SOLUTION for your HP printer disconnect and/or constantly disconnecting from the network

Similar Questions

• Satellite A200 Win8 64bits - Atheros AR5006EX disconnects from the network at random

  First of all, sorry for my bad English.

  Hi, I installed W8 a few weeks ago and I have a problem with the WiFi. The adapter disconnects from the network at random. Not a protocol TCP/IP fail because I don't lose the connection to the internet, I lose the connection to the network for everyone.
  Simply disconnected from any wifi network.

  I have read that wifi chips Qualcomm have problems with drivers in W8. I tested many pilots and all do not work properly.

  Any help?

  The wifi card is: Qualcomm atheros AR5006EX and the laptop is: Toshiba satellite A200-1TP.

  Drivers I tested (and didn't work):

  http://drivers.Softpedia.com/get/network-card/Atheros/Atheros-AR5006EX-WLAN-driver-300119-for-Windows-8-x64.shtml

  Thank you!

  Do you have these problems with the operating system supported?
  I mean A200 is pretty old machine and certainly not supported for Win8, so it can be a problem with all of this, especially with the drivers.

  Let's see if someone else has the same machine and have the solution to this.

• Current file to use when it is disconnected from the network wireless/wired - shared network drive

  Hello

  We have a problem where we receive a "file in use" message when you are disconnected from the network. To reproduce the problem, what we do is:

  (1) connect to the wired network wireless disabled with

  (2) create a test document

  (3) to enter text and save on network share

  (4) remove the network cable

  (5) add additional text

  (6) reconnect the network cable

  (7) try to save the file to the network share

  At the beginning by clicking the X is the new message you want to save. Click Yes and the message arrives until the next time you hit the Hit of X no. and he loses the last change.

  From here we then go up to the network share, open the file and it comes up with "file in use. Open read-only. File is opened by us (Administrator account), and there is NO temporary file in the shared folder.

  Tried so far:

  -Run net config server/autodisconnect:-1 for trying to stop it disconnect the share

  -Checked pane, pane preview and off 'display the description of the pop-up window for folder and desktop items '.

  -Windows Update

  We try to reproduce on wired connection, because it is easier to reproduce that disconnects wireless. Seems to have an impact on several operating systems. Share folder is shared on a Windows 2008 R2 x 64 machine.

  Is this a known problem or is there something that we can configure to try to prevent the locking file after logging out? Ideally, we want the decline to go unnoticed and provide uninterrupted service to the user, unless they are trying to save during the fall.

  Thanks in advance for comments :)

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• After time computer disconnects from the network

  When I connect to my domain I can open my outlook uses exchange server without password, share my printer on the network, and access to network files.   After some time the printer is disconnected from the network be connected (always available for me no network) my email brings me a password and all shared network files ask me for a password.

  My computer is windows xp pro, we have 2 other xp pro connected machines that do not have this problem.

  I also never lose my internet or the ability to access any network files that I just asked for a username and pword after a few minutes.

  Only way to fix the printer and the problem is a reboot and relog in.

  Hello

  Questions like these are much better handled in the TechNet IT Pro Forums.

  My moderator tools cannot transfer messages on Windows forums, please re - ask you question there.

  http://social.technet.Microsoft.com/forums/en/itproxpsp/threads
  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Disconnecting from the network home

  Win 7 I have a stand-alone computer (not other computers) with a USB - connected printer and a connection to a modem (without router) via a network (?) (not USB) cable.  I have no other computers or printers.  Win 7 connected me to a network home, maybe because my printer is compatible with wireless (but I have no WiFi - or interest in functionality).  If I disconnect the home network I lose the internet connections or printer?

  My apologies but I found your statement at the opening a bit confusing.

  Your home network is connected to the modem, a local area network, and is a type of HOME that helps your computer share with a reliable source, connected to your modem/router.

  A HOME network is essentially the default setting...

  A PUBLIC network limited with any computer that can be attached to your router/modem to share files.

  If your printer is connected via a USB cable, disconnect from the network will NOT affect the communications between your computer and the printer and the printer will do what you expect it to do.

  However, you will lose Internet you disable the network connection.

