Some markers could not be legalized
Hello
After completing my project in Premier Pro, I go in again and import and.wav as active .m2v files, then I click with the right button in the project area and select 'New chronology', and then I drag the .m2V and .wav files to the timeline. At this time I get the message saying some markers could not be legalized in DVD chapters. Then, I found most of my chapter markers have moved, usually backwards in time to maybe 30 seconds. Then, because the .m2v files don't read well in again, I spend much too much time put back chapter markers where they should be. In fact, I usually spend setting chapter markers may be twice longer than the creation of the project. Sometimes well read in yet, but for the most part .m2v files do not play back at all, depending on where I'm on the timeline. Adobe support would not help me because they say that they do not even more support. As CS6 was the last version yet and this is the version we use, how can they stop supporting it? Anyway, my question is, what workflow will load my project in Encore without changing the position of the chapter markers? I use the latest versions of both programs.
When you create markers in PP, put them all on a full-time or half-second mark, never in between.
So, you would put a marker at 01:00 instead of 01:00:05. Or put you at 04:30:12 instead of 04:30:18.
To 30 frames per second, you will place the markers to 0 or 15 images. For 60 fps, 0 or 30 images. Always full or half a second mark.
Tags: Premiere
Similar Questions
-
Please help me solve this problem. I have automatic updates set to say "updates are ready for your computer. Click here to see these updates'; Here is the little yellow icon in the system tray low to the right of my screen. What happens when I click on this icon is usually I then click 'express install' (and non-personalized) and then press "install".
My computer sometimes slows down a bit that it downloads / installs these updates and which can be quite a pain in the thigh because it effects everything that I'm working at the moment, and of course because you have to restart the computer. I have external hard drives 4 or 5 so I to sequentially turn them off one at a time by ejecting them, turn off the computer and then start it back up and restart the hard drives.
In any case - I can never remember to "SOME UPDATES COULD NOT BE INSTALLED the SCREEN" so I'm at a loss to know what to do. My computer is perpetually slow because the small yellow Update icon sits in the systray continually trying to draw attention to me and when I do the same thing continues to be time and again - failure! I tried closing down my antivirus and windows firewall, but nothing helped.
your help would be much appreciated, either tell me how these updates to get the update of my systray icon, or to get updates of pit.
According to belarc Advisor - I am running:
Windows XP Media Center Edition Service Pack 2 (build 2600)
3.00 gigahertz Intel Pentium 4
cache of 16 kilobytes main memory
secondary memory 2048 k-cached9 of Avira antivirus
SUPERAntiSpyware (although it is installation not not at the auto of the msconfig, so its off to the update)Thank you!!
Hello
Try this 1st to see if it helps, and it should:
Description of the Patch registration cleanup tool
http://support.Microsoft.com/kb/976220/------------------------------------------------------
If necessary :
Try this - Panel - Windows Updates - on every update that will not be installed - click on the important updates
or the update itself - double click a view more information (or click top then discovers on the right)Those who will take you to a page where you can download the update.
Or go here and the KBxxxxxx number to download it.
Download Center - mount the KBxxxxxx.
Microsoft Download Center
http://www.Microsoft.com/downloads/en/default.aspxDownload - SAVE - go to where you put them - click on - RUN AS ADMIN
Then you can right click on the update in the updates Windows and HIDE.
If you get an error Installer install this version:
Windows install 4.5 Redistributable
http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en----------------------------------------------------
Then run this:
How to reset the Windows Update components? -a Mr Fixit
http://support.Microsoft.com/kb/971058Description of the system for Windows Vista, Windows Server 2008, update tool and
for Windows 7
http://support.Microsoft.com/kb/947821------------------------------------------------------------
Because these are all Office updates you might get more information if necessary in the Agency of those groups that
may have experienced the same problem.Office newsgroups
http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspxMicrosoft.public.office.misc discussions
http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.misc&cat=en_us_01cb749f-c998-4762-8099-df71793c11c7&lang=en&CR=us------------------------------------------------------------
If necessary you can incident free get reports however the above should take care of it for you.
Windows updates - free Incident report
Go here and click on-> Windows Update fails while searching, downloading or installation of updates
http://support.Microsoft.com/GP/wusupport#tab3The security updates, you can get free support Incident report
http://www.Microsoft.com/protect/resources/support.aspxI hope this helps.
Rob - bicycle - Mark Twain said it is good.
-
cannot install update KB2481109, error "some updates could not be installed.
