Some layers go invisible regardless of what the show/hide settings

Similar Questions

• I found the show/hide button toolbars, but you should know how to REMOVE toolbars that appear on this list?

  I found the show/hide button toolbars, but you should know how to REMOVE toolbars that appear on this list?

  Is attached a screenshot of my screen with the context menu to show/hide tabs. I want to delete some of them and let others. Please help me to know how. Thank you!

  Hmm, maybe this "one-time" imported into the new preference? Try this:

  (1) in a new tab, type or paste Subject: config in the address bar and press ENTER. Click on the button promising to be careful.

  (2) in the search above the list box, type or paste the cust and make a pause so that the list is filtered

  (3) double-click the preference of browser.uiCustomization.state and the content must be highlighted in a small dialog box.

  (4) copy the whole line and paste it into Notepad and save it as a backup.

  (5) in Firefox, click on the button '3-bar' menu > developer > Notepad. Remove the comment that appears and paste data preferably, that must appear on a long line. Click on the "Pretty Print" button to make it more readable.

  So I hope that you can spot the extra toolbars and change them out, taking care to preserve the commas between the elements.

  I don't have the extra toolbars in mine, but I copied and pasted back this spaced format and Firefox was able to handle it well. I went into customize and moved a button, and when I left, Firefox has rewritten the preference set as a single line. Assuming that yours works fine, then you can get rid of the backup from step (4).

• Show/hide the image with audio (audio does not if necessary)

  Then, I ran some tests to see what was going on so I could better explain my problem.

  I have a slide with a picture that has four clickable areas. First of all, the student listen tell me for a few seconds and then is invited to click on the image areas that are highlighted.

  When the user clicks on one of the fields, an image appears and I taped audio on this 'object '. Note: I didn't use the slidelets substitution as the clickable area is hidden by the new image when the image appears on a click. The user will press a close button that is on the image, set with another clickable button to hide the image then select another pop up box. (See image below... you can see the image of forklift under the transparent image gray... This is where the user clicks the highlighted area).

  

  I tried two ways:

  having the image plays on the whole timeline from beginning to end of blade (be hidden with the show/hide button function)... when I do it, the sound will not play at all (I'm guessing that this is because the audio went silently on the first few seconds of being on the screen, so by the time the student clicked the button finished audio).

  and

  Drag the beginning of the image to close the timeline when the user is asked to click on areas of the screen... when I do that, the sound play a bit, but gets cut off after a few seconds.

  If I click on the areas as soon as the blade begins to play (since i KNOW where the buttons will be activated), the audio plays very well which makes me believe my theory that the audio runs just at the moment where the user gets to click on it.

  There is no break on one of the buttons around this period, so I know this isn't that.

  What I am doing wrong?

  Thank you! :-)

  I'm happy to say after hours of frustration, I finally got to work.

  I went and read your blog Lieve on micro navigation and managed to keep the images at the point of the slide where the user is asked to click on them and define the action of tip:

  to display the image,

  hide the other images and

  Use the assign with 705 rdcmdgotoframe

  and added a line to continue so it wouldn't break (if I do this, it seemed only allows only not the last his image clicked / or show the function works because I have an action secondard on the second tab to display the button 'next' once all are clicked).

  I had to do the math, but thanks to your info on your blog, I was able to understand this. I just tested it and it works... so I'm not going to save and close and breathe until Monday when I can run my final tests on the entire project!

  Thank you!!

  ~ Gina

• Problems with the layout themed to show/hide the region 25

  Hi all, Ive hit another question that I hope someone can help with...

  APEX 4.2.4 on XE... Theme 25.

  I've reproduced this login as apex.oracle.com [email protected] password newpass 291 3 application page.    (admin/admin is also implemented as a UN/pw)

  I have a skin region see the this Im using as a region of select query. There are a number of boxes, and a couple of display only fields that have values returned in it.

  I I set out them in a row, and after 3 items, I start a new line with the other 3 articles... that is

  X X X

  X X X

  Except that with the region set to show/hide and the model of the value without tab, no sidebar I get.

  X X

  X

  X X

  X

  If I change the standard region it works OK, and if I change models, it seems ok.  Ive tried all the combinations of columns, etc, but nothing helps...  Im trying to figure out if Im missing something, or I've hit a bug any... (almost certainly the old...) ...

