Show/hide the image with audio (audio does not if necessary)

Then, I ran some tests to see what was going on so I could better explain my problem.

I have a slide with a picture that has four clickable areas. First of all, the student listen tell me for a few seconds and then is invited to click on the image areas that are highlighted.

When the user clicks on one of the fields, an image appears and I taped audio on this 'object '. Note: I didn't use the slidelets substitution as the clickable area is hidden by the new image when the image appears on a click. The user will press a close button that is on the image, set with another clickable button to hide the image then select another pop up box. (See image below... you can see the image of forklift under the transparent image gray... This is where the user clicks the highlighted area).


I tried two ways:

having the image plays on the whole timeline from beginning to end of blade (be hidden with the show/hide button function)... when I do it, the sound will not play at all (I'm guessing that this is because the audio went silently on the first few seconds of being on the screen, so by the time the student clicked the button finished audio).


Drag the beginning of the image to close the timeline when the user is asked to click on areas of the screen... when I do that, the sound play a bit, but gets cut off after a few seconds.

If I click on the areas as soon as the blade begins to play (since i KNOW where the buttons will be activated), the audio plays very well which makes me believe my theory that the audio runs just at the moment where the user gets to click on it.

There is no break on one of the buttons around this period, so I know this isn't that.

What I am doing wrong?

Thank you! :-)

I'm happy to say after hours of frustration, I finally got to work.

I went and read your blog Lieve on micro navigation and managed to keep the images at the point of the slide where the user is asked to click on them and define the action of tip:

to display the image,

hide the other images and

Use the assign with 705 rdcmdgotoframe

and added a line to continue so it wouldn't break (if I do this, it seemed only allows only not the last his image clicked / or show the function works because I have an action secondard on the second tab to display the button 'next' once all are clicked).

I had to do the math, but thanks to your info on your blog, I was able to understand this. I just tested it and it works... so I'm not going to save and close and breathe until Monday when I can run my final tests on the entire project!

Thank you!!

~ Gina

Tags: Adobe Captivate

Similar Questions

  • Error: The Service of Audio does not work

    I get a notice that reads, "The Service Audio does not work", but I still get audio. That is what it is?

    Remember - this is a public forum so never post private information such as numbers of mail or telephone!

    Ideas: I receive a notice that reads, "The Service Audio does not work", but I still get audio. That is what it is?

    • You have problems with programs
    • Error messages
    • Recent changes to your computer
    • What you have already tried to solve the problem

    Hi Wdjpgh,

    1. did you of recent changes on the computer?
    Method 1:

    First of all, make sure that the Windows audio service is running on the computer.

    a. open administrative tools by clicking the Start button, click on the Control Panel, clicking system and Maintenance, and then clicking Administrative Tools.
    b. double-click on Services. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
    c. right click on Windows Audio serviceand then click Properties.
    d. under the general tab, next to startup type, make sure that Automatic is selected.
    e. also make sure that the service is started

    Method 2:

    If there is still no sound after you enable the Windows audio service, then check out the link below and run the troubleshooter and check if it works.

    Tips for solving common audio problems

    Method 3:

    If the previous step fails, then you will need install the latest audio drivers on the computer by visiting the sound card manufacturer's Web site and check if it works.

    Updated a hardware driver that is not working properly ' t-work correctly

    Note: visit the manufacturer's Web site to download the latest audio drivers

    Thank you, and in what concerns:
    I. Suuresh Kumar - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • show/hide the object with the text box

    Hello world

    has obtained a display code and masking of an object with a button and it does not work well. This is the code

    function show_hide_image1(evt:MouseEvent):void {}

    Image1.visible =! Image1.visible;


    Enterbtn.addEventListener (MouseEvent.CLICK, show_hide_image1);

    Now, got another code with a box of password who send me on different Label based on what is in it. There is the code.