Original title: update Windows XP Pro KB2481109.
My computer is constantly requiring an 'important' update and it is still KB2481109, but it's always with: "some updates could not be installed. I just spent my ware protection to MS Security Essentials, then have it set it to scan any and all the weeks do a full Scan rather than simply a
A quick. I downloaded MS Fix - It and whenever I ask him to check the Windows updates, it is said that Windows Update needs to be repaired, goes through the process and says it's fixed, but still it will not load.The diagnostic report detailed shows like questions: by default Windows Update of data locations have changed but then shows repaired; also shows: one or more Windows Update are configured incorrectly then that repaired watch.
Is there someone who can help out me? This is probably an easy question for someone, but I have no idea and looked at different sites for help and nothing seems to work.
Hello
1. what fixit did you run?
2. you remember to make changes to the computer before this problem?
Follow the steps mentioned below and check.
Method 1: See the article and run the Fixit to reset Windows Update components.
How to reset the Windows Update components?
http://support.Microsoft.com/kb/971058
Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:How to back up and restore the registry in Windows
http://support.Microsoft.com/kb/322756Method 2: You can temporarily disable your antivirus and then try to download the update.
Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.Method 3: You can also read the following article and check.
You cannot install some programs or updates
http://support.Microsoft.com/kb/822798Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
How to back up and restore the registry in Windows
http://support.Microsoft.com/kb/322756Method 4: You manually download the security update.
Update security for Windows XP (KB2481109)
http://www.Microsoft.com/download/en/details.aspx?ID=11625Reference: How to solve the common Windows Update, Microsoft Update and Windows Server Update Services installation issues
http://support.Microsoft.com/kb/906602 -
Playmemories export feature - "some files could not be exported" HDRPJ760V
Hi all
I've been racking my brain for the last nights on this issue.
I recently bought a HDR-PJ760V (built in projector)
The situation is, I put together a video for the birthday of my wife with his family and friends saying things different, all separate videos etc and I want to play the video sound using the tool built into the projector.
I would like to add some text and effects to video and then it reupload to the camera by using the function 'export' in memories of game House.
I used different software conversion and even Sony's Vegas software to try it.
When I go to 'export' in memories of reading, then select the video that was edited and drag and drop it in the box to the right, as a first step, the software accepts this file must be uploaded to the camera
I press the export button and it starts to download, the progress bar gets all through and then it tells me that "some of the videos could not be exported.
Someone at - he sucesffully edited a video and then he exported to the front camera?
In playmemories, I am able to combine several videos and don't download it to the camera, no problem, but the videos edited with external programs wil do not work, memories of game will play very well edited video.
Any help will be appreciated.
Jason
Thanks for your reply, not that I'm eager to good...
Must be a way to put the files on the camera.
There is a demo on the camera file when you get new, obviously, this was not recorded on my own camera and then shipped to me. It must be a way to put the video that has been edited on here, how you can add a file to the database?
I just spend $1500 on this device, with a projector and all, but what's the point if you can see only the raw images.
Advertising of the camera shows people gather around a pool with popcorn looking through the projector.
Anyone has any ideas on this at all? as I said there must be a way, because the demo file was transferred to the camera and added to the "base".
I tried to download files and he accepts, but as soon as he says its over adaptation more, give me an error saying that some files could not be copied
I'm happy to pay for the software for it
-
I have CS5, I can't get the updates on this topic. When I try, I get an error saying that some updates could not be installed. I have uninstalled and reinstalled, tried several updates and called and chatted with adobe support. they sent me to you all. Can someone please help me update my CS5?
update by downloading the files directly and then apply them:
-
When any new Master CS5 Collection, "some updates could not be installed.
My Win7 Pro x 64 system crashed the other day. After the reconstruction of the system and the resettlement of Master Collection CS5, Photoshop ran and said he had a few updates available (for all applications, apparently not only Photoshop). After trying to download, I got the error message "some updates could not be installed" and it listed most of the apps (like Photoshop). The explanation for each of them was, 'there was a download error. Quit and try again later. "Well, I have, several times, without success. Any suggestions on how to get these? Thank you.
Hi Am_I_Lame,
Greetings.
- Use this direct link to update PS CS 5
Concerning
Rohit
- Use this direct link to update PS CS 5
-
I have synced my creative files could (trial versions) on my Apple MacBook Pro laptop. I constantly get an error message that says, "some files could not be synchronized." I'm at 2 GB of capacity. What now?
