Solve the ODE which uses a max() function

Similar Questions

• I replaced my hard drive and format my computer before turning off the software PS.  It need my code series now, but I had lost.  How can I solve the problem and use the software again?

  I replaced my hard drive and format my computer before turning off the software PS.  It need my code series now, but I had lost.

  How can I solve the problem and use the software again?

  If you use a perpetual Photoshop and formatted your disc version of starting without disabling your activation of Photoshop, you also Adobe supports help you activate Photoshop once you retrieve your serial number.  The startup disk formatting would destroy that credential of Activation Photoshop machine which is registered in the database of the Adobe activation server. Which reduces the activation numbers you have to use.  If you have Photoshop installed on a second computer that means that you have no free activation available as well, even with your key you can't activated the machine.

• Failure of the assertion when using Labview ActiveX functions to communicate with the dll

  Hello

  I'm looking for suggestions and tips about the following error that I get when I use .NET Labview functions to communicate with the dll written in .NET environment. I just need a starting pointer on where can I search for the origin of this error. I am a newbie in. NET.

  

  I am also attaching the .vi I use, if this is of any help. All suggestions are welcome!  Thank you.

  The origin of the error found after studying the examples provided by the OR .NET. The callback function had to be moved out of the loop, which solved the problem.

• Demonstrating the PL/SQL using SQL Developer functions

  Good afternoon

  I started writing some PL/SQL functions to replace some of the SQL I use most often.  Some very simple examples would be:

  create or replace function func_test (p_1 number) return number
  
  is
  
  x number;
  y number;
  
  begin
  
  
  x :=1;
  y :=2;
  
  
  return p_1 * x * y;
  
  
  end func_test;
  
  

  create or replace function func_test2 (p_1 varchar2) return varchar2
  
  
  is
  
  
  return_val varchar2(10);
  
  
  begin
  
  
  select p_1 into return_val from dual;
  
  
  return return_val;
  
  
  end func_test2;
  

  However, on my place of work that I have not been granted created function privileges again until I can show some examples, which is understandable.

  For the moment, without these privileges, is there a way I can build/test functions in principle locally using SQL Developer without the need to write functions in our database? I.e. can demonstrate meanings in SQL Developer, but devoid of envelope to create or syntax of replace?

  I hope that's not too vague.

  Using Oracle 11 g 2 (not connected to the database of the workplace at this time for a specific version not.)

  3.4 SQL Developer

  Thank you

  TP

  Hello

  The obvious solution is to get privileges.  If your employer wants to do you something, they give you the necessary privileges to do so.  It's silly for them to tell you to do something, but refuses to let you do.

  Otherwise, you can install Oracle on your own machine, as suggested above.  It's free and legitimate, if you only use it for learning and development.  Oracle Express Edition is very easy to install.

  As a last resort, you can write functions and procedures that are local to an anonymous block, like this:

  SET SERVEROUTPUT ON

  DECLARE
  Function func_test (p_1 number) return number
  is
  x number;
  number of y;
  Start
  x: = 1;
  y: = 2;
  return p_1 * x y;
  end func_test;
  BEGIN
  dbms_output.put_line (func_test (3))
  || '= func_test results.
  );
  END;
  /

  You can only call this kind of function of the anonymous block in which it is defined.

• Function of memory in the loop control and Simulation - problem of the ODE Solver

  Hello

  I'm correctly using the control loop & simulation to simulate the behavior of what is essentially a shock absorber-spring-mass system. In the process of change in time (dt) is used to integrate an arbitrary value. I use a rack depending on memory to store the time, to calculate the change of time (dt).

  The simulation is quite complex, because of the precision required, not all the ODE solvers can all support. Currently I use the Adams-Moulton method, this works very well for the simulation. However, it cannot detect the change in time, the change is constantly zero. This problem has auto market by using an another ODE Solver, but then the simulation has been messed up instead (even when I listen to the step sizes and tolerances). So I'm pretty confident that Adams-Moulton is one of solver ODE best suited to the problem at hand.

  Is there another way to store the previous hour and use it calculate lag, that the use of the memory function? Everyone knows about these problems before?

  I did a lot of research of error using the probe, but I'm sure that there is a problem with the ODE Solver and memory function. See the image below, showing basic how is calculated the change in time.

  I'm pretty new to LabVIEW, so if there is something else I missed I would be happy to hear it.

  PS! I set the tolerance minimum step of size/relative and absolute for the Adams-Moulton to simulate the behavior of the system properly.

  Problem solved!

  It turns out that the ODE Solver has struggled because of two "table 2D find" used functions. This was created for the interpolation/extrapolation, which caused a problem constantly and the ODE Solver could not resolve correctly, so the functions of memory doesn't work does not correctly or the other.

  By increasing the table manually, I could use closest method instead, with also good results as interpolation.

• Why my game Center freezes when I go by parameters or directly by clicking on the center of games? Can I know which method is the best to use to solve this problem? Also, I use an iPhone 6 s, iOS 9.3.1

  Why my game Center freezes when I go by parameters or directly by clicking on the center of games? Can I know which method is the best to use to solve this problem? Also, I use an iPhone 6 s, iOS 9.3.1

  Have you ever tried to force reboot the phone by holding down the button sleep and home for 10 seconds, until the call logo comes back again?

