Sony Vaio F series performance is slow on batteries...

Similar Questions

• computer laptop Sony vaio S - series VPCS133GN, operating system windows 7 Professional (64 bit) genune, these days, my pen drives are not installation and opening

  I use a computer laptop sony vaio S - series VPCS133GN operating system windows 7 Professional (64 bit) genune, last few days my pen drives are not installation and opening. Kindly help me.

  Best regards

  A.C. Dutta

  Hi Johanna,.

  Thanks for posting your query in Microsoft Community.

  I understand that you can not use the USB in Windows 7.

  I imagine the inconvenience that you are experiencing. I will definitely help you with this

  1. you get any error message?

  2 have you tried using different USB ports?

  3. any other USB key works on the computer in question?

  4. do the USB works on any other computer?

  5 have had any changes made to the computer before the show?

  Please follow the methods.

  Method 1:

  Run the Microsoft fixit for the link.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 2:

  As all devices have same also have USB device associated drivers. Appropriate sometimes drivers not detected after initial installation so reinstalling the drivers can fix the problems.

  You can check after uninstalling and reinstalling USB drivers if you are able to connect. You can disconnect all USB devices and then perform the following steps:

  (a) click Startand then click Control Panel.

  (b) click system and Maintenance, click System, and then click Device Manager.

  (c) Note if the control panel is in Classic view, double-click Systemand then click on Device Manager.

  (d) If you are prompted for an administrator password or a confirmation, type the password, or click allow.

  (e) in Device Manager, double-click to expand the "USB Bus controllers", right click on the controller host, click "Uninstall" and click "OK".
  Check that if at all, there is an exclamation point on the pilot, it suggests problems with the installed driver.

  (f) repeat step 2 to uninstall all items under 'USB Bus controllers'.

  Then, restart your computer and Windows 7 will automatically reinstall all USB controllers.

  We would be more than happy to help you if the steps above did not solve the problem.

• SONY VAIO F Series SVF15412CXB does support dual channel memory?

  SONY VAIO F Series SVF15412CXB does support dual channel memory?  Or is it only a slot?

  I'm curious to know if I can put a second stick of RAM in there for performance dual channel.

  Hi gremark,.

  I understand you want to be sure of everything. I checked the service manual for this model and even tried to open a laptop of the same type and I can assure you that this model supports the double delivery. You can add up to a stick more than 4 GB of ram to increase the memory capacity.

  ~ Mark

• WIFI ON MY SONY VAIO E SERIES SAYS WINDOWS WIRELESS SERVICE DOES NOT

  My Sony VAIO E Series windows wireless service does not

  the computer says that

  Hi Isabel,.

  1. Exactly when you receive this message? It's trying to access wireless internet?
  2. What is the exact model of your PC laptop Sony Vaio E series?

  Make sure that the laptop wireless switch is turned on.

  Method 1:

  Please follow the steps to start the WLAN service.

  1. Press the Windows key and R together to open run prompt and type services.msc
  2. Select the autoconfiguration WLAN service in the list, right-click on properties
  3. Change the startup type to automatic
  4. Click the Start button
  5. Click on apply, Ok.
  6. Restart the computer and check if it works.

  If the problem persists, proceed from the link below to fix this problem.

  Wireless and wired network problems.

  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-81&V1H=win81tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Reply to the post with an up-to-date report of the issue so that we can help you further.

• I am not able to install windows on my laptop sony vaio SVE15111EN series 7(any version). Error 0x8007045D

  I am not able to install windows on my laptop sony vaio SVE15111EN series 7(any version).

  Often, I get an error 0x8007045D.
  I made a Dvd of ISO to burn at 4 x speed. I checked the burning process.

  This means that theres a problem with your hard drive

  The car manufacturer has a utility bootable disk from audit

• I get formatted my laptop sony vaio e series & now how can I turn on the built-in camera & bluetooth.

  I get formatted my laptop sony vaio e series & now how can I turn on the built-in camera & bluetooth.

