So that the eject USB Flash drives, him still lights after the ejection, unlike windows XP

Similar Questions

• I recently downloaded my favorite CD music in my I tunes library, how can you transfer this music on a USB Flash drive so that I can play the music through my stereo system H D - Bike. I'm 10 Windows on my PC

  I recently downloaded my favorite CD music in my I tunes library, how can you transfer this music on a USB Flash drive so that I can play the music through my H D - bike

  stereo system.

  I'm 10 Windows on my PC

  Select the songs in iTunes, let them slip into a file Explorer window showing the flash drive, drop.

  TT2

• Laptop HP 17 p100: how the usb flash drive big that I have to create a system of 10 Windows Recovery?

  How the big usb flash drive do I need to create a system of 10 Windows Recovery?

  Yes

  Hello;

  Let me welcome you on the HP forums!

  There is really no way accurately guess in advance, with one of the reasons being that the options are available when you do this.  An option creates a recovery drive minimum with what is needed to repair the operating system.  Another option creates an image that is able to completely restore the operating system and its partition.  Thus, the size can vary from 4 GB to the size of the partition to the OS.

  Myself, I found as build-in recovery to be unreliable, especially those of Ms.  So instead, I use a third-party imaging/restoration solution known as Macrium Reflect.

  What I recommend is the following:
  (1) download and install Macrium reflect (MR)
  (2) run M. and choose the option: "Create an image of the partition (s) required to backup and restore Windows" to write a full backup to an external drive or USB key
  (3) use the option to create a CD or a USB startup key

  My experience is that SIR, when you use the option of Compression high, typically allows to compress the image file recorded at about 50% of the space USED in the OS partition.  This means that if you have a 40GB and 80GB OS partition is used, MR must only about 20 GB to store the image file.

  I use all the time and it usually takes less than 10 minutes to make the backup of the image and at the same time or less do a restore.  In addition, MR has the ability to add a recovery Boot Menu entry.  This then allows you to boot into Windows re, and then you can use it to do a restore - when you cannot start Windows!

  NOW, you have the means to restore a full system that works for the external hard drive or USB key in a few minutes.

  Good luck

  I'm a volunteer and I do not work for, or represent, HP.
  ========================================================================
  If you feel that my suggestions helped you, please click on the thumbs-up symbol to say thank you!

  If they helped to solve your problem, please click 'Accept as Solution' to help others find similar information.

• 16 GB HP v165w USB Flash Drive need to use for the backup

  I let my friend use my new port thingy (USB key) and it was brand new. I'm not good with computers and I need to use it to back up my system and it keeps giving me options of media when I plug can in. someone help me clear it and explain how to do the back upward with a usb flash drive

  When you say "he keeps giving me...". ", what is"it "?  Are you saying that WIndows asks if you want to, say, open the device with Windows Explorer or do nothing or some other options?  It is the Autoplay detect that a device has been mounted and asking what you want to do.  Tell him not to do anything or to open it in Windows Explorer and then check the option always use this choice.

• the guest account can access encrypted USB flash drive?

  So here's the scenario

  I encrypted an external usb flash drive.  If I have access to this USB key, enter my password, decrypt the USB key. then close the session,

  and go to access as a guest (ALWAYS logged IN MY ACCOUNT) so that the family can use my computer,

  What happens to someone else, they can access the flash drive which has been deciphered from my account?

  should not the external drive is accessible to the account, that it has been deciphered?

  Once the drive is mounted (enabling access through decryption as well) is accessible to all users.

• HP Elitedesk 800 G2 SFF: external hard drive not detected in the BIOS. Only USB Flash drives are detected.

  Hi all

  I received recently 2 new HP desktop computers.

  HP Elitedesk 800 G2 SFF

  HP Elitedesk 800 G2 TWR

  The goal is to test our real W7 x 64 image on these machines and to inject the missing drivers in the image.

  MDT 2010 to create a deployment on a USB hard disk drive.

  This disc of deployment is already used on 16 different models of HP in the company (Elitebook, zBook, EliteDesk) to install our image so I know it works.

  Unfortunately, the two HP Elitedesk 800 G2, I can't start the boot disk but I cannot to USB for a USB key.

  The USB drive is not detected and not proposed in the BIOS Menu of STARTUP.

  Only the internal HD, external USB Flash Disk, DVD and network devices are detected.

  Here's what I already checked or tried:

  • Latest Version of the BIOS installed (2.05)
  • UEFI Boot has been disabled. (not supported by our record of deployment)
  • USB ports are enabled (front and rear).
  • All types of USB devices are allowed in the BIOS
  • The start command has been changed to start with USB devices.
  • Legacy support is active and Secure Boot disabled
  • Delete the keys to secure boot
  • Reset secure by default startup keys
  • This morning, I created a new disk deployment on a USB Flash drive and it works!

