So many problems

To start my computer freezes constantly. I did a full restore restores countless mini, but the problem still exists someone can help please

You may have a defective hardware.

try to start up in safe mode and system test drive.

then start again in safe mode with network and test drive the system and the browser.

Tags: Windows

Similar Questions

How many problems Windows has?

How many problems microsoft windows there so far, including all versions and office? Address in thousands of billions, billions?

Each product has the potential for bugs, such as Windows, so I'm not trying to make excuses here, just to put things in perspective.

However, when something does not work, or if you get an error message it does not necessarily that it's Windows which is the cause (although it could be). Windows operating systems must interact with so many combinations of hardware, drivers, applications, and devices, the problem may reside with any of them (or a combination of them). It's just that the Windows operating system is where the user sees the error/problem for a lot of people usually assume that Windows is the cause.

Updates and service packs are planned for a number of reasons, such as:

-improved stability;

-fixed the vulnerabilities that have been discovered;

-Add new features.

Types of similar arguments apply to the office.

As for how many problems there are, I have no idea and I don't worry about this - just keep your system through Windows Update.

Fromm Vista Home Premium (with many problems) I wish back to XP PRO. Where can I find the drivers? I think that the original XP disk contains the drivers.

Vista Home Premium (with many problems), I wish to go back to XP PRO. Where can I find the drivers? I do not think that the original XP disc also contains the drivers!

Some computers come with a disk drivers or Drivers and Utilities . If yours does not, look for drivers on the web site of the manufacturer of the computer.

Since an update to Adobe Flash Player (10.3?), I had many problems to access web sites and play 'videos' on them.

Since an update to Adobe Flash Player (10.3?), who apparently is not 64-bit capable, I had many problems to access the websites and "videos" by playing on their. There is also a special site that charge but the screen displays a full blank page. What can or should I do? The adobe site indicates that the new application does not support 64-bit, but it doesn't seem to be a solution for it or the option of returning to the previous flash drive that was no problem.

Hello

Read this interesting information and use the 32-bit IE browser:

'http://kb2.adobe.com/cps/191/tn_19166.html '.

Troubleshoot installation of Flash Player for Windows

http://kb2.Adobe.com/CPS/141/tn_14157.html

Uninstall Flash by using the uninstall program Flash Adobe link above.

Flash is sometimes corrupted.

http://get.Adobe.com/flashplayer/?promoid=BUIGP

Reinstall Flash, after 1st unchecking / unchecking the Google Toolbar download option there.

http://pietschsoft.com/post/2006/12/Vista-experience-update-Windows-Vista-x64-runs-32-bit-Internet-Explorer-by-default.aspx

The Internet Explorer shortcut in the Quick Launch toolbar, and in the x 64 Vista Start menu will run the 32-bit version of Internet Explorer by default. Why run the 32-bit version if IE on the 64-bit version of Vista?

There are actually two shortcuts for Internet Explorer in the "Programs" menu Why two and what is the difference?

This is the title of each and they run exe:

Internet Explorer
"C:\Program Files (x 86) \Internet.

Internet Explorer (64-bit)
"C:\Program may Explorer\iexplore.exe.

One runs IE in the "Program Files (x 86)" folder, this is the 32-bit version. The second is the 64-bit version.

http://kb2.Adobe.com/CPS/000/6b3af6c9.html

Trial of Adobe flash 64-bit

http://www.ehow.com/how_4670030_adobe-Flash-bit-browsers.html

Read the above article on the 64-bit browsers

http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/babaa5f8-FF06-4EA2-aef6-a9416d65f981

Read the above information about Flash and 64-bit browser by PA bear MVP"

I keep trying to find ways to update all my drivers at a time, as many problems with this computer

ORIGINAL TITLE: update drivers, fixing problems, etc. NOTHING WORKS.

I keep trying to find ways to update all my drivers at a time. There are so many problems with this computer, I'm so frustrated and things on it, I have to PAY TO ASK a QUESTION FOR CUSTOMER SUPPORT. Seriously, I'll blow my head because this trash is so UN-easy to use.

Is - it really too much to ask for a single ' difficulty my * ing of the computer problems "button?

Here is a list of what specifically is messed up. I don't want to spe backspace to show what I mean.

I type really fast and never skip a key. Howeer, the computer ignores the keys as in the words "SPE" and "howeer" I typed jut. Now it's "jut" instead of "right".

So, there is a problem that should not be happenng.

Secondly, I play some games including the [scroll] scrolling bar on the frame-inmousepad does not work, period. 2011-2012 release, so it's something I can't fix on mymouse of course. I tried fixing it, and he says he successfully fixed wa. LOL no, it wasn't, it's just * ed even more.

I refuse to poor a ton money int. f fixing these problems because I simply don't trust they're going to fix anything, and these problems should not occur initially.

k so bye, go go rifle my brain of becaue it's so rustrating.

Hello

1. does come with any specific application?

2. who is the manufacturer of the computer?

3 did you changes to the computer?

Keyboard problem:

Method 1: Try with the keyboard on the screen and see if it helps.

Type without using the keyboard (on-screen keyboard)
http://Windows.Microsoft.com/en-us/Windows7/type-without-using-the-keyboard-on-screen-keyboard

Method 2:

Check if the problem persists in safe mode with network, to start the computer in safe mode, follow the below mentioned article:

Link, please refer to: start your computer in safe mode:

http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

The application youtube for the ps vita is the source of many problems and all sorts of problems for me

The application youtube for the ps vita is the source of many problems and all sorts of problems for me... the main issue he won't let me write reviews... Please solve this problem as soon as possible... Please. I can't take more of this nonsense that youtube app gives me... and it's even for the ps vita... It's very annoying that I can't make comments... it just says: when I try cannot do this action or something... It has * ing me off and many others also. :'(

Hello David,.

As much as we would like to help you, our colleagues in Playstation is best placed to help out you. Discover their community at http://community.us.playstation.com/ or visit their Web site to support https://support.us.playstation.com/app/contact_options for more information on contacting them.

Many problems with Windows, Windows cannot communicate with the device or resource (primary DNS server)

Many problems with Windows, Windows cannot communicate with the device or resource (primary DNS server), Internet Explorer browser does not.

