[SPA3102] SIP recording every hour with the 401 error and directly 12 OK

Similar Questions

• BlackBerry Smartphones BB torch: call the cuts after every 1 hour with the error message: forbidden outgoing calls (8 CC)... .plz help

  The flame of my BB, cutting its call after every 1 hour with the error message: forbidden outgoing calls (8 CC). except the active calls, isn't she the netwrk...?

  Hey pemba.

  Welcome to the community of BlackBerry Support Forums.

  Thanks for the question.

  I would first check to see if you are using the latest version of the software of your network service provider.  Go to www.blackberry.com/update or open BlackBerry Desktop Software.  If the software is up to date, I would check with your provider network for more investigations.

  Let me know if you have any questions.

  See you soon.

• How to use transfer windows for xp to xp. When I plug usb computers are delivered to the top with the same screen and when I try to use the transfer to the new computer, it just said information gathering and sits for hours

  How to use transfer windows for xp to xp.  When I plug usb computers are delivered to the top with the same screen and when I try to use the transfer to the new computer, it just said information gathering and sits for hours

  Hello, welcome.

  The process is automatic and the maximum transfer rate should be about 20 GB/HR. If the process crashes during that long of a time, it's probably because of something internal rather something you're doing wrong.
  For reference purposes, I included this link. It goes into the details of the migration from XP to Vista (and the basic steps you follow). The instructions are for migrating to Vista via the network, but you can easily follow the steps and choose a different option for your specific installation.
  http://www.windowsnetworking.com/articles_tutorials/migrating-Vista-using-Windows-easy-transfer.html
  For both machines, I recommend you to prepare for the transfer using the following procedure:
  1. click on START > run

  2 type "msconfig" (without the quotes) and press enter

  3. go to the "Startup" tab and uncheck all the entries displayed

  4. click on 'Apply' at the bottom right

  DO NOT RESTART YOUR COMPUTER AGAIN

  5. click on START > run

  6. Type "cmd" (without the quotes). Right-click on the result at the top of the menu START and select 'run as administrator '.

  7. type chkdsk /r and press enter

  8 allow the system to attempt disassembly of the volume

  9. allow the system to plan restarting

  10. restart your computer

  11 let checkdisk analyze the file system on your hard drive

  12. Once completed, perform the same steps on the other machine

  13. Once completed, repeat the transfer

  
  Let us know what happens

  Thank you!

  Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• We moved and we lost the record to go with the microsoft download number modules to our new computer and it will not let us download micro Word > how do we get this registration?

  We moved and we lost the record to go with the microsoft download number modules to our new computer and it will not let us download micro Word > how do we get this registration?

  Unfortunately, if you have lost the product keys for Microsoft software, you will need to buy new software.  Visit the Microsoft store on genuine Microsoft software.

• When you add a Segment to the canvas of the campaign, you would add members every hour until the campaign turned in what scenario?

  Hello

  When you add a Segment to the canvas of the campaign, you would add members every hour until the campaign turned in what scenario?

  Thank you

  Hello...

  The segment will have new members added periodically, and you want that they are added to the campaign as soon as it happens

  Thank you

  edynamic expert Eloqua

• Hi, I need to activate my Adobe CS3 on a new computer because my old is dead and I'm having trouble. Tried the average normal recording then connected with my Adobe ID and can see the software code and activation already registered. How to get o

  Hi, I need to activate my Adobe CS3 on a new computer because my old is dead and I'm having trouble. Tried the average normal recording then connected with my Adobe ID and can see the software code and activation already registered. How to get it on my computer saved?

  If your two activation is used, you need to call Adobe. Install CS3 point of activation and call Adobe at this time here.  They help in cases like your My drive crashed and I replaced it. Could not disable the activation of the accident.  I've done that twice in the years I use PS for about 20 years

  To see your key, you must click on the product in your products and services Adobe page.