Links for synchronization of files that can help
-https://forums.adobe.com/community/creative_cloud/host_sync
-http://helpx.adobe.com/creative-cloud/kb/arent-my-files-syncing.html
-http://helpx.adobe.com/creative-cloud/kb/cannot-share-certain-types-files.html
-Size limits https://forums.adobe.com/thread/1488242
-
I first deleted temporary files & cookies with ccleaner and then did a check disk error checking both box, which worked well.
I use IE8, finally I have 1 drive analysed, defragmentation took 20 minutes to make, and then box pops up saying some files could
cannot defragment please check report as below, also disabled screen saver made no difference. defragmentation is made after
restart the pc.
Volume (c)
Volume size = 74.50 GB
Cluster size = 4 KB
Used space = 37.29 GB
Space free = 37,21 GB
Percentage of free space: 49 percentFragmentation of the volume
Total fragmentation = 0%
Fragmentation of files = 0 percent
Fragmentation of free space = 0%Fragmentation of files
Total files = 101 866
Average size of the files = 667 KB
Total fragmented files = 330
Total excess fragments = 1 020
Way of fragments per file = 1.01Pagefile fragmentation
The pagefile size = 1.49 GB
Total fragments = 1File fragmentation
Total records = 11 543
Fragmented folders = 4
Fragments of folder in excess = 73The Table of master files (MFT) fragmentation
MFT size = 141 MB
Number of records MFT = 114 702
Percentage used MFT = 79%
Total of fragments in the MFT = 3--------------------------------------------------------------------------------
The more fragmented file size file fragments
70 5 MB \Documents and Settings\All Users\Application Data\AVG2012\Chjw\fa2c3a072c39bf85\avgcchmf.dat
53 3 MB \Documents and Settings\All Users\Application Data\AVG2012\Chjw\fa2c3a072c39bf85\avgcchff.dat
41 2 MB \Documents and Settings\All Users\Application Data\AVG2012\IDS\malwareprofile\backup.dat
33 2 MB \Documents and Settings\All Users\Application Data\AVG2012\IDS\malwareprofile\nodes.dat
24 1 MB \Documents and administrator Settings\Temporary Internet Files\Content.IE5\WTRRLKDA\1685732_U5o4dKgh2pAX5cEJrQVD_1361933085[1].flv
20 120KO \Documents and administrator Settings\Temporary Internet Files\Content.IE5\WTRRLKDA
20 124KO \Documents and administrator Settings\Temporary Internet Files\Content.IE5\3M55K0TH
19 116KO \Documents and administrator Settings\Temporary Internet Files\Content.IE5\F2CG46SP
18 112KO \Documents and administrator Settings\Temporary Internet Files\Content.IE5\X0R7BEUV
13 584 Ko \Documents and administrator Settings\Temporary Internet Files\Content.IE5\X0R7BEUV\answers-fe-us[1].js
11 494KO \Documents and administrator Settings\Temporary Internet Files\Content.IE5\F2CG46SP\KonaFlashBase[1].js
11 494KO \Documents and administrator Settings\Temporary Internet Files\Content.IE5\3M55K0TH\KonaFlashBase[1].js
8 599 KB \Documents and administrator Settings\Temporary Internet Files\Content.IE5\X0R7BEUV\y600_1[1].jpg
8 263 KB \Documents and administrator Settings\Temporary Internet Files\Content.IE5\F2CG46SP\oreo.moo.rb.combined[1].js
7 195 KB \Documents and Settings\All Users\Application Data\AVG2012\IDS\profile\globalLoadable.bak
7 193KO \Documents and administrator Settings\Temporary Internet Files\Content.IE5\F2CG46SP\element_main[1].js
7 193KO \Documents and administrator Settings\Temporary Internet Files\Content.IE5\F2CG46SP\answers-fe-us[1].css
7 206KO \Documents and administrator Settings\Temporary Internet Files\Content.IE5\WTRRLKDA\base[1].css
6 144 ko \Documents and administrator Settings\Temporary Internet Files\Content.IE5\WTRRLKDA\wol.common[1].js
6 195 KB \Documents and Settings\All Users\Application Data\AVG2012\IDS\profile\globalLoadable.gdb
6 104KO \Documents and administrator Settings\Temporary Internet Files\Content.IE5\F2CG46SP\konalayer[1].swf
6 173KO \Documents and administrator Settings\Temporary Internet Files\Content.IE5\X0R7BEUV\luminate.min[1].js
6 135 KB \Documents and administrator Settings\Temporary Internet Files\Content.IE5\F2CG46SP\ebStdBannerEx[1].js
6 217 KB \Documents and administrator Settings\Temporary Internet Files\Content.IE5\F2CG46SP\tha-sprite-icon.1.5-24[1].png
6 183 KB \Documents and administrator Settings\Temporary Internet Files\Content.IE5\X0R7BEUV\framework-3.2_th[1].js
6 147KO \Documents and administrator Settings\Temporary Internet Files\Content.IE5\WTRRLKDA\ice[1].js
6 34KO \Documents and Settings\Application Data\Microsoft\Internet Explorer\Recovery\Active\{B60A32D1-80E0-11E2-97C6-00158315A310}.dat administrator
6 217 KB \Documents and administrator Settings\Temporary Internet Files\Content.IE5\WTRRLKDA\search[1].htm
6 300 KB \Documents and administrator Settings\Temporary Internet Files\Content.IE5\F2CG46SP\y300_1[1].jpgDefrag in safe mode may allow additional files defragmentation, but however does not allow for defragmentation of files that are in use. To be honest, I don't understand why you ask on the Defrag in safe mode when I have already informed the right way to defrag for best results.