    Enter.addEventListener (MouseEvent.CLICK, fl_ClickToGoToAndStopAtFrame_4);

    function fl_ClickToGoToAndStopAtFrame_4(event:MouseEvent):void


    If (Passwordbox.text == "cryocath") {}

    gotoAndStop ("cryocath");

    } Else if (Passwordbox.text == "54321") {}

    gotoAndStop ("A54321");

    } Else if (Passwordbox.text == "123456789") {}

    gotoAndStop ("A123456789");

    } else {}

    Stop ('error')



    Now, my question is, I want to introduce my hide/show code this code but do not understand how to do it. What I want is that if I enter my Passwordbox, my "image1" show/hide object "image1". If I get "image2", my "image2" show/hide object. Can someone help me with this? TNX


    Enter.addEventListener (MouseEvent.CLICK, fl_ClickToGoToAndStopAtFrame_4);

    function fl_ClickToGoToAndStopAtFrame_4(event:MouseEvent):void


    {if (this [PasswordBox.Text])}

    This [PasswordBox.Text] .visible =! this [PasswordBox.Text] .visible;


    If (Passwordbox.text == "cryocath") {}

    gotoAndStop ("cryocath");

    } Else if (Passwordbox.text == "54321") {}

    gotoAndStop ("A54321");

    } Else if (Passwordbox.text == "123456789") {}

    gotoAndStop ("A123456789");

    } else {}

    Stop ('error')



  • How to debug the image won't load does not intermittently exclusively on Firefox?

    The image (GIF67) is to be generated and sent through binary stream from the server (using the secure connection), Explorer and Chrome still display the image, Firefox intermittently fails to load without separate ground of success-failure.

    I checked that it is a matter of Firefox, by analyzing the tcp packets and confirmed that the response from the server still the same bytes either on the success that the scenario of the failure of level.

    How could configure Firefox to log the process of rendering the requested image?

    Action taken:

    -Tested with versions of Firefox from 10 to 28, fails
    -Tested with Chrome and IE, image still renders correctly
    -Follow-up: & As = AAQ & As = AAQ
    -Updated the Chrome and IE require headers to imitate demand of Firefox, image renders correctly
    -Updated the headers to mimic Firefox asks chrome, fails
    -Packet tcp analyzed, answer is the same for failure and success restore
    -Reconstruct the image correctly retrieving the tcp packets of the application for a successful rendering, as well as for a bad record.

    Sometimes, it is possible to make 50 applications and see the image correctly, some other times you could do 50 applications and not see the image displayed, but above all it is possible to load the image 20 times and have 1 fail.

    Thanks in advance!

    The mime type was wrong: "Image/png".

    I currently have shame because it was the second thing to check on my list and in some way I missed it.

    I faked a stressed server by creating a Web Service to send the image via streaming and the thread to sleep after the rinse a small amount of data, I was able to reproduce the problem (Chrome and explore renders fine image and fails in Firefox) and I could also see fixed it by setting the right mimetype (don't you?).

    This surely isn't a bug, but I find it interesting that Chrome and Explorer are both able to accept that the data and show the Gif so that Firefox gives up on the stream if it takes a few milliseconds after receiving a package and mimic the gif type is not correctly set.

    I thank very you much for the people who have helped me through.

    PD: Anyone knows the real reason for Firefox to get this behavior differently than Chrome/Explorer at the level of the stream/encoder?

  • Save the image under... does not?

    After the update of FF 24.0, two things I noticed.

    (1) I see a context menu super long (even is the retina of resolutined to the address above)
    (2) save the picture slot - does not work


    help-> restart with disabled modules.

  • How to hide the sidebar with other files of Notes?

    OS X El Capitan (10.11.3)

    I am trying to read a PDF Acrobat Pro and take notes with Notes in my mac, side by side.

    I would like to know how to hide the sidebar on the left of Notes, where are the names of the other file.

    I don't want the files, I already went to 'View' and you click "hide files".

    I can just see the writing of the Notes area while sharing the screen with the document I read in Acrobat Pro.

    Looks like a basic feature which Apple or Adobe Acrobat Pro should have, but I can't seem to find it.

    Looked for other solutions to the App Store, but what I've found is a bit expensive.

    I appreciate any assistance.

    I asked that your thread moved to the El Capitan forum.

  • I'm having a problem with the email of comdast especially for the outgoing with SMPT. Does not recognize the user name or password. Erased and the exact same re-admitted and do a little work and now 2 - 3 times a week same recurrs either on iphone, ipad a

    In the last 6 months + / _ my Comcast email not send mail as the smpt said that the name and the password not recognized. I can delete them both and then re-enter on my iphone and ipad, imac and it works again. It happens now 2 or 3 times each week. my website does not do this and can receive and send email without problem. Their support, explains what's happening with many of their apple using the client.