Hi Rachel,

I understand that when you try to connect to the Internet, you get error "Windows cannot communicate with the device or resource (primary DNS server)", what other issues you are faced with Windows?
- Using a cable or a wireless Internet connection?
DNS (Domain Name System) translates the URL in IP (Internet Protocol) addresses (and vice versa). For example, if you type http://www.microsoft.com into the address bar in your web browser, your computer sends a request to a DNS server. The DNS server translates the URL to an IP address so that your computer can find the Microsoft web server.

I suggest you to follow the methods in this article and check if it helps.
http://support.Microsoft.com/kb/2779064/en-us

Let us know if it helps. If the problem persists, please answer, we will be happy to help you.

Smartphones blackBerry so many problems with bold 9000

Hi guys,.

I just bought 9000 couple "BOLD" days and I have so many problems that I can't solve.

I use talk to rogers. I tried to configure e-mail, but does not work. I tried to download apps from blackerry.com site also didn't work, I download the msn and yahoo messenger, but I can not connect. I'm new on this cannot so someone help me please. So many problems do not know where to start, but I would like to firstly somehow use email on blackberry and blackberry messenger.

Thank you very much in advance

zakaleli wrote:

I use talk to rogers.

There is your problem. Rogers doesn't have a plan PAYGO for the BlackBerry data Plan.

You need a contract, and add the BlackBerry data Pan, to get the BlackBerry features you want. There's no other way.

Upgrade Windows 7 to 8 leaves too many problems - is a new installation required?

I spent literally the last 3 weeks by train to improve our 9 PCs from Windows 7 to Windows 8 and I have an incredible number of problems.

For example:

1 updates fail and return to Windows 7, unless all 3rd party drivers are uninstalled (Windows Update drivers are OK) and most of the software that contains services that interact with the material are uninstalled (such as CPU - Z, PC-Wizard, etc.). Note that the Windows Upgrade Wizard indicates that these programs and drivers are OK (latest versions at least) it becomes an effort of trial and error to figure out what needs to be uninstalled to start successfully in Windows 8.

2. I moved (using the folder properties supported ' location' tab) download for all users folder in the shared c:\users\public\downloads folder in Windows 7. During the update the permissions folder become corrupted with the latest user created on the PC Windows 7, ending up as the only user with the permissions to read/write to this public folder. The structure of NTFS in Windows 8 is damaged at this point and it '' believes '' the public downloads folder inherits permissions from user created c:\users\{last} instead of c:\users\public and is unable to change them. I had to use icalcs substitute all c:\users\public file permissions manually down to allow other users to access the public download folder. Check the hard drive (even to force a full audit) does not correct the inconsistent file permissions.

3. the c:\users\public folder is shared even if a public share is off, but it is shared corrupt (read-only, but no remote users can actually access it and cannot be modified or deleted). Change the 'sharing public folders' option has no effect. Same "net share" may not change or see even the share of existing corruption. I'm not able to create a sharing of this folder (results in an error message), or delete the existing share. This problem is present on every PC, I've updated so far.

4 family Safety is damaged and unusable. Windows Live Family Safety has been one of the applications that caused the upgrade fails, then it has been uninstalled directly before the upgrade to Windows 8. Unfortunately, this seems to leave Windows 8 in a State of dysfunction in security for the family. I've been using an online id to log on to my children and this seems to have enabled temporarily family safety but not totally. Unfortunately, the only way to make changes is the local PC as the fss.live.com site is no longer synchronizes with any of my Windows 8 PC (if I pass local ID and online, it syncs once). Also delays no longer work and my children can stay on their PC, as long as they like. I spent hours scouring the Web for a solution and other that "refresh the PC" or http://windows.microsoft.com/en-US/windows/essentials-2012-release-notes?T1=winlivefamilysafety I have not found a solution (I've not updated the PCs).

5 Windows 8 apps don't work for one of my children on all accounts the PC but works very well for adult administrator accounts. I tried everything from wsreset.exe, creation of new user accounts, temporarily making kids accounts administrator, uninstall, and reinstall, all apps, switching back and forth between accounts ID base and online local, etc manually. Sometimes, that I managed to get re-installed applications to work temporarily, but after an opening session and closing session or possibly another user by connecting on the apps again fail (in failure, I mean it seems they start and then just close without an error message). Even the app store is messed up for some users, in what he repeats to me it can not load the store, then, after pressing 'try again', it loads only a small subset of the store. Also when I look at the apps installed (in the store) it shows nothing is installed and nothing is bought (not same mobiles which was installed by the same user on another PC of Windows 8; well on the other PC of Windows 8, they arise).

6 folder and registry permissions are changed in many places and this causes some games to stop working. Manually uninstall and reinstall the game solves the problem by opening of also manually security on folders and registry entries. I assumed that the process of upgrading resets all the folder permissions and registry, but some older software requires write access to the folder 'program files' specific in order to update the configuration files, etc., and the upgrade process breaks it.

7. any user that office has been moved (using the tab "location" supported in the method properties) has no read access to their workstation after authentication and Windows Explorer will not start (when you click on "desktop"). I had to delete and recreate the users, or manually change the folder permissions.

8. users where their documents, photos and videos have been moved to a second hard drive (again using methods officially supported in Windows 7) end up with all sorts of issues such as incorrect file permissions, Windows 8 apps do not work until the user is deleted and recreated, etc..

8. the problems seem to continue to go on and on. Each day we discover a new broken feature that must be manually fixed one way or another and I lose all of my time to research on the web and try to resolve these problems.

Unfortunately I still failed to operate Family Safety, nor have I managed to get Windows 8 job applications (more there are many other minor things that are broken, such as some items in Control Panel do not work, etc.) and officials "tips from Microsoft" seem to be "cool PC". Unfortunately this is essentially a new installation of the operating system, as far as I'm concerned, because previously all installed software must be reinstalled manually. I tried this on a PC (after saving) and I've always found that I had delete and recreate my children's accounts to get Windows 8 applications work.

At this point I don't know what to do and how to proceed. As a 'Christmas gift' we 'bought' Windows 8 for the world and I had planned to take advantage of the $39.99 special and free Media Center/Bitlocker/etc. addition which is available only until January 31. Unfortunately, the upgrade process has been nothing less than a nightmare total and at this stage, I believe the following will produce:

1. I need to break down and perform a new installation of Windows 8 on every single PC followed by reinstall all software and reconfigure all the user accounts, family safety, etc. Otherwise realistically me uninterrupted work on all of this for the rest of the month (something that I don't really have time for).

2 Microsoft needs to release updates of Windows 8, which allows to improve the level of experience and greatly improves the installation of Windows 8 resulting.

