DeskJet 3050 has J611 printer, windows 7 64, sony vaio F series with router netgear seem incompatible

Similar Questions

• HP Deskjet 3050 has J611 printer without a driver.

  What happens to my driver for my printer HP 3050 has J611 it saids no driver?

  [Moved from comments]

  Hello

  Uninstall and reinstall your printer by using the drivers and information on the HP website.

  Equip your model number of the printer for this information and troubleshooting for her.

  http://WWW8.HP.com/us/en/support-drivers.html

  Or ask in the Forums of HP's Support.

  http://h30434.www3.HP.com/PSG/

  See you soon.

• DeskJet 3050 has J611 printing project

  So I have a 3050 a J611.  I want to adjust the print quality settings and it won't let me.  I'vegot best, Normal, project and custom, but only Normal and custom are selectable.  I want to be able to select one of them, why can't I?

  I was looking just at things once again, and it's sort of silly system.  Quality is selectable in the tray press selection section.  I think they have just forgot to remove the redundant part for quality selection.   v

• DeskJet 3050 has J611: printer interrupts the headers and footers

  Hello

  When I print my documents, the printer cuts the headers and footers. I use Microsoft Word 2013 and have checked to make sure that the margins are narrow as Tess in Word, but the printer cuts my headers and footers. An error message appears that reads the document is out of print areas. This is a mistake with my printer, and if so, what is the solution? Thank you very much.

  @jun_per

  The specifications have not any information on restrictions "margins".  In general, the high margins and the size may be restricted a.11 inches, while (for some printers / paper) the background may etre.5 inches.

  IF the printer like / limit top / bottom margin a.5 inches, so that the word 'Narrow' margin setting may be in conflict with the ability of the printer to print the document.

  Maybe you can change the margins of the document 'Normal' or something similar.

  You can also adjust the settings individually.

  Word Document > file > Print > click on layout > layout tab

  Check to see where your headers and footers are defined compared to the whole "Narrow margin" setting.

  You can adjust the header and footers downwards / upwards away from the title of the document / paper edge.

  Example:

  Word Document > Insert > footer (drop down menu) >

  (look at the bottom of the parameters available footer) Change the footer > adjust as you wish

  General help, suggestions and examples:

  Manage the print with preview output before printing

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  My answer-click accept as Solution to help others find answers.

• DeskJet 3050 has J611 all-in-one: Mac cannot connect to the printer using the wireless configuration

  My printer is connected to the same network as my Mac. When you complete the Setup wireless using a USB in system (HP Utility) preferences, a message says: "wireless network settings have been successfully downloaded to your device. However your Mac could not locate the device on the network. »

  I did everything I could: restart the printer. Unplug the printer and reconnected on the network and configuration of try again several times.

  Help?

  Hey @benjaminllim,

  Welcome to the Forums of HP Support!

  I understand that you have some problems with the connection of your Deskjet 3050 has e-all-in-one printer to your computer Mac OSX 10.11. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once done:

  1. Turn the printer off:
  2. While the printer is turned off, disconnect the power cable from the back of the router for a minute.
  3. When the lights come back on the router, turn on the printer.
  4. Disable any antivirus, firewall or security of your Mac software.
  5. Try to run the installer.

  Please let me know the results after following the above. If you are able to print to the printer, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• HP Deskjet 3050 has J611 series watch in trouble with wireless printing

  Hey there,

  I have just a series of combat a HP Deskjet 3050 printer a J611 and wireless printing to work perfectly. However, for the last week or so is no more.

  The printer is connected to the network, as the result of the wireless network test is proven and it is the same network that the laptop is connected to. I have already uninstalled and reinstalled the software. The wireless light is on and I can see the signal strength and the IP address. However, it still works.

  I also I sent an email to the printer to see if it worked. Initially, I received an automated email saying my printer is not connected to the internet and then printing will be delayed. I didn't touch the printer after that, but about 6 hours later it started to print.
  I also tried to connect the printer with a USB key and configure settings wireless via USB does not work either. The computer cannot find a printer connected to the network. There is no firewall blocking the application or the printer.

  My settings:

  Router broadband wireless ADSL2 + -.
  Huawei EchoLife HG521
  TalkTalk
  Laptop - Medion Akoya E7214
  32-bit operating system
  Windows 7 Home Premium

  Help with this would be much appreciated! Thank you!

  Larissa

  I doubt disturbed the other printer.  Kaspersky can be a problem, but we're going to explore other things first.

