SOLUTION TO INSTALL FLASHPLAYER WITHOUT PASSWORD!

Similar Questions

• 11 GR 2 grid Setup "SSH without password problem" on AIX 7.1

  Hello

  The installer was able to login SSH without password in configuration between the nodes, but when I tried to test it, and then I got the below error:

  [INS-06006] Connectivity SSH without password do not put in place between the following nodes: [ud1 UD2].

  I tried to install .ssh without password between node1 and node2. It worked.

  But when I tried to connect without a password with the Node1 node2 .ssh. It did not work. SSH asked a password.

  On node1, were among other id_rsa id_rsa.pub and identity and identity.pub. But on Node2, there was only identities and the identity.pub.

  any help will be greatly appreciated.

  Thank you

  When you configure the RAC, it is a mandatory task to configure connectivity without password SSH (Secure Shell) between the nodes. SSH connectivity configuration is essential among the nodes of a cluster because the YES program uses the ssh and scp commands internally during the installation stage to perform remote operations, in which it copies the software from local to other nodes.

  I suggest that you try once more configuration. I give below steps:

  (1), log in as the Oracle user on the first node in the cluster (in our example, it will be on the raclinux1) and execute the following sequence of commands:

  [orac1e@raclinux1]-$ mkdir ~/.ssh

  [orac1e@raclinux1]-$ chmod 700 ~/.ssh

  [orac1e@raclinux1]-$/usr/bin/ssh-keygen t rsa

  Generate the key pair public/private rsa.

  Enter file in which to save the key (/ home/oracle/.ssh/id_rsa):

  Enter the password (empty without password): enter same password again:

  Your identification has been recorded in /home/oracle/.ssh/id rsa.

  Your public key has been saved in home/oracle/.ssh/id_rsa.pub.

  The fingerprint of the key is: f0:89:ac:ba:83:31:c4:43:97:3e:9's: a5:60:c1:8e:e6 [email protected]

  (2) when the system asks you the location of the key, accept the default settings by pressing the Enter key. Once this configuration is done on the first node, repeat the same steps on the rest of the nodes (in our example, repeat the same step on the raclinux2 node).

  (3) now, switch back to the first node (raclinux1) and run the following command to add the authorization keys. After you add the authorization keys, copy the file authorized_keys to other nodes by using the scp command, and enter Yes when prompted.

  [orac1e@raclinux1]-$ cd ~/.ssh

  [orac1e@raclinux1]-$ cat id rsa.pub > authorized_keys]

  [orac1e@raclinux1]-$ scp raclinux2:/home/oracle/.ssh authorized_keys

  The authenticity of host ' raclinux2 (192.168.2.202) cannot be established.

  Of the key RSA is 52:13:31:e8: this: ec:47:b8:06:09:4 b: c9:aa:c5:35:81.

  Are you sure you want to continue connecting (yes/no)? Yes

  WARNING: Permanently added 'raclinux2, 192.168.2.202' (RSA) to the list of known hosts.

  Oracle@raclinux2's password:

  authorized keys 100% 406 0.4K8/s 00:00

  (4) now go back to the second node, (raclinux2) and run the following command:

  [orac1e@raclinux2]-$ cd ~/.ssh

  [orac1e@raclinux2]-$ cat id rsa.pub > authorized_keys]

  [orac1e@raclinux2]-$ scp raclinux1:/home/oracle/.ssh authorized_keys

  The authenticity of host ' raclinux2 (192.168.2.201) cannot be established.

  Of the key RSA is 52:13:31:e8: this: ec:47:b8:06:09:4 b: c9:aa:c5:35:81.

  Are you sure you want to continue connecting (yes/no)? Yes

  WARNING: Permanently added 'raclinux2, 192.168.2.201' (RSA) to the list of known hosts.

  Oracle@raclinux1's password:

  authorized keys 100% 406 0.4K8/s 00:00

  (5) after you add the authorization on the second node keys, copy the file to the other nodes using the command scp, as shown in the previous example and enter Yes when you are prompted.

  (6) after setting up the SSH installation successfully through all the nodes, we will perform the following test on each node, from the first node to connect without password between all nodes to follow the recommendations of the Oracle:

  SSH raclinux1 date

  SSH raclinux2 date

  SSH raclinux1-private date

  SSH raclinux2-private date

  SSH raclinux1 - sjh.com date

  SSH raclinux2 - sjh.com date

  -taking of Oracle 11g R1/R2 Real Application Clusters Essentials - Ben Prusinski, Syed Jaffer Hussain

• How can I re - install firefox without losing my data. It is infested bame ad.