3. I have abandon on the installation of Windows 8 at the moment, but I can't justify paying $269 - $469 in the future for Windows 8, so we'll probably with Windows 7, until we buy new computers. I guess another partial option is to buy Windows 8 for $39.99 for each PC and then to later pay another $70 for the upgrade of Media Center/Bitlocker/etc. (currently we use Media Center on every single PC with 3 of our PCs being devoted to Media Center full-time and the rest operating as 'customers').

Is there any hope that #2 is going to happen or Microsoft 'done' with the upgrade and will continue to recommend a "refresh" after an upgrade to solve problems?

I've tried a fresh install of Windows 8 on a different partition with 5 of the 9 PC and it went flawless and very quickly (in less than an hour, I had all 5 upwards and running Windows 8 - although without additional software installed, no user accounts configured, etc.) so I know that it will work. With one of these installs I have experimented with Windows 8 for a few days (and that my children and wife home to test) to confirm that everything seems to work properly, including applications of Windows 8, the installation of some of our software, etc.. Based on this, I think that all the questions that we are experiencing are caused by a routine upgrade of Windows 8 very fragile, not by the base Windows 8 operating system.

I should also mention, I have backups of the installed Windows 7 original and I tried to restore and re-upgrade several times and even if I can improve things (returning to download default folder locations, additional software uninstall, etc.). I can't get Windows 8 apps working on my children's accounts, nor good difficulty number other issues (such as security for the family, permissions of file corrupted for some software, etc.). Whenever I try it takes at least 4 hours, so I gave up trying to figure a way to upgrade "functional" at this stage.

Thank you

Steve

I realize that Microsoft recommends customers perform a 'Refresh' on their upgrades of Windows 8 to solve many problems, but it is not a path I am willing to travel. I experiment in the updating of a PC, and as you say this has resolved most of the issues (even if once again, Windows 8 apps stopped working a few days later).

.

.

.

This resulted in the continuation of the process of upgrading for our family PCs (steps 9 to 33 are the steps in upgrade of base):
1. Restore our latest backup of Windows 7 (before the upgrade to Windows 8). If still running Windows 7, perform a full backup.
2. Make sure that the latest virus signatures are installed for the installed Antivirus (Microsoft Security Essentials in our case currently) software and run a full scan of the system.
3. Download Windows 8 drivers for the hardware.
4. Possibly find enough disk space to create a partition to restore the existing installation of Windows 7 (which just saved) to. This can be on a second drive or disk manager can be used to reduce an existing partition to create a new partition large enough to restore Windows 7. Restore Windows 7 for the new partition, and then name the new volume with a unique name (for example, TempWin7). EasyBCD to add partition newly restored to the Windows boot loader. Starting system test and make sure that the drive root (usually C:\) uses the new volume (check the drive c. name (this way if Windows 8 does not work you can return to Windows 7 easily.)) Finally, when you do know that Windows 8 is not working properly you can delete this volume). Note on my ~ 8th update attempt on the 2nd PC I was upgrade the upgrade has failed and left the system with a MBR corrupted with no way to start it. The MBR has been so badly damaged that the process of repair of Windows 7 and Windows 8 could not solve the problem. Same bootrec /fixmbr /fixboot, bcdboot c:\windows, bootsec all/force/MBR bootrec, etc. were not able to get a bootable system. I ended up performing a new installation of Windows 8 on another hard drive and then I added step 5 below to my list of upgrade tasks to ensure that I didn't not get stuck like this again).
5. If the PC contains more than 1 hard drive and they are not all used in a hardware RAID, use EasyBCD to install the bootloader of Windows on the second/third hard disk and configure the boot loader to boot from the hard drive with all the bootable partitions configured (this provides a work around to get the operating system if the Windows 8 upgrade process fails and translates by a unbootable system).
6. Download and run the tool TDSSKiller Rootkit, GMER Rootkit detection tool, Malwarebytes Anti-Rootkit and Anti-Malware Malwarebytes to make sure there are no hidden rootkits or malware installed. Uninstall all the installed utilities.
7. Uninstall all software known to cause trouble (both reported using the upgrade wizard, search on the web and attempts to upgrade Windows-based 8 prior who does not).
8. Once complete scanning, starting test the computer while forcing the BIOS to boot from the disk hard other to make you that there is an available alternative starting method.
9. Uninstall Live Essentials 2011.
10. Installing Live Essentials 2012 (this is because they have seen many cases where Windows 8 fails to migrate settings of Live Essentials 2011 properly and leaves you with a dysfunctional state that requires an update of the system for safety of work; Live Essentials 2012 is apparently able to migrate settings from 2011 and 8 Windows upgrade can apparently works with Live Essentials 2012 settings).
11. Start Live parental controls and run through the configuration steps (without necessarily making changes) to ensure that the settings are migrated from the Live Essentials 2011.
12. Sign in using each account monitored by parental control and after that the drive stop loading of applications, log off.
13. Log on with an administrator account and uninstall Live Essentials 2012.
14. Uninstall all anti-malware and anti-virus software and unplug the network cable
. If security software Norton has been used, download Norton Removal Tool before uninstalling it and after using the program manager to uninstall, run the removal tool (note that Norton fails to remove certain services when you use the program to uninstall Manager that caused the Windows upgrade process 8 fail on one of our PCs other AV software may have similar problems).
Activate Microsoft Defender and Windows Firewall.
Uninstall everything about software and software which includes services that interact with the hardware or virtual hardware.
Uninstall all 3rd third-party drivers that are specifically designed to interact with the user and if possible only to install the drivers for "Windows Update". If not available, install just the naked driver for the device or leave the unit without a driver during the upgrade process, if it is not critical manually.
Uninstall the video driver ATI, including the Catalyst Control Center software (even if the driver is listed as support Windows 7 and Windows 8, CCC upgrade breaks and leaves the system with the dysfunctional video settings in Windows 8)
If all user folders have been moved in Windows 7, move them back to the default locations. For example we moved the documents, photos, videos and office on a secondary hard drive on some PC and these user accounts is damaged because of this sequel to the upgrade of Windows 8. We also move all folders download user to c:\user\public\downloads and this too must be moved to the location of the individual user (c:\user\{user}\downloads) before the upgrade because it causes corruption of NTFS security after the upgrade to Windows 8.
Perform an upgrade on-site (repair) of Windows 7 SP1 to Windows 7 SP1 to upgrade the operating system in a known and stable state. Note that this must be done with a DVD of Windows 7 SP1 RTM and slipstream not updated media, nor can it be done with a DVD of Windows 7 without SP1.
If necessary, connect the network cable and install all updates using Windows Update critical update (note, officially, it is recommended that the system is fully updated before you attempt to upgrade to Windows 8, but technical support suggests why a clean Windows 7 SP1 install with a few critical updates which should install automatically if updates to the installer of Windows 8 are enabled during the process) at level).
Optionally, install the latest Microsoft System (KB947821) tool. If an upgrade on the spot did not it is a critical step, but with the upgrade on the spot, it should be redundant and not required (this tool checks the status of the update of the operating system and makes sure that every file that is supposed to be updated through any installed update is updated. He then sets up Windows Update to install or reinstall incompatible updates may not be correct).
Installing Live Essentials 2012 (it is not clear if this step is necessary, but apparently the upgrade in-place to Windows 7 can potentially cause of parental control settings enter an inconsistent state).
Connect the network cable and using an administrator account set up parental controls.
Log in using accounts controlled by parental control
By using an administrator account uninstall Live Essentials 2012.
Run a chkdsk /f on the drive system and start-up and restart.
Connect the network cable (if it is disconnected) and perform an upgrade from Windows 7 to Windows 8 on-site, ensuring that the post-installation updates are enabled during the process and that there is an Internet connection.
Activate and install the Media Center add-on by using the same key used in the previous attempt to upgrade to Windows 8.
"Turn Windows Features on / off" enables the Hyper-V instead of Virtual PC and XP Mode (even if Virtual PC and XP Mode have been installed and being used in Windows 7, the upgrade process uninstalls them and does not allow for Hyper-V, which is the replacement of Windows 8).
Updates by using Windows Update, select all the recommended and the optional updates (deselect everything, you don't want such as Bing Office; right click and hide updates you don't want), click 'Install' to start the download. Allow the download and install updates before proceeding to the next step.
Install Windows 8 3rd part drivers If Windows 8 specific drivers are available and desired. This includes installing the latest video driver for Windows 8.
Connect with each user and pass to a Microsoft Account to activate parental control. Open a session out and back in.
The Bank of Windows startup, click on in the upper right corner and update all installed applications which have updates available.
Restart the Windows store, right click and select the installed applications. Install all of the applications associated with the Microsoft Account, you already have installed (and want to install). Do this for each user.
Configure Hyper-V to replace Virtual PC to virtual operating systems.
Install a previously uninstalled like cell phone software, CPU - Z, EasyBCD software, etc. (as long as it supports Windows 8).
EasyBCD allows to set up the dual boot or triple (most of our PC have MCE2005 (XP), Vista and Windows 7 on separate partitions or units).