  We will set an IP address of the printer:

  -Print a the front of the printer Network Setup Page. Note the IP address of the printer.
  -Enter the IP address in a browser to reveal the internal settings of the printer.
  -Choose the network tab, then wireless along the left side, then on the IPv4 tab.
  -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). If you do not know the range, change the last set of numbers (those after the last '.') 250
  -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
  -Enter the IP of your router (on the Page of the Network Config) for the gateway.
  -Enter for the first DNS 8.8.8.8 and 8.8.4.4 for second DNS.
  -Click 'apply '.

  Now, stop the router and printer, start the router, wait, and then start printing.

  After that, you will have to redo 'Add printer' using the new IP address.

• DeskJet 3050 has: Scan Options window

  Hello

  I have the DeskJet 3050 a printer and when I scan something it automatically scans in JPEG format. As I want to change my scans, I downloaded and installed the OCR software (I followed the instructions posted on the support forum HP, installation of the software for the HP Pro 8500 printer A910n JO). After you install this software, however, I can't find a scan window that allows me to choose the format for the scan options I'm about to do -: in other words, I don't have a window which now allows me to choose the RTF rather than JPEG. Do you know where I can find it?

  (the instructions given on the Support forum for this step are: 4) now open the HP Deskjet 3050 scan window. Select "Scan" everyday and in the dropdown for "Type", select "Rich TEXT" or «indexable PDF»

  (My problem is that I can't find the window of scanning HP DeskJet 3050 - and constantly scans automatically to JPEG format)

  Thank you

  First of all, you must have the drivers and software HP Deskjet full functionality installed.  The scanning software provided with the HP Deskjet 3050 does NOT include OCR capabilities.  However, the HP OfficeJet Pro 8500 a A910n printer come with OCR capabilities.  Thus, the installation of the software and driver for the OfficeJet included installing the OCR package that can be used by the HP Deskjet 3050 HP scanning software and the product HP OfficeJet.

  The HP scanning software are accessible in several ways:

  • #1 method - the Windows 7 Desktop: start-> all programs-> HP-> HP Deskjet 3050...-> HP Scan
  • #2 method - the Windows 7 Desktop: start-> all programs-> HP-> HP Deskjet 3050...-> HP Deskjet 3050...
  • Method #3 - Windws 7 Office: find HP Deskjet 3050 desktop icon; If it is present, run (double-click on).

  Method #2 and #3 will launch the Desktop Client software. Under the analysis section, choose 'Analyze a photo document' to launch the HP scanning software.

  • Method #4: Navigate to C:\Program Files (x 86) \HP\HP Deskjet 3050\bin; Run Scan.exe HP (double click).  (Note: the C: drive is the default installation drive, change accordingly if you have installed the software on a drive by default.)

  In the HP scanning software, you should see a number of shortcuts named Scan on the left panel of the dialog box.  Select the Scan shortcut named 'Scan' every day and change type of file to RTF settings in the right pane of the dialog box.  You can also create your own Scan shortcuts and configure the settings for scanning for this Scan shortcut to your liking, including the file type.

  Click on 'accept as Solution' if it has solved your problem, while others may find it.
  Although I am an employee of HP, I speak for myself and not for HP

  Give Kudos to say 'Thank you' by clicking the 'PLoP icon '.

• Synchronization problems Blackberry Bold 9700 with Bluetooth of Windows 7 drivers Sony Vaio SZ series

  I have recently upgraded to Windows 7 with a clean reinstall on my laptop Sony VAIO VGN-SZ470N. Full specifications can be seen here: http://www.sonystyle.com/webapp/wcs/stores/servlet/ProductDisplay?catalogId=10551&storeId=10151&langId=-1&kw=vgn-sz470n/c&lp=8198552921665095013&productId=8198552921665095013#footNotes

  My goal: to sync my new Blackberry Bold 9700 wireless via bluetooth using the built-in radio. Many people have had problems with this and the forums are littered with solutions that have worked for others, but I'm having no luck.

  So-called: Device Manager software Blackberry won't recognize devices that are managed by Windows Native Bluetooth stack.

  What I did:

  Windows will automatically detect my bluetooth radio and installs the "Bluetooth USB Controller (ALPS/UGPZ6)" (hardware ID: USB\VID_044E & PID_300D & REV_1915, USB\VID_044E & PID_300D) driver. With this driver, I can go to the "add a device" with my phone in discovery mode, and the computer will not conclude it.

  If I go in ' control panel-> add devices ", the Add Device Wizard window will tell me it's looking two detectable Bluetooth devices found in the range. I went into control panel of-> see devices-> UGX (which resembles a bluetooth adapter bit) and there was no "bluetooth settings option when I would right click."

