Software Client AnyConnect lack of Flash

Similar Questions

• Profile of the client Anyconnect ASDM - cannot change preferences

  Hello

  I operation set up vpn, my problem is that I am putting in place beginning anyconnect before logon. I navigate to the section of the profile client anyconnect in the vpn for remote access and create a profile xml file by clicking on the Add button. I can add a new profile, but as soon as I save the file I can no longer change it. Change is dimmed and if I double click on the file the asdm will return the error: "entry is not a well-formed XML file, schema compliant."

  I am running the following versions of the software:

  ASDM: 7.1 (5) 100

  AnyConnect: 3.1.05152

  ASA: 8.2 (3)<----asa hardware="" doesn't="" support="" running="" a="" newer="">

  I was not able to find any info on this particular problem, but maybe someone here can help?

  Hello Ryan,

  You have the same problem if you download AnyConnect 2.5 and perform the same task?

  Also, have you tried this operation from another machine and the old version of JAVA as 1.6?

  HTH.

• AnyConnect Client AnyConnect communication

  Hello

  We have users that are connected via AnyConnect that cannot communicate with each other using their software phones during extension call. They can communicate with each other when using 7 digits well. They use Split tunnel and we have unchecked network list under the internal policy of the Group and added the AnyConnect subnets. They can call for any other network but network AnyConnect. Is there a defect that does not allow AnyConnect AnyConnect communication?

  Also, I got their firewalls, turn to users and they still couldn't call or ping or tracert.

  Is it possible for a client AnyConnect ping on another AnyConnect client that is on the same subnet?

  Any suggestions?

  Thank you, Pat.

  You can remove the following because it is not necessary ("clear xlate):

  NAT (outside, outside) static source AP-SSLDHCP destination interface static any_vpn any_vpn

  It's OK that the OSPF is advertising and redistribute, so not know internal OSPF routers to send the 10.3.8.0 subnet to the ASA.

  And when I say roads that overlap, I mean when you have for example 10.3.8.0/21 pointing inward, you need to configure more specific routes (10.3.8.0/22) pointing outward. Otherwise, it's going to be routing inwards and the loop since the supposed to exist outside vpn pool. Routing should be good, because you can access internal networks, so I wouldn't change anything regarding the roads.
  

• Client AnyConnect and Sprint 4G

  I have a couple of ASA5520, used to access remote vpn. We use the customer client Anyconnect AnyConnect 3.0.2052. Many users use Sprint and is beginneng for cellular modems capable of 4G.  Users cannot connect through 4G.  They get an error message indicating that the AnyConnect client could not verify changes to the transfer table.  However, using the same material and the same Sprint cellular modem (Novatel) software, they can connect using 3 G. I've seen this with Windows using Windows XP clients.

  If anyone else has experienced this?

  Doug,

  There was a recent bug filed against this problem and should be already set in 3.0.4xxx

  http://Tools.Cisco.com/support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCtq95503

  But then again, not sure if problem would or would not continue for your pair of dongle/operator.

  M,

• Problem installing Client AnyConnect Secure Mobility Client 3.0.3054

  Hi all

  This is my first post and I hope that someone can help me with my problem.
  I'm trying to install the Client AnyConnect Secure Mobility Client 3.0.3054 on my PC (Windows 7 Professional 32 - bit operating system) and
  I get the following errors.

  Cannot install the Client AnyConnect Secure Mobility Client 3.0.3054 with the Installer error: fatal error during installation. Cannot establish a VPN connection.
  The acsock service failed to start due to the following error: a device attached to the system does not work.
  Please notify.
  Thank you.

  Anna,

  I had the same problem. Have you found the solution in some way?

• VPN Client AnyConnect 5 migration

  Dear community

  We are migrating the old Cisco VPN Client 5-Cisco AnyConnect.