I stressed step 20 above, because the technical support said they find that this step can make a significant improvement in the final Windows 8 upgrade results. Without the Windows 7 upgrade (repair) inplace before the upgrade to Windows 8, he said that they have poor results that require an update of the system to get things to work. By adding this step, step Live Essentials 2012 associated, by ensuring more 3rd third-party drivers are uninstalled, uninstalled all the 3rd party software that interacts with the hardware and all records are found in their locations by default, the upgrade process is apparently much more likely to result in a closing fully functional install Windows 8. Unfortunately, told me that they always have problems with some PCs, even after all the above, and that is why a new installation is always the best approach. They also said that until that antivirus makers improve their compatibility Windows 8 it is better to stick with the software antivirus from Microsoft that is built into Windows 8 and not install any AV 3rd party software.

Anyone have any additional suggestions or disagree with the installation steps above? Although it is a lot of work, if it is, it will be much easier than a new installation and I already spent 100's of hours trying to get Windows 8 to upgrade properly and 100's of hours trying to clean upgrades corrupt I end up with (with only partial success).

I have a total of 11 PC, I tried to upgrade to Windows 8 and so far I have 2 semi-functional updated of (with control parental does not not work and Windows 8 Apps doesn't work is not for non-administrator accounts). For the moment, I restored Windows 7 (reconfigured the Boot Manager to start Windows 7 instead of Windows 8) with the 4 other PCs ended up broke after trying to upgrade to Windows 8.

IT WORKED!

Finally, I updated 2 PCs from Windows 7 to Windows 8 with parental control and applications of Windows 8 works for all users and I didn't have to mess with security of folder or the registry, difficulty missing junctions or mess around with anything to get this working. In addition, for the first time, I didn't need to perform a refresh and reinstall all software (programs and features shows 187 programs installed to a PC and the other has more than 200). So far, looks absolutely everything works (even if I did have enough time to ensure that the reports of parental control and all safety features are 100% still works but it doesn't look like it will).

The bad news is that it took 8 hours to upgrade each PC because of the number of steps (compared to the hundreds of hours lost trying to get the previous corrupt Windows 8 updates work properly, it was easy). In the future, I'll work on several computers at the same time to speed things up. Upgrading Windows 7 on Windows 7 on-site took several hours alone, but I think that this step is crucial to get an upgrade of Windows 8 fully functional (Technical Support of Microsoft agent I talked to strongly recommended this step and said that it was necessary to upgrade his personal computer Windows 7 to Windows 8 also).

Now I have 9 PCs to go. For PCs with a minimum software installed and with a rootkit, I will perform a new installation but the rest I'm going to use this procedure.

The next challenge is to get enough key to install Media Center on each of them.

Windows 8 buggy again after many problems and refreshes.

Hello, this has been my third discount over the last 2 weeks. Windows 8 always worked fine for me until about 2 weeks ago, when he got into a loop of auto repair after a reboot. I tried everything to fix it and finally I had to update Windows.

After that I finally managed to install most of my programs lost and began to enjoy my PC once again, suddenly the Windows Explorer crashed and began to close and restart all the time. When I tried then auto repair, it remained stuck in another loop, this time with a nice BSOD at the end I searched a lot on the internet and I tried everything I can to remedy this, but finally I had to réactualisiez.

After this refresh Windows seems to work perfectly, and better than ever before, I could even install some updates, that I was not able to install before because of some kind of bug. Then after a certain update that upgrades to Windows 8.1 appeared in the app store. My first attenpt to install failed, so I googled the error code upward and run the update during a clean boot with updated graphics drivers. The update failed, but this time my internet connection is completely. After some research, I discovered the autoconfiguration service WLAN could not be started due to error 193: 0xc1. I tried all possible ways to fix that I found on the internet, but nothing has worked. Finally I have a third update of despair.