  Assuming that you used your Sony disks restore those characteristics have been resettled

  See Sony support/help pages

• Webcam not working not not for sony vaio e series vpceb14en

  my web cam web cam sony vaio e series vpceb14en does not work.

  Then display help on the Sony support site or their forums

  http://www.Sony-Asia.com/support/product/VPCEB14EN

• How to turn on the backlight for the keyboard in Sony Vaio T series Ultrabook running Windows 8

  Original title: keyboard light... I NEED HELP!

  I just bought a Sony Vaio T series Bu201 windows 8. Does anyone know how I can change the bright keyboard or so-called backlit keyboard... I tried to find an answer, but even on the settings does not say how can I activate...

  Thank you, I called and found out that my laptop does not come with this feature :/ I got a Sony Vaio four years ago and it came with the keyboard feature which is why I thought it came with it too... In my opinion, any computer laptop should come with the option to turn on or off!

• Keyboard and touchpad not working not not after reboot. Windows 8 Sony Vaio T series Ultrabook.

  My Sony Vaio T series Ultrabook running Windows 8 froze during the execution of a program. The Task Manager does not work, so I used the sidebar on the touch screen to restart. Once I had restarted, or the keyboard or the touchpad worked besides than the backlight on the keyboard. I tried to use the restore system to return a few days, but without success. In my device manager, there are yellow signs next to my keyboard and touchpad. An external mouse does not work either! After a repair, he says: my computer has problems with PnP devices. I can browse only my computer with its touch screen and it's very tedious. I need this computer to type for the school. Help, please!

  Hi Darklo,

  I suggest you follow the methods listed below. Before continuing, please answer the question below.

  (1) what is the program that you try to run?

  I suggest you to follow the below methods and check if it helps.

  Method 1: Run the hardware troubleshooter and check.

  Follow the steps to run the Troubleshooter:

  (a) press the Windows key + C on your keyboard to display the bar of charms.

  (b) type of Troubleshooting , and then click solving problems under settings.

  (c) now, type Hardware Troubleshooter in the option Search .

  (d) click on hardware store to run the troubleshooter.

  Also try to update the drivers for the keyboard and the touchpad.

  Method 2: Update drivers for the keyboard and the touchpad.

  (a)  , press the Windows key + R, type devmgmt.msc.

  (b) right click on the keyboard.

  (c) click on Properties, click the driver tab.

  (d) click the Update driver button.

  (e) click on the OK button.

  Similarly, follow the steps to update the touchpad.

  Method 3:  Run the Microsoft safety scanner.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note:

  The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Important: During the scan of the hard drive if bad sectors are found, the scanner tries to repair this sector, all available on which data may be lost.

  Hope that this helps, if you have any additional questions, feel free to post. We will be happy to help you.

• My Sony Vaio E Series model VPCEB32FM CD/DVD ROM is not working or projection upward. Please notify

  My Sony Vaio E Series model VPCEB32FM CD/DVD ROM is not working or projection upward. Please notify

  I tried to remove and reconnect.  I tried to look in the Device Manager.  I tried the patch Microsoft Fixit. None have seemed to work.

  What are some solutions.

  Thanks in advance

  cmczona,

  Did you try to apply this difficulty? If you have, and it still doesn't show, try to start it.  Make sure that you have a bootable disk and make sure it is set to boot from the optical drive in the BIOS first.  If you can't then it's a hardware problem and the player or another material is defective...

• Sony Vaio Z - improved performance with docking station

  Hello

  I recently bought the sony vaio z at the station and noticed the graphics performance decreases when the docking station is attached. The Windows experience index - I have a rating of 6.5 for the graphics when using the integrated graphics card Intel 4000 and a 6.0 with the graphics card ATI 7000series. Is this good? Is there a setting I should change to fix this? I think that the ATI graphics card is better than the integrated Intel graphics card.

  Thank you.