    All the answers in the group. Has not happened before. This could be with apple's IOS dates as google is not not the case.


    You should probably get a different email.

    I know this isn't much of an answer or even very applicable but everyone I know eventually loses their emails from mobile provider or cable operator sends cause unless you stick with them forever, your account is deleted after you leave them.

    Gmail, yahoo, rocket mail, and even AOL don't do that.

  • View-PCoIP does not connect on the desktop with ViewPlanner, but does not connect manually

    I saw this mentioned in a few subjects, but I've not seen a resolution.

    I configured a remote view-PCoIP see Planner run profile. The customer and and food Office of VMs on. The Office is a newspaper and connect the client starts the view Client PCoIP. It connects on the view connection server, but not on the desktop. The error message is 'office 'Unknown' is not in the list of desktop titled. (see the folder of the image as an attachment).

    I press the OK button on the error message, start the Client view manually, by using the same credentials see Planner in AD, and I am able to connect to connect to the server, then the virtual desktop computer. The job see Planner runs even at this place (if I don't stop to see Planner first).

    Two days ago, that I was able to run a desktop computer without problem running 10 profile. Since then, I've added several hundred offices at the pool, no other configuration change I can think. The pool is an automatic with floating assignments, office computers are supplied with View Composer. The 'Test' AD security group has the right (see image file).

    I don't understand why see Planner cannot connect to a desktop computer, so that I can do it manually.

    I see the same behavior with a single or multiple, virtual machine run profile.

    Here is an extract from the journal of the unit (all IP addresses are on an area of temporary laboratory, so I really don't like if they are exposed).