  You won't lose data, but it can cure a few glitches.

  If this does not work, the initial Setup would be the next step:

  Use iTunes to restore your device to factory settings - Support Apple iOS

• Hi, I need to download the acrobat PDF after registration and cc payment, I get the new which is not available for mac ist... How can I solve this problem... I use only the mac...

  Hi, I need to download the acrobat PDF after registration and cc payment, I get the new which is not available for mac ist... How can I solve this problem... I use only the mac...

  If you had bought subscription Acrobat Standard / stand-alone product , you need to cancel the subscription / order and re - register / re - order subscription Acrobat Pro DC / stand-alone product.

• I installed Adobe elements 12 update to 6 items.  I need to use the save for Web function, but it is grayed.  I tried re-installing 12 items three times in case there was something missing, but this has not solved the problem and save the enemy

  I installed Adobe elements 12 update to 6 items.  I need to use the save for Web function, but it is grayed.  I tried to reinstall 12 items three times where it was missing something, but this has not solved the problem and enemy Save Web feature is always gray on. How can I get this feature too much work. I contacted the home and they have happened to you. I have 20 minutes to make a customers web work and if I don't work (about £500). Please advise/help.

  You are on the Expert tab in the editor?

• Oracle: how to use the max() function in expression box

  How to use the max() function in the case where expression, please explain with an example

  Hope this helps and should be explicit

  with t as
  (select 1 col,100 col2 from dual union
  select 2 ,100 from dual union
  select 2 ,200 from dual union
  select 3,100  from dual union
  select 3,200  from dual  )
  select col, case when max(col2)=100 then 'with 100 range'
  when  max(col2)=200 then 'with 200 range' end  from t group by col
  

• When starting my laptop, a warning poster says c:\program can affect the function of other applications, appointing him to c:\prgram1 will solve the problem

  Hello

  When starting my laptop (Windows vista), pop - up warning message indicating c:\program can affect the function of other applications, by naming to c:\prgram1 will solve the problem options: would you like it to remane, or ignore it.

  Can you help me

  Thank you

  Original title: Cprogram

  Hello

  Method 1:

   I recommend you put the computer to boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 2:

  You can also scan your computer the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

   

  Hope this information is useful.

• Impossible to move the mouse cursor using the trackpad on laptop Sony and some of its functions does not work.

  Former title: Sony trackpad not working no-Windows 8

  Hi guys,.

  I have a sony vaio s series that I bought last January. It comes preinstalled with windows 8, and I use it only about 2 - 3 times a week. 2 weeks ago my trackpad stopped working because I can't move my cursor. I can zoom in and zoom out, and other things, but there is a problem with some functions of the trackpad. I checked the synaptic driver and it says that it is up-to-date.
  now, I suspected that it might be a hardware problem, so I sent it to sony Service Center because it is still under warranty. Unfortunately, it is not the case and I was informed that it's a software problem. They advise me reinstall windows 8 because it is the only solution to the problem, they believe. (I want to clarify that it is probably not Fn + F1, as when I start the laptop, the trackpad works perfectly fine for about 30 secods and suddenly Soundtracks autour after that).
  I hesitate to do because it is a daunting task and I'm not really intuitive with such things. I wonder if you have any suggestions or if anyone has experienced the same problem.
  My hunch is that a windows update is responsible for this, but I'm not entirely sure. Indeed, 3 weeks after I bought my laptop, that this has already happened to my once but after the reboot, the trackpad has worked well. now even by restarting the computer does not help. Basically, I have to use a mouse which is not convenient when I'm on the road...
  Thank you very much! appreciate any help I can get, really. I'm about to want to sell my new laptop T_T

  I finally solved the problem. I reinstalled the driver in safe MODE. Hope it could be useful to someone else

• Last update, iOS 9.2, eliminated the function "search" in the email, I used massively.  Tried to restore to a previous backup, 15/2, and 'research' does not return, always shows iOS 9.2 in my settings.  How do I return search function?

  The last update, iOS for iPad mini 4, 12.7 9.2 GB of capacity, has eliminated the search function in the email, I used very strongly.  Tried to restore to a previous backup, 15/2, and 'research' don't come back and always shows iOS 9.2 in my settings.  Yesterday, a new useful feature appeared, an entry 'return to mail' at the top left of the screen (Safari, at least), which now also seems to be missing. Siri, I don't want to bother with earlier, continues to display everytime I try to go back to the home page of apps/programs, is driving me crazy.  Except for limited iPad usage (mail, Safari for the links from emails, play music, some reading books mainly) mainly am only moderately competent Windows PC user, so am frustrated at best. Any ideas on how to restore or add this feature to return search (and get Siri shut up!)?

  You can disable Siri in settings/general if you want to completely disable the function.  I suppose that you use the Home button to return to the home screen.  If you press the button too long, Siri is enabled.  Too long is not very long, so you must quickly press and release the Home button.