Given that the update, I can't sem to be able to install half the updates and all click on boxes of the metro interface miss the text. When I tried to contact Microsoft support, I discovered my product id is "unavailable" and everything is just very bug.

So, what should I do now? Perhaps yet another Windows refresh help? Is there meaning to perform a new installation? Is this necessary?

I also finally have windows 8.1.

Table of contents of the double thread:

A clean installation resolves all possible hard disk problems?

Hello, I had a lot of trouble with my PC for the past 3 weeks, including the BSOD and other kinds of bugs and crashes. I described most in this issue:

http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-system/Windows-8-buggy-again-after-many-problems-and/7618aacf-7503-44ed-a3ff-ebe0d6823832

Now everything seems to work again fine, but I get several kinds of problems. When I tried to install the video card drivers that my computer kept freezing, most Metro applications turns off after opening, some programs do not start sometimes and I get a lot of other mistakes. My computer needs correct the mistakes of hard drive several times a day.

Everything points to the failure of the hard drive. However, I use an SSD. I don't know if this changes anything though.

Then my last question was a clean install would stop all this evil for good? And if not, what might help?

I just wanted you to know that I finally discovered the cause of the accident. Because those made completely inaccessible Windows, I couldn't dump files. But after each clean install Windows crashed after I installed a bunch of software. But I was not sure what software it is, so I made a wrong bet, and my computer crashed again.

So, after that 2nd clean installed, I searched for accidents with the program I knew most, Deamon Tools. Each accident came when I restarted the computer after a session, I have installed or used Daemon Tools in. And indeed, it turns out be known to cause a BSOD. However, that sounded weird to me, because I used it for many months and never the source of problems.

After that my 3rd installed clean, I decided to restart my computer after each program I have installed, in the case of another wrong bet, but do not install Daemon tools. And now, while I tap on my beloved PC, it works very well with all my software, with the exception of Daemon Tools.

I also red published there also with pretty much every other ISO mounting program on Windows 8. No idea how to mount the ISOs anyway? (Edit: oh, it seems that Windows 8 is a built-in ISO film editor.)

Too many problems with the latest version of Lightroom

Hi all
I have too many problems with the latest version of Lightroom (CC 2015.2.1 1046594)
In fact, the latest version of 3 or 4 were bad: instead of doing better, I always had more problems.
So I would like to go back to a previous version of lightroom
Adobe customar care, in Italy, is unnecessary:
they can just to:
-looking for answer on this forum
-saying "you solve your problems just with the de-insall and re-install it.
stop, no more...
in this way they create me a lot fo iusses...
I use the English version of the PS and LR, but they made me reinstall the Italian version of CC because it has been blocked
the result was that CC does not recognize software, due to a different language version
so, I contacted again Adobe Customer Care... they said "no problem, uninstall LR, delete these files and install this...
I did and I let go 2 years to develop the parameters on the correction of the colors for my clients because they told me to remove a folder, I need!
so, I ask you now if there is a way to return to a previous version of lightroom, any previous version...
I never found better performance in more recent versions...
I've always found, performance slower, more problems...
personal idea: I do not understand why adobe are boicotting itself, but I think he do!
Thanks to you all

Hi ramontillo,

6.3/CC 2015.3 Lightroom is now available - try to update to this version which includes the previous import feature, bug fixes and new support for photo/target device profile: Lightroom CC 2015.3 / 6.3 now available

Concerning

Pete

I had many problems with the first cc 2014 so I reinstalled it and now it says that I can not open my project because it was recorded on a newer version. Is there something I can do?

I had many problems with the first cc 2014 so I reinstalled it and now it says that I can not open my project because it was recorded on a newer version. Is there something I can do?

Hi Gemma,

It seems that after reinstalling, Premiere Pro no has not been updated to the latest version. Check your application creative cloud for updates. If she says Premiere Pro is up to date, try to update Premiere Pro through help > updates... option in Premiere Pro.

Thank you

Regalo

I had to uninstall firefox because it was causing so many problems with my computer. I was using the latest version 18. What is the problem?

I had nothing else problems since I installed the latest version of Firefox version 18. It crashes my computer no matter what I do. Even if I do not use the browser. I uninstalled three times and the problems just seem to be deteriorating. Finally, I uninstalled and it did not reinstall again. I will not use again until the problems are solved. Also, I don't know is that funmoods or whatever it is that has replaced my google home page. I don't like software to decide what services I use. I've been a user of firefox for more than 15 years. I've never had problems like this before. I spent in Safari. It works without interfering with the other tasks I do on my computer. I don't know what version 18 is but the previous version of firefox that I used was perfectly fine. I had no problem whatsoever with it. It seems as if this version has not been tested enough. Also my daughter is having the same problems with his computer and they all started with the new version. So it isn't just me. At least give us the option to revert to the previous version and we ask if we want to improve when a new spell. However, I never had these problems in the past with any version of firefox that I installed. I like the features of firefox, but cannot afford to keep restarting my computer. It seems that firefox is hindering and then hangs up the computer and I can't do anything else even if I do not use it. It seems to stay in the background and just hang up. Please fix this.

The problem is unlikely to have been with Firefox itself. It is much more likely to have been with some software or malware you have inadvertently installed

Installs official Firefox is not bundled with other software. Firefox is customizable and has many extensions of the software you can choose to install but don't have to do anything.

Funmoods is also a malware or at least software which is often hated to see these messages
- https://support.Mozilla.org/en-us/search?q=funmoods
If you want to reinstall firefox official site:
- http://www.Mozilla.org/en-us/Firefox/all/
Then start playback on the malware removal and the toolbar
- Fix Firefox problems caused by malicious software
- Remove a toolbar that has supported your Firefox or the homepage search
If you want more advice back again post.

Many problems with the Camileo X 100

I have a Camileo X 100 (nice and fantastic image quality) and the files are not edit from any conversion or editing software, I tried several times with all software codec
My PC configuration is:

Win VISTA Home Premium SP2 32 bits, ACER 9420 17 ", Intel Core 2 CPU T5500, 1.66 GHz, RAM 2 GB, 160 GB HARD drive, NVIDIA G... eForce Go 7300, K-Lite Codec Pack 5.8.3, etc..).
0 is sufficient or not, for family movies to watch on DIVX player (on Plasma 42 '' HD Ready TV)?