    Thanks and greetings

    Wednesday, March 26, 2014 23:17:29 DEBUG add users ['Test_1'] for security AD Group: Test
    Wednesday, March 26, 2014 23:17:29 DEBUG all users added to AD security group: Test
    Wednesday, March 26, 2014 23:17:31 DEBUG returning to the current state: 0 with status message: [IP recorded: desktop: 0, Clients: 0] [the workload began on machines 0] [Uploaded results-> desktop: 0 (0 errors), Clients: 0]
    Wednesday, March 26, 2014 23:18:19 registration of new customer INFORMATION:
    Wednesday, March 26, 2014 23:18:19 INFO current registered status machines: [pairs required: 1] [clients: 1] [server: 0]
    Wednesday, March 26, 2014 23:18:20 new INFORMATION server registration:
    Wednesday, March 26, 2014 23:18:20 INFO current registered status machines: [pairs required: 1] [clients: 1] [server: 1]
    Wednesday, March 26, 2014 23:18:20 INFO get the IP address Office VM-1 of VC
    Wednesday, March 26, 2014 23:18:21 DEBUG returning to the current state: 0 with status message: [IP recorded: desktop computers: 1, customers: 1] [the workload began on machines 0] [Uploaded results-> desktop: 0 (0 errors), Clients: 0]
    Wednesday, March 26, 2014 23:18:30 INFO get the IP address VM VC client1
    Wednesday, March 26, 2014 23:18:30 INFO got the client1 virtual machine IP address:
    Wednesday, March 26, 2014 23:18:30 INFO get the IP address Office VM-1 of VC
    Wednesday, March 26, 2014 23:18:30 INFO obtained IP address for the virtual office-1 computer:
    Wednesday, March 26, 2014 23:18:30 DEBUG IP:> name: client1
    Wednesday, March 26, 2014 23:18:30 DEBUG IP:> name: office-1 computer
    Wednesday, March 26, 2014 23:18:30 INFO query: SELECT * from hostinfo where IPADDR = ""
    Wednesday, March 26, 2014 23:18:30 INFO Running query: UPDATE SET is_Client = '0' hostinfo, State = 'Unpaired', name = 'computer office-1 "where IPADDR = ''".
    Wednesday, March 26, 2014 23:18:30 INFO query: SELECT * from hostinfo where IPADDR = ""
    Wednesday, March 26, 2014 23:18:30 INFO Running query: UPDATE SET is_Client = '1' hostinfo, State is 'Unpaired', name = 'client1' where IPADDR = ""
    Wednesday, March 26, 2014 23:18:30 INFO registration remaining VMs
    Wednesday, March 26, 2014 23:18:30 reached the threshold of the INFO for the number of machines... The plan of starting reference...
    Wednesday, March 26, 2014 23:18:30 INFO waiting for virtual machines to settle and sleep during the time scale
    Wednesday, March 26, 2014 23:18:40 DEBUG of waiting for prefixes map to be extracted from Server view...
    Wednesday, March 26, 2014 23:18:41 INFO function call right with arguments: (pools: [], domain name:, groupnames: ['Test'])
    Wednesday, March 26, 2014 23:18:41 groups of security of the object DEBUG AD ['Test'] to the office pool
    Wednesday, March 26, 2014 23:19:10 INFO assigning client-server for 1 pair
    Wednesday, March 26, 2014 23:19:10 INFO Running query: UPDATE hostinfo SET state = 'Matched' where IPADDR = ""
    Wednesday, March 26, 2014 23:19:10 INFO Running query: UPDATE hostinfo SET state = 'Matched' where IPADDR = ""
    Wednesday, March 26, 2014 23:19:10 INFO query: INSERT INTO testinfo (test_name, ClientIP_FK, ServerIP_FK, Protocol, username, password, test_state, start_time, type) values ('PCoIP-1VM', '', '', 'View-PCoIP', 'Test_1', "passw0rd", "waiting", '2014-03-26 23:19:10 ', 2)
    Wednesday, March 26, 2014 23:19:10 request information: SELECT * from testinfo where testname = 'PCoIP-1VM' and test_state = 'pending' and ClientIP_FK = '' and ServerIP_FK = ' '
    Wednesday, March 26, 2014 23:19:10 INFO -.
    Wednesday, March 26, 2014 23:19:10 INFO launch the execution plan for the run profile
    Wednesday, March 26, 2014 23:19:10 INFO -.
    Wednesday, March 26, 2014 23:19:10 DEBUG begins to gather statistics periodically VC...
    Wednesday, March 26, 2014 23:19:11 INFO from the workload for all assigned pairs...
    Wednesday, March 26, 2014 23:19:11 INFO remote command running on machine: Logoff
    Wednesday, March 26, 2014 23:19:11 command run on the remote computer INFO: Logoff
    Wednesday, March 26, 2014 23:19:11 INFO wait until all desktop computers have disconnected
    Wednesday, March 26, 2014 23:19:21 INFO continues the race after waiting
    Wednesday, March 26, 2014 23:19:21 INFO looking for name of the cluster for computer office-1
    Wednesday, March 26, 2014 23:19:21 INFO Running query: UPDATE hostinfo SET state = 'Busy' where IPADDR = ""
    Wednesday, March 26, 2014 23:19:21 INFO Running query: UPDATE hostinfo SET state = 'Busy' where IPADDR = ""
    Wednesday, March 26, 2014 23:19:21 request information: UPDATE SET = '1VM-PCoIP' test_name testinfo, Protocol is 'View-PCoIP', name of user = 'Test_1', password = 'Q1w2e3r4!', test_state = 'Running', start_time = "2014-03-26 23:19:11" where test_id = 2837
    Wednesday, March 26, 2014 23:19:21 INFO running commands remotely with args: customer:, server:, Protocol: view-PCoIP, test_name: PCoIP-1VM, vmuser: Test_1, vmpasswd: Q1w2e3r4!, workprofile: {'IEbpm': 1 L, 'ARbpm': 1 L, "Thinktime": 2 L, "name": "StandardBenchmarkProfile_1i", "hosttime": 1, "random": 1, "iterations": 1 L, 'OMP': 60 L, 'video': 2 L, 'applist': ' WORD, ACROBAT, IE_APACHEDOC, EXCEL_SORT, 7ZIP} {, PPT, FIREFOX, OUTLOOK, IE_WEBALBUM, VIDEO '}, poolname: unknown, domain name: TMIOCONTROL
    Wednesday, March 26, 2014 23:19:21 INFO by adding the callback function for the remote root object to ipaddr:
    Wednesday, March 26, 2014 23:19:21 INFO added reminder for the command startWorkload on the client
    Wednesday, March 26, 2014 23:21:02 INFO connection started from the client:

    I think the name conventions 'computer of office-{n}' and Office-{n}"may be causing the problem. Can you try just to office-{n} and go to View server, open a command prompt and then run "python c:\listener.pyc" and after the release?