  I have a couple of ASA-5510 9.1 (1) running the code with a license Base and in the current configuration, all remote users is in the VPN using standard methods of IKE/IPSec with their laptops (no split tunneling, nothing fancy). The VPN Client currently has a profile that is imported into each user's computer and has a pre-shared key that is stored, the solution works very well.

  Management has decided to go for the more AnyConnect version, rather than Apex which I believe meets all our requirements (preview here: http://www.cisco.com/c/en/us/td/docs/security/vpn_client/anyconnect/anyconnect40/feature/guide/anyconnect40features.html).

  I have three questions about the migration of Client AnyConnect VPN:

  (1) currently my ASA shows that AnyConnect is disabled (see attached screenshot to see the version). Can I upgrade the license on my ASA? If what comes with AnyConnect or do I need to order it separately?

  (2) is it possible to use the AnyConnect VPN Client VPN profile or should I create a new one?

  (3) can someone direct me to a guide for remote access VPN configuration using the rather than the old VPN Client AnyConnect client? Are there any caveats / pitfalls, I should be aware of?

  Thank you very much!

  Best regards
  Martin

  1 order the AnyConnect license you will get a PAK that you can redeem on the auto-serivce portal to get an activation key for your ASA. (You will need the serial number ASA as well.) This will allow you to "Essentials" AnyConnect (former name for more have together (which now includes Mobile), more or less) and allow you to run the command "anyconnect essentials".

  2. the old style IPsec profiles channel not again SSL VPN ones.

  3. There are many many of them out there. If you are new to it, you can find Pete Long message on the blog useful How - to's:

  http://www.petenetlive.com/kb/article/0000069.htm

• using the group name and password group in client anyconnect

  Hello. Is it possible to use the group name/password of the legacy in customer cisco anyconnect vpn client? I checked the AnyConnect Administrator's Guide ' VPN XML Reference"and found nothing on this subject.

  It's true.

  AnyConnect Secure Mobility Client (VPN Module) can be used to connect to both types of VPN remote access:

  1. full SSL VPN tunnel

  2 IKEv2 VPN IPsec.

  The legacy VPN client is used only with the old IKEv1 IPsec VPN and you cannot use this type of VPN client AnyConnect.

• Scripts &amp; profile Client Anyconnect

  Hello

  I configured a client anyconnect profile that's train to be ousted to end users. In this context, I have enabled scripting and transferred two scripts to the ASA (scripts_OnConnect_logon.bat & scripts_OnDisconnect_disconnect.vbs).

  If I connect the VPN client and download the client Anyconnect (new installation), everything works fine IE I get the profile and two scripts.

  If I then remove the scripts and the profile of the end user and you reconnect using the anyconnect client, I receive the profile, but not scripts.

  Can someone help with this problem?

  Kind regards

  Terry

  Currently, this is how it works by design. In case you want to push the script once again,

  Delete the file VPNManifest.dat of the Anyconnect folder and connect

  with the customer. First time I think that scripts will not be pushed. The second time, you'll see the script in the folder.

• Client AnyConnect on Macbook Air

  Hello

  For the client Anyconnect on the Macbook Air, IPSEC) 1 can be used?, 2) split tunneling is disabled?

  Hello

  For Mac:

  AnyConnect

  Activation of the IPsec IKEv2 connections

  OPERATING SYSTEM	AnyConnect 3.1 Predeploy the Package name
  Mac OS X	AnyConnect-macosx-i386 - k9.dmg

  Mac OS X

  Table 8 Mac OS X support modules and the new features in 3.1 AnyConnect

  AnyConnect Module 3.1	Feature	Mac OS X 10.6, 10.7, 10.8 x 86 (32-bit) or x 64 (64-bit)
  	Comments from customers	Yes
  VPN	Kernel	Yes
  	IPv6	Yes
  	Suite-B (IPsec only)	Yes
  Network Access Manager	Kernel	NO.
  	IPv6	NO.
  	Suite-B	NO.
  Posture & Hostscan	Kernel	Yes
  	IPv6	Yes
  	Keystroke logger	Yes x 86 (32-bit) only
  Web Security		Yes
  DART		Yes

  Cisco IPsec client

  The Cisco IPsec client only is not currently supported with MAC OSX 10.6, but the built-in MAC VPN client can be used. The current configuration of head IPsec used for current users of Cisco's VPN IPsec Client should work with this client.