  Hello

  I recently bought the sony vaio z at the station and noticed the graphics performance decreases when the docking station is attached. The Windows experience index - I have a rating of 6.5 for the graphics when using the integrated graphics card Intel 4000 and a 6.0 with the graphics card ATI 7000series. Is this good? Is there a setting I should change to fix this? I think that the ATI graphics card is better than the integrated Intel graphics card.

  Thank you.

• Sony vaio fw Series notebook PC hangs after complete recovery using the recovery disk

  I have sony vaio fw notebook computer series. the problem is that a week ago my laptop keyboard did not work properly, his work of sttops not all but a few keys and I stop directly by using the power button / stop and then I turn it on after day and the computer started to freez. I though I could get rid of this by restoring the complete system and I did it by using the recovery disk that I created at the firrst time I've had this laptop. during the recovery process, my laptop crashes twice but in any case, I managed to do thanks to a system of complete restoration and after that when I turn on my laptop, then it worked fine for 10-15 minutes but after that it started to freeze up again. I had to stop it again using the button / stop and it happened about 5 - 10 times, after that I decided to do a full restore using the restore disc. as I was doing that the process is not complete because it crashes when I do this. Finally, I managed to do a full system restore after more than 10 + time and guess what it lights up then my laptop crashes completely. I can't open anything... mouse works very well but if tried click on any program then you can not click on it, please help what should I do now... p.s, my computer works fine in safe mode with networking, but in normal mode its completely freeze

  Hello

  Go to the Sony website and download the latest Vista drivers for your model.

  http://eSupport.Sony.com/us/p/select-System.pl?model_type_group_id=10

  If the problem persists after that, you may have a hardware problem.

  See you soon.

• Sony Vaio E Series SVE1513KCXS Ram

  Hello

  I was wondering about upgrading RAM for my SVE1513KCXS. I currently have 8 GB installed with two slots. That means it has 4 and 4? So, I get the 8 x 2 to get the correct 16? Here is the link to the site:

  http://www.crucial.com/upgrade/Sony-memory/VAIO+SVE+series/VAIO+SVE1513KCXS-upgrades.html

  Hi scotthafoo!

  I checked and Yes your VAIO x 2 slots of memory. However, the maximum memory capacity is only 8gigs. Here is the technical information of your device - SVE1513KCXS. I hope that helps!

  -MarkC

  If my post answered your question, please mark it as "accept as a Solution.

• Where can I get a replacement for Sony Vaio E series SVE111 keyboard

  Hi, I have a Sony Vaio laptop 11.6 ", SVE111. I need a new keyboard for this evil, no idea where to get one? I googled on the net and I can not find anywhere that carries parts for this particular model. Thank you.

  Wow, no answer?

• DeskJet 3050 has J611 printer, windows 7 64, sony vaio F series with router netgear seem incompatible

  I was able to connect successfully the printer to my computer sony vaio notebook, as much as I first disconnect internet router, after that the installation I can connect internet once again, then it works for a few hours. However, when I turn off and restart the computer, the computer does not find the printer. Meanwhile, the printer is connected and has the correct network and are accessible from my Ipad or eprint, but not of my sony vaio. I tried all the solutions proposed in the various forums without success. Can anyone help? I also checked that my computer is on the same network. The printer appears "shadow" under devices and printers. Thanks in advance.

  What router are you using?

  We will set an IP address of the printer:

  -Print a the front of the printer Network Setup Page. Note the IP address of the printer.
  -Enter the IP address in a browser to reveal the internal settings of the printer.
  -Choose the network tab, then wireless along the left side, then on the IPv4 tab.
  -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). You can find the beach DHCP from the router using its internal settings page or in its manual. Use the CD that came with your router or type the IP address of the router (ends para.1) in a browser.
  -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
  -Enter the IP of your router (on the Page of the Network Config) for the gateway.

  -Enter for the first DNS 8.8.8.8 and 8.8.4.4 for the second.
  -Click 'apply '.

  Now, stop the router and printer, start the router, wait, and then start printing.

  After that, you will have to redo 'Add printer' using the new IP address.