Some more issue with WRT160N

Similar Questions

• Issue with WRT160N v2 and victory. 7

  First of all all good morning to you all - I'm new here

  OK, here's my problem.

  I have WRT160N v2 at home and his job very well.

  Two desktop (wired) and two laptops (wi - fi) worked very well until I decided to try the new Windows 7.

  Now I have a laptop (Dell Studio 1735 with Windows 7) even not see my wireless network, while the other (Dell Inspiron) work very well - as usual. Also, desktop computers connected by cable have a problem with the router at all.

  I don't have any idea what's going on, but any help would be great.

  Best regards

  Vedran

  Have you ever tried setting level or flashing of the firmware on the router?

• When Windows 10 downloads on my computer in July I have some compatibility issues with Adobe Creative Cloud?

  The arrival of Windows 10

  Will I have problems of compatibility with Creative Cloud Lightroom and Photoshop CC?

  Download a Windows Update is YOUR choice... so MY choice is NOT updated until after reading reports

• Anyone know why I have some formatting issues with my Tablet and phone of the sites? I only have the layout of office. There are banners and footers only reaching is not the edge of the screen.

  I only have the layout of office. As I had problems with the phone and Tablet page layouts. However there are are the banners and footers only reaching is not the edge of the screen. This is only a problem when accessing the site via a phone or a tablet.

  the site is www.excellententertainment.biz

  See you soon

  Hughie

  Do a Select all on your pages (most likely a master page is it effects all pages) and you'll probably find an empty element or element that goes beyond the edges of the design to the design of your office.

• Firefox 19.0.2 is having some compatibility issues with Windows 7

  When you start Firefox version 19.0.2 on Windows 7, the browser will crash immediately and gives me the crash for her window. Tried to restart the browser for several times and it still crashed on me, after that or I'm going to have to start using safe mode or run the browser by using the compatibility mode set to Windows XP (ongoing enforcement of the compatibility mode until the version of Vista works perfectly)

  Hi, try updating your graphics driver, or in case this does not solve the problem, or there is no new version available at the time, disable hardware acceleration in firefox > options > advanced > General while you are in safe mode.

• I can install Illustrator CC with Photoshop CS6 and Indesign CS5.5 or can I have some compatibility issues? I use Windows 7. Thank you...

  I can install Illustrator CC with Photoshop CS6 and Indesign CS5.5 or can I have some compatibility issues? I use Windows 7. Thank you...

  Generally, it should work, but of course there may be problems of occasional compatibility through different programs and their different versions.

  Mylenium

• I have some serious issues update to existing and new to download applications.

  Hello

  I just bought a laptop with w8
  I have some serious issues update to existing and new to download applications.
  When I click to download an app it still works but does not settle anything.
  at this point, I can't click the back (arrow) button to return to the main image of the store
  the windows button works and I can continue to use my computer
  the new application (or the update for an existing one) is not installed.
  Here are some useful points:
  -No installation other than Mc. provided McAfee antivirus preinstalled.
  -computer is not in a proxy connection
  -windows update does not work, when I click it works forever without doing anything
  -J' have tried to run the troubleshooter, but it fixes all the time the same 2 questions and that solves nothing
  -J' I reset the cache to store without change
  -without any logical explanation, some updates and downloads have managed at the beginning. then, when the problem started I have reset the cache and I could download a couple more. now everything is blocked and no solution found on this forum does not work.
  Please help me
  thanx
   
  Original title: problem with store windows

  Hello

  I suggest to run the following command and check to see if it helps.

  To fix Windows Update errors, use Deployment Image Servicing and Management.

  1. open an elevated command prompt. To do this, click Start, click programs, accessories principally made, right-click Guest, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  2 type the following commands. Press ENTER after each command.

  o DISM.exe / Online/Cleanup-image /Scanhealth

  o DISM.exe / Online/Cleanup-image /Restorehealth

  3. close the command prompt, and then run Windows Update again.

• Performance issues with large number of nodes

  I am creating an application to display graphics (large), for example:

  

  But I ran into some performance issues, even for a relatively small number of nodes in the scene graph (+-2000 in the picture above). The graph is built, step by step, adding circles and paths to a StackPane. Circles and paths can be semi-transparant. For a small number of nodes, I get a solid 60 FPS, but this decreases over time to about 5 frames per second. As soon as I stop adding new nodes, the framerate shoot again up to 60 images per second. The framerate drop even when all the nodes are outside the viewport.

  My questions are:

  * Is Platform.runLater () call to 2000 times a minute too?

