Similar Questions

• cannot apply the workspace of lighting effects because the disk is not available. I use Photoshop cc 2015 on OS 10.11.3

  I use Photoshop cc 2015. When I go to render the lightig effects, I get a message saying 'cannot apply lighting effects workspace because the disk is not available. I'm running on OS 10.11.3 system

  Any ideas?

  Hi Mary,

  Please take a look at the following link: Optimize performance Adobe Photoshop CC and try the steps.

  Once done, see if you still get the same error.

  Concerning

  Tanuj

• Copy the effects of the clamp does not work

  Hello

  I followed the steps described in the page below to copy and paste chained applied to a clip in first 2014 CC with no luck:

  Application, delete, find, and organize the effects

  What I've noticed, is that, in the effects of first Panel, you cannot select the chained effect.

  In addition, select the option copy after selection of the original item then selecting paste once selection of the destination element only allows you to copy the clip itself, not its effects.

  My Google search did not return any useful information on this. Some help would be appreciated.

  Thank you in advance,

  EAD

  You must also move the CTI/head of reading on the clip selected. Dough is now enabled.

• Add sound effect in the mouse on a test of Muse

  I am trying to add a sound effect when someone rolls over a button of Muse. Any help on how to do this would be greatly appreciated. The Web site must have six buttons which will each play a different sound and should work on smartphones.

  Hello

  You can create this effect with Adobe Edge animate and add it to the Muse.

  The following link might be useful:

  Adobe help Muse | Adding content on board animate

  Concerning

  Sonam

• Effects of the muse does not work in IE and the shifts contained in IE but everything is ok in all other browsers

  When I open my site in Internet Explorer the items which I have appointed as part of footer upward to the top just under the menu and behind all the other widgets in Internet Explorer, all other browsers, it works as should be. Also I turned on the effects do not appear in Internet Explorer. Any ideas? Others to stop using IE, I want to put a ban on IE to my work but can't because enterprise applications that need active x.

  Sorry the site is on a private intranet, so I can't give you a link.

  Good news is that the issue is not serious more that I thought about it on my own. I have trashed Muse, built the site in dreamweaver and it works perfectly in all browsers, so I have more blurry text, block that gets the release of Muse. So the ditch Muse was the answer.

• Sound stops when the window is not active

  I have an above (VO) voice that reads the text on a screen. As the VO happens at certain points (cuepoints) more text appears. I have a glossary of popup (dialogMIAW) that appears when the user clicks on a word in the text. So far so good. If the user clicks on a Word and the glossary opens the text continues and cuepoints are points are achieved more text appears. In other words, the program continues - which is what I want. BUT when you click on a button in the glossary of close, sounds and text stop - this is not what I want. I don't know why this happens because in this glossary MIAW are word hyperlink that the user can also click on that open upward more Windows Glossary - just like I want. It's the close button which seems to stop the sound and inturn the text (as a cuepoint is no longer reachable). This could be the cause and how can I make the noise from the stadium to continue even if the user clicks the close button?

  This is a known issue: <> http://www.adobe.com/go/tn_14717 >

• Windows 7 no upgrade no sound. indicates that the speakers are not connected, but they are connected through a HDMI cable. the computer is SonyTP3.

  Ideas:

  • upgrade to Windows 7. No sound link and intenet guard do fall although the signal strength is excellent
  • You have problems with programs
  • Error messages
  • s that you have made to your computer
  • What you have already tried to solve the problem

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  I had the same problem with my HD TV. What I've done has been updated my video card readers. I learned here that you must have your video card updated with HMDI and not by microsoft. You must go to the manufacture website and download it directly from there. I have a Dell Inspiron 1525 with an Intel 965 graphics card once I have updated driver for windows 7 everything started working.

• Effects of the copy does not work properly

  Hi all! I use Photoshop CC on my iMac running OS 10.10.5. I have something weird is going on that...... did not occur. When I work with layers and I have an effect (drop shadow and outer glow, for example)... I want to copy this effect exactly as it is to another layer. I was able to do this for years. But now, all of a sudden, when I copy the effect (hold down the option key and do drag the effect to one layer to another), it copies... but the size increases significantly. For example, I put an outer glow on a photo (size 49). I wanted this glow even on another image. I held down option and dragged the glow on the second photo effect. All the other settings copied correctly, but the size is 204... not 49. Is something new that I don't know? Or is it a setting somehow, I screwed up? Thank you.

  Julie

  If it used to work and now it back not. Try resetting all the Photoshop tools. If that does not solve your problems trying reset you the Photoshop preferences. ;

• Sound keys on the keyboard do not work

  Original title: keyboard windows 8

  the sound keys on my keyboard don't work

  Thanks for your reply pinaki Mohantry but I solved this problem by going to the services and put the human peripheral interface to automatic and the problem is solved.

• The effectiveness of the query is not stable.