  So, it seems that only Flash USB drives are detected.

  I know it is possible to return the flag removalble on a USB device to cheat the system and make it appear as a disk fixed, but I want a simple solution.

  Does anyone know a fix or a workaround for this problem?

  Thanks in advance!

  For those interested in the answer, here's the final results.

  It turns out that the hard 500 GB external drive can be detected if it is fomatted in FAT32.

  It's strange because my 16 GB USB Flash drive formatted in NTFS works very well.

  In any case, I'll create a FAT32 Partition to the Boot MDT files and put my picture (because the file is too big for FAT32 partition) on the secondary partition (formatted as NTFS).

  Thanks to the technical pre-sales team of HP who helped me with this!

• cRIO: build the path to write tdms file on a USB flash drive

  I wrote the code in figure 1 below, for open & create a file tdms on my USB flash drive that is plugged into the USB cRIO.

  The added path tdms is shown in figure 2 below.

  But I get the error in figure 3 below. I wonder how I can solve this problem.

  

  

  

  Cashany,

  Make sure that the USB is formatted in FAT32 as the cRIO cannot mount NTSF or other file systems.

  In addition, and this is potentially very important:

  There is a known memory leak problem that is easy to avoid the code with the help of PDM on the cRIO (without code changes!).

  This problem only occurs on vxWORKS targets (e.g., cRIO-9014), not on the PharLap targets (as I know).

  The problem occurs when you close a PDM file reference, the vxWORKS OS can't properly unload the PDM library. Next time you open a PDM, the library reference is loaded again, if for a very long time you will run out of memory.

  The solution is very simple:

  on your cRIO, locate the file or - rt.ini, then scroll down to the section [LVRT] of the ini file and locate the key called "StartupDlls".

  Make sure 'tdms.out' is included. For example, according to your cRIO, it may look like this:

  StartupDlls = nisysrpc.out; NiRioRpc.out; NiViSrvr.out;

  In this case, you would change the line to look like this:

  StartupDlls = nisysrpc.out; NiRioRpc.out; NiViSrvr.out; TDMS.out;

   

  This will prevent the LabVIEW runtime on the cRIO trying to unload the PDM library, forcing to be in memory of start up to eternity. This avoids the memory leak that you would otherwise experience.

  Good luck!

  Q

• What is the best method to add data to a file stored on a usb flash drive to avoid too many write cycles?

  Hello

  I'm trying to store an important data on a cRIO sampled stream in the USB flash drive.

  I believe that there are two ways to add data to a file:

  1. open the file outside of the loop, then write to the file loop, then close the file outside the loop.

  Pros; More quickly and efficiently than the opening and closing of files in a loop is resource heavy equipment.

  Disadvantages; If the program fails partially through, all data is lost.

  2. open the file, write to the file and close the file, all in the loop.

  With the advantages and disadvantages as opposed to option 1.

  As my cRIO is finally deployed in a hostile environment and data are valuable and processing speed is not an issue of concern in this project, I'm leaning towards option 2, but after a few basic calculations that I realize that I'll be writing/opening/closing the file of thousands of times and I wanted to know if this will wear out the flash memory?

  My uncertainty is due to not understanding what happens when a file is opened written to and closed.  He writes the new data to new areas of the flash, or it write all data on top?  The latter would cause me problems not too long term!

  Any help gratefully received.

  A big thank you and best regards,

  Ed

  The 'magic' is not in the File Format (PDM vs vs binary text), but in the "life" of the file.  This solution creates a file of 24 hours and maintains a different file for each day.  If the USB "dies", you lose everything you have not backed up somewhere.  If the program dies (or errors), you lose the data for the current day.  You end up with multiple files (which can be a more or less), but we must still make the trade-off between (duration) of the file and the file number opens (which relates to your concern for the longevity of the USB).  By the way, I suspect that a good quality USB key (it's what you mean, right?  Or do you mean a hard drive USB powered?  Comments probably apply both) can predict today to not die on you, everything just because you make a lot of reads/writes (of course, you could get in-a-thousand...).

  Bob Schor

• I am the computer ilitarate, can you tell me how to use a usb flash drive

  I REALLY DON'T KNOW MUCH ABOUT COMPUTERS, YOU CAN ME TELL HOW TO USE THE USB FLASH DRIVE? PLEASE,

  Monday, June 11, 2012 19:56:32 + 0000, maria m.romero wrote:

  I REALLY DON'T KNOW MUCH ABOUT COMPUTERS, YOU CAN ME TELL HOW TO USE THE USB FLASH DRIVE? PLEASE,

  Plug it in and it is almost exactly like any other drive. The
  the only thing that is really different in this regard is that you can easily
  Unplug the unit and plug it into another computer.