  Thank you very much indeed

  Richard Legge wrote:

  I have a skin region see the this Im using as a region of select query. There are a number of boxes, and a couple of display only fields that have values returned in it.

  I I set out them in a row, and after 3 items, I start a new line with the other 3 articles... that is

  X X X

  X X X

  Except that with the region set to show/hide and the model of the value without tab, no sidebar I get.

  X X

  X

  X X

  X

  If I change the standard region it works OK, and if I change models, it seems ok.  Ive tried all the combinations of columns, etc, but nothing helps...  Im trying to figure out if Im missing something, or I've hit a bug any... (almost certainly the old...) ...

  The difference between the models of the region is that the Standard region has defined Points of view and the show/hide does not work. This is the mysterious properties that Oracle has not yet bothered to document. Their omission of this model is indeed likely to be a bug.

  Create a copy of the region show/hide template and add a point of view for the body of the region (content):

  Name: Body of the region

  Substitution of template: BODY

  Grid Support: Checked

  The maximum fixed grid columns: - 1

  
  

  Use the new model to show/hide for the region of select query.
  

• Dynamic action - show/hide area based on LOV that returns the ID

  Hi people,
  
  This should be simple, so someone who works with dynamic actions.
  
  I have a LOV based on query below:
  

  select OBJECT_ID, KOD 
    from x_data x;
  
  retuns:
     ID          KOD
  ----------------------------
      492961 BMW
      492964 VOLVO
      492960 MERCEDES
      492963 VOLKSWAGEN
      492959 SKODA

  Agenda: P200_KOD is based on LOV that displays KOD and returns the ID.
  
  On my page, I have also 1 region called TEST_REGION.
  
  I want to put in place a testament of shich dynamic action SHOW/HIDE a TEST_REGION based on the value selected in the order of the day: P200_KOD (LOV). Region should be shown if displayed (KOD) selected ID value begins with '% V '.
  By other words, if following query returns any folder, then the SHOW, HIDE it on the other:

     select *
      from x_data x
    where x.kod like 'V%'
       and x.object_id = :P200_KOD;

  How can I define a condition of dynamic action fires, for article: P200_KOD?
  
  Thank you
  Tomas

  Hello

  One way:

  Create an advanced dynamic action.
  Name: Region to hide
  Event: change
  Selection type: item (s)
  Items (s): P200_KOD
  Condition: Expression of JavaScript
  Value:

  $(this.triggeringElement).children("option:selected").html().substring(0,1) !== "V"
  

  Action: hide
  Fire on the Page loading: true
  Hide all items on the page on the same line: No.
  Action of false: show
  Fire on the Page loading: true
  Display all items in the page on the same line: No.
  Selection type: region
  Region: TEST_REGION

  Kind regards
  Jari

  http://dbswh.webhop.NET/dbswh/f?p=blog:Home:0

• What is displayed in the layers palette is different from what is on the canvas - Illustrator CS6

  I'm not a super user in Illustrator, but I know my way around it and understand more than the basics.  I downloaded this Shutterstock vector but what I see on the layers palette is different from what is on the Web and if I try to save or export to another thing, the result is looking like the palette layers - almost black.

  And it only happens on some of the objects, as you can see on the image, the Apple and other leaves are very well.  It also does pumpkin and some of the grapes in the fall.  Any idea what's going on?  I checked all my layers to see if something looked weird, but they all look good...

  When I opened the original Shutterstock .eps file in Photoshop, I get the same black objects.

  

  View > preview overprinting (enable this)

  Does look dark now, then:

  Windows > attributes

  Select the item that is acting strange

  Uncheck the overprint fill

• So, what are these two arrows that appear on some files, such as page files in the Finder?

  So, what are these two arrows that appear on some files, such as page files in the Finder?  I kinda afraid to hit one of them for fear that they're going to mess with the file.

  Could you post a screen so that we know what you're talking about!

• Windows Media player on my machine does not run some AVI files. How can I check what the problem with AVI files. Files are running in other utilities of free ware

  Windows Media player on my machine does not run some AVI files. How can I check what the problem with AVI files. Files are running in other utilities free ware. Also, windows Explorer does not display dimension and other video related information for the file. Y at - it a tool that can indicate what exactly is the problem with the file.

  Ritu

  Hello

  1. you get any error message?

  2. don't you make changes to the computer before the show?