  • Pages of the OPS (with custom controller) does not not in the R 12.2.4 upgrade custom

    Hi all

    There is a problem, I'm dealing with my custom page. I am trying to expand the controller with my custom class, but get the error below

    oracle.apps.fnd.framework.OAException: could not create Java class: (oracle.apps.xxar.cusstd.createcus.webui.xxArCreCusCO) associated with the area: (ArUtilRN). It is probably because the class name is incorrect or not included in the project.

    at oracle.apps.fnd.framework.webui.OAPageErrorHandler.prepareException(

    at oracle.apps.fnd.framework.webui.OAPageErrorHandler.processErrors(

    at oracle.apps.fnd.framework.webui.OAPageBean.processRequest(

    at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(

    at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(

    at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(

    If the file is present in the right folder

    [webui applmgr@gfs3devapp1] $ pwd

    / opt/oracle/gfs2d/FS1/EBSapps/COMN/java/classes/Oracle/Apps/xxar/cusstd/createcus/WebUI

    [webui applmgr@gfs3devapp1] $ ls - ltr

    Total 4

    -rw - r-. 1 applmgr oinstall 1177 Feb 25 10:17 xxArCreCusCO.class

    I have to follow this discussion, but is not help me:

    Please help.

    Thanks, Jerome

    Hello samia,.

    In R12.2.4, you will need to create the jar with custom classes. Please visit the Doc ID 1577661.1

    Hope this helps you solve your problem.

  • Float does not work? I need the text to the right of the image, but my CSS does not work. Pls help


    I have some unusual difficulty get my images to float left/right in order to have text next to the image.  In the image I provided, the red arrow is where I'd like to be but little text whatever I put in the CSS file, the text starts at the lower right part of the left side of the image floated.  Can someone help me understand what is happening?  The code for the HTML code is located here the code for the CSS is here:


    I use the CSS code for a Web site I designed and that works very well in this Web site.  Why isn't it working here?  The name of the image is "fundraiser.jpg".

    Thanks for your help!

    Problem is caused by you not declaring the correct instructions for .float-left css class selector:

    Change this:


    margin: 10px 5px 0 0;


    To do this:


    float: left;

    margin: 10px 5px 0 0;


  • Select the list with a shipment does not save to the database

    OK, I have a form with several fields (text, radiobox, selection list, display text). I have one of these lists of selection fill a display in the text field. When I chose a selection of the selection list, she filled the screen in the text field with the correct information but erased all the other information that was the inscription in the other fields. I searched the forum and found that the selection list should be a selection with mailing list and the branch page on itself, which works, but now these 2 fields information is not saved in the database. All other fields are saved, but not both. Anyone know what im missing? Thank you


    Hi Deanna,
    First the display as a text cannot insert data into the database. It can only display data from database. I guess you do not want the user to enter these areas, and that's why you use display as text field.

    There is a good way to resolve this situation. Say, you have 3 select list P1_ITEM1, P1_ITEM2, P1_ITEM3 in your page. For the change of P1_ITEM1 the screen Select the list and the LOV type in your query, assuming you want the value to be retrieved from a table. Therefore, type-

    Select emp_id, ename from emp;

    type the default value and null -1 and display null YESvalue. Make sure that under the type of source, you have the selected with the correct name database column.
    for P1_ITEM2 to the section LOV retype your query - i.e.

    Select mng_id, executive pay where emp_id = NV('P1_ITEM1') or NV ('P1_ITEM1') = 1

    Basically, this statement updating the data in the list select second after the first selection. type the default value and null -1 and display null YESvalue. Make sure that under the type of source, you have the selected with the correct name database column.

    Do the same for the third. It should work fine.

    I hope this helps.

    Kind regards

    Pascal M

  • show/hide the button with the icon enabled when the condition is met


    I created a B button with an icon of a sign of the green check mark.
    It must appear next to another A button when a condition is met.

    How can I better get this working B key, without using something else than the APEX.

    The condition is that some data has been inserted by clicking A button or simply exist in the database table.

    I tried conditional display of point with conditiontype "PL/SQL Expression.
    but could not make it work.

    TNX to tide me over.



    If you use the condition EXISTS (SQL query returns at least one row)?