Issues related to the:
1. How can I manage these files?
2. I to convert before (but without the quality loss)?
3 Please someone explain 'step by step' what I need to do (and with what software) to make simple movies (divx), without quality loss?
4. when I connect my X 100 to the TV and I watch a movie, always remain above a boring bunch of icon that it does not disappear. Is only my X 100 or other people has the same problem?
5. I have a lot of problem also with remote control, it's very crazy (bad firmware, zoom not working,...)?
6 is it better me to return the camera, or these problems have all and that they can be resolved?
7. is there someone who does not have problems with x 100? How is possible?
8. when Toshiba updates the firmware?

There are too many insects (ALL IS SLOW AND UNSTABLE).
Only ARCSoft (software bundle) works, but it is not good (cheap).
Please answer me all 9 questions.
Sorry for my English (I prefer Italian).

Thanks for the help.
Antony

0 configuration is fine, although I would not use Vista, but it's personal preference.
1. the files can be managed without conversion with any video editing program, for example, Sony Vegas, Nero Vision, etc.
2 - 3.Conversion is necessary to be able to view the DIVX player, as AVCHD is not supported usually. Unless you have a Blu - ray player. If you have one, you can prepare a BR disc on computer time, if you have a BR player that can burn discs BR. In this case the conversion will be done, but quality will remain. You can not divx without loss of quality. It is impossible.
4. annoying iis band always on the screen, you cannot delete it.
5. the remote control works well, with the only problem I've found, described in I opened. Zoom does not work? You mean during playback? It only works when you save.
6. it of your decision if you return the camera or not. I think that for this price it is very good. Get you one, where there is no such problems for the triple price.
7.i have a single problem (remote) with it, but at the moment I can live with, that I made my compromise.
8 Toshiba support is terrible. I can not even a phone number or e-mail address in Hungary for Toshiba to support. The Web page for support is source of confusing and if you search for TV, you're not among the many companies, that takes the car from these products. Ridiculous. I don't know if they will update the firmware, I'm curious too.

Good luck.

Performance-to-many problem (using the model of the FAQ)

After reading "HOW TO: post a request for tuning SQL - model showing statement" I gathered:

I have included some general information at the bottom of the post

The following SQL statement has been identified as a bad performance. It takes ~ 160 seconds to run, but similar (indicated below first statement) SQL statements run in ~ 1 second.

SQL taking 160 seconds:

SELECT
a.*
FROM
table_a a
INNER JOIN table_a_b ab ON a.id = ab.media_fk
WHERE
ab.channel_fk IN (7, 1);

SQL in ~ 1 second or less

...
ab.channel_fk IN (7);

Or:

...
ab.channel_fk IN (6, 9, 170, 89);

The purpose of the SQL is to return lines from table_a associated table_b (not in SQL) through the junction table table_a_b.

The version of the database is 10.2.0.4.0

These are the parameters relevant for the optimizer:

show parameter optimizer;

NAME                                               TYPE        VALUE
-------------------------------------------------- ----------- -----------------------------------------
optimizer_dynamic_sampling                         integer     2
optimizer_features_enable                          string      10.2.0.4
optimizer_index_caching                            integer     0
optimizer_index_cost_adj                           integer     100
optimizer_mode                                     string      ALL_ROWS
optimizer_secure_view_merging                      boolean     TRUE

show parameter db_file_multi;

NAME                                               TYPE        VALUE
-------------------------------------------------- ----------- -----------------------------------------
db_file_multiblock_read_count                      integer     16

show parameter db_block_size;

NAME                                               TYPE        VALUE
-------------------------------------------------- ----------- -----------------------------------------
db_file_multiblock_read_count                      integer     16

select sname, pname, pval1, pval2 from sys.aux_stats$;

SNAME                          PNAME                          PVAL1                  PVAL2
------------------------------ ------------------------------ ---------------------- -------------------
SYSSTATS_INFO                  STATUS                                                COMPLETED
SYSSTATS_INFO                  DSTART                                                07-18-2006 23:19
SYSSTATS_INFO                  DSTOP                                                 07-25-2006 23:19
SYSSTATS_INFO                  FLAGS                          0
SYSSTATS_MAIN                  SREADTIM                       5.918
SYSSTATS_MAIN                  MREADTIM                       7.889
SYSSTATS_MAIN                  CPUSPEED                       1383
SYSSTATS_MAIN                  MBRC                           8
SYSSTATS_MAIN                  MAXTHR                         1457152
SYSSTATS_MAIN                  SLAVETHR                       -1

Here is the output of the EXPLAIN PLAN of:

PLAN_TABLE_OUTPUT
Plan hash value: 3781163428

----------------------------------------------------------------------------------------------------
| Id  | Operation             | Name               | Rows  | Bytes |TempSpc| Cost (%CPU)| Time     |
----------------------------------------------------------------------------------------------------
|   0 | SELECT STATEMENT      |                    |  1352K|   771M|       | 60042   (3)| 00:05:56 |
|*  1 |  HASH JOIN            |                    |  1352K|   771M|    27M| 60042   (3)| 00:05:56 |
|*  2 |   INDEX FAST FULL SCAN| SYS_IOT_TOP_316310 |  1352K|    11M|       |  1816   (4)| 00:00:11 |
|   3 |   TABLE ACCESS FULL   | TABLE_A            |  2190K|  1230M|       | 32357   (4)| 00:03:12 |
----------------------------------------------------------------------------------------------------

Predicate Information (identified by operation id):
---------------------------------------------------

   1 - access(""AB"".""MEDIA_FK""=""A"".""ID"")
   2 - filter(""AB"".""CHANNEL_FK""=1 OR ""AB"".""CHANNEL_FK""=7)

Note
-----
   - 'PLAN_TABLE' is old version

For reference, the EXPLAIN PLAN when using

...
ab.channel_fk IN (6, 9, 170, 89);

that runs in ~ 1 second is:

PLAN_TABLE_OUTPUT
Plan hash value: 794334170

----------------------------------------------------------------------------------------
| Id  | Operation          | Name      | Rows  | Bytes |TempSpc| Cost (%CPU)| Time     |
----------------------------------------------------------------------------------------
|   0 | SELECT STATEMENT   |           |   143K|    81M|       | 58982   (3)| 00:05:50 |
|*  1 |  HASH JOIN         |           |   143K|    81M|  2952K| 58982   (3)| 00:05:50 |
|   2 |   INLIST ITERATOR  |           |       |       |       |            |          |
|*  3 |    INDEX RANGE SCAN| C_M_INDEX |   143K|  1262K|       |  1264   (1)| 00:00:08 |
|   4 |   TABLE ACCESS FULL| TABLE_A   |  2190K|  1230M|       | 32357   (4)| 00:03:12 |
----------------------------------------------------------------------------------------