  Please follow the steps from the link below.

  http://support.Microsoft.com/kb/279242

• Body is fixed regardless of what I do and just Funes dragging. Origin of the head does not work as well.

  Hey!

  In collaboration with Adobe host character Preview 3, made all the tutorials, they are great!

  Head of my character works fine, but the body (arms and torso) are fixed to the bg. I never fired them, they are just firmly stuck.  I've tried everything. removal of all the possible Islands, restart, re import, removal of all layers but a piece of the head and then adding a stick as the body figure... no matter what, the body remains fixed. If I put a player on hand is not distort the body but a piece of the arm... I am at a loss. Any help would be appreciated!

  Another strange aspect is that the head or the neck has no place of origin. I tried to put one in a bunch of times but it does nothing, but head still seem to work perfectly.

  This program so much love. Can't wait to see what he does next!

  -Lechuck11111

  

  In addition to the tip of DaveW, also add a '+' in front of the Mervin top-level group.

• How to make the double line things go away when I read web pages, that what happens in front of him just some words that are double line under the word and then you will see an announcement when the cursor passes through the word.

  He double blue line under a word like POWER or Medicare, etc.

  It is contextual advertising. You should be able to eliminate one of the following. I suggest you have a file hosts and Adblock Plus with EasyList filter subscription.

  Extension "Adblock more."

  You also need the filters as "Easylist" subscription so after installation of

  with the right button on the icon of the status bar and choose 'Préférences'

  then on the filters menu-> Add-> EasyList subscription

  https://addons.mozilla.org/firefox/addon/adblock-plus/ (608,3 KB)

  Blocking unwanted Parasites with a Hosts file

  Blocking is at the level of the system

  http://www.MVPs.org/winhelp2002/hosts.htm

  View/use the HOSTS offered above as a plain text file

  http://www.mvps.org/winhelp2002/hosts.txt (596KO)

  If you add one of your own you will have to keep in mind

    and manually include the online hosts.txt file below your own.
  

  Hosts file is more oriented to protect your system against the really bad
  or things spread by its host name. Do not confuse with no antivirus protection more.

  Please mark "resolved" a response that will better help others with a similar problem - hope it was her.

  BLOCKED TOO - with Adblock Plus - no problem:

  With the ease of blocking items in Adblock Plus occasionally, you can be too aggressive and suddenly disappear all over the page. Adblock Plus provides functionality to help you know more precisely what you block with on a page.

  As seen in the Preferences ("Ctrl + Shift + F"), ABP maintains separate groups
  -The filters that you created yourself (rules of Exception, blocking rules, element hiding rules)
  -Separate groups for each subscription filter

  The report of blockable items ("Ctrl + Shift + V"), it's where you go to see what is blockable, what is blocked and if blocked what the rule is on the line with the mouse hovering. It would also enable the source, so you can see if it was your rule. The right mouse button opens a context menu with options. I show the columns are {address, filter, type, State} selected to the right of the headings. I have sort by State so block appear in red at the top.

  You can use the report to make the changes you need.
  We'll see changes you make in the preferences.

• When I just click on what to get a drop down box is invisible until I run the cursor over the items in the box!

  Well, when I just click on something to get a drop-down list in the box is invisible until I run the cursor over the items in the box!  Also, I double click on it to make it open!  any suggestions?  Also, I may be wrong on the subject of Windows.  Good to use is not good at fixing my computer.

  Thank you Debbie

  go directly to Microsoft update, you have all updates to sp3 and day.

  An analysis of the express and install all high-priority, then do a custom scan and install the RootKit updates.

• My mind is wiped out. I'll put up pages in Photoshop 9.0 to be then placed in InDesign 4.0 for professional printing. Can you help me configure the proper color settings, and what PDF preset to use. And output parameters, etc. Thanx.

  My mind is wiped out. I'll implement the color pages in Photoshop 9.0 to be then placed in InDesign 4.0 for commercial printing in book form. Can you help me with the settings of color in Photoshop, that is to incorporate the color profile; convert in space work, Adobe RGB, etc. and which PDF preset to use, i.e. printing, PDF / X - 1 or 3, etc. Also, what I have to select the output settings such as the conversion of colors with the Destination or the printer deals with that. I know I asked a lot, so thanks in advance for any input or advice.