-
Hello... My laptop restarted in April in South Africa that almost corupted as my OS etc. and I suspected was installed on the top of my friends, without uninstalling mine... I have almost stopped by MSoft until I proved the validation... I could never do without a Mr. Paton expertize to MS on this forum. I think my original office 2003 with my automatic updates of 2007 is below what has been put on her, I had virtually no memory to work with, I was up to 399 k, so I'm a disc external seagate and downloaded music & photos etc. for security and still not change in the amount of available space , so a friend says to clear everything and reinstalling his version, I said yes and he wouldn't let him do... my laptop it says not even have a c: drive... 1 laptop in 10 years to beat him, hahaha, but I still have a problem... I read on WinDerStat and downloaded and he has given it a go myself, & got about 8 GB return nearly 33%... I must say that my MSoft security updates have no problem. MSoft might cease to send only those that my just laptop dose not want them? How now to get back my old office? How can I destroy stuff that prevents these updates? Yours sincerely... liam kelly
Hi Liam kelly,See the installation history for the error code or error for the failed update.To view the history of installation, follow these steps:a. click Start, point to all programsand then click Windows Update or Microsoft Update.
b. on the Web site, click view update history.
c. find the latest entry for the specific update.
d. Note the color of the icon in the status column. If the icon is green, the update has been installed. If the icon is red, the update is not installed. It shows the status as being down.
e. click on the red X icon to get the error code or the error message for the update has failed.
For more information, see:
Keep me updated on the status of the issue.
-
Adobe Application Manager - some updates could not be installed
I just rebuilt my OS (Windows Home 64-bit 10) and reloaded my installation CD PS5. When I went to check the updates (there should be some new!), they showed me that there are updates for each product in the suite. I said to update App Manager took about 5 minutes and I was told that none of the updates could be downloaded. ("There was an error downloading this update. Quit and try again later. ") After 4 hours of this, still no luck. I use Kaspersky and I tried with UAC on and outside.
What Miss me? Is there something in the firewall of Kaspersky I need to address? (I can't find anything, but that doesn't mean no it isn't something here.) Anyone have any ideas?
If you install latest Adobe Application Manager, more updates should complete.
Adobe - Adobe Application Manager: for Windows: Adobe Application Manager
-
Some files could not synchronize - WHY?
Hello
I understand that certain characters/symbols are not valid during synchronization, but none of them do not contain file names for some of the icons I'm syncing!
Here are the files in the folder...
They are just the PNGs, without special characters/symbols.
Any ideas why these files are not sync?
See you soon
GHi Ashley
I just found the problem! When I clicked on 'Show files' he took me inside a folder and displays the icons. I just looked at the name of the folder itself, and it was "software/App icons! He had a slash. So I changed to a hyphen and it is fine now.
I noticed was my PC running Windows, one thing did not, there was a synchronization error, only the Mac.
See you soon
Glynn -
Some updates could not be installed:
Microsoft .NET Framework 3.5 Service Pack 1 and the .NET Framework 3.5 Family Update for versions of .NET 2.0 to 3.5 (KB951847) x 86
What are automatic updates will not be installed on my computer, but they always try to update. Someone knows what to do?