• I upgraded from Dreamweaver CS4 to CS6. but now "a Technical error occurred - cannot connect to the host. I spent hours with the technician of the host and we can't find the error. I reinstalled DW4 and it connects to accommodate perfectly. Anyone else se

  I upgraded from Dreamweaver CS4 to CS6. but now when I want to download, I "MFP error - cannot establish a connection to the host. I spent hours with the technician of the host and we can't find the error. I reinstalled DW4 and it connects to accommodate perfectly. Anyone else seen this problem?

  Mac OS 10.8.5

  
  None of these issues are causing the error in DW CS6. We double-checked all of them and we did everything right. Also I have exactly the same SiteSetup in DW CS4 and that works perfectly well. Might need to factor 6 which did not exist in the 4? Something that is not in the SiteSetup but in a hidden dialog box?

  I can also download my host using Fetch, a third party FTP. And like I said that DW CS4 works very well. So the problem is not with my host, sound with DW CS6 in particular.

  You are most likely missing something fairly simple (some goofy box cache you in some menus random). The best way to solve this problem, without playing 20 questions...

  1 open the site in DWCS4 and go to Site > Manage Sites > export to create a your site settings .ste file.

  2. close DWCS4 and open DWCS6

  3. go to the Site > Manage Sites > Import to import the .ste file to create a new site at DWCS6

  This will create an exact copy of your CS4 settings in CS6. If it still does not work, let know us and someone should have another idea for you.

• How to solve the problem with the BSOD errors of memory?

  Original title: Windows 7 BSOD "memory management".

  So basically, I made a similar post about 3/4 weeks ago and only received assistance to a certain extent.

  My problem is that I get a BSOD "memory management".
  Dumps are here for you to watch (you need to perhaps copy and paste the link in your URL):
  https://SkyDrive.live.com/redir?RESID=871E879B9D5671EC! 186 & authkey =! AL1N44iVMCM3JFw

  My OS is Windows 7 Pro.

  There are a few changes I made in recent weeks. Before, I had a Netgear USB wireless adapter and when I had that my PC had this crash at least once a day. But I now have a TP-Link wireless card. However, my PC crashes again every 3 days, no more and no less. Weird huh?

  Record PC hardware:
  Power supply 650W Powercool,
  Motherboard Asus M5970 Pro
  AMD processor with Six cores bulldozer 6100 3.3 GHZ
  Corsair Vengeance 8 GB 1600 MHZ RAM.
  Western Digital drive hard 500 GB.
  Western Digital 250 GB hard disk
  SAPPHIRE RADEON HD 7750 1 GB graphics card

  I also tried to buy the new RAM, but this did not improve the situation. I still had the accident itself, so I changed back to my old RAM and got a refund because the question is obviously not with the memory RAM (so please not a single mention to run the memtest).

  In addition, with the second disc HARD (250 GB) connected inside with my XP on, sometimes I hear it make a noise as if it is off, which is obviously because of the PSU not put enough power, I read about the BSOD memory management can easily be solved by upgrading the PSU and just want to collect some more experienced opinions before eventually trying this , I really don't want to buy a whole new PSU and then send it again that the problem is still happening (like I did with the RAM).

  
  I arrived at my own theory that perhaps I may need to lower the frequency of the RAM in my BIOS, or maybe overclock. If someone could help, it would be great. Thanks to all in advance

  The trickiest part is the every three days, not more not less. I shouldn't have overlooked than before.
  This could possibly come from a program that tries to access Windows or the
  Internet in this time (automatic update?). Perhaps something to do with your wireless network card, or even something like your anti-virus.