  After reading on the Blackberry forums that the BB only synchronizes with the Bluetooth of Windows stack, I updated my driver ALPS/UGPZ6 to "generic bluetooth adapter. The selection of this driver also installs driver for "Microsoft Bluetooth Enumerator. It also adds the bluetooth icon in the lower bar of good start near the time and date. I can now go to 'Add a device' and it will show my BB 9700. When I connect, matching Assistant is displayed on my phone and in windows. I enter a code on my blackberry and enter a code in the wizard windows. Both devices and then tell me that pairing has been successful. However, the two machines are.

  Once the BB is paired, tent windows install the drivers of the two newly discovered devices, then gives me an error and States that the drivers cannot be installed. It is said that it is impossible to install two drives, both devices are listed in the device as "Bluetooth Peripheral Device" Manager (Hardware ID BTHENUM\ {426c6163-6b42-6572-7279-44736b746f70} _LOCALMFG & 000D).

  In "devices and printers > Bluetooth' BB 9700 is now listed with a status of 'troubleshooting needs'." Although the devices are paired, the BB will ever show a status of connected, rather it will continue to just try to connect every two minutes or more. I can connect to my friends MacBook, but I have no idea how to test the fact that the connection works. I also noticed that in the screen 'Add features' phone bluetooth of my roommate. So, I looked for ways to resolve the missing drivers.

  I found three solutions supposed for the driver installation error which has not WORKED for me.

  (1) the first is to right click on the two strangers 'Bluetooth' devices in Device Manager and updated the driver in both cases to "RIM Virtual Serial V2". When you try to implement this solution, the status "needs Troubleshooting" will disappear, but blackberry Device Manager will not find the BB 9700 to add for bluetooth sync. Nothing else seems to change. Complete instructions for this solution have been listed here: http://supportforums.blackberry.com/t5/BlackBerry-Pearl-BlackBerry-8100/Need-Bluetooth-Peripheral-Device-driver-to-connect-to-8120/m-p/263541

  The other way, I tried to fix the driver error problem was to remove all the listed drivers and reinstall the generic Bluetooth USB controller and the enumerator. Then I went and downloaded the Windows Mobile Device Center Driver Upgrade. For the two unknown devices labeled "Bluetooth Peripheral Device", I chose the Bluetooth radio driver > Microsoft Corporation > peripheral support Windows Mobile.  Once again, the status in devices and printers troubleshooting message > Bluetooth devices disappear, but still the Blackberry device manager can't find the phone. I found the original steps for this here: http://www.computers.nepalesemap.com/index.php?topic=3.0

  (3) supposed to be the reason why the blackberry will not sync with the ALPS driver installation is because the windows bluetooth stack does recognize it not as compatible. So I uninstall the Bluetooth devices and blackberry. I restarted and the computer reinstalls the driver ALPS.

  I found a solution which says to edit the c:\windows\inf\bth.inf file and add the hardware ID that is listed in the device under the ALPS HardwareID driver manager. I have add the ID of the hardware to the list of devices, but the bluetooth enumerator installs ever, and I can't access the Bluetooth settings.

  Does anyone else have this problem? Can anyone help!

  
  

  Hi Cptnnemo,

  How do you close the computer, you have your Blackberry?  As with any Bluetooth, the device must be 3-4 FEET away from being discovered.  Please follow the instructions on the MSFT made, then try to keep your 3-4 feet away and try the discovery mode.

  Mithdraug

• DeskJet 3050 has: updated printer driver for Windows 10

  I can't update my driver for Windows 10 (don't know if its 32 or 64 bit).  HP support to download drivers updated seems unable to detect my printer even if bluetooth is turned on for both. Any thoughts?

  Hello

  First your printer doesn't have Bluetooth? How do you connect your printer now? Please download the software and the following driver and install on your computer:

  http://ftp.HP.com/pub/softlib/software12/COL37193/al-109013-3/DJ3050A_J611_1315-1.exe

  (Select Wireless when install.) Yet once it doesn't have Bluetooth).

  Kind regards.

• HP Deskjet 3050 has J611 CN1684C location on ipad for the readmission of the wireless printer code

  do not understand the request

  Hello armeson,

  You must go to www.eprintcenter.com and set up a user account. Once you have an ePrintCenter account you can add your printer to the account with the code for the printer that you were on the list in the subject line... After you have entered the code, you will be prompted to name your printer and this name will be part of the e-mail address of your printer.

  BTW, I got the code printer removed from the subject line of this thread to protect your privacy.

• HP deskjet 3050 has J611 series and Mac Osx 10.7.1

  I am trying to install the printer hp desk jet 3050 a (series j611) and I have the mac os x 10.7. 1 operating system and it does not install. Can you help me?

