Sony dru720a yellow! In Manager bad drivers
I recently had to rebuild my Windows MCE system from scratch. I applied all updates and am now in SP3. I had two drives SONY DVD DRU720A and DRU840A, installed. XP will now display the yellow! in the Device Manager. I have tried to remove the devices and I have to reinstall XP, but I always get yellow! in the Device Manager. Readers have the good device list in Device Manager, but with the yellow!.
SONY's web site indicates that XP identifies the correct drivers for the devices. They also don't tell me what drivers must be used. If I knew what drivers need I could see if they existed in XP and use them.
The drivers that are used are
CDROM. SYS
GearAspiWDM.sys
IMAPI.sys
Pxhelp20.sys
Redbook.sys
Storprop.sys
I know that the DVD/CD drive works because I used to reinstall XP.
So I think that it is a XP problem. XP does not even recognize a CD/DVD when I close the drawer.
How can I solve this problem.
Hello
1. check the status of the device in Device Manager. Follow the steps for the same thing:
a. click on start
b. click Run, in the Run dialog box type devmgmt.msc
c. in the Device Manager window, locate the CD/DVD drive and expand the drive, double-click the sub element to check if an error message or error code is listed.
2 install the updated firmware for the drive and check if it helps. Link: http://sony.storagesupport.com/product/116#drivers
You can also run Sony DriveCheck Diagnostic tool: http://sony.storagesupport.com/product/210#drivers
Tags: Windows
Similar Questions
-
Vista installs bad drivers for my network card
I just reinstalled vista service Pack1 wouldent installed cus and it dosent always install, but it's a different problem
My problem now is im trying to install my card on my dell inspiron dell wireless 1501 but it does not find the proper equipment when I try to install and im 90% sure its because windows instaklled bad driversVista it's a broadcom 802.11n network when its broadcom even not at all and it is a wireless network not just any card installationthe device DOESN'T WORK so I can't install the network driver and I need to fix thisI got it on my last installation but have no idea how I managed to do workdo not uninstall the bad cus vista driver installs that incorrect installation of the rightI tried to disable it and I tried to do it in safe modeits after a clean installhis vista home edition premium its active, legitimate and its 32-bitEDIT: NOTICE, I said im TRYING to install and it would be IMPOSSIBLE to try to install without the driver on the pc exe, which means that I ALREADY HAVE THE FILEWhen I reinstalled vista until I did I saved important files on a USB port, including the installation of the driver EXEI FINALLY got their work
but your 'support' SUCKSDouble click on the EXE copy save files for the installation EXE and NOT using the installer because of VISTA, which in fact think that it was not material for that hewent to Device Manager and the vista of material THOUGHT I had and used the Device Manager to install files the orgnal EXE unpacked right clickGET THE BEST SUPPORTas no one here has obvously NEVER had experience dealing with problems of this kindIt is not Microsoft.
Happy that you guessed it sorted.
-Instead of ever having to do it again - find a way to make an image of the system once you have a fixed point, but perhaps without all your personal data back on it yet (to control the size of the image) as * if * you must do this again - you can just restore the image and start from a point where all the drivers are working and your basic programs are installed and updated.
Now - what your problem of SP1 and SP2 get installed?
How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues
Download the FULL SP1 file and save it to your desktop and run it from there:
http://www.Microsoft.com/download/en/details.aspx?ID=30After a few restart - just because - do the same for SP2:
http://www.Microsoft.com/download/en/details.aspx?ID=16468After a few reboots, then start watching the other updates.
If none of the troubleshooting steps Gets the SPs installed, you can check for an update of the BIOS as well. Download installed.
-
E7240/E7440 - Intel Management Engine drivers Hangs Windows 7 Setup
Hi all
Wonder if anyone else has problems with installing Windows crashing with the Intel management engine Drivers injected directly into the WIM image?
The error message that appears when the installation says "Windows cannot configure one or more system components. To install Windows, restart the computer and restart the installation. Once restarted, it will shut with the message "the computer restarted unexpectedly or encountered an unexpected error." Windows Setup cannot continue. To install Windows click OK to restart the computer and then restart the installation"I have check the logs in X:\$WINDOWS.~BT\Sources\Panther\, but can't find anything useful (or understand).
Can I get the installation to complete, excluding the drivers of the EMI, but this leaves the device with no driver in the Device Manager. The same drivers can be installed manually with any questions after that Windows has finished installing.