Baby46,
Please post with the information requested here: what to post in the Windows Update forum
Take a look at this thread because it addresses the issue of update of .net. If that isn't help then start with these steps of troubleshooting and after returned with the requested info and arises from the troubleshooting.Clean boot your PC, and then run Windows Update.
Reset the Windows Update components
Perform operations of KB883825 Mike - engineer Microsoft Support responses
Visit our Microsoft answers feedback Forum and let us know what you think. -
Exit code: 6
Please see specific errors below for troubleshooting. For example, ERROR: DF024...
-------------------------------------- Summary --------------------------------------
-0 fatal Error (s), 1 Error (s)
-Payload: DynamiclinkSupport 6.0.0.0 {DE88AA40-6766-43D3-A755-8FC374B3D2C3}.
ERROR: DF024: cannot move the file in "C:\Program Files (x 86) \Common Files\Adobe\Installers\adobeTemp\ {DE88AA40-6766-43D3-A755-8FC374B3D2C3} \_8_d0ef2c64cd8d40 254426a0f0f9c1d899.
Told to contact customer service, but could only gat forums.
Hello
Please see: -.
How to fix error Setup ERROR: DF024 in CS6
Cloud products creative installation error DF024 | Mac
You can also try:-errors 'Exit Code 6' and ' exit 7 "Code install Adobe Creative Cloud, CS6 and CS5.5 .
-
"Some files could not be synchronized.
"Some files cannot synchronize" is the error message I get and I don't know why. This is extremely annoying because I'm working on two devices; a companion of Wacom Cintiq (Windows) and Wacom Cintiq HD24 Touch (Mac). For example, I work on my companion on the road and save the file on creative cloud and want to continue with my Touch 24HD home. Yet, I can't get nothing of the cloud creative on the other device because it synchronizes the files. What is happening with this?
Please visit these links for assistance:
Creative cloud File Sync | Known issues
Using creative cloud | With creative cloud Sync application settings
-
Some files could not synchronize
Hello
I have huge problems with the creative application of cloud. I use Photoshop CC on two computers (windows 7, MacBook Pro Yosemite) and when you work on the Windows 7 machine and synchronize with the Adobe Creative Cloud application files save on the cloud, but are not synchronized at their opening on my MacBook Pro. It still shows the error which he has been unable to synchronize. Tried to stop the application, sign out / sign in but nothing works.
Hello
You can send me your please log files?
Newspapers are located in
Mac:
The log file can be found here:
/Users//Library/Application Support/Adobe/CloudSync/CoreSync-YYYY-MM-DD.log (where YYYY-MM-DD indicate the date of the last log)
Note: The user of library users folder is hidden at startup with 10.7 or higher
See http://helpx.adobe.com/x-productkb/global/access-hidden-user-library-files.html
Windows:
The log file can be found here:
C:\Users\
\AppData\Roaming\CloudSync\CoreSync-YYYY-MM-DD.log (where YYYY-MM-DD indicate the date of the last log)
Note: The AppData folder is hidden by default this doc shows how to show if necessary
http://helpx.Adobe.com/x-productkb/global/show-hidden-files-folders-extensions.html
Please the zip and send them to [email protected]
Thank you
Warner
Maybe you are looking for
-
Consolidate the question of libraries in 10.2.2
I created a library on the desktop and the second on the external drive. I have no success in Peacebuilding Office on an external drive library, I get this screen when I select consolidate. In allows consolidation tutorial by Larry Jordan, you choose
-
Just tried to get a cat to support with the support of HP through the web support page for the Pavilion x 2-filled ALL the fields then pressed next - nothing! refresh the page and just deleted input fields. So here I ask for help. I have a problem wh
-
Installation of Pavilion TouchSmart 23-f250 memory
Hi, I'm looking for instructions on installing memory for my Pavilion TouchSmart 23 - f250. I have already looked up the plug and have ordered DDR3 PC3-12800 4 GB of Crucial. This is the same type and speed of what is already installed. I have window
-
OfficeJet 7500 e910 win7 drivers for AutoCad 2012
Hello I'm trying to implement my Officejet to draw Autocad 2012 on a Win & machine. The printer is not listed as an option and said see documentation of the printer for a compatible printer for connection in AutoCad and Autocad mentions Heidi drivers
-
BlackBerry App no Lords of midnight Passport
I experienced just buy the game The Lords of Midnight on BB world to discover that the game does not work on passports. Contacted the developer who confirmed that the game was not formatted for the device. It would be nice for the exception to be me