SNMPv3 user encrypted

Similar Questions

• Is the guest user encrypted traffic?

  Hello

  The design is the solution typical Cisco Unified Wireless. In one such implementation is the traffic of the guest user that successfully authenticated via encrypted WEB-authentication? If so, what is the standard used, AES128 or TKIP?

  Thank you

  Arun

  Auth Web authentication for LAYER 3 and LAYER 2 will be no authentication open sense... so no its encryption!

  Let me know if this answers your question!

  Concerning

  Surendra

• creating user SNMPv3

  ProCurve 2810 with firmware n.11.64

  SNMPv3 user command allows you to set passwords, but does not allow me to create

  Choose user which password I would like to address.

  It wasn't a cause in the firmware n.11.15, unable to specify if there is new syntax

  or if something bad has crept.

  pass-SNMPv3 user auth md5 pass-string private string

  Done, I found online, and old syntax allowed

  User auth SNMPv3 user name...

  Thanks in advance,

  Brian, [email protected]

  OK, I downgraded the firmware of the N-11-64-n-11-52, the first thing I noticed is that

  # show config command showed that the output line

  SNMPv3 user 'initial '.

  was there, that was missing before.

  I was then able to use the snmpv3 user command successfully, this command

  under the N.11.64 did not accept a parameter where the user name belonged.

  I could add my snmpv3 users, delete the "original" account and find that users

  display, as expected, and that I could use snmpwalk as expected.

  I stop here, the analysis with the conclusion that the n.11.64 update breaks the

  user order # snmpv3.

• Send Login (info by user name and password) of personalized spaces Portal

  Hi all
  
  I'm sorry if it's a very easy thing. I need to send the user name and password the user has entered since my portal personalized spaces, so that the user will not see the spaces landing page. Is this possible? My portal will be used only for public purposes.
  
  
  Edit: I guess I was not clear enough. My creator gave me a very good page departure for the portal. And I don't want to damage it. So I want the user of credentials concludes its portal page and send it to the opening of spaces, move the landing page of the spaces, so that the user does not see useless screen.
  
  Thank you all.
  
  Published by: cenkozan on April 30, 2012 02:52

  Hello.

  You need a mechanism for Single Sign On between your Portal Application and your application spaces.
  If you have licensed Oracle OAM, use it to achieve. However, if you do not have Oracle OAM and then build your own SSO according the following ideas:

  -Write a cookie encrypted after you login to your portal.
  -Create your own IdentityAsserter spaces of domain to check the user encrypted.

  Kind regards.

• The site is secure or must change us password?

  Several news reports today say accounts are at risk for at least 2 years and everyone has to change all passwords - it's true

  Hello erroni, are you curious about this site in particular ([support.mozilla.org])? It is not affected by recent software vulnerability, however, two other web services by mozilla (firefox accounts, persona) were: https://blog.mozilla.org/security/2014/04/08/heartbleed-security-advisory/

  If your question was more on a general term, then yes it is true that this recently discovered and widespread vulnerability can / could be used to make affected sites flow very sensitive information (passwords user, encryption keys, etc.). especially if you have shared in the past a single password for multiple sites, you must change it as soon as possible and set a separate password according to the Web site.

  http://arstechnica.com/security/2014/04/critical-crypto-bug-exposes-Yahoo-mail-passwords-Russian-roulette-style/

  http://heartbleed.com/

• FileVault2. The encryption is done on a per-user basis.

  FileVault2. The encryption is done on a per-user basis, or if the entire disk is encrypted.

  What is the best way to use FileVault2 on a new Mac, if there are multiple user accounts.

  Concerning

  the entire disk, but not all disks on the system as far as I KNOW.

• I have encrypted files on my backup drive. Install the user on the status of CA for access? How?

  How should I keep my new user well that store the same name and all that stuff? If I can access encrypted files?

  If you do not back up your certificate, then you must connect to your machine using the original profile/user who created the encrypted files.  Then, you should back up your encryption certificate.  Then, log in as a new user and import that certificate into the backup that you created.  It is covered in the following Microsoft KB article.  Pay attention to the paragraphs "Why you should back up your certificates" and "how to back up your certificates.  If you cannot connect as the creator of the encrypted files and/or do not have a backup of the certificate, probably you have lost access to these files permanently.

  "Best practices for EFS file system.
    <>http://support.Microsoft.com/kb/223316 >

  HTH,
  JW

• user of the encrypted files has been deleted or renamed

  One of my friends has deleted my user account on my computer. I have encrypted EFS files and don't know how to decipher them. I use xp pro service pak2. No I don't kill him for it. I have read on the MMC and found a certificate with my old username on it, but I have no idea what to do with it. I have forgotten the password I used.

  You must restore the backup encryption certificate you do when your created your EFS files.  The procedure would be the same as the one you used to create the backup copy, except that you 'import' instead of 'Export '.

  "Best practices for EFS file system.
    <>http://support.Microsoft.com/kb/223316 >

  If you have forgotten the password for this certificate, your only hope of another would be by doing a restore of the system on this machine to a date before your account has been deleted.  Even if this cannot be enough.

  "How to restore Windows XP to a previous state"
    <>http://support.Microsoft.com/kb/306084 >

  If you have problems with the restoration of the system, try to do it from Safe Mode.

  HTH,
  JW

• The files are encrypted without any action of the user!

  Recently received "Backup failed" Norton 360 backup. Reason: met encypted files. I never encrypted any file, but on verification, of course, a large number of files have been encypted without any input from me, the user. Any ideas?