The review of pilot for the latitudes of 7 series I use is A00 published 06/09/2013.
Some Windows 7 drivers for new Dell systems may require an update of the KMDF to version 1.11. The KMDF is a component of the operating system and the software update is available from Microsoft at the link below. The usual treatment is to include the KMDF update in your base image until it is wrapped in a service pack. Some of you may remember to see this problem with XP/Vista when Win7 came on the scene.
Symptoms that a KMDF update is necessary for a Windows 7 driver:
1 yellow bang in Device Manager for the components that you know you have a driver available
2. black screen during OS deployment
http://www.Microsoft.com/en-my/download/details.aspx?ID=38423
Please post back if it helps solve the problems you are having.
-
How to upgrade to bad drivers on my computer? I have ten who need updates
I used a Web site to search for problems with my computer and he returned with 10 bad drivers that require updates. How do I update?
This analysis, while it may show that your system does not meet the requirement for a game in particular, should not be used, or any link it can provide to update anything, if a free upgrade or paid for the update.
The manufacturer of the particular game will on its site the requirements, and if your system does not meet the requirements more game.
Your PC manufacturer provides updates driver for no cost, in the case of an office of the generic drivers are taken from the manufacturer of the motherboard and the other installed hardware manufacturers, for example graphics cards
-
Device Manager - lack drivers?
I tried the matrix and tried to look for the answer, and even the the thinkvantage system update did not work...
I still see "Base system device" and "Controller of Bus SM" pilot is missing in Device Manager...
anyone has any ideas how to fix this?
I have win 7 64 home premium and computer specifications are below in my signature...
Thank you!
then I went in, and click Device Manager on the device with the missing drivers...
then I clicked on properties and went into the Details tab...
Select the ID of the hardware and then searched in pcidatabase... first of all by the seller, then the hardware id...
the ricoh card reader and chipset driver intel have been identified and had direct download links available on pcidatabase that I then downloaded and installed...
for some reason any I have not found that the right downloads in the matrix of lenovo, even though I thought that I had downloaded and installed these two drivers already...
in any case, it is fixed!
see you soon
Daniel
-
How can I fix bad drivers?
The BSOD keeps appearing again and again. Nothng could help me to enter my laptoop, same syestem restore help force... I was able to boot from safe mode as well. I therefore had to back up all my files and opt for the backup of dell and restore my pc. Now, my laptop works but keeps stopping still and always help... I don't know how to find the faulty drivers. I want to say that I never found an exclamatory mark or whatever it is next to a driver. 0 × 0000006b is an error that keeps coming back. Please help me.
Visit the Dell Web site and look for updates for your drivers.
You can download BlueScreenView to see that a summary of all the bug checks that you have found.
http://NirSoft.NET/utils/blue_screen_view.html
0x6B bug control is more likely to be caused by a bad disk as a pilot. You must run Dell diagnostics that it looks more like a hardware error.
-
Computer laptop Sony Vaio tries to install additional drivers required to install disk
HELLO SIR
I USE SONY VAIO WITH WINDOWS 7 INSTALLED. I WANT TO GET MY DRIVERS ON A DVD BACKUP. I COULD NOT THEM. WHENEVER ITS ME ASK TO INSERT EMPTY DISC EVEN IF I PUT IT. I WANT TO GET WINDOWS 8 IS INSTALLED IN MY LAPTOP.
PLEASE HELP ME SIR.
Thank youYou cannot back up the drivers on the dvd, you can create the recovery disks, as instructed by Sony.
But before installing win8 you must first check with support from Sony as to whether win8 is supported on your model.
You must also run the Win8 compatibility checker
-
Bad drivers nvidia for Satellite A100 (PSAA9)
I downloaded the drivers nvidia 97.45 but this driver recognizes my card GeForce Go 7600 NVIDIA Quadro NVS 110 M. Is there something wrong with the drivers?
Nvco.inf, I found that there is not only support for this last card. What is going on?
Hello
Can you please download driver and test again? Please report the results.
-
Pavilion g6 2323sw: bad drivers - RADEON HD 7670 M
I have problems with my Radeon. When I turn off Intel HD 4000 Radeon runs, I have a message that Radeon drivers work correctly or that they are not installed.
I had already uninstalled drivers and install the drivers from the site of AMD, HP, and the problem is not yet solved.
Could someone help me?