• BlackBerry Curve 9300 Smartphone disconnects from the network - no BBM, email etc. - send or receive

  My Curve 9300 worked very well during the past year, and all of a sudden the phone seems to disconnect from the network without code error etc. Accordingly, no calls or output can be made / received, emails and BBM surveys the same question. All indications are that the service is running. The SW is version 6 and apparently is up-to-date. Any suggestions?

  peterle8295 wrote:

  My Curve 9300 worked very well during the past year, and all of a sudden the phone seems to disconnect from the network without code error etc. Accordingly, no calls or output can be made / received, emails and BBM surveys the same question. All indications are that the service is running. The SW is version 6 and apparently is up-to-date. Any suggestions?

  Hello guys

  Welcome to the community

  Sorry to hear about these issues. Please, try to contact your carrier and check your Blackberry data Plan.

  Ron

• How to distinguish between couples that comes from my TX CAN oppose and frames which comes from the network?

  HY,

  I have an object can pass data to the specific id.

  I expect to get frame from the network with IDs and similar data.

  How will I know that the data came from the network?

  (If I listen to the data of the CAN Interface, I can't distinguish the data that I convey and between data from the Internet)

  Thanks in advance,

  Aviad

  Since you are using NI-CAN, series 1, which does not support no matter what Self-reception, I assume you are using two ports CAN... make your normal transmission and the other to listen to the frames of the CAN bus?

  If this is the case, the only option I see for you would be to compare the charge received with the load transmitted to detect the images you send. This will only work if you send and receive different payloads, but it's probably something that's generally true. If it is false, then you really have no good option with the 1 series (or even series 2) and NI-CAN.

  We have a different product, OR-XNET, which provides a forum for independent reception (such as series 2 NI-CAN), but when you receive the framework that it contains a flag that indicates if it was received from the network or received through self-reception. It's of course far easier (and probably only guaranteed) way to achieve your goal.

• El Capitan 10.11.2 disconnects from the network of Canon printer macbook pro after each use but with the same OS version iMac remains connected

  How to prevent my Macbook Pro El Capitan 10.11.2 going to disconnect my network printer Canon?   My iMac running the same OS version don't unplug and behaves like any normal wireless connection.  I deleted the printer and added back, reset printing, etc. nothing works.  Given that the Mac is 6 "each other and 5 feet of printer during the last test, it must be something specific to the Macbook.  The Macbook identifies the printer after each reboot the printer as printer Canon right, but once the task is completed does not have the printer.  Everything is on the same wireless network. Computer Windows also recognizes the printer and it keeps alive after printing.

  Please read this message before doing anything.

  This procedure is a diagnostic test. It is unlikely to solve your problem. Don't be disappointed when you find that nothing has changed after you complete it.

  The test is intended to determine if the problem is caused by a third-party software that loads automatically at startup or logon, by a device, by a police conflict or corruption of system files or some system caches.

  Disconnect all devices wired except those required to test and remove all the expansion cards from secondary market, as appropriate. Start in safe mode and log on to the account of the problem.

  Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. Ask for additional instructions.

  Safe mode is much slower to boot and run as normal, with limited graphics performance, and some things work at all, including an audio output and a Wi - Fi connection on some models. The next normal boot can also be a bit slow.

  The login screen is displayed even if you usually connect automatically. You need your password to log on. If you have forgotten the password, you will have to reset it before you begin.

  Test in safe mode. Same problem?

  After testing, restart as usual (not in safe mode) and make sure you always have the problem. View the results of the test.

• Disconnected from the network when during a Skype call and a game at the same time

  Separated from: Skype calls randomly disconnects any Internet on computer

  Sorry to drum up an old thread but I've seen this same issue. Whenever I'm on a call on Skype and an online game, I get dced much.

  It's a wi - fi connection and I have to reset my wireless router to restore the link.
  Win7
  64 bit
   
  And Yes, this happens only when you use Skype.
  Thank you!

  Hello

  -What is the online game you play?
  -What browser are you using to play online?
  -Did you do changes on the computer before this problem?
   
  Method 1: If the issue is only with Internet Explorer while playing online games, I suggest you to follow the steps from the link and check if it helps.
  The problems of games online using Internet Explorer
  http://support.Microsoft.com/kb/2528246
   
  Method 2: To the question connects to Skype calls are disconnected, I suggest to maintain the computer in clean boot mode and check if the problem persists.
  A clean boot to check if startup item or services to third-party application is causing this issue.
  You can read the following article to configure the computer to boot:
  http://support.Microsoft.com/kb/929135
  Note: after the troubleshooting steps, see step 7 of the binding of boot is a way of putting your computer to normal startup mode.
   
  Method 3: If the problem persists, I suggest you to contact the Skype support for assistance.
  https://support.Skype.com/en/category/CONNECTION_ISSUES/
   
  Hope this information helps.