  Do you have a? What is its size (GB how?)? Why did you buy it?
  What you do with it?

  Ken Blake, Microsoft MVP

• Split 13 x 2 PCs 13-m110dx: cannot perform the system recovery using a USB flash drive

  I just bought a Split 13 x 2 13-m110dx PC that came with Windows 8. I have upgraded the OS to 8.1 and made a copy of the recovery Partition using a USB flash drive, and deleted the recovery of the PC disk that I learned that I could do. However, when I tried to retrieve OEM provided using the USB flash drive by following the directions at creation and use of a recovery of Microsoft USB drive (Windows 8) "System Recovery" was not available to the title of "troubleshooting." I tried to tell it to boot from the USB, but it askes me to insert the support of windows or other media, but rejects the flash player. What do I do now because I have not all discs?

  To use the Flash created to restore the system to the factory settings, see "Recovering from a USB flash drive" appearing in the following link:

  HP computers - running a HP System Recovery (Windows 8)

  HP System Recovery allows to reinstall or restore a HP with Windows 8 computer to the way it was at a previous time.

• How to replace a bad IDE disk with a USB Flash drive system - and have all the functionality of XP Pro SP3

  How to replace a bad IDE disk with a USB Flash drive system - and have all the functionality of XP Pro SP3
  Given a PC without hard disk...
  How can you use a flash drive instead?
  So, indeed, the USB key works as an SSD...
  I saw online options that gives partial functionality of the system... and an option that is more than $100 (more than the system's worth)...
  None of these options are acceptable in the circumstances.
  It is an effort to create a machine for a particular use, built from a recycled pc for which hard drive was removed and destroyed by the original owner...
  The criterion is that it must work just like it was a mechanical drive running xp pro sp3 with all updates, etc...
  Thanks for any help.

  You can not install XP on a Flash as his unsupported drive. Your only two options are a traditional hard drive or Solid State Drive (SSD).

  J W Stuart: http://www.pagestart.com

• follow-up to the issue of data on a USB flash drive recovery

  HP instructions say that the 32 GB flash drive has NOT should be labeled as Windows 8 compatible.   I bought a Sandisk 32 GB yesterday for $20 on sale, but it says on the back that it is compatible.

  More / or less expensive flash drives did not address if compatible with Windows 8.

  I have Windows 8.1

  Thanks in advance for your help...

  Hello

  If the flash drive is listed as "Windows compatible 8" may not be used - the reason is that the creation of HP recovery media software is seeking a device marked Win 8 compatible show as internal drives flash drives and external .

  In the example below, the 32 Gb flash drive USB 'Dave G' shows as a drive hard internal who can not be used, while the USB flash drive "Removable disc H" would work.

  

  Kind regards

  DP - K

• Forcing USB Flash Drives to use the specific drive letter

  Here, at my work, we have a problem with USB Flash Drives. Whenever someone brings their own, will not be assigned to any drive letter available that is given as a shortcut (B, F, G). Is there anyway to tell XP to assign the USB Flash always drive to say F:?

  Scarlath

  Search and read about the software USBDLM.

• How to export photos to the photo gallery Windows on a USB Flash drive

  I can't transfer photos from the photo gallery on a USB flash drive, it can be done, but I need help

  The following steps may be worth a try:

  In... Photo Gallery, select the pictures you want to add in the flash player.

  The group selected (highlighted) right click and choose... Copy.

  Reach... Start button / computer... your USB key must be recognized by a drive letter.

  Right-click on the drive letter that represents the flash drive and choose... Dough.

• Windows does not recognize the USB flash drive

  Hello
  My USB does not work when I plug. It seems that Windows recognizes the device because it is found in the Solution Explorer window, but if I want to create a folder or a file on the USB key I have the following message:
  "Cannot find this article.
  It is no longer in < %3="" null :="" optext=""> . Check the location of the components and try again. " < br=""> also the files that are copied to the USB flash drive are not visible in Explorer and it looks like the drive is empty.

  I want to emphasize that the same (Kingston) USB flash drive works perfectly under Windows XP operating system on another computer so it may not be a problem with the device. The same problem also appears when you use a different USB (another manufacturer).

  Thank you!

  Hey, 101 a.

  , I just posted a fix I found for my USB flash/go to work again.  It was a very simple solution, too.

  I unplugged all USB devices first, then tried my USB jump drive again.  IT WORKED! I've narrowed the problem to the new printer that I use.  It's a Mono Dell Laser MFP 1125.  Whenever it is plugged into a USB port, my USB doesn't work.  All other devices work, but not the USB is the printer is connected

  I don't know what done to block the flash/USB key, but unplug printer allows the jump command to work again.  I will contact Dell on what did the printer driver to block the flash player.  Just an info on the fix I found.