  "Hmm maybe it's the question then? the RAM is running at 1600 mhz, and even if my processor is a 3.3 Ghz, it is still running at 3.6 Ghz (even if I haven't myself)"
  Ooops sorry :) - looks like I got confused somehow your message with one using a Phenom 945.
  Your processor can execute with a max of 1866 Mhz RAM, but your mobo still has a 1333 Mhz max
  If the system is not what OC'd
  The 3.6 Ghz is "turbo" (auto overclocking) processor speed. If the speed of the cpu is still at 3.6 Ghz
  Perhaps because of the RAM being set at 1600 Mhz. If you set the RAM by default in the BIOS, it won't
  stop the cpu of the use of turbo mode when he needs extra grunt.
  It is also possible (I have not used a processor with turbo, then only speculate) the cpu OC is the RAM at 1600 Mhz in turbo mode.
  This could be checked if the speed of the RAM is the default value (which would be 1066 or 1333 Mhz)
  in the BIOS.
  The mini dumps have nothing conclusive. That there is a memory management problem. They suggest a possible driver conflict but cannot identify the driver.
  A possible such driver comes with Daemon tools. If you have Daemon tools installed, then
  the link below shows how to get rid of the driver.

  BSOD in the use of the high memory, fltmgr.sys - Windows 7-Forums

  A msinfo32 report is usually suggested to be included with the mini dump and can
  reveal something more.

  .

• Listener refused the connection with the following error: 12505

  Hello experts,
  
  I am facing the problem for the last two days, when I'm trying to connect to the oracle with sql developer and Jdeveloper database. Previously, it was running fing.
  
  The description of the detal problem is
  
  To perform the requested operation, an error has occurred:
  
  Listener refused the connection with the following error:
  ORA-12505, TNS:listener is not currently of SID given in connect descriptor
  
  
  Code provider 12505
  
  I tested the following text, and every thing seems fine
  ==============================================================
  
  E:\Users\Anutosh > lsnrctl services
  
  LSNRCTL for 32-bit Windows: Version 11.2.0.1.0 - Production on August 25, 2012 20:25:34
  
  Copyright (c) 1991, 2010, Oracle. All rights reserved.
  
  Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = IPC) (KEY = EXTPROC1521)))
  Summary of services...
  Service 'CLRExtProc' has 1 instance (s).
  Instance of 'CLRExtProc', status UNKNOWN, has 1 operation for this service...
  Managers:
  "DEDICATED" set up: 0 denied: 0
  LOCAL SERVER
  The command completed successfully
  
  E:\Users\Anutosh > lsnrctl status
  
  LSNRCTL for 32-bit Windows: Version 11.2.0.1.0 - Production on August 25, 2012 20:26:13
  
  Copyright (c) 1991, 2010, Oracle. All rights reserved.
  
  Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = IPC) (KEY = EXTPROC1521)))
  STATUS of the LISTENER
  ------------------------
  Alias LISTENER
  Version TNSLSNR for 32-bit Windows: Version 11.2.0.1.0 - Production
  Start date August 25, 2012 19:04:12
  Uptime 0 days 1 hour 22 min 1 s
  Draw level off
  Security ON: OS Local Authentication
  SNMP OFF
  D:\app\Anutosh\product\11.2.0\dbhome_1\network\admin\listener.ora Listener parameter file
  D:\app\anutosh\diag\tnslsnr\MTECH\listener\alert\log.XML log listener
  Summary of endpoints listening...
  (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1521ipc)))
  (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=127.0.0.1) (PORT = 1521)))
  Summary of services...
  Service 'CLRExtProc' has 1 instance (s).
  Instance of 'CLRExtProc', status UNKNOWN, has 1 operation for this service...
  The command completed successfully
  
  E:\Users\Anutosh > tnsping orcl
  
  AMT Ping Utility for 32-bit Windows: Version 11.2.0.1.0 - Production on August 25, 2012 21:35:44
  
  Copyright (c) 1997, 2010, Oracle. All rights reserved.
  
  Use settings files:
  d:\app\Anutosh\product\11.2.0\dbhome_1\network\admin\sqlnet.ora
  
  
  TNSNAMES adapter used to resolve the alias
  Try to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = localhost) (PORT = 1521)) (CONNECT_DATA = (SERVER =
  
  DED
  (ED) (SERVICE_NAME = orcl)))
  OK (20 ms)
  
  Content of tnsnames.ora
  ---------------------------------------
  
  tnsnames.ora # Network Configuration file: d:\app\Anutosh\product\11.2.0\dbhome_1\network\admin\tnsnames.ora
  # Generated by Oracle configuration tools.
  