    This could give idea how

    BR, Jari

    Published by: jarola 18 November 2009 16:07

    I paste the wrong link and can not find more good.
    Well anyway in this link is also example to condition EXISTS

    To meet this requirement I can add a condition (SQL Exists) to the Report 2 region on Page 2:

    It takes something similar and your table selection

  • Update the clips with Alpha channel does not work after August 2016

    It's really random, I have a bunch of Silhouettes of Motion Designer of Digital Juice in my current project, and after the last update, none of them appear in the monitor of the composition. The clips are still there. Nothing is changed. But none of the Silhouettes. They are Quicktime video files with alpha and have the silhouette of a person to perform various tasks.

    They are not involved in After Effects and first.

    I have also a few clips with alpha explosion on my calendar. Those who still work, but they are not as vivid and intense as they were before the update.

    Help? All advice would be much appreciated.

    all the information I have shows that there is a bug in 13.8.1 on some OS systems. What is yours? It mainly occurs on Windows 10 and a few BONES. the solution is to uninstall quicktime or working with the version 2015.2. Have a look here:

    Re: New update broke PNG .mov format

    Color of EI error/bug on PNG + (codec)

    Problems with fire and muzzle Flash Active

    Re: AE interpereting not color values

    Layers of color to Alpha. MOV shifted on reopening program

    Re: Images of channel Alpha displays incorrect colors. Need help ASAP! I have samples

    a shared sorrow is a reduced sentence by half

    Why what happened? My guess would be that it comes to this

    Source: update is now available from effects CC 2015.3 (13.8.1) Bug - Fix | Creative blog Cloud by Adobe

    Please file a bug report and also a link to this thread: feature request/Bug Report Form

  • Save the Image under and browse does not

    In fact, this started before the update to FF29.0.1 but has worsened since. When I right click on any image on any page I get the menu and the option "Save Image under" but when I click it I get a brief hourglass and then nothing happens. It used to be that if I restarted Firefox it work for a little while but now it won't work at all. Even with the navigation for a file. For example, I am currently looking for work so I need to include my CV much. When I click Browse on the web page to point to my RESUME, that nothing is happening and it is on all web pages. IE however works. What is annoying I HATE IE.

    What you should know. I'm still on Windows XP (could it be the cause?). I tried running safe mode, but also reset Firefox and the two issues has not changed.

    I have a work around for the picture number record via an add-on that I found, but the question ahead is still ongoing and VERY annoying. Help!

    Figured it out. Malware. I had a different question and I ran Malware bytes and now all my Firefox problems are solved. Should have thought of that in the first place.

  • Replaced the HDD with SSD and does not start?

    I replaced the original HARD drive in my Latitude E5500 with a new 240 GB SSD. I can't the computer to boot. Blue lights above the blink of keyboard on and out and nothing else happens. Is there a sequence of keys that need to be pushed? I have the boot CD in the DVD player, but can't even get it to work.

    Is there a place to find written instructions?

    Thank you.

    Hi ran61a,

    Click here to find out what you say the flashing lights.

Maybe you are looking for

  • The off button does not automatically stop the deskjet printer - 6500g.

    When I press the off button, a "shutting down" message is displayed and the button flashes.  This left for 24 hours and the machine does not stop automatically.  It makes a ticking sound like an old wind up clock.  And, with every print request, I ge

  • ActionItem Q10 does not title?

    It seems that the Q10 does not display the title on the action item more. Is there a way around it? This is an example of how I create. {ActionItem}Title: qsTr ("Test")imageSource: "asset:///images/test.png."ActionBar.placement: ActionBarPlacement.On

  • Sleep in the power option does not properly

    At this pc 64-bit of windows 7 during approximately 3 years, all power options worked well. I set it up to show the screensaver after 10 minutes and then turn off the monitors after 20 minutes and then sleep after 30 minutes. Always worked. Eve of th

  • Discs Blu - Ray are not more recognized in Windows 7

    Hello I have 2 laptops with internal blu - ray, who never stopped recognizing Blu - Ray discs. I live in the United Kingdom A Blu - Ray drive is an Optiarc, the other a LG - PC with the Optiarc has Win 7 64 bit Ultimate and the brand-new PC with the


    Hello I have a 2921 on Ethernet circuits.  Problem is a jig to 60ms voice and no packets ignored from the source to the destination.  How to reduce jitter?  Is him police correct using Cisco recommended Nb = CAR x (1/8) x 1.5? The EP is honoring the