  * This might just be a problem with my graphics card? (I have an Intel HD Graphics 3000)
  * JavaFX pulse recorder says such things, are there meaningful information in that I'm missing?

  PULSE: 1287 [163MS:321MS]

  T14 (0 + 0ms): col of CSS

  T14 (0 + 5ms): layout pass

  T14 (6 + 152ms): waiting for the minutes of the previous

  T14 (158 + 0ms): copy the State for graphic rendering

  T12 (159 + 0ms): dirty opts calculated

  T12: Path of the slow form for null

  T12 (159 + 160ms): painted

  T12 (319 + 2ms): Presentable.present

  T12 (321 + 0ms): completed the presentation of painter

  Counters:

  Background image of the region used cached: 14

  NGRegion renderBackgroundShape slow path: 1

  Nodes displayed: 1839

  Nodes visited during rendering: 1840

  Kind regards

  Yuri
  

  Basically, try some optimization of performance ranging from the simple to the complex.   Each of the changes below may provide you with an increase in performance.  Some will probably increase performance much more that others (depending on where is the real bottleneck).  I would probably start by replace the paths to the lines and reduce the number of Platform.runLater calls (as adding nodes that fall within the viewport can be difficult only).

  > The framerate drop even when all the nodes are outside the viewport.

  Place the nodes in the graph, which fall inside the viewport.

  > Is Platform.runLater () call to 2000 times a minute too?

  Yes, there is no reason to call it more than 60 times a minute when the framerate of JavaFX is capped at 60 frames per second by default.

  > This might just be a problem with my graphics card? (I have an Intel HD Graphics 3000)

  Yes, it's a graphics system relatively low-end.  But, look at the comment of developer below - your CPU and choice of graphic primitives can also affect rendering speed.

  > Adding circles and the paths to a StackPane

  You don't need a StackPane to this, a group is a container easier and probably better.

  > may be semi-transparant

  Remove transparency * may * cause acceleration.

  ----

  You run may be:

  https://JavaFX-JIRA.Kenai.com/browse/RT-20405 : improve the rendering of path performance

  Maybe if you use lines rather than the paths, performance might improve.

  A comment by a developer on this performance tweak application is:

  «It is quite normal for applications that use arbitrary paths (if the node path objects, SVGPath, polyline, or polygon) because these paths are rendered in software.» As card circle, Ellipse, line and Rectangle very primitive forms easily to the operations that can be performed entirely on the GPU, which makes them essentially cheap. There is no need to compare the rendering of a complicated shape for rendering of simple primitives for this reason. »

  ----

  Setting the cache indicators can help, but probably only if you animate nodes.

  ----

  Present level of detail of your graph functionality so a chart with zoom out is not make as many nodes as a part of zoomed in.

  ----

  You run any code important calculation on the JavaFX application thread that could stall it?

  Can make you available a ftom so that others can reproduce your problems?

• Is there a place I can go to to search for known issues with the applications made with DPS and the iPhone 6?

  I was wondering if there is a post or a site that lists known issues with products and applications on the iPhone 6.

  There was an application made, and for 3 devices that they all have the same problem where sometimes the app is fully loaded on the iphone 6.

  We tried to republish the content. Discovered that the problem is more than likely a connection slow or weak. I meant also more info on if there is a list of some sort with the known problems with some devices. Thank you much.

• iPhone 6 more issues of button "home" and turn off the questions

  I have two separate issues with my iPhone 6 more

  9.3.2 software (updated to try to solve this problem - question began before the software upgrade)

  My iPhone only more 6 works randomly.  I'm still able to make calls and use the phone, but the phone is constantly interrupted by these two questions.

  "Slide to turn off" or button 'Cancel' at the bottom

  (1) the phone asks me to "Slide to Power Off" - at the top of the button slide phone - with a cancel downstairs.  Slide and turn it back on does NOT resolve this problem.

  "Home" button is to take a screenshot of my current screen randomly.

  (2) when you press the button of my house, he takes a picture of my current screen instead of Act works as a home screen button.  This can happen 1 time or 10 times in a row before the home button functions correctly.

  Here is a screenshot of the camera to illustrate various photos taken.

  

  I did all the updates

  I did tap hard downs

  I backed up my phone and tried to reset to factory settings

  These are the questions randomly but are very common - a question of these two issues with caused during the use of the phone to navigate or "Slide to power off" appears randomly if the phone is not in use.

  Please help with any suggestions!