  ORACLR_CONNECTION_DATA =
  (DESCRIPTION =
  (ADDRESS_LIST =
  (ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC1521))
  )
  (CONNECT_DATA =
  (SID = CLRExtProc)
  (PRESENTATION = RO)
  )
  )
  
  ORCL =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP)(HOST = localhost) (PORT = 1521))
  (CONNECT_DATA =
  (SERVER = DEDICATED)
  (SERVICE_NAME = orcl)
  )
  )
  
  Listener.ora
  -------------------
  
  listener.ora # Network Configuration file: d:\app\Anutosh\product\11.2.0\dbhome_1\network\admin\listener.ora
  # Generated by Oracle configuration tools.
  
  SID_LIST_LISTENER =
  (SID_LIST =
  (SID_DESC =
  (SID_NAME = CLRExtProc)
  (ORACLE_HOME = d:\app\Anutosh\product\11.2.0\dbhome_1)
  (= Extproc PROGRAM)
  (ENVS = "EXTPROC_DLLS=ONLY:d:\app\Anutosh\product\11.2.0\dbhome_1\bin\oraclr11.dll")
  )
  )
  
  LISTENER =
  (DESCRIPTION_LIST =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC1521))
  (ADDRESS = (PROTOCOL = TCP)(HOST = localhost) (PORT = 1521))
  )
  )
  
  ADR_BASE_LISTENER = d:\app\Anutosh
  
  Init.ora
  ------------
  
  # Change '< ORACLE_BASE >' to point to the oracle base (that you specify to)
  (# install times)
  
  db_name = "ORCL".
  memory_target = 1 G
  process = 150
  audit_file_dest =' < ORACLE_BASE > / admin/orcl/adump '
  AUDIT_TRAIL = 'db '.
  DB_BLOCK_SIZE = 8192
  db_domain = "
  db_recovery_file_dest =' < ORACLE_BASE > / flash_recovery_area'
  db_recovery_file_dest_size = 2G
  diagnostic_dest = "< ORACLE_BASE >.
  Dispatchers ='(Protocol=TCP) (SERVICE = ORCLXDB)"
  open_cursors = 300
  Remote_login_passwordfile = 'EXCLUSIVE '.
  undo_tablespace = 'UNDOTBS1.
  # You can ensure that the control files are created on the separate physical
  features of #.
  control_files = (ora_control1, ora_control2)
  ' compatible ' 11.2.0 = ".

  Rajat says:
  How can I fix the ITI.
  Could you please suggest anything.

  no listener.ora file is necessary for the LISTENER to operate.
  move, rename, delete, or remove the listener.ora file & then reboot the system.

  each Oracle DB tries once every 60 seconds to register with EARPHONE as shown below

  tail -10 /u01/app/oracle/product/11.2.0/dbhome_1/log/diag/tnslsnr/bcm-laptop/listener/alert/log.xml
   host_addr='127.0.0.1'>
   25-AUG-2012 12:58:48 * service_update * v112 * 0
   
  
  
   25-AUG-2012 12:59:18 * service_update * v112 * 0
   
  
  

• Equium L10: Problem with the main battery and battery RTC

  Hello

  I have the Toshiba Equium L10 and it is about 14 months old and I have problems with the battery and how much time it takes after a full charge. I also have problems with the RTC battery and an ERROR 0271: check date and time settings message when I turn on the laptop.

  Regarding the battery, I can fully charge it upward in about 3 hours, but when I start to use it, apparently in the last few hours around one and a half or so and then it needs to be recharged. I can have down for about 40 minutes and then turn it off and come back later or in a day or two. How long should I expect from a fully charged battery?

  About the batttery RTC, it really becomes a pain and I only started to get the message of the ERROR 0271 start-up, in recent weeks. I can charge the battery pack and then leave for a few days, but when I turn it on, I get the message ERROR 0271 on the date and time incorrect. Surely after a full charge, the RTC battery should last longer than a few days?