  Best regards, ScottyB34

  What are the settings of your printer wants? Some may deal with sRGB some want Adobe RGB Ctrl/Cmd-Shift-k in Photoshop, then choose North Amercian prepress 2

  He'll take care of the tags for you, or if sRGB is important, Norh American General Purpose 2.

  Here is a summary of the settings PDF and their meaning:

  When you are ready to create a PDF file from an application such as Illustrator or InDesign Adobe, we give you a list of the predefined PDF settings from which to choose. Well how do you decide which is the right choice? Well, let me explain what they do.

  Let's start with the smallest file size and the name of the type of the story. It is compatible with Acrobat 6, which means that anyone who has Reader or Acrobat 6 or above will be able to open the file. Now it converts everything in sRGB color which is a common space for color monitor.

  All RGB is truncated to sRGB, CMYK and spot colors also. So that means if you have a job to print, you can see some color shifts in this outgoing PDF. You must decide whether it is acceptable. He can't stand live transparency, not flattened. It downsize image content to 100 pixels per inch and this is part of how she made a reduced file size. It also uses aggressive JPEG compression of poor quality on the content of the image. So, you can see some of these rectangular JPEG artifacts.

  But it is how it gives you a reduced file size, and results are appropriate to be posted online or attached to an email.

  High quality printing has compatibility with Acrobat 5 and above. There is no color conversion. RGB RGB stays, rest spot, stays of CMYK CMYK spot and it supports live, not flattened transparency. It does not perform some downsampling to 300 pixels per inch. So, for example, if you placed an image which was 300 ppi and then set to scale up to 50 percent there actually a res then 600 pixels per inch.

  Well, this process would take half out these pixels. Therefore, it can create larger files but that makes it suitable for in the House of printing or sending Let's say a remote office if they want to print we tell cells leaves, or brochures, or something like. It's beautiful out on an internal printer.

  Print quality and high quality printing have similar names, so this may be a bit confusing, but print quality has compatibility with Acrobat 5 or higher. It converts the content of RGB to CMYK destination values according to what you specify as the destination.

  It is usually SWOP, S-W-O-p. It supports live, not flattened transparency. It performs the subsampling bicubic to 300 pixels per inch and because that it keeps at least 300 pixels per inch, which means that it can create some large files, but it is suitable for professional printing.

  Then we start to get into the presets named 'X '. 'X' is now for Exchange. They agree on specifications and the idea is to have a set of specifications if a PDF file is compliant to these specifications, we know it's going to be printable.

  We know that imaging devices are going to treat them properly. So this goes back to 2001, and which can seem a bit old, but bear with me. PDF/X-1 has a compatibility with Acrobat 4. I know, it sounds old. It converts RGB to CMYK content, it keeps the content of good tones. It flattens transparency. Downsize it at 300 pixels per inch. It can large enough crat files if you have large size images in your project and that it is suitable for professional printing.

  The idea behind X-1 is if you send a PDF file to an unknown printer, you do not know what are their capabilities, you send abroad, it will be able to be photographed on any device. No matter the age, it is, they can print. Over the years, the concepts of Exchange became more sophisticated the workflow and devices become more sophisticated.

  SP PDF / X-3: 2002, remains compatible with Acrobat 4 and that means that it flattens transparency, but it does not perform any color conversion.

  This means that it maintains RGB content, place remains in place, rest of CMYK CMYK. He still performed bicubic downsampling at 300 pixels per inch, and therefore, it can create large files. But this is suitable for commercial printing, if the printer signals you that it is present RGB content is correct.

  PDF / X-4: 2008 is compatible with Acrobat 7 and later. See, we're getting more modern. No color conversion. RGB RGB stays, stays CMYK CMYK, spot rest spot and it supports live, not flattened transparency.

  He still performs bicubic downsampling. Therefore, it can create large files because it maintains the pieces of the image to 300 pixels per inch or higher and it is suitable for commercial printing, as long as the printer tells you that RGB content is not serious and dynamic transparency is acceptable. Some older workflow does not support dynamic transparency, or they treat well, and that's why always ask. It is a special case in Illustrator, something called default Illustrator. Its compatibility is Acrobat 6 or higher.

  It does not perform the color conversion, everything continues like this. It supports transparency live, not flattened, and it also contains the original, editable Illustrator file in the PDF file. It preserves layers and it may be return, can be reopened safely in Illustrator and it's really the only PDF format you can do with safely. But it can create larger files, because you sort of two files for the price of one, they sometimes get huge.