  Your sleep/wake button is pressed somehow. You have a form any case suitable for your phone that covers this button? If not, the sensor that presses the Sleep/Wake button against is missed ignition. As you even tried a factory restore, it may be clear that the problem occurs because of a case that is pressing the button somehow or the switch has gone bad.

• Firefox has issues with trend micro compatablility

  When I downloaded Firefox 4 he told me she had some compatibility problems with some parts of Trend Micro. Trend Micro has been my security of choice for the past six years and I'm not change because she saw perform very well. There is apparently no patches for the two issues being a toolbar, and I do not remember the other. I would like to know if these two problems affect my safety.

  Check the availability of an update for Firefox 4.0 with Trend Micro. If they are installing extensions in Firefox, it is for them to keep these compatible extensions Mozilla publishes new versions of Firefox. Really, you should postpone the upgrade to a new version of Firefox until you check with Trend Micro on this situation.

• AutoCAD 2007 cannot be installed.says some compatible issues.how do solve this problem

  AutoCAD 2007 cannot be installed.says some compatible issues.how do solve this problem.

  tried several times but nothing helped.
  Please help.i need to the installed program because I am a civil engineer and without this program, I have all sorts of problems.

  Hi Anuppandey,

  1 Windows operating system you are using?

  2. What is the full error message you get?

  Autodesk does not officially support the versions of AutoCAD and AutoCAD LT 2009 and older on Windows 7.

  As a work around you can try to install the program in compatibility mode and check if it helps, here is the link:

  Make older programs in this version of Windows

  You can also view the following link support Autodesk for more information:

  Microsoft Windows 7 and Windows Vista compatibility

  Hope this information is useful.

• Since the new pc will be mo more loaded with win xp, can demote us ourselves?

  Since the new pc will be mo more loaded with win xp, can demote us ourselves?

  License wise you can license windows 7 legally allows you to downgrade if you wish, for compatibility reasons.

  It's the OEM to support OEM systems, so if you have any questions, then the supporting manufacturers cannot help if what the other poster said is true insofar as they will not support a drop in ratings more.

  XP mode is a very good concept, but it falls really flat in some areas.  Printer redirection is not reliable, you can't automatically USB devices like scanners attaches, communication between the Windows 7 host and guest of the XP mode is slow if you try to use a printer or shared folder to work around the problems of redirection.

  I have not found a viable solution for companies that use older scanning applications that don't working correctly in windows 7.

• More problems with BSOD? Need help!

  So I already made a thread on the BSOD and thought that I had solved the problem. But, I've got 2 blue screens tonight. One was "IRQL_NOT_LESS_OR_EQUAL" and the fault was of ntoskrnl.exe84d5b and the other ntoskrnl.exef20d4.  I have downloaded on my SkyDrive (https://skydrive.live.com/redir?resid=5051AC31078E096A%21149), mini dump files if someone could read the files and give their opinion on what could be the cause of it, I would really appreciate it.

  I think it might be my motherboard some how, it has been with me all the time that since the BSOD. I changed almost every component.
  Someone suggested that it could be a memory error, but it's unreleased memory, I tried in another machine of friends and there not once BSOD. I bought a new graphics card, thinking that they were the cause of the BSOD but it was very good. I also bought an SSD of 335 Intel, which is quite good in other platforms. Only other thing left for material is motherboard, what could be her.
  Thank you very much.

  Anne

  These related to the nvlddmkm.sys nVidia Display Driver.  There is a known issue with this driver (December 2013).  I would come back to a previous driver (6 months old) at least until they release a new driver with less bugs.

  Also of note, you still have the remnants of Symantec, which is known to be problematic and Kaspersky (also problematic).  If updating the video driver solves the problem I delete both and replace it with MSE.

  Do not forget to disable the Auditor by typing auditor/Reset

• What I would do is change the hard drives for some more great and maybe change the CPU. Is it possible to re - install the generator in system because I'm not changing the motherboard?

  I'm running an integrator system Windows 7 64 bit on an older system. What I would do is change the hard drives for some more great and maybe change the CPU. Is it possible to re - install the generator in system because I'm not changing the motherboard?

  Original title: Windows 7 OEM System Builder

  I'm running an integrator system Windows 7 64 bit on an older system. What I would do is change the hard drives for some more great and maybe change the CPU. Is it possible to re - install the generator in system because I'm not changing the motherboard?

  Yes, you can reinstall Windows 7 OEM System Builder License on the new hard drive with the new processor.

  It will not be a problem in this case, since you don't "move" installation, you are doing a new installation. The less it will take is activation of the phone, as you change the hard drive:

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us