• Why my home wireless to disconnect from the network and disappear shortly after connecting?

  With the help of a new mobile phone Samsung; first day fine, no problems - attached easily and automatically to my home Wifi network (wireless router), several times. 24 hours later, the wifi network keeps becoming extinct, in other words, is not recognized by the card wireless laptop. I said it "disappears" because if I reboot, the wifi network appears as acknowledged, and I can connect briefly - but in a moment, she disappears. I can connect via ethernet to the same wireless router; and the same network wifi is recognized very well by two other laptops in the House.  Curious!

  Hi, Kat,

  Try this - how to repair your Wi - Fi, connection problems.

  http://www.PCMag.com/slideshow/story/262550/how-to-fix-your-wireless-Internet-connection-problems/3

  You can also try to turn the phone off, remove the battery

  Press the power button / stop for 30 seconds

  Put back in the battery

  Power system

  Open - laptop connection shows now?

  Visit the site of the manufacturer for bios updates

• Hard, my time capsule airport is connected to my network. I also use it as my Wi - Fi. The time capsule disconnects from the network periodically and does not restore I have to restart to reconnect. What problem I have

  Hard, my time capsule airport is connected to my network. I also use it as my Wi - Fi and the backup. He constantly falls the internet connection and I have to restart the so he can reconnect. What problem I have?

  What brand and model of your Internet modem you have the Capsule Time (TC) by Ethernet? What exact model of the TC do you have? ... and who is your ISP?

• Lose connectivity to the virtual computer on your laptop when you are disconnected from the network

  Hello

  I have a laptop with a Windows 2003 virtual machine (VPC 2007) with IIS 6.0, hosting a Web site for testing and development.

  Using Dreamweaver and navigation on the site of the XP laptop (VM host) works very well when the network cable is connected.

  Interestingly, this will work, but VERY slowly when plugged into an empty network switch.

  The virtual machine has the laptop computer adapter selected to work. I tried to use a loopback cable and it did not work. I also tried to add the MS Loopback Adapter but not had any luck with that when you set the virtual to use.

  Please can I have some suggestions, laptop user wants to work on this site with the virtual machine when you are away a network connection.

  Thank you

  Tom

  Hello

  Try a static IP on the same subnet to re-branded to map of loop back on the virtual machine and the host.

  Make sure that the subnet is allowed through the firewall.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• HP Officejet 5740: disconnects from the network

  IMac El Capitan & Airport extreme router

  Printer will connect and stay connected while Mac is turned off.

  Turn on the Mac and the wireless connection is lost

  In some cases "impossible to find the network" in others, bad IP address.

  Have you tried wiring printer to the router (ethernet USB) same results

  Also tried hard wiring for Mac

  and finally no. son... basically all with the same results.

  Have tried all the suggestions reboot router, Mac, printer...

  Connects and disconnects...

  Need help

  I wanted to leave you hanging...

  Contacted Comcast and said that my modem is too old and it to replace.

  Now, I have a new modem/wifi combo and everything works.

  It reminds me of the guy who bought a button of his jacket and ended up having to buy a new jacket for the button!

  In any case thank you for your patience, and all's well that ends well.

• HP Officejet 4620 is disconnected from the network, how to re - connect?

  I went through all the troubleshooting steps, I turned it switch on the computer power. All my other devices are connected to the network very well except for this printer. It is less than 2 months old and has worked fine since I got it and I not made any changes to anything.  He only stopped to be connected.

  I'm so frustrated... Please help?

  In order to re - connect the printer to the network, you will need to plug in your USB cable.

  1. click on Start Menu

  2. Select all PROGRAMS

  3. choose the HP folder

  4. go to Officejet 4620

  5. add printer or software product Setup &, it should give you option (convert USB wireless).

  With this printer, you need to install the USB printer first, and then convert it to wireless.

  Let me know if this can help, thank you.

• Get the latest data of Variable shared before disconnecting from the network

  Hello.

  I use Shared - published network variables for my communication between two PC's. Each LV software will pass the data to another.

  Sometimes the wireless connection to become really bad and the network connection stops.

  I want to get the latest data. Currently my VI will show the value '0' on the variable shared data once the connection is cut.

  I tried using shift, but she registers the same results.

  Can someone show me how I can stay past data when the network connection is disconnected.

  Thank you very much.

  Kind regards

  Hello Fan, Ravens

  It works! Thank you very much.

  Kind regards