  Split tunneling can be turned off (just choose tunnelall)

  ASA 8.x: allow the tunneling split for AnyConnect VPN Client on the example of Configuration of ASA

  Please check the following information:

  Deployment Client AnyConnect secure mobility

  Release notes for Cisco AnyConnect Secure Mobility, version 3.1 Client

  Thanx.

  Portu

  Please note any workstation that you be useful.

  
  

• AnyConnect image in Flash for the Anyconnect customer login

  Hi dear.

  Is it necessary to have an Anyconnect image in the flash of the SAA for Anyconnect users connect to it.

  I had a user who got to MAC OSX and tried to connect to a firewall using Anyconnect but failed because the MAC OSX Anyconnect image was not uploaded to the firewall. However, he could successfully connect to another firewall, in which the image was present. So it will be also the case for Anyconnect for Windows. And also does it really matter which version of the image is present in the flash as long as you have the picture for this operating system platform

  Thank you :)

  Any valid image for the client OS will suffice.

  If the version of the client is more recent, they will keep it.

  As you may have noticed, if none is available (and specified as one of the AC images), the client will not be able to connect.

• If you use firefox for linux, I'm unable to open the game client for a called flash browser game darkorbit.

  I'm using Linux Mint 17.2 xfce.
  The Firefox I use is 42.0 Mozilla Firefox for Linux Mint Mint - 1.0.
  Shockwave Flash is 11.2r202.
  The browser Flash game is DarkOrbit ( www.darkorbit.com ).
  The game was working fine until about 2 months ago.

  I log in the game (as before) and get on the last page without any problem.
  When I click on 'Start' to go to the game client, the screen is black. The browser tab written game client will blink twice.
  Please note that everything works fine when I use the chrome Web browser.
  DarkOrbit works very well with Firefox on Windows.

  Is there a way to use the pepper Flash used in Chrome/chrome using the freshplayerplugin wrapper.

  Your Linux distro may have related packages for it.

  Alternatively, you can use Chrome or chrome for that one site and use Firefox for everything else.

• Connection to the local network after the connection to the Client AnyConnect Secure Mobility Client

  I connect to my network of business using Secure Mobility Client of Cisco AnyConnect.  Once connected, I can no longer print on my printer LAN attached and other local resources.  I use the router E4200 of Cisco/Lyncsys on my local network and can re - connect to storage on the local network by putting in place of Port Forwarding port 21 and the sharing of MS Windows FTP folders.  However, I can't connect to a client of the Terminal Services by transferring port 3389.  Is there a way to connect to the local LAN after scoring in the VPN connection.  I can connect to sites HTTP/HTTPS regulars and more than another type of connectiins, just not my own local resources.

  Thanks in advance... JS

  Happy to help, for what it's worth. Please mark question as answered if it is indeed and rate if the response is useful.

• Cannot type 'functions' without client Anyconnect VPN setup

  Hi I am trying set Anyconnect VPN client based on Cisco documents below. There is a command like below. When I typed 'function', I can't enter. Can anyone give me some suggestions? Thank you.

  internal GroupPolicy1 group strategy
  attributes of Group Policy GroupPolicy1
  Protocol-tunnel-VPN IPSec l2tp ipsec webvpn
  WebVPN
    functions entry url file-access file-exploration of the mapi port forward files filter entry
  HTTP-proxy download automatic citrix

  http://www.Cisco.com/c/en/us/support/docs/security/ASA-5500-x-series-NEX...

