solution to the error message on canon 052 printhead is poorly installed

Similar Questions

• I get the error message: maigration failed to transfer when I install Windows updates. How can I fix

  I get the error message: maigration failed to transfer when I install Windows updates. How can I fix

  Hello

  Thanks for asking!

  You cannot install updates Windows and error migration was not able to transfer.

  The problem can occur if the update of the components are damaged.

  Is the message of exact error that appears?

  I suggest you to reset the update components and check if the problem persists.

  See the site:

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Warning: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows XP

  http://support.Microsoft.com/kb/322756/

• Get the Error Message When you try to download and install Vista Service Pack 1

  Hello

  Update Windows guard neglect when you try to download and install Vista Service Pack 1 and I get the error message 80092004.  Please notify.

  Thank you
  Andy

  Hello

  Welcome to the windows vista forums.

  1. stop the Windows Update service (make sure that you are logged on as administrator)

  Click the Start button | Control Panel | System and Maintenance | Administration tools
  Double-click Services.
  (Provide the administrator password or a confirmation if prompted to do so.)
  Right-click the Windows Update service and click on stop.

  2. Click Start, type %windir%\System32 in the search box and press ENTER.

  Find and rename the folder C:\Windows\SoftwareDistribution.

  3. start the Windows Update service

  Start button | Control Panel | System and Maintenance | Administration tools
  Double-click Services.
  (Provide the administrator password or a confirmation if prompted to do so.)
  Right-click the Windows Update service and click Start.

  This procedure will erase your history on the Windows Update Site. Not important.

  Don't forget to restart and then try the update again. If there is no corruption in that
  folder, it would be gone now.

   

  Please, try now to windows update and check if you get the error.

  You can also download the stand-alone SP1 package. You can download the windows vista SP1 by clicking on the link below, please follow the instructions in method 3 in the KB article:

  http://support.Microsoft.com/kb/935791#Method3

  I hope this information is useful.

  Please let us know if you need further assistance.

  Concerning
  Rehman - Microsoft Support

• Address book disappeared and the error message said to reinstall Outlook Express after installing IE 8

  Original title: IE 8 has completely corrupted my Outlook Express.c

  I just downloaded IE 8 and it has completely corrupted my Outlook Express. My address book is missing and the error message says that I have to reinstall Outlook Express. How can I do this?

  Hi Geloffusa,

  1. What is the exact error message you are getting?

  You can try the following steps and check.

  Step 1: Rename the Windows address book file

  a. click on start-> Search-> all files or folders.

  b. in the "All or part of the file name", type: "*.wab" (without the quotes).

  c. define the area look in to include your local hard drives, and then click search.

  NOTE: If you find more than one .wab file, make the following changes for all files.

  d. click the file .wab you find. On the file menu, click Rename.

  e. Type "oldaddress.old" and press ENTER.

  f. open Outlook Express and check.

  Step 2: Edit the registry and save dll files

  a. click on start-> Run, in the Open box, type "regedit" (without the quotation marks) and then click OK.

  b. navigate to the following registry key and delete it:

  -HKEY_CURRENT_USER\Software\Microsoft\WAB

  -HKEY_LOCAL_MACHINE\Software\Microsoft\WAB

  c. Remove wab32.dll and wab32res.dll in C:\Program Files\Common Files\System

  d. Click Start-> Run, in the Open box, type "msimn /reg" and then click OK.

  e. Click Start-> run, type "regsvr32 «c:\Program files\Common Files\System \wab32.dll»»

  f. Click Start-> run, type "regsvr32"c:\Program files\outlook express\oeimport.dll.

  g. click on start-> run, type "regsvr32"c:\Program files\outlook express\wabimp.dll.

  Important: The above mentioned steps show you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up and restore the registry, follow the steps from the link below:

  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  Hope this information is useful.

• Try to install Adobe Acrobat Pro XI, get the error message that a newer version is already installed

  Portable Acrobat Pro on a new computer installation.  At the point of download get the message "Setup has detected that you already have a better version product installed. The installation program will end now. "Acrobat Pro is NOT already installed, in any version.  What is the problem?

  Thanks for the comments.  Drive and cleaning tool has not helped.  We found that the add-on PDF associated with FrameMaker was causing the issue.  Uninstalled FM and the add-on, and then was able to install Acrobat Pro without any problem.  Then reinstalled FM.  Weird, but it worked.

• Re: How secure cloud creative error message saying: Installation failed and the error message ex20?