  The manual says that if the RTC battery is exhausted or becomes weak, you must charge the battery of the CCF for 24 hours, in a different part of this manual indicates between 24 and 48 hours, but how can load you for long when the sections concerning the charging battery pack status after charging the battery you unplug the power adapter because leaving connected will shorten the life expectancy of the Battery Pack. So, how we can charge the battery of the CCF for 24 to 48 hours if we shouldn't leave the AC adapter plugged in once the battery is charged - which is nearly three hours. Suggestions about these problems would be appreciated.

  Besides we all know that it is easy to change the CMOS/RTC battery in your desktop base unit, but is it easy to change in a Toshiba Equium L10?

  Concerning

  Brave0

  Hi Brave0,

  The normal recommendation for the CMOS (RTC) battery is to leave the laptop connected to the power supply at least 12 hours when the main battery is fully charged. The charging circuit is going to hijack the current to the load automatically RTC battery and no current will be forwarded to your main battery.

  Recommendation do not leave the power adapter is plugged in the main battery is fully charged is really only applicable to older laptops that used no batteries Li - ion and therefore they had to be completely discharged before recharging to avoid any effect 'memory' of the battery.

  With modern Li-ion batteries, it is quite safe to leave the battery when fully charged and still power the laptop from the AC adapter. The charging circuit will pass all the battery charge if it is fully charged.

  Kind regards

• Unable to connect to the internet with the NETWORK card and Windows Millennium Edition.

  Hello

  I turned on my old computer yesterday, who has installed Windows Millennium Edition. At the back of the computer is an Ethernet port which is marked as LIEN ACT. The NIC with this port is Realtek 8139 PCI Fast Internet Adapter. I spend two hours on the Internet configuration and I did and finally got connected, but then, a few hours after, something went wrong and the Internet and the NETWORK card has stopped working! And the card has disappeared from the Device Manager, but he's still showing in network in Control Panel. I opened the computer and I reconnected it to the slot, but it did not help. At the back of the computer next to this port are two LEDs - green indicates the power that lights up when I plug the Internet cable and the other orange indicates actual connection. But now these two LEDs are not indicating something even when I plugged in the cable to the Internet, which comes from my router. In the computer a Dial Up connection PCI is installed too, but I disabled it. I used Dial-Up in 2002. So, I need help.
  But I know that I can connect with this Ethernet card to the Internet because it worked for 3 hours, I've loaded the pages and downloaded programs.
  Please don't point, should I upgrade Windows!
  Thank you.

  Hi friend,
  You can try a Bing search on connectivity to Win ME, I don't know there are still a few old sites that are not taken down you will find a few FAQ on.
  I saw not a ME machine in too many years to count!
  Good luck on your adventure.
  B Eddie

• never had a disc of windows vista with the new laptop and no option to make a recovery disk, and I need to format my laptop to factory / clean, help!

  never had a disc of windows vista with the new laptop and no option to make a recovery disk, and I need to format my laptop to factory / clean, help!

  How to get Vista recovery Media and/or to use the Vista recovery Partition on your computer.

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Ask them if you can also make recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their way of doing recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon.

  Mick Murphy - Microsoft partner

• I get an error message: The Nvidia OpenGL driver lost connection with the display driver and can not continue. Error code 8

  When I play the virtual Interactiver - Second Life Community. The screen turns white and windows tells me the display adapter stopped responding and has recovered. While the second life Viewer is still Virgin (white). I get the error in a box: The Nvidia OpenGL driver lost connection with the display driver and can not continue. The application must close. Please visit http://www.nvidia.com/page/support.html for help. Error code 8. Now, I worked with Nvidia to do a clean install of the latest version of the driver. a driver in safe mode installation. They suggested to try an earlier version of the driver. Nothing that they worked me and told me to see Microsoft. The pilot hangs every 30 min or so, all online in the second game of life. Can someone help me?