  ASA-recent versions, it is configured without the keyword "functions":

   asa(config-group-policy)# webvpn asa(config-group-webvpn)# ? Group-policy WebVPN commands: ... file-browsing Allow browsing for file servers and shares file-entry Allow user entry of file server names to access filter Configure the name of the webtype access-list ... port-forward Configure the name of the Port Forwarding applet and auto-download options ... url-entry Control the ability of the user to enter any HTTP/HTTPS URL url-list Configure a list of WebVPN servers/URLs

• Can not type 'url-list' without client Anyconnect VPN setup

  Hi I am trying set Anyconnect VPN client based on Cisco documents below. There is a command like below. When I typed 'url-list', I can't enter.

  Here is example of Cisco:

  WebVPN
  allow outside
   list of URLS ServerList "WSHAWLAP" cifs://10.2.2.2 1
   list of URLS ServerList "FOCUS_SRV_1" https://10.2.2.3 2
   list of URLS ServerList "FOCUS_SRV_2" http://10.2.2.4 3

  Here's my ASA:

  VPNFW-70/PRI/Act(config-WebVPN) # url -?

  set up the mode commands/options:
  URL-block url-url-cache server

  My ASA has no choice of the list of URLs when you type '?

  Can anyone give me some suggestions? Thank you.

  http://www.Cisco.com/c/en/us/support/docs/security/ASA-5500-x-series-NEX...

  Hello

  In the 7.x code all customizations without client was included in the running configuration.
  However, referring to this document from cisco:- http://goo.gl/XRkrcO, you can see that this command has been deprecated in 8.X ASA codes.

  The best way to configure the bookmarks will use the ASDM or create them on a server and then bring import them to ASA.

  Why we can not create bookmarks CLI?

  With the introduction of 8.x many more options have been added, allowing greater flexibility.  These new options would make the running configuration passes, so they were moved into separate xml files.  Indeed, it eliminated the ability to configure a list of bookmark via the CLI.

  For more information on this discussion, please refer to this thread: -.
  https://supportforums.Cisco.com/discussion/11010546/how-do-i-create-URL-bookmark-WebVPN-Portal-CLI

  Kind regards
  Dinesh Moudgil

  PS Please rate helpful messages.

• Client AnyConnect and connections without client hang for two users

  ASA 5525, v.19 9.1 (5)

  AnyConnect client 3.1.02026

  I have two users who are unable to connect through the AC client or no client via the web portal. The use of the client, it will get stuck in a loop of "check updates". On the portal, the connection will proceed to point "Cisco Secure Desktop validated successfully... Success... Reloading... Please wait. "Then it crashes here.

  This problem occurs for the user, no matter which company laptop it connects to. A help desk technician can use his laptop computer and connect properly, but she could not connect on his own laptop computer or on another laptop. (Same for the other user.) So the question does not appear to be linked to his laptop or the installation of the CA. (Helpdesk reimage her machine early in the process of solving problems before they realized that the question seems to follow the user.)

  I've updated the hostscan - no change in the results file.  Client and clientless connections seem to work for all users. We are puzzled.  Suggestions, anyone?  Thank you!

  The LDAP protocol must be people - Active Directory server.  Chances are the one who manages the SAA should have access at least to look at Active Directory to look that up.  If they are not they need.

  Of course, I don't know a lot about what you use the devices, but if you use ISE, there should be a type of device MNT (monitoring and troubleshooting) - collecting newspapers and, hopefully, they are sent to a certain type of overall collection of syslog (splunk?) tool.

  Otherwise, there should be a device called a CAM (Clean Access Manager) who collects newspapers - which can also be spread to a global tool for syslog - but with cam, you can pull reports from the output in a file delimited by commas (.csv) and pass through them that way.

  -The thing that annoys me, is he gets to two users any computer, they try to connect to any network to which they connect, and other users can authenticate and access network on these same devices.

  -That is why it is rather confused.  Pretty much saying, there must be something with:

  -the pool of intellectual property that they get an IP of

  -their powers AD

  -user name

  -something in this sense, if the information provided is accurate.