Predicate Information (identified by operation id):
---------------------------------------------------

   1 - access(""AB"".""MEDIA_FK""=""A"".""ID"")
   3 - access(""AB"".""CHANNEL_FK""=6 OR ""AB"".""CHANNEL_FK""=9 OR
              ""AB"".""CHANNEL_FK""=89 OR ""AB"".""CHANNEL_FK""=170)

Note
-----
   - 'PLAN_TABLE' is old version

Here is the output of SQL * Plus AUTOTRACE, including CALENDAR information:

SQL> set autotrace traceonly arraysize 100;
SQL> SELECT
  2  a.*
  3  FROM
  4  table_a a
  5  INNER JOIN table_a_b ab ON a.id = ab.media_fk
  6  WHERE
  7  ab.channel_fk IN (7, 1);

1336148 rows selected.


Execution Plan
----------------------------------------------------------
Plan hash value: 3781163428
----------------------------------------------------------------------------------------------------
| Id  | Operation             | Name               | Rows  | Bytes |TempSpc| Cost (%CPU)| Time     |
----------------------------------------------------------------------------------------------------
|   0 | SELECT STATEMENT      |                    |  1352K|   771M|       | 60042   (3)| 00:05:56 |
|*  1 |  HASH JOIN            |                    |  1352K|   771M|    27M| 60042   (3)| 00:05:56 |
|*  2 |   INDEX FAST FULL SCAN| SYS_IOT_TOP_316310 |  1352K|    11M|       |  1816   (4)| 00:00:11 |
|   3 |   TABLE ACCESS FULL   | TABLE_A            |  2190K|  1230M|       | 32357   (4)| 00:03:12 |
----------------------------------------------------------------------------------------------------


Predicate Information (identified by operation id):
---------------------------------------------------

   1 - access("AB"."MEDIA_FK"="A"."ID")
   2 - filter("AB"."CHANNEL_FK"=1 OR "AB"."CHANNEL_FK"=7)

Note
-----
   - 'PLAN_TABLE' is old version


Statistics
----------------------------------------------------------
      10586  recursive calls
          0  db block gets
     200457  consistent gets
     408343  physical reads
          0  redo size
  498740848  bytes sent via SQL*Net to client
     147371  bytes received via SQL*Net from client
      13363  SQL*Net roundtrips to/from client
         49  sorts (memory)
          0  sorts (disk)
    1336148  rows processed

The TKPROF output for that statement looks like the following:

TKPROF: Release 10.2.0.4.0 - Production on Mon Oct 1 12:23:21 2012

Copyright (c) 1982, 2007, Oracle.  All rights reserved.

Trace file: ..._ora_4896.trc
Sort options: default

********************************************************************************
count    = number of times OCI procedure was executed
cpu      = cpu time in seconds executing
elapsed  = elapsed time in seconds executing
disk     = number of physical reads of buffers from disk
query    = number of buffers gotten for consistent read
current  = number of buffers gotten in current mode (usually for update)
rows     = number of rows processed by the fetch or execute call
********************************************************************************

ALTER SYSTEM SET TIMED_STATISTICS = TRUE


call     count       cpu    elapsed       disk      query    current        rows
------- ------  -------- ---------- ---------- ---------- ----------  ----------
Parse        1      0.00       0.00          0          0          0           0
Execute      1      0.00       0.03          0          0          0           0
Fetch        0      0.00       0.00          0          0          0           0
------- ------  -------- ---------- ---------- ---------- ----------  ----------
total        2      0.00       0.03          0          0          0           0

Misses in library cache during parse: 0
Parsing user id: 21
********************************************************************************

SELECT
a.*
FROM
table_a a
INNER JOIN table_a_b ab ON a.id = ab.media_fk
WHERE
ab.channel_fk IN (7, 1)

call     count       cpu    elapsed       disk      query    current        rows
------- ------  -------- ---------- ---------- ---------- ----------  ----------
Parse        1      0.01       0.00          0          0          0           0
Execute      1      0.00       0.00          0          0          0           0
Fetch        2     27.23     163.57     179906     198394          0          16
------- ------  -------- ---------- ---------- ---------- ----------  ----------
total        4     27.25     163.58     179906     198394          0          16

Misses in library cache during parse: 1
Optimizer mode: ALL_ROWS
Parsing user id: 21



********************************************************************************

OVERALL TOTALS FOR ALL NON-RECURSIVE STATEMENTS

call     count       cpu    elapsed       disk      query    current        rows
------- ------  -------- ---------- ---------- ---------- ----------  ----------
Parse        2      0.01       0.00          0          0          0           0
Execute      2      0.00       0.03          0          0          0           0
Fetch        2     27.23     163.57     179906     198394          0          16
------- ------  -------- ---------- ---------- ---------- ----------  ----------
total        6     27.25     163.62     179906     198394          0          16

Misses in library cache during parse: 1


OVERALL TOTALS FOR ALL RECURSIVE STATEMENTS

call     count       cpu    elapsed       disk      query    current        rows
------- ------  -------- ---------- ---------- ---------- ----------  ----------
Parse        0      0.00       0.00          0          0          0           0
Execute      0      0.00       0.00          0          0          0           0
Fetch        0      0.00       0.00          0          0          0           0
------- ------  -------- ---------- ---------- ---------- ----------  ----------
total        0      0.00       0.00          0          0          0           0

Misses in library cache during parse: 0

    2  user  SQL statements in session.
    0  internal SQL statements in session.
    2  SQL statements in session.
********************************************************************************
Trace file: ..._ora_4896.trc
Trace file compatibility: 10.01.00
Sort options: default

       1  session in tracefile.
       2  user  SQL statements in trace file.
       0  internal SQL statements in trace file.
       2  SQL statements in trace file.
       2  unique SQL statements in trace file.
      46  lines in trace file.
     187  elapsed seconds in trace file.