  Firefox is infested with "ads name.

  How can I get rid of it or how can I
  Re-install firefox without losing any data?

  There is a rash that goes around, and the solution is not yet clear 100%. I suggest try reinstalling this way:

  Clean reinstall it

  We use this name, but it is not about the deletion of your settings, it comes to ensure that program files are-own and contain no alien code files. As described below, this process does not disrupt your existing settings. Don't uninstall NOT Firefox, that does not need.

  (1) download a fresh Installer for Firefox 37.0.1 of https://www.mozilla.org/firefox/all/ in an ideal location. (Scroll down your preferred language).

  (2) close Firefox (if applicable).

  (3) to rename the program folder

  (Windows 32-bit folder names)

  C:\Program Files\Mozilla Firefox
  

  TO

  C:\Program Files\OldFirefox
  

  (Windows 64-bit folder names)

  C:\Program Files (x86)\Mozilla Firefox
  

  TO

  C:\Program Files (x86)\OldFirefox
  

  (4) run the installer you downloaded in the #1. It should automatically connect to your existing settings.

  Any improvement?

  Note: Some plugins can only exist in this OldFirefox file. If it is missing something essential, present in these files:

  • \OldFirefox\Plugins
  • \OldFirefox\browser\plugins

• Grant access to an account without password?

  Hello

  Our Organization has a bunch of passwords for all kinds of accounts (e.g., social media, web administration, etc...). We have a team of consultants, accounts that we work who need to access some of these accounts. Is it possible to give them access to an account without providing the actual password?

  Example:

  -Hire us a consultant to manage our Twitter account for six months

  -We don't want to give them the real password, but still grant them the access somehow

  -At the end of the period of six months, we can cut access without having to change the account password

  Thank you!

  Phillip

  If it were possible to simply have anyone access the account, it would be a massive security breach. You will need to visit each service to see if you can add additional users for editing from this account.

  The best I can say is that you create a user account on Mac and set up the account for the "consultant" in an appropriate on the Mac application. If the user is familiar with the Mac, they may simply find the password in the keychain & view it, is not a good solution.

  Personally, I think that you may need to find a better solution to the management of passwords. It could be much better if you had a central location that staff can see and edit them & you can configure access controls to allow users to access (and revoke when they leave). If the password is synchronized really little matter how many times it is changed, it is just a few clicks away from recovery.

  1Password, LastPass and Dashlane have the features like this...

  https://agilebits.com/OnePassword

  https://LastPass.com/

  http://Dashlane.com/

  I don't know that too, there are similar services.

  Once the consultant leaves you can easily reset the password and all synchronized copies will be updated to other members of staff. It should give you better security (you seem to be avoiding to change the password by fear of having to tell everyone he has changed).

• HP 5530: Windows 10 / printer HP 5530 visible, ping-measure but "installing network without success" - workaround

  Windows 10 / printer HP 5530 visible, ping-measure but "installing network without success" - workaround

  (FYI)

  Problem: Windows 10 laptop (previously Windows 7) would not install HP 5530 wireless printer using the HP installation software.

  (Other portable, always running Windows 7, install the same software of the printer without a problem.) All computers had until then used a HP 5510 without problem).

  The printer can be "seen" by phone, via a router, in the dialogues of installation software, but 'installation network without success' has been reported: in other words, after identification and selection of the printer on the network, install "spun" for several minutes until the outage has been reported. (Installation by USB connection was successful, but still later without success in wireless network installation).

  Printer able ping go laptop all the time, and test page was printed wireless through the web page HTTP printer (e.g. 192.168.1.x) parameters.

  Firewall has been abandoned and latest drivers from the web site HP downloaded - however, Setup still not at the same point each time.

  Solution: In Windows 10, start menu: -.

  Printer Settings\Devices\Add or Scanner\Printer I want to is not listed\Add by the TCP/IP address [use the IP address identified from the display or printing settings printer] - check the box for pilot chosen automatically by Windows.

  (In other words, add the printer as a printer without using HP installation software at all.)

  Result: the printer is available (after restart) wireless on the laptop - seemingly normal and as a shared printer - wireless printing was possible.

  (Solved) (Apparently)

  According to the http://dfarq.homeip.net/2015/01/how-to-add-a-tcpip-printer-in-the-windows-10-technical-preview/

  Good luck to anyone with a similar problem!