  I just got this from Adobe support.  Close all windows and start with a new browser window.  Go to < www.prodesigntools.com >.  On the right side of the window, there will be a small box labeled «direct download links»  Click on 'New CC 2015' and when it starts to download cancel the download.  Then, right-click on the "Lightroom 6/CC" link and open in a new tab scroll down until you find "BOLD" topic "Adobe Lightroom 6/CC direct download links" and then click on the link for the version you want to download, Windows or Mac OS.  It's a slow download, maybe 2 hours or more depending on your speed of connection and internet download.  When the download is complete, you will need to extract the files and install the program.

  It is 22:00 Tuesday evening, and I am downloading right now in the Middle, waiting for results.  I would like to hear the techie I spoke with tonight some time tomorrow and I will let him know if it worked.

  Seems to me that this should be the method of downloading the program from the beginning, instead of all jump them through hoops and making many phone calls after he did get any help or advice on the site.  I've been playing with this for three days and finally have little hope to get the program on my computer.  Good luck, I hope this help anyone.

  I don't have a screenshot of the error message, cannot find version

  Lightroom, I installed now, and my question was not

  answer online.  I was given instructions by phone and made the

  operation after the end of the telephone conversation.  I also do not have

  enjoy the repetitive requests for confirmation of my post.  Kindly

  stop asking for more information, I have given you

  sufficient data and given an adequate explanation.  Thank you.

  The game, 09:46, 4 August 2016, Jeff A Wright [email protected]>

• I can not load a CD rom. I get the error message is that the CD rom is 16-bit and my Vista 64 Bit.__What are solutions to make this readable CD Rom in my system.

  I can not load a CD rom.  I get the error message is that the CD rom is 16 bits and my Vista 64-bit.
  What are the solutions to make this readable CD Rom in my system.

  It seems that if the CD is read correctly, but if I interpret your message right, you have problems to install the software.  And if the facts are that it is a product of 16 - bit and Vista is a 64-bit operating system, you won't be able to install it.  Support for older, 16-bit software was removed from Vista and Windows 7.  You would need to consider using a product such as Microsoft's Virtual PC or VirtualBox from Sun Microsystems virtualization to run - and if it were a game, same virtualization may not work.

  'Herb Ellicott City' has written in the new message: * e-mail address is removed from the privacy... *

  I can not load a CD rom.  I get the error message is that the CD rom is 16 bits and my Vista 64-bit.
  What are the solutions to make this readable CD Rom in my system.

• I get the error message: 1 the installation of VAC. I've done all of the proposed solutions. What can I do?

  I get the error message: 1 the installation of VAC. I've done all of the proposed solutions. What can I do?

  Hello

  Please see the link below.

  Error: "unable to install". Creative cloud office

  Hope this will help you.

  Kind regards

  Hervé Khare

• Installing Win7 Enterprise by PXE and tried by disk. Get the error message at the point "Setup starts services. What is the solution?

  The message reads: "the computer restarted unexpectedly or encountered an unexpected error."  Windows Setup cannot continue.  To install Windows, click OK and restart the computer, and then restart the installation. »

  Found and answer to change the registry via the command prompt, but cannot get to the command prompt and SHIFT + F10 for the error message screen is unresponsive.  Disk install also-error to the exact place.ed even to install via disk and got the same error at the same place.  Other options available?
  Thank you.

  If you have compatible hardware and your computer still stops responding, disable any unnecessary material. Remove (USB) universal serial bus devices. Remove or disable network cards, sound cards and cards of the series; and then restart the installation.

• How to solve the error message "Mozilla cannot find runtime" when I try to start Firefox?

  Mozilla put Firefox updated to version 36.0. When I click on the Firefox icon to open it I get the message: "Mozilla cannot find runtime" I get the message even if I try to open Firefox by selecting "firefox.exe" in the Program Files folder. Subsequently, I uninstall Mozilla Firefox and reinstall. It will open and operate normally just after the re-installation. So if I close the program and try to re - open again, I get the error message same "Mozilla don't find runtime".

  The only way I can get Firefox to open is if I uninstall and reinstall everytime I want to open it after the initial re-setup.

  Adriel thanks for your quick response. Your solution worked perfectly. I was greedy, trying to find a viable solution to the problem "runtime" I had never met before. -_-

• I'm so fed up with the error message that adobe flash broke down.