DBMS_XPLAN. Output DISPLAY_CURSOR:

select * from table(dbms_xplan.display_cursor('474frsqbc1n4d', null, 'ALLSTATS LAST'));

PLAN_TABLE_OUTPUT
SQL_ID  474frsqbc1n4d, child number 0
-------------------------------------
SELECT /*+ gather_plan_statistics */ c.* FROM table_a c INNER JOIN table_a_b ab ON c.id = ab.media_fk WHERE ab.channel_fk IN (7, 1)

Plan hash value: 3781163428

---------------------------------------------------------------------------------------------------------------------------------------------------
| Id  | Operation             | Name               | Starts | E-Rows | A-Rows |   A-Time   | Buffers | Reads  | Writes |  OMem |  1Mem | Used-Mem |
---------------------------------------------------------------------------------------------------------------------------------------------------
|*  1 |  HASH JOIN            |                    |      1 |   1352K|   1050 |00:00:40.93 |     198K|    182K|    209K|    29M|  5266K| 3320K (1)|
|*  2 |   INDEX FAST FULL SCAN| SYS_IOT_TOP_316310 |      1 |   1352K|   1336K|00:00:01.34 |   10874 |      0 |      0 |       |       |          |
|   3 |   TABLE ACCESS FULL   | TABLE_A            |      1 |   2190K|   2267K|00:02:45.56 |     187K|    182K|      0 |       |       |          |
---------------------------------------------------------------------------------------------------------------------------------------------------

Predicate Information (identified by operation id):
---------------------------------------------------

   1 - access(""AB"".""MEDIA_FK""=""C"".""ID"")
   2 - filter((""AB"".""CHANNEL_FK""=1 OR ""AB"".""CHANNEL_FK""=7))

Thank you for reading I'm waiting for suggestions to improve the performance of this statement.

-----

H3. Backgroud

There are many years my company made decided to maintain many-to-many relationships in our database using pipe delimited fields. An example of field value:

'|ABC|XYZ|VTR|DVD|'

Each delimited value refers to a unique "short" code TABLE_B (there is also a real digital foreign key to TABLE_B, which is what I use in the junction table). We are regularly using these columns with the next SQL style:

...
WHERE
INSTR(pipedcolumn, '|ABC|') > 0
OR INSTR(pipedcolumn, '|XYZ|' > 0
...

Appropriate indexes have been created over the years to make this process as soon a possible.

We now have an opportunity to correct some of these errors of design and implementation of junction tables to replace the current field. Before that, we have decided to take a copy of a database to a client with the largest set of records and test. I created a new junction table:

TABLE_A_B DDL:

    CREATE TABLE TABLE_A_B (
        media_fk NUMBER,
        channel_fk NUMBER,
        PRIMARY KEY (media_fk, channel_fk),
        FOREIGN KEY (media_fk) REFERENCES TABLE_A (ID),
        FOREIGN KEY (channel_fk) REFERENCES TABLE_B (ID)
    ) ORGANIZATION INDEX COMPRESS;

    CREATE INDEX C_M_INDEX ON TABLE_A_B (channel_fk, media_fk) COMPRESS;

And the analysis on a pipe delimited field, populated by this new table.

I then compared the performance of the following SQL:

SELECT
a.*
FROM
table_a a
INNER JOIN table_a_b ab ON a.id = ab.media_fk
WHERE
ab.channel_fk IN (x, y, n); -- Can be Many Minutes

--vs.

SELECT
a.*
FROM
table_a a
WHERE
INSTR(OWNERS,'|x|')    >0
OR INSTR(OWNERS,'|y|')    >0
OR INSTR(OWNERS,'|n|')    >0; -- About 1 second seemingly regardless

When x, y, n are values that occur less frequently in the TABLE_A_B.CHANNEL_FK performance are comparable. However once the frequency of x, y, n increases, performance suffers. Here is a summary of the data CHANNEL_FK in TABLE_A_B:

--SQL For Summary Data
SELECT channel_fk, count(channel_fk) FROM table_a_b GROUP BY channel_fk ORDER BY COUNT(channel_fk) DESC;

CHANNEL_FK             COUNT(CHANNEL_FK)
---------------------- ----------------------
7                      780741
1                      555407
2                      422493
3                      189493
169                    144663
9                      79457
6                      53051
171                    28401
170                    19857
49                     12603
...

I noticed that whenever I use any combination of values that occur over approximately 800 000 times (i.e. IN (7, 1) = 780741 + 555407 = 1336148) then I get performance problems.

I find it very difficult to accept that the old pipe delimited fields are a better solution (without taking into account any other than this search criterion!).

Thank you for reading this far. I really look forward to suggestions on how to improve the performance of this statement.

Published by: user1950227 on October 1, 2012 12:06
Table of link renamed in DDL.

davebcast wrote:

The following SQL statement has been identified as a bad performance. It takes ~ 160 seconds to run, but similar (indicated below first statement) SQL statements run in ~ 1 second.

Keep in mind that the enforcement timeframe has elapsed is a poor metric to use for benchmarking of SQL. The reason is that the same workload does not mean that the same elapsed execution time.

The workload for example shows a block of 1000 readings. There will be a difference marked by this workload reading data of the slow physical disks, or making this workload by reading data from memory in memory cache. And if it happens to be in memory or on disk is a kind of "random" thing (depends on many environment and factors of execution).

Thus, rather than measure the elapsed time and use it to compare, rather compare actual workloads. A workload of 500 block reading is faster and better than a block of 1000 DSL - despite the fact that a point of elapsed time can show the 500 read being slow (e/s physical) block a block of 1000 to read (e/s logic).

Many problems with the runtime Adobe AIR for Android

I created an application on Adobe AIR for Android platform, which requires for AIR. The app is very popular in the Android Market, but many users complain of problems with the installation of the Adobe Air runtime.
For example, these users phones: LG LGE-P698, LG Pecan, HTC Wildfire. But judging by the fact that users have access to the installation of the Air, their phones are compatible with it.
Tell me how to solve the problem?
In addition, I have a few questions:
1. Decides that the problem of demand for export with built-in AIR runtime?
2. I have create my applications using ADT. In this case how do I seal AIR runtime?
3. is it possible to invite the user to download and install older versions of AIR? Where can I find her?
I hope I can help, because the problem is global.

Hi Astraport,

I think you should integrate the air in your application runtime,

Some time ago I wrote a step by step guide, take a look at this post:

http://forums.Adobe.com/message/3961579#3961579

I hope it helps

So many problems

Similar Questions

Maybe you are looking for