  Information System
  ------------------
  Time of this report: 13/06/2011, 19:40:20
  Machine name: BEN - PC
  Operating system: Windows 7 Professional 64-bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.110408) - 1631
  Language: English (regional setting: English)
  System manufacturer: HP-Pavilion
  System model: GC670AA-ABA a6120n
  BIOS: Phoenix - AwardBIOS v6.00PG
  Processor: Intel (r) Core (TM) 2 Duo CPU E4400 @ 2.00 GHz (2 CPUs), ~2.0GHz
  Memory: 4096 MB RAM
  Available OS memory: 3582MB RAM
  Page file: 1690MB used, 5472 MB of available space
  Windows Dir: C:\Windows
  DirectX version: DirectX 11
  DX setup parameters: not found
  User DPI setting: 96 DPI (100%)
  System DPI setting: 96 DPI (100%)
  DWM DPI Scaling: disabled
  DxDiag Version: 6.01.7601.17514 64 bit Unicode

  Two monitors

  Display devices
  ---------------
  Card name: NVIDIA GeForce 7600 GT
  Manufacturer: NVIDIA
  Track type: GeForce 7600 GT
  DAC type: Integrated RAMDAC
  The device key: Enum\PCI\VEN_10DE & DEV_0391 & SUBSYS_201F19F1 & REV_A1
  Memory display: 1768 MB
  Dedicated memory: 248 MB
  Shared memory: 1519 MB
  Current mode: 1600 x 900 (32 bit) (60 Hz)
  Name of the monitor: generic PnP monitor
  Monitor model: G205H (Acer)

  Card name: NVIDIA GeForce 7600 GT
  Manufacturer: NVIDIA
  Track type: GeForce 7600 GT
  DAC type: Integrated RAMDAC
  The device key: Enum\PCI\VEN_10DE & DEV_0391 & SUBSYS_201F19F1 & REV_A1
  Memory display: 1768 MB
  Dedicated memory: 248 MB
  Shared memory: 1519 MB
  Current mode: 1280 x 1024 (32 bit) (60 Hz)
  Name of the monitor: generic PnP monitor
  Monitor model: NEC LCD7V

  Hello

  I suggest that you have watch the following link below:

  http://forums.developer.nvidia.com/index.php?showtopic=5331

  I hope this helps.

• Every time using the ', it displays "and «»

  original title: why is my ' button always keep changing?

  A simple problem I guess, but as a writer, it is very annoying.  Whenever I'm trying to use the ', it displays "and" "when I hold down the SHIFT key.  I have to delete the extra apostrophe to an apostrophe.  How can I change, so it's a single apostrophe instead of quotes at all times.  I played with the language toolbar and every time I spend in the US instead of US International, it fixes the problem... only temporarily.  How can I make it permanent?  Thanks for the help in advance.

  Hi Spundae,

  Welcome to the Microsoft Community and thanks for posting the question.

  According to the description, it looks like a character is typed when you use a single apostrophe.

  I have a link that should guide you in the right direction.

  Visit the link and indicate "the keys do not collide correctly" and "the wrong characters are typed.

  http://support.Microsoft.com/kb/258826

  Keep us updated on the status of the issue. For any help about Windows, you can still post on the Microsoft Community.

• Having a problem with the script error message

  The error message and web page script error every move I make now. I tried to check and uncheck boxes tab in advance internet options. I also ran a check of the system that did not help either. Any suggestions? Thank you

  Hi Mic,

  From the description, it seems that you have a problem with the script error message in Internet Explorer.

  To better understand the question, please answer the following questions:

  1. is specific to a particular Web site question?

  2 have you made changes on the computer before this problem?

  3. What is the exact full error message and web page of script error message?

  4. When you get exactly the script error message and web page error message appears?

  5. what exactly you're talking about when you say "system check"?

  See the article mentioned:

  How to troubleshoot script errors in Internet Explorer

  http://support.Microsoft.com/kb/308260

  Hope the above information is helpful. If you have any question back to us, we are happy to help you.