  I'm so fed up with the error message that adobe flash plugin has crashed. You got two years, in order to solve this problem, and all your proposed solutions do not work. I see no alternative but to return to Internet Explorer. It's so frustrating when I check my emails and click on a link to get the same message over and over again. Why did this problem occurs only with Firefox? It is not the case with Internet Explorer and it is not the case with Google Chrome. Otherwise, Mozilla Firefox is great.

  This from Halofromsue copied here:

  Well as I said in my last post, yesterday I disabled Shockwave in Plugins. However, as you know, you need shockwave and flash for most things... so I went back and set it to say "ASK to ACTIVATE" so when a web page loads and he needs, he will ask, and then I will either say 'Yes' or ' ' and that seems to work. So far, after three hours, it has collapsed and shockwave/flash all work fine when she needs.

  Me: it works!

• HP Envy 4500: Cannot print the error message

  I just replaced the black cartridge of the moment on my 4500 and the printer will not print. I get the error message is - cannot print. Visit www.hpinstantink. Com for info. I did that but it's impossible to find useful info! Help, please!

  Hi @clairerobinson6.

  Welcome to the Forums of HP's Support. I understand that your printer does not print and directs you to instant ink site. I would like to help.

  The printer is in the instant the ink program. He receives this error for two reasons. The printer has not been able to connect to the servers of HP ink level controls or the number of pages in a long time, or there is a bill pending. Normally when you sign in to your instant account of ink there is an opinion on the matter. If you do not see a notification, try to reach out to the instant the ink Department.

  You can send them a tweet directly from your instant ink account, or use this link to find the appropriate phone number.

  If you have any questions, or if this does not resolve the problem, let me know.
  If it solves your problem, please click acceptable Solution. This will allow other people with the same problem the solution easily. If you want to say thank you, feel free to click on the laurels.

• I deleted by mistake my certificates. Now, I get the error messages trying to connect to gMail, eBay and my bank accounts, etc.

  I recently did some "housekeeping" on my computer and for reasons known only to nini-gods, I delected all my security certificates. Now, when I try to log in to gmail, ebay, my bank accounts or any https:// site, I get a warning message "this connection is Untrusted." I click on the links provided to overcome the safety message, but whenever I return to the site I have to jump through all the hoops again. I see a small box that can be clicked to confirm security exception, but the little box that must be clicked to "make the permanent exception" is always grayed out. I know I'm on the right sites - have been using the links on the personal bar for years without problems. It started right after I deleted the certificates.

  I've tried everything. Firefox RELOADED (use 3.6.4) deleted and reloaded the bookmarks, follow the instructions when I get the error message. Nothing works. As soon as I close the browser, and then go back online, I'm back to error messages.

  Can anyone help?

  COR - el: thanks a lot for this solution. Everything works fine now.

  However, I had a problem with deleting the files. I dragged to the trash, and then tried to access the sites in question and received the same message. I restarted the computer and when I checked the files I was dragged to the trash were right where they were before. The only file that are been trashed was the .txt file.

  So I renamed them as you suggested and now everything works fine.

  Thank you again once - I tried to understand by using the troubleshooting Firefox site, but your explanation was simple and easy to follow.

  Val

• Satellite Pro M10 will not start again and comes up with the error message

  My laptop Toshiba Satellite Pro M10 will not start again and comes up with the error message "load error" when I press the power button.
  The arised problem after installation of the 'symantec system works' and try to restart windows XP Professional to make the installed executable program.

  What can I do to get the notbook again reboot?

  Hello

  Seems that there are problems with the files of GoBack.

  Try to boot in safe mode and remove the Norton System works from your laptop ;)
  If this does not help, you will need to recover the laptop with the recovery CD Toshiba delivered!

  Also I recommend to visit the Symantec support site and to check the solutions to the problem with the Norton System Works programs

  Good luck

• When I try to log the p2p soulseek site, I get the error message "connection failed: socket error.» change the connection settings. How can I fix it?

  "socket error".

  When I try to log the p2p soulseek site, I get the error message "connection failed: socket error.» change the connection settings. How can I fix it? Is - this type of error called a winsock error?  It keeps happening to me on this site. What I've read, it happens when you make changes to a program before concluding that under its weight. Could it happen because I'm deleting files, I don't think that will be completed while the other files are D/Ling? That's what I'm doing wrong? I found a solution to correct an error in Winsock that is to enter the "command prompt" and type "netsh winsock. Will this work? (I'm sorry I have so many questions in this post, but I have had TO KNOW!!)

  Hello

  I suggest you send the question here for best support about the issue.