Thank you all very much for help.

  William

  Hi, William.

  Yes, when you have an old PC where the BIOS does not have HDMI.

  Your PC thinks that you have installed a sound card and a video card because of the HD audio chip on the video card.

  Thus, he disabled the integrated audio system.

  The fix should be easy...

  Go into the BIOS of your PC, look at the options menu and find the onboard audio setting.

  It will be set to auto or off.

  Change the setting to "Enabled". Save the configuration it and yet when you go out (save the settings and exit).

  When you restart, you should have the back of Board.

• Element of the page to send: need for clarification on variable bind and online help

  Hello
  
  For dynamic actions "Code from PL/SQL Execute", online help for the PL/SQL Code is as below:
  
  Specify a single anonymous PL/SQL block, which will be executed on the server to run.
  
  You can reference another page or link elements of the application from your application here by using syntax (for example: P1_MY_ITEM), but if you don't you need to include in the "Items to submit Page" attribute also.
  
  For example:
  
  Start
  
  setCommission(:P1_SAL,:P1_JOB);
  
  end;
  
  In this example, you must also include P1_SAL, P1_JOB in the "Items to submit Page" attribute.
  
  When I read this I understand that I must include in the 'Page of Items to send' attribute if I want to use bind syntax for them. In fact, I include in the "Elements of Page to submit" attribute if I can submit their values on the server and use this new value in the PL/SQL Code. If I want to use are already in session and I want to use these values, but not the new values (updated on the screen, for example), I don't have to submit to the server and I can use the bind syntax to get values that are already in session state.
  
  It was perhaps obvious, but it wasn't for me before I did a few tests with the attribute "Page of Items to submit". I don't know if I'm clear. English is not my mother tongue.
  
  Could someone confirm or not the behavior I described?
  Perhaps the online help could be updated to be more obvious if what I described above is true.
  
  Thank you

  Hello

  Your interpretation is correct. And you can use the old values in the syntax of the bind variables, provided that you have not changed the in your PL/SQL.

  Glance in this way, when a page is loaded from an HTML document is created in the browser that reflects the State of session maintained on the server. But at the time wherever the page is loaded, the two are completely separate and can be manipulated independently of eachother. JS and dynamic Actions using JS work only on the DOM HTML template while Ajax and the PL/SQL work on the Session State on the server.
  So when the page is be displayed two, HTML and session state, can be completely different depending on how you handled the.

  The DOM HTML template and Session state again get synchronized (new values recorded or scrapped) in the treatment of the consignment and the State resulting is again used to render him refresh / reloaded page.

  Kind regards

• Problem with the installation of new software for new HP officejet J4550 and I think it's b/c I upgraded to windows7__

  I recently bought a hp officejet J4550 printer, fax, copy, scan and tried to install the software, but ran into problems: it reads is not compatible and I'm guessing that b/c I've upgraded to windows 7 this is not recognize it.  In the printer box, however he says ready Windows7 so I don't know what's wrong or what I need to do? Any suggestions?

  Contact HP support.

  Windows Update has nothing to with the upgrade of Windows. Please these questions in the support forum: http://social.answers.microsoft.com/Forums/en-US/w7install/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• How to keep or make the area outside the transparent cutting tool. For me he is white and comes when I print

  I like to use the cutting tool and the photo frames.  For example, I use an oval frame that leaves the edges of the original outside the image. Initially the air transparent edges, but they are white and show when I print I do not have a completely white background

  How to make the box really transparent outside - or adjust?

  rross43 wrote:

  I like to use the cutting tool and the photo frames.  For example, I use an oval frame that leaves the edges of the original outside the image. Initially the air transparent edges, but they are white and show when I print I do not have a completely white background

  How to make the box really transparent outside - or adjust?

  If you save your picture in jpeg format, you cannot have transparency. The jpeg format simply doesn't support transparency. You must save in .png, .psd, .tiff formats.

  Note that the layer "background" in the layers palette must be transformed into a 'standard' layer to keep the transparency. Menu layer > New > layer.