  No, this is not true.  This printer is compatible to the current OS X 10.8.  Your CD may not be compatible, but...

  Download and install the latest version of the software for your printer from Driver link request at the top of this page

• HP DESKJET 3050 HAS J611 PROBS JPG SCAN

  Why this device scan all my documents in a JPG format and not a Word Doc or plain text?  Also is this device of rock?

  DOC7777 wrote: why this device scan all my documents in a JPG format and not a Word Doc or plain text?  Also is this device of rock?

  Hello DOC7777, I think that the default format for your printer is in jpg format. You can download and install the latest version of the software for your printer, if you have not already.

  There may be an option to save the scanned in a different format. Most of the scanned jpg images can be inserted into a Word document.

  Here is the link for the package full feature software/driver for your printer.

• Hi, I have a sony vaio cs series with windows vista home premium 64-bit.

  any help is appreciated very much!

  There is a problem with my laptop screen
  inside, a line (2-3mm) keeps appearing / reappearing every 2 seconds.
  the line is a reflection of the top part of my screen.
  for example, now I have my mozilla open, then the line down flashes the upper part of a mozilla window.
  I tried print screen to show the line. but the screenshot won't capture it.
  Help, please! It's very distracting... There is a problem with my graphics card?
  my laptop isn't even that old (3 months)
  Thank you very much for reading!

  It is still under warranty.  Talk to Sony, it looks like a graphics problem.  They will have to replace the motherboard if the graphic chipset is integrated.

• HP Deskjet 3050 a J611 is no longer can scan over a wireless connection

  HP Deskjet 3050 has J611; Windows 7

  Without having to install new updates - printer is< 2="" months="" old,="" the="" option="" to="" wirelessly="" connect="" to="" the="" scanner="" and="" other="" options="" disappeared.=""  scan="" and="" other="" options="" available="" when="" connected="" via="" usb.=""  wireless="" scan="" was="" working="" fine="" since="" the="" printer="" was="" purchased.=""  scan="" connection="" disapeared="" on="" a="" day="" when="" i="" had="" already="" used="" the="" wireless="">

  I've seen this question discussed on some forums without any specific problem other than to plug it in USB - which is a workaround and not an acceptable answer.

  Patches or fixes for this issue?

  Thank you

  JML

  Log in to the router to make sure it has the latest firmware.

  If this does not work, uninstall the HP software (using the uninstall program in the HP folder), restart your PC, then download and install the latest software for your printer from the "Support & drivers" link at the top of this page.

• HP Deskjet 3050 has All - in - One J610 series is not compatible with mac os x 10.8 mountain lion. need help.

  Hi I have a HP Deskjet 3050 all-in-One J610 Series a as indicated in the title, and I have the operating system Mac OS x 10.8 Mountain Lion. I need help to get or install the software hp for printing wireless setup in my dorm. Any help is very appreciated.

  Hello

  I'm not not clear with your exact printer model, it is the printer Deskjet 3050 a (J611) or model 3050 (J610) ?

  For the Deskjet 3050 J610- a complete software not available at this time.

  As there is no comprehensive software available for Mountain Lion, you will need to set up a temporary ad hoc connection and then use the EWS printer to connect the printer to your router.

  • Press the button on the control panel wireless to display the options menu on the screen of the printer wireless.
  • Select on the screen of the printer's wireless settings, then Netowrk default settings.
  • Under the same wireless and select Radio wireless and make sure to put it on.
  • From your Mac, click the WiFi icon and then click on join another network.
  • Click view networks, select the printer SSID, it will include 3050 or J610 in its name, then click on join.
  • Allow 2-3 minutes to establish the connection.
  • Open Safari and click on the favorite icon ().
  • Hello-click and then click on the name of the printer, the EWS page appears.
  • Enter the network tab.
  • Less wireless (802.11) click Wireless Setup Wizard and then click Start the wizard and follow the steps on the screen to configure the wireless connection.
    Note: If you must provide the type of security for your wireless network, you can click the WiFi icon, click Network Preferences and select the Wi - Fi network. Click Advanced, and you will find the type of security for your network in the Wi - Fi tab.
  • Once the wizard of wireless via the integrated Web server configuration is complete, click the Wi - Fi of your Mac and you connect to your router again.

  Finally, go to System Preferences > print & Scan and add the printer. confirm all calls to get the drivers from Apple servers

  For the Deskjet 3050 has (J611), be sure to connect the printer with a USB port and follow the installation below:
  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=Al-107372-1&cc=us&DLC=en&LC=en&OS=219&product=5061082&sw_lang=

  Please let me know of any problems,

  Shlomi