Hi @adiqoo
Welcome to the HP community! I see that you have a problem with your graphics card. By disabling your Intel HD 4000 you mean that you turn off completely or you use the Catalyst Control Center for everything set to High Performance?
Because you have switchable graphics, you need to install the drivers on the HP site because they have been configured to work with switchable graphics. AMD drivers have not been configured to work with switchable graphics.
-
OK, so I'm missing some drivers on this device of 9470 m EliteBook Folio:
Base system device:
Properties:
Hardware ID:
PCI\VEN_197B & DEV_2392 & SUBSYS_18DF103C & REV_30
PCI\VEN_197B & DEV_2392 & SUBSYS_18DF103C
PCI\VEN_197B & DEV_2392 & CC_088000
PCI\VEN_197B & DEV_2392 & CC_0880
HP hs2350 HSPA + MobileBroadband:
Properties:
Hardware ID:
USB\VID_03F0 & PID_3D1D & REV_0000
USB\VID_03F0 & PID_3D1D
SM Bus controller:
Properties:
Hardware ID:
PCI\VEN_8086 & DEV_1E22 & SUBSYS_18DF103C & REV_04
PCI\VEN_8086 & DEV_1E22 & SUBSYS_18DF103C
PCI\VEN_8086 & DEV_1E22 & CC_0C0500
PCI\VEN_8086 & DEV_1E22 & CC_0C05
Unknown device:
Properties:
Hardware ID:
ACPI\HPQ6000
* HPQ6000
There are four that I'm missing on this machine. I got rid of two of them through the Dell site but others are a pain in the... to find.
Hello:
Here are links to the drivers you need:
SM Bus controller: Install this driver first and then restart.
Base system device:
HP hs2350 HSPA + MobileBroadband:
Unknown device:
-
Manager uninstalled drivers and now front usb detect device not
try to use life cam nx6000. CD did not went to the downloaded driver to internet Manager. then found download microsoft. uninstalled the driver manager and now the usb port before are not detecting the camera or ipod nothing.
I ran the SFC / scannow, that's where the problem was detected, but like I said I am as far as I can go
Respond to this request on audio, video, and motherboard and continue with the rest of the instructions. In other words - skip the SFC/scannow (although where you got the original, I'm not sure.)
As for the SFC/scannow... Have you read through this article?
http://support.Microsoft.com/kb/929833In particular, the part that starts with:
"To determine which files can be repaired by the System File Checker tool, follow these steps:and continues with:
"If the System File Checker tool cannot repair a file, follow these steps: -
Bad drivers wireless for my product.
I (Dell system detect):
Inspiron One 2320 (mid 2011)
Service number: ADMIN NOTE: maintain the label removed by privacy policy > | Express service code: ADMIN NOTE: kidnapped by the Express service code privacy policy >
I need to reinstall the drivers for my card.
Site gives me only the Atheros drivers for my product, but my wireless card is:
Intel Centrino 6230
and I need
Intel ProSET/Wireless drivers v.14.01.1000
Where I take it?
Hello
Try to download the driver from http://dell.to/1Ign2q6 .
Thank you.
-
His problem in Windows XP Home - a yellow! in the Device Manager on satellite
When you install the audio drivers that it finds a modem on hih def audio, then when you restart it throws an error message upward. I rolled back the driver but still need to solve the problem of noise, in Device Manager, I have one yellow, another device, PCI device.
Audio drivers appear to be there and working, the drivers are inheritance this is just? It looks like a conflict somewhere. I went from Vista after network problems now XP has sound problems.
Ideas please
Hi David
I ve checked your other assignments created here in the forum and it seems that you are an owner of Equium A100-027 PSAAQE series.
Am I wrong?First of all, I would like to clarify a few things.
Especially the yellow exclamation points appear in the Device Manager because anything could go wrong during the driver installation procedure or you have used everything simply a bad drivers.I think you first need to know if you have used the correct drivers!
Please go to the page of the Toshiba driver and check again the driver versions and download again.
I noticed that many users download the bad drivers and try to install it.On the Toshiba page, you will also find installation instructions. There are 2 txt files.
One for XP and one for Vista.Please make sure you use the appropriate for the good OS installation instruction.
Download all the drivers, then follow the order of installation mentioned in the txt file!Normally, everything should work ok and you should be able to install any drivers!