  Files cannot be encrypted by themselves. You must actively do this thanks to Vista Professional Edition-full native encryption or using an encryption third-party program like TrueCrypt or that may occur if the computer is infected with a trojan ransomware. However, if it was the latter you would now get messages to "blackmail" him. I suggest you contact Symantec technical support.

  http://www.symantec.com/techsupp/index.html - Symantec technical support
  http://community.norton.com/norton/ - Norton forum

  Burning questions of Norton and patches - http://community.norton.com/norton/board/message?board.id=Announcements&message.id=17

  MS - MVP - Elephant Boy computers - don't panic!

• Having trouble getting the Fax Service to save faxes in encrypted EFS of the user.

  I configured the widows fax service to save faxes received in encrypted in the user folder. So that the files are saved, probably, with the certificate of the user, I configured the Fax Service to log on as a specific user.

  However, after the change is made and try to start the Fax Service I receive,

  "Error 1279: a privilege that the service needs to operate properly does not exist in the service account configuration."

  Watch the event log: event ID 7000, qualifier 49152.

  One can tell me what privileges are required by the Fax Service, and how to add them to the user account. (I made the account to an administrator account and still get the above error.)

  Also, if anyone knows another way to achieve the same goal, would be much too.

  Any suggestions will be greatly appreciated.

  Hi Vista_mb,

  • Your computer is connected to any domain?

  Read the article "some services do not start and you receive an error message after join you a Windows Vista computer to a Windows 2000 domain:"1279, a privilege that the service needs to work properly there is no" http://support.microsoft.com/kb/940668 "

  If your computer is linked to the domain, you can also post your queries on technet community: http://social.technet.microsoft.com/Forums/en/category/windowsvistaitpro/

  Diana
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Cannot open my encrypted Documents? -Cannot open the document: user does not have access privileges

  I am using Window7 and I got some of my encrypted files by opening the properties of the file and selecting the encryption option. I have not had any problems so far, but all of a sudden I can't open my encrypted files. There is an error message indicating "cannot open the document: user does not have access privileges. But I have no other user account on my computer and I am logged in with my administrator profile. I turned off my computer, rebooted and tried various methods, but when I open the file it shows the same message as above. Help, please?

  Hello

  Please follow the steps from the link below.

  Appropriating a file or a folder

  http://TechNet.Microsoft.com/en-us/library/cc753659.aspx

  Also check out the links below.

  Encrypt or decrypt a file or folder

  http://Windows.Microsoft.com/en-us/Windows7/encrypt-or-decrypt-a-folder-or-file

  Recover encrypted files or folders

  http://Windows.Microsoft.com/en-us/Windows7/recover-encrypted-files-or-folders

  Import or export certificates and private keys

  http://Windows.Microsoft.com/en-us/Windows7/import-or-export-certificates-and-private-keys

• Start the LMS 4.2.3 SNMPv3 + tracking users

  The user tracking is able to operate without SNMPv2?  Recently, I've implemented SNMPv3 on a couple of Cisco 3750 for test the LMS functionality.  Given that I removed these switches SNMPv2, I no longer get the IP and MAC address information in user tracking reports.  CiscoView, however, works very well using only to SNMPv3.  Only some components LMS SNMPv3 are capable?

  For the host of the end and other details, you need to configure SNMP v3 context. All other applications also support SNMP v3 on cisco devices supported.

  My next disussion has the same problem, please check so useful:

  https://supportforums.Cisco.com/message/3960325#3960325

  -Thank you

• The VPN user recover encrypted password

  Hi guys,.

  Please let me know if there is a command that can help to recover the password for configuration for a vpn from previous version user ASA not later

  I know this command: "more: execution of the system-config ' lets see the presharded key.

  username password abc XXXXX encrypted

  example, I want to see the password for the username abc

  Thank you

  I don't think that there is a way to get the ASA give you password a local of the user in clear text.

  If you enable mode on the ASA, you can change the password unknown to that you know and can inform the end user.

• Disable encryption of the user export packages

  Hello

  When you try to import users, we get an error to v6.2.  The error indicates that addictive "-unspecified" is missing.  We believe that it is P4P enveloping the error in a kind of error handling, because we have all the data related to the user called "-unspecified" from what we can tell.  We have disabled the encryption for the export packages so we can see what is happening, but that covers only exports ADMN, not export UGM, apparently.  Is it possible to disable encryption for exports of the UGM as well?

  Thank you

  Drew

  Yes, this configuration covers only exports ADMN but not UGM exports. Have you checked "-not specified ' value of the user interface? What country or group field?

• How ATG BCC admin user password is encrypted in ATG10.2

  Hello

  I migrate data from external system profile to ATG. The external system uses the SHA256 algorithm to hash the user password. And ATG also uses the same algorithm. But I found that the string encodings are different in the two systems. So I customized the implementation for the hash of the password in the ATG. I guess that the same hashing algorithm of password to use in publication environments and CSC also for internal users. But the user "admin" is created when data is imported into the system, initially using script CIM. I think that the admin user password is not chopped with OOB implementation (SHA256) because I consider than salt password 'admin' in the table dpi_user in the edition of schema. Can someone let me know how the admin user password is encrypted?

  Thank you

  Mohan

  Hi David,

  My problem is solved. ATG uses the value of connection as its salt value password instead of generating a random salt for admin, merchandising, users of the services.

  Concerning

  Mohan