  I'm still working 24 hours.

  (Solved) (Apparently)

• reset the macbook pro to factory without password?

  I bought a preowned pro macbook and didn't know that it had not been reset, so I still have stuff from all the former owner top. I need to get back to factory settings so that I can restart it with all my accounts but can't without password apple of the previous owner, who I have otherwise so need to reset the laptop.

  If the Lion or later then start Recovery

  OS X: on OS X Recovery - Apple Support

  and the boot disk to format and install OSX via recovery

  What to do before you sell or give away your Mac

  ID Snow Leopard or earlier boot to install DVD and format the boot disk and install OSX.

• Can I re install Vista without losing my files if I don't remember admins psswrd?

  Can I re install Vista without losing my files if I don't remember admins psswrd?

  "I have not forgotten the password, I have been locked by a very nasty BUG...". "

  If you had mentioned malicious programs in your original question instead of saying "I don't remember psswrd admins", I would have included this:

  Malware can also cause problems with passwords:

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  And here's how to go in Safe Mode options; Select safe mode with networking from the list of options:

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  See you soon.

• How to uninstall Symantec protection for endpoint without password.

  Original title:

  Installation of Windows 10

  How to uninstall Symantec protection for endpoint without password. This computer was given to me and I do not know the password. I have uninstall setup windows 10 please help

  Hello

  I am Chetan Savade of the Symantec Technical Support team.

  To erase MS completely without password, you must Cleanwipe tool.

  Cleanwipe tool is available for download at Flexnetoperations.com, or support can also provide.

  Symantec Endpoint Protection (SEP) adds support for Windows 10 with 12.1.6 MP1. For Symantec Endpoint Protection 12.1, a maintenance patch was published on July 29, 2015.

  You can upgrade to Windows 10 with versions of Symantec Endpoint Protection 12.1.6 MP1 and MP1a 12.1.6 installed or you must before uninstall Symantec Endpoint Protection. The upgrade of the operating system stops if it detects a previous version of Symantec Endpoint Protection.

  For more details, see the following article:

  http://www.Symantec.com/docs/INFO2746

  See the article linked thus: upgrade to Windows 10 invites you to uninstall Endpoint Protection after an upgrade to 12.1.6 MP1

  http://www.Symantec.com/docs/TECH231349

• BlackBerry smartphone Storm2 new operating system installed, now Lock password is inop?

  Hi all

  I installed the latest OS from last week, and now, when I lock the phone, the phone unlocks by pressing the release button, rather than asking the password.  I reset the phone 3 times and no luck.  Any ideas?  Thank you!

  For those who want a storm/Storm2 lockable try StormSlider application.  This handy application has a minimum memory footprint and can be configured to lock or not in definable circumstances by different user with or without password.  As this is an application that will continue to work regardless of what he does an upgrade of the OS solve the issue/fix lock requirement.  I got it on my Storm and Storm 2 and it works perfectly...

  You do not have accidents of Pocket because it requires "sliding" to unlock your screen.

• I want to log on without password to the oracle server

  I want to log on without password to the oracle server.

  by administrator user that I have installed the oracle database with that I can login without password, but by another user that I just can't!

  in windows server to oracle! a group with the name "oradba" exists in the windows group.

  any user who join the group to oradba can connect without a password

• [INS-06006] Connectivity SSH without password do not put in place between the following nodes.

  Hello

  I'm currently building the cluster by RAC 11 GR 2. I try to install Oracle Grid Infrastructure Oracle Linux 6.4 (x86_64bit) machine - node1.abc.com.

  I'm at the stage of the "Cluster Node Information" where I have to provide me with the list of nodes to be managed by the Oracle grid Infrastructure. Currently I have added just me - node1.abc.com with the name of the virtual IP address - node1 - vip.abc.com. The two host name and virtual IP addresses are registered on the DNS server - it is also installed on node 1. Before adding the second node2.abc.com, I was testing SSH connection but it fails. I clicked the [SSH_Connectivity...] button and in the OS Username (grid) and his password. When I press the [Setup] button, it pops up message successful "Able to establish connectivity SSH without password between selected nodes." But when I click on the [Test] button or the [next] button, I get error - ' connectivity [INS-06006] SSH without password, do not put in place between the following nodes: [node 1].» What is the problem and what exactly to do to avoid this error?