  So what predefined PDF is Right For You? Well, if you want to send for printing, the first thing you should do is to ask your printer how they want the created PDF.

  They should be able to give you the plug for the creation of the PDF file. They may be able to give you job options files you can simply import and use as your preset target. But if it's a stranger the printer or the printer for some reason any said, well, I don't know, just make a PDF and this happens, well, choose the lowest common denominator to the PDF/X-1 test. Anyone can image that. If it is a more modern printer and up to date, especially if you send it to someone who uses digital presses, PDF/X-4 should be safe.

  I always go back to point one, ask the printer. If you send it as an attachment or you're going to post online, well, smaller size of file is a pretty clear choice. But remember this, you can start with one of these predefined parameters, and you can always edit it to customize your specific needs. So get to know the presets, understand the destiny of the PDF you create, and then make the best PDF that you can.

• Firefox spell check feature began to point out almost all of the words, regardless of if the words are correctly spelled.

  Firefox spell check feature began to point out almost all of the words, regardless of whether the words are spelled correctly.

  Tried to download and reinstall Firefox 3.6.8 but the same thing happens.

  Tried different web pages to see if it was a feature of a particular Web site, but it happened while I typed this entry in a field on a Mozilla Web site page.

  Such a shame, apart from the extensions topic spelling is one of my favorite features of Firefox!

  Can you tell what dictionaries were causing this issue?

  Only the selected dictionary has an effect.

  You can see which dictionary is selected if you right click in a text box and open the submenu language.
  
  Also make sure that [[X] "Check spelling" in the right click menu context has a tick.]
  
  Alternatively, you can try to move on the items 'Check spelling' and the new.

  See http://kb.mozillazine.org/Spell_checking and How to use the spellchecker of Firefox?

• Satellite L755D-S5104 - does not know what the problem

  Hello
  I keep a L755D-S5104.
  AMD A6 3420 M with Radeon 6520G
  4 GB of Ram
  500 GB hard drive.

  The problem with my laptop recently is that I am getting i/o device error (WriteToDisk) errors thus the laptop hangs / crashes with a screen of jibberish/sand-of looking.

  So far, I got error screen with my PC as well before and I'm pretty sure it's because of the unstable driver for video/chipset. I solved as before with the installation of older drivers (but for my laptop, I can't find a choice of versions)

  I don't know if my hard drive is the cause which as well (due to the error WriteToDisk) since mainly these two errors occur at the same time. Maybe my drive is in good health, but the video/chipset driver is causing the problem?

  My laptop temperatures are normal and there is no noisy fan noise etc.

  HDTune bad block scan displays the status of my drive HARD 100% OK but the chkdsk /r utility accidents near about 45000/67000 (screen white/jibberish causes), also, I have attached my laptop HARD drive to my computer and run the chkdsk utility it without error.

  I don't know what to do? Given that I've hardly know his choice of drivers for S5104. The error started to appear since the last two days and before that my laptop was perfectly fine.

  Post edited by: zeineb

  On this virtual path, it is not easy to say what the problem is. What you can try is to do some tests and, as I see you do this very well.
  Try to get the new HARD drive and install original recovery image on it and to experiment with the settings and clean the preinstalled OS. If you do this thanks for posting comments.

  By the way: all the drivers, you should be able to find on http://support.toshiba.com/drivers
  Just put Satellite L755D-S5104 from here and you will get the list of all available drivers.

• What the handles, threads, and processes means or function, they are performing?

  My son will ask me a question and I could not answer (it is perhaps a good thing because I think he will try to enter and change something he doesn't know) so I thought that I felt I'd better try to find out. He and I are eager to know what the handles, son and process average or functions, they do. They are in the performance tab in Windows Task Manager.

  
  
  Thank you

  Hello

  A process handle is an integer value that identifies a Windows process. The Win32 API call a HANDFUL.

  When you start a program, this program runs as a "process". It's something that runs in its own protected area, with its own memory. Other processes cannot touch this memory.

  A few times, the program needs to do several things at once in a way of multitasking, similar to how the multitasking process. For example, a spreadsheet can recalculate the cells you enter data. He * could * start another process, but they can't (easily) share the memory, he would need to if recalculate cells!

  Must be a different sort of process that is not quite as separated. It is a "thread".

  Process: the number of applications that are running at some point in the computer.

  Hope this information helps.