  Good day.

• Why using the driver NOR-DAQmx ANSI C functions in a thread causes a deadlock?

  Firstly, apologies if this is bad advice, but it seemed the closest fit.

  I use MSVC 2008 Express with the library in ANSI C NI DAQmx for some analog output with a box USB-6009. I create a thread to handle the signal generation is based on fixed time. My main thread running the user interface. I found that I get intermittent blockages in release, so that libraries mode NOR are responsible (in the second thread) and I use MSVCRT features (on the main thread). My test code is attached as "deadlock2.cpp".

  I used WinDbg to try to find the cause of the deadlock. Traces of the battery of my two sons are attached as t1_stack.txt and t2_stack.txt.

  It seems that the MSVCRT localtime() function uses a lock when it is called for the first time and then went to lock the Windows DLL loader lock. At the same time libraries NOR (or less libraries mxs) are responsible for locking the charger DLL is being held. The mxsutils library uses getcwd() which seems to try to block something the MSVCRT and therefore my two sons are now deadlocked.

  I can probably work around this by calling the localtime() and the NOR-DAQmx functions before I spawn my second thread so that the DLLs are already loaded in the process. However, I have no guarantee of this to continue working if something changes in the future, and if there are any locks going on finally having the DllMain() calls for a thread hanging may still cause a deadlock. If my results are correct, is it likely that NEITHER would fix the dll for not trying to make something complex in their DllMain()?

  According to NI Measurement and Automation Explorer, I'm under DAQmx libraries v9.3.5f2. I download the latest version now to try, but it will take time.

  Hi dmcminn,

  Thank you for the comprehensive and detailed bug report. I was able to reproduce the problem with NOR-DAQmx 9.6 using the code you posted. I reported it to the R & D team suitable as CAR #366538.

  I agree with your analysis of the problem. Getcwd() so the first call to __tzset() acquired _ENV_LOCK, which Microsoft has documented as the "lock for environment variables. __tzset() also called GetTimeZoneInformation(), which can load additional libraries, that you have demonstrated.

  Here are a couple more possible solutions, but they are not great:

  • Link to the static version of the CRT (/ MT instead of /MD). This would bind a separate copy of the lock of the CRT table in your program, and DAQmx would continue to use the lock to MSVCR90.dll table. They use more of the same _ENV_LOCK.
  • Build using a different version of Microsoft Visual C++ (for example 2005 or 2010). MSVCR80.dll MSVCR90.dll and MSVCR100.dll own separate copies of the lock of the CRT table.

  Whatever it is, it does not eliminate the fact that mxsutils called the CRT while now the loader lock, and this function CRT acquires another lock.

  Furthermore, the forum Multifunction DAQ is a better place to ask questions DAQmx.

  Brad

• Ghost of the sent emails from my email using my account, I guess that what needs to be done to stop or solve the problem?

  Ghost of emails sent from my email address. sent from my address book full. What does take to stop or solve the problem?

  Two things may apply here.  The first is that, in fact, someone stole your credentials because you signed in to your mailbox using a public hotspot.  If you can still access your mailbox with a web browser, on a private network (such as your home network) and change your password to something complex and unguessable, using at least 10 characters, the characters being a combination of uppercase and lowercase letters, numbers, punctuation or special characters.  Who must thwart those who have stolen credentials, denying them access to your mailbox.

  The second thing that can apply is that your box to the letters is safe, but your address was hacked, which means that spammers are using their own mailing envelopes but by specifying your e-mail as well as the mailing address, something that is very easy to do something that happens to almost everyone who allows their address be visible in a public forum (such as Facebook or an online discussion group).  This case if it is a serious problem and not a threat to you.  Since spammers change mailing addresses frequently, they will move to use yours.

  You can usually tell the difference between these cases because in the first case, you would probably lose access to your mailbox because the spammer changed your credentials based on himself.  It's a problem that you need to address with your e-mail service provider.   You can also see evidence of the compromise because targeted friends can send you copies of the messages they received, and you will be able to confirm from the message turned headers to your e-mail service provider's network.  The latter manifests mainly because you will begin to get NDRs to addresses that you don't recognize or are clearly fake.  In this case, just remove and stop worrying.  They will stop after a while.  Even still, it is always advisable to change the passwords to your services online all the months to protect against the compromise.  Tools like lastpass.com are beneficial to help keep you straight.

  Brian Tillman [MVP-Outlook]
  --------------------------------
  https://MVP.support.Microsoft.com/profile/Brian.Tillman
  If a response may help, please vote it as useful. If a response to the problem, please mark it as an answer.

• When I download Apps, I get a download error 'undefined '.  I followed the instructions to delete the OOBE, which did not solve the problem.

  When I download Apps, I get a download error 'undefined '.  I followed the instructions to delete the OOBE, which did not solve the problem.

  Using creative cloud | Download error in the applications tab of Creative Cloud Desktop Application

  If you have found and deleted files oobe and who could not solve the problem, check your hosts file.

  help for that and other adobe.com sure common connection problems read, http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html