  
  

  Thank you
  

  It was because I assigned a real static IP address for the second NIC eth1. With this affected YES wouldn't let you go to the next screen. So I had to remove NIC out of my laptop. But if eth1 is not resolved by the DNS name it also gives you errors. So I guess a correct functioning is I would sign up eth0 and eth1 to the DNS server but eth1 does not have real IP. Then I could go to the next screen.

• Without password ssh does not work but the ACR is fine!

  Version: 11.2
  Operating system platform: AIX 6.1
  
  Background:
  For stand-alone installations DB, we use the oracle of the LDAP user as the owner of the Oracle software. This oracle user is not in/etc/passwd
  
  For the CAR, a local user of oracle is mandatory and we created and installed grid and DB several months ago. Everything worked. Today when I made a ssh of Node1 Node2, is asking for password oracle. IE Passwordless ssh does not work
  
  
  I have connected to the instance1 and ran

  select instance_name, host_name from gv$instance;

  This is the list of instance names and host names. How is the feature CAR is still intact without SSH without password?

  Hello

  So, what you are implying, is that, user equivalence is required for Installation, but not so required for the feature CARS. Right?

  RAC will work without problem and CARS not use SSH, but resource "ora.cvu" of Oracle Clusterware using SSH for healthcheck.
  When you run '. " "/ cluvfy" is mandatory you have ssh configured with equivalence of the user, the 'ora.cvu' resource is "cluvfy.

  So, if someone deletes the directory .ssh mistakenly Oracle $HOME, RAC feature pourrait still work?

  Yes... CARS doesn't always work. SSH and Oracle Clusterware, Oracle Clusterware also still works without problem, have a low dependency.

  As RAC FAQ mentioned is mandatory present an equivalent user (ssh, etc.) set up after the installation of the PAP/GRID.

  Kind regards
  Levi Pereira

  Published by: Levi Pereira December 14, 2011 12:42

• INS-06003: failure of connectivity SSH without password for installation with the following

  Dear all,
  
  I am in the process of installing Oracle 11 g on Redhat Linux 2 grid Infrastructure.
  I have installed ssh on both RAC nodes and when I run
  
  SSH - p7547 racnode1 "date; hostname ".
  SSH - p7547 racnode2 "date; hostname ".
  
  I get the date and the hostname without error on both nodes.
  
  But during the installation of the grid, I get this error message:
  
  INS-06003: failure of connectivity SSH without password for installation with the following nodes: [racnode1, racnode2]
  
  My thought is that it is because of the port has changed 22: 7547 but where them specify this port in the configuration of the CARS?
  
  I also get this information in the Setup log:
  
  WARNING: Could not establish a SSH connectivity with node racnode1. Reason: java.net.ConnectException: connection refused
  
  Kindly help on that.
  
  Kind regards
  Imran

  misterimran wrote:
  Dear all,

  I am in the process of installing Oracle 11 g on Redhat Linux 2 grid Infrastructure.
  I have installed ssh on both RAC nodes and when I run

  SSH - p7547 racnode1 "date; hostname ".
  SSH - p7547 racnode2 "date; hostname ".

  I get the date and the hostname without error on both nodes.

  But during the installation of the grid, I get this error message:

  INS-06003: failure of connectivity SSH without password for installation with the following nodes: [racnode1, racnode2]

  My thought is that it is because of the port has changed 22: 7547 but where them specify this port in the configuration of the CARS?

  I also get this information in the Setup log:

  WARNING: Could not establish a SSH connectivity with node racnode1. Reason: java.net.ConnectException: connection refused

  Kindly help on that.

  Kind regards
  Imran

  You can have the file/etc/ssh/ssh_config, where the default port is set at 22. Replace with 7547 and try ssh racnode1 "date; hostname". If it works, then it contains the definition, you may need to perform.

  Kind regards
  Julien

• How can I remove phone without password icloud account

  How can I remove an account from my iphone icloud 6 without password.

  You can not. If the Apple ID that the iPhone is locked is yours and you can provide original proof of purchase to Apple, they may be able to help.

  If you are not the original owner of the phone and that Apple ID it is not yours, the phone doesn't help you.

• How can I remove Icloud account without password?

  How can I remove Icloud account without password?

  Some things to note-

  -an impossible to delete an iCloud account if you can remove a device.

  -If your wish is to remove an iCloud account, simply remain dormant.

  -to answer your question, if the account the disconnection of a device, you will need the password to the account.

  -If you have forgotten the password, then go here https://iforgot.apple.com