  Hello

  I create an index on a field, then I execute a query operation that goes from 155 seconds by the table API.

  A few minutes later, I run the same operation with the same query conditions, passing 6 seconds!

  If I continue to run the same query operation, the time spent will be stable in 6 seconds.

  The same situation also occurred when I run the query using the CLI operation.

  What are the causes it to happen? I think that it is strange and interesting.

  Servers such as database servers are long running and so the cache is normally cold. In order to test the performance of queries when the cache is cold, it is not the normal case. Tests, if the cache is hot is usually more relevant.

  I suggest that you take a step back and ask, what is your goal as part of these tests.

  -mark

• Export, besides a few sound effects

  Hello

  An export that I did does not include some of the sound effects for the film, I added.  Some are, some aren't I slowed down some of them and tried to export only the audio but same problem is still there.

  Any help as to what is happening and how to fix would be appreciated.

  Mike

  Premiere Pro 2015.3 Release

  Mac OS X, Version 10.9.5, processor 2.5 GHz Intel Core i7, 16 GB 1600 MHz DDR3, NVIDIA GeForce GT 750 M 2048 MB graphic

  I saw this happen if you change the speed by a large amount. The solution is to change the speed a bit, the clip of nesting and change the speed of the nest a little more.

• Different sound level on the exported audio files?

  Today, I opened Audition, created a session multitrack with sampling frequency 44100KHz, 2 channels (stereo) and 32-bit depth.

  I tried to merge a part of a song with the rest of another song, but I realized that the hearing has a low sound level as Windows Media Player or any other media player.

  I looked for any configuration that could make WMP change the original sound, but he did play the song with the original sound level

  If I have the low sound of hearing was something that wouldn't stay in the exported file.

  But he did! And it was always like that, not just today.

  What should I do?

  It is not entirely clear as to where is your lower level, but if you're talking about level hearing on the mixing being 3dB lower than what happens when you play multitrack, then the answer is simple - you need to reset the pan law-3dB center left/right cut (logarithmic) - this option is in the preferences > multitrack at the top of the pane. This will give you the same level on a file drop-down mixed or exported as you see on the screen.

  But if you talk of levels of listening about, then it is very difficult to make useful comparisons to all levels of output. WMP and hearing use drivers and completely different engines, to the sounds of Windows via the Windows mixer - which changes even when reading levels. Hearing, if it goes directly to an audio device via an ASIO driver, don't get disturbed by the operating system in the slightest (that is the idea...), but if she gets plugged into the operating system for the output, then once more, the level can be changed through the Windows mixer.

  But in the final analysis, it's not really important. Hearing files can be standardized so that the peaks are just below 0 dBFS, and if you do that, they will play correctly on any other player. If they seem to be more silent, it will be because of the overall volume of the file, and it is a decision of mix - nothing to do with the format of file at all. And this is often a problem with the mixture of two songs from different sources together - if it is been compressed a lot to make it sound louder and the other does not, while the levels will never match perfectly to the join, whatever you do. Your only recourse here would be to compress the most calm one more to match the first - but that 's going to change the sound, probably in ways you might not like.

  So, quite a lot of options, really.

• Sound appear through the speakers connection adapter to Satellite P300

  I have a Satellite P300 and every time that I conect the connector AC/DC for power I hear a sound in the headphones or the speakers.

  This sounds like a terrible sound and I use the p300 to work with sound and I need help to lose this sound.

  Can anyone help me?

  Hello

  It's very strange. Are you sure that the sound comes from the speakers and not AC/DC adapter?

  For me, it sounds like a hardware problem, but before moving on to an authorized service provider be sure that the latest version of the BIOS is installed. You can download it on the Toshiba site.

  If it doesn't work you should contact an ASP. The technician can check this.

• Why the aftermath of the trial download not

  Download of the after effects of the trial will not download why?

  Do you receive an error message when you try to download?

  You can review the debate in http://forums.adobe.com/thread/993296 regarding maybe.

• having an iphone 6.  The ringtone does not make a noise.   I tested the ringtone and it sounds however when I receive a call or text or email, the Bell is silent

  I have an iphone 6.  The ringtone does not make a noise.   I tested the ringtone and it sounds however when I receive a call or text or email, the Bell is silent

  Hello Jimmy10 66,

  Thank you for reaching out to the Community Support from Apple. I know how it is important to follow your alerts, and I want to help you get your work again.

  Before we get too far, it's always a good idea to check that your 'secret' button just above your volume controls is not engaged. If you see that the yellow indicator go ahead and switch to the other position to turn it off.

  Alternatively, you can drag up from the bottom of the screen and make sure that the control of "do not disturb" is disabled.

  If those who are for the time off, go ahead and restart your phone and retest alerts. If the behaviour continues or if you encounter any problems, please reach out again and let the community know what other steps you have tried. The entire community is here to help.

  Best regards