Best regards
-
How do I use the sony vaio VPCEC3S0E built in motion eye camera I have attached looking for the correct drivers but could not locate them
Hello
Troubleshoot camera connection
http://Windows.Microsoft.com/en-us/Windows7/Troubleshoot-camera-connection-problemsYou probably need to recharge the device drivers and camera control software (usually included
with the drivers and installed at the same time).Login as an administrator.
Double-click Control Panel / Device Manager - Imaging - writing down of the brand and model of camera.
on this subject and on the tab of the driver is version. Now, click on update drivers (who are unable to do anything as MS
is far behind the pilots of certification). RIGHT click on the camera - UNINSTALL - REBOOT - it
will update the driver stack.Now, go to the system manufacturer's website and download the latest driver for the camera and the other related camera
software (if not more recent get the same).Download - SAVE - go to them and RIGHT CLICK - RUN AS ADMIN - reboot after each driver.
Manually look at the sites of the manufacturer for drivers.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmInstallation and update of drivers to 7 (update drivers manually using the methods above is preferred
to make sure that the latest drivers from the manufacturer of system and device manufacturers are located)
http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.htmlThen let windows updates on however prevent loading of drivers who are often older than the
those that you have installed. If updates suggests a pilot and then HIDE it and watch manually to see if their
really is a more recent version (at the time system manufacturer and the sites of the manufacturer of the device).Stop Windows 7 to automatically install device drivers
http://helpdeskgeek.com/Windows-7/stop-Windows-7-from-automatically-installing-device-drivers/How to disable automatic driver Installation in Windows 7 / Vista
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/Turn off Windows Update Device Driver search prompt in Windows 7 / Vista (for professionals,
Ultimate and Enterprise)
http://www.AddictiveTips.com/Windows-tips/disable-Windows-Update-device-driver-search-prompt/----------------------------------------------------------------------------
Check with the Sony Support, their online documentation and drivers (update or reinstall).
and their forums.Sony - Contacts
http://eSupport.Sony.com/us/Perl/contact-land.plSony - drivers
http://eSupport.Sony.com/Perl/select-System.plSony - Support
http://eSupport.Sony.com/Sony - Forum
https://Forum.sel.Sony.com/?XID=M:Showcase:eSupportI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
Satellite 1800-100: bad XP drivers?
I visit the pages of pilot official Toshiba via the homepage of support, but as this link and Satellite 1800-100 pilots are wrong with OS compatibility:
I selected and download drivers for Windows XP, but none of the drivers can be installed under XP because of these messages:http://support.toshiba-tro.de/tools/satellite/S1800-ps181e/win-XP/IrDA-XP-41019995.zip-impossible to install the infrared driver because of this message: "it is a different style INF" - it is made for Win ME.
Also "Aladding Cyberblade - Trident' display driver for XP cannot be installed, the message:"the driver is not compatible with XP.
Why are there bad drivers on Toshiba support satellite 1800-100 pages?
Also how can I run "Wireless link" for an infrared connection, whatever I do, I can't open 'wireless link in Control Panel icon', I click on it but it does not open without any alerts.
Help, please.
Thank you.
I can't believe that. I n t have this unit but I have download several drivers, unzipped, and he seems to be good.
In any case, try to use the drivers provided by the other 1800 satellite.
I found the description in the option more information that most of the drivers are the same on the Satellite 1800.Check it out
Maybe you are looking for
-
Can no longer Watch youtube videos, on the incomplete cryptographic error
don't install any updated, but, videos youtube no longer play. Get an error on the site do not provide identity information. address bar shows a triangle with exclamation point at the beginning of the url of the youtube video
-
I changed the forwarding to one of my areas address a week or two ago. When I go on this site on my laptop (on Firefox), it pulls to the right address. On my PC, the old site is one that shot of Firefox in again, when I go on Internet Explorer on my
-
Can someone please post example LabVIEW NI 5782 - put on the way
Hello I want to test the module for NI 5782 adaptation with the FPGA NI FlexRIO PXI-7954R module as target. Unfortunately I have the sample project is corrupted and I can't reinstall it. Can someone please send the sample project NI 5782 - getting st
-
WinDBG is unable to download the correct msxml4.pdb file.
I am trying to scan a file dump with Windbg. I get a PDB file not found error for msxml4.dll. Is there a PDB file for this version somewhere, or how I can work around the error and analyze the dump without a pdb file file. News